summaryrefslogtreecommitdiff
path: root/src/drivers/usb/gadget.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/drivers/usb/gadget.c')
-rw-r--r--src/drivers/usb/gadget.c38
1 files changed, 18 insertions, 20 deletions
diff --git a/src/drivers/usb/gadget.c b/src/drivers/usb/gadget.c
index c6a89bf5c0..fcb361cc83 100644
--- a/src/drivers/usb/gadget.c
+++ b/src/drivers/usb/gadget.c
@@ -8,8 +8,6 @@
#include "usb_ch9.h"
#include "ehci.h"
-#define dprintk printk
-
#define USB_HUB_PORT_CONNECTION 0
#define USB_HUB_PORT_ENABLED 1
#define USB_HUB_PORT_RESET 4
@@ -144,13 +142,13 @@ debug_dev_retry:
if (dbgp_desc.bLength == sizeof(dbgp_desc) && dbgp_desc.bDescriptorType == USB_DT_DEBUG)
goto debug_dev_found;
else
- dprintk(BIOS_INFO, "Invalid debug device descriptor.\n");
+ printk(BIOS_INFO, "Invalid debug device descriptor.\n");
}
if (devnum == 0) {
devnum = USB_DEBUG_DEVNUM;
goto debug_dev_retry;
} else {
- dprintk(BIOS_INFO, "Could not find attached debug device.\n");
+ printk(BIOS_INFO, "Could not find attached debug device.\n");
return -1;
}
debug_dev_found:
@@ -161,12 +159,12 @@ debug_dev_found:
USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
USB_REQ_SET_ADDRESS, USB_DEBUG_DEVNUM, 0, NULL, 0);
if (ret < 0) {
- dprintk(BIOS_INFO, "Could not move attached device to %d.\n",
+ printk(BIOS_INFO, "Could not move attached device to %d.\n",
USB_DEBUG_DEVNUM);
return -2;
}
devnum = USB_DEBUG_DEVNUM;
- dprintk(BIOS_INFO, "EHCI debug device renamed to 127.\n");
+ printk(BIOS_INFO, "EHCI debug device renamed to 127.\n");
}
/* Enable the debug interface */
@@ -174,10 +172,10 @@ debug_dev_found:
USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
USB_REQ_SET_FEATURE, USB_DEVICE_DEBUG_MODE, 0, NULL, 0);
if (ret < 0) {
- dprintk(BIOS_INFO, "Could not enable EHCI debug device.\n");
+ printk(BIOS_INFO, "Could not enable EHCI debug device.\n");
return -3;
}
- dprintk(BIOS_INFO, "EHCI debug interface enabled.\n");
+ printk(BIOS_INFO, "EHCI debug interface enabled.\n");
pipe[DBGP_CONSOLE_EPOUT].endpoint = dbgp_desc.bDebugOutEndpoint;
pipe[DBGP_CONSOLE_EPIN].endpoint = dbgp_desc.bDebugInEndpoint;
@@ -189,7 +187,7 @@ debug_dev_found:
small_write:
ret = dbgp_bulk_write_x(&pipe[DBGP_CONSOLE_EPOUT], "USB\r\n",5);
if (ret < 0) {
- dprintk(BIOS_INFO, "dbgp_bulk_write failed: %d\n", ret);
+ printk(BIOS_INFO, "dbgp_bulk_write failed: %d\n", ret);
if (!configured) {
/* Send Set Configure request to device. This is required for FX2
(CY7C68013) to transfer from USB state Addressed to Configured,
@@ -203,7 +201,7 @@ small_write:
}
return -4;
}
- dprintk(BIOS_INFO, "Test write done\n");
+ printk(BIOS_INFO, "Test write done\n");
return 0;
}
@@ -251,19 +249,19 @@ static int probe_for_ftdi(struct ehci_dbg_port *ehci_debug, struct dbgp_pipe *pi
USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
USB_REQ_SET_ADDRESS, USB_DEBUG_DEVNUM, 0, NULL, 0);
if (ret < 0) {
- dprintk(BIOS_INFO, "Could not move attached device to %d.\n",
+ printk(BIOS_INFO, "Could not move attached device to %d.\n",
USB_DEBUG_DEVNUM);
return -2;
}
devnum = USB_DEBUG_DEVNUM;
- dprintk(BIOS_INFO, "EHCI debug device renamed to %d.\n", devnum);
+ printk(BIOS_INFO, "EHCI debug device renamed to %d.\n", devnum);
/* Send Set Configure request to device. */
ret = dbgp_control_msg(ehci_debug, devnum,
USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
USB_REQ_SET_CONFIGURATION, 1, 0, NULL, 0);
if (ret < 0) {
- dprintk(BIOS_INFO, "FTDI set configuration failed.\n");
+ printk(BIOS_INFO, "FTDI set configuration failed.\n");
return -2;
}
@@ -271,7 +269,7 @@ static int probe_for_ftdi(struct ehci_dbg_port *ehci_debug, struct dbgp_pipe *pi
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
FTDI_SIO_SET_BITMODE_REQUEST, 0, uart_if, NULL, 0);
if (ret < 0) {
- dprintk(BIOS_INFO, "FTDI SET_BITMODE failed.\n");
+ printk(BIOS_INFO, "FTDI SET_BITMODE failed.\n");
return -3;
}
ft232h_baud(&baud_value, &baud_index,
@@ -281,7 +279,7 @@ static int probe_for_ftdi(struct ehci_dbg_port *ehci_debug, struct dbgp_pipe *pi
FTDI_SIO_SET_BAUDRATE_REQUEST,
baud_value, baud_index | uart_if, NULL, 0);
if (ret < 0) {
- dprintk(BIOS_INFO, "FTDI SET_BAUDRATE failed.\n");
+ printk(BIOS_INFO, "FTDI SET_BAUDRATE failed.\n");
return -3;
}
ret = dbgp_control_msg(ehci_debug, devnum,
@@ -289,7 +287,7 @@ static int probe_for_ftdi(struct ehci_dbg_port *ehci_debug, struct dbgp_pipe *pi
FTDI_SIO_SET_DATA_REQUEST,
0x0008, uart_if, NULL, 0);
if (ret < 0) {
- dprintk(BIOS_INFO, "FTDI SET_DATA failed.\n");
+ printk(BIOS_INFO, "FTDI SET_DATA failed.\n");
return -3;
}
ret = dbgp_control_msg(ehci_debug, devnum,
@@ -297,7 +295,7 @@ static int probe_for_ftdi(struct ehci_dbg_port *ehci_debug, struct dbgp_pipe *pi
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
0x0000, uart_if, NULL, 0);
if (ret < 0) {
- dprintk(BIOS_INFO, "FTDI SET_FLOW_CTRL failed.\n");
+ printk(BIOS_INFO, "FTDI SET_FLOW_CTRL failed.\n");
return -3;
}
@@ -309,10 +307,10 @@ static int probe_for_ftdi(struct ehci_dbg_port *ehci_debug, struct dbgp_pipe *pi
/* Perform a small write. */
ret = dbgp_bulk_write_x(&pipe[DBGP_CONSOLE_EPOUT], "USB\r\n", 5);
if (ret < 0) {
- dprintk(BIOS_INFO, "dbgp_bulk_write failed: %d\n", ret);
+ printk(BIOS_INFO, "dbgp_bulk_write failed: %d\n", ret);
return -4;
}
- dprintk(BIOS_INFO, "Test write done\n");
+ printk(BIOS_INFO, "Test write done\n");
return 0;
}
@@ -335,7 +333,7 @@ int dbgp_probe_gadget(struct ehci_dbg_port *ehci_debug, struct dbgp_pipe *pipe)
ret = probe_for_debug_descriptor(ehci_debug, pipe);
}
if (ret < 0) {
- dprintk(BIOS_INFO, "Could not enable debug dongle.\n");
+ printk(BIOS_INFO, "Could not enable debug dongle.\n");
return ret;
}
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 02:23:13 +0000