1 files changed, 111 insertions, 0 deletions
diff --git a/src/drivers/uart/oxpcie_early.c b/src/drivers/uart/oxpcie_early.c
new file mode 100644
index 0000000000..b81fa8914d
--- /dev/null
+++ b/src/drivers/uart/oxpcie_early.c
@@ -0,0 +1,111 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Google Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#define __SIMPLE_DEVICE__
+
+#include <stdint.h>
+#include <stddef.h>
+#include <arch/io.h>
+#include <arch/early_variables.h>
+#include <boot/coreboot_tables.h>
+#include <console/uart.h>
+#include <device/pci.h>
+#include <device/pci_def.h>
+
+static unsigned int oxpcie_present CAR_GLOBAL;
+static ROMSTAGE_CONST u32 uart0_base = CONFIG_EARLY_PCI_MMIO_BASE + 0x1000;
+static ROMSTAGE_CONST u32 uart1_base = CONFIG_EARLY_PCI_MMIO_BASE + 0x2000;
+
+int pci_early_device_probe(u8 bus, u8 dev, u32 mmio_base)
+{
+	pci_devfn_t device = PCI_DEV(bus, dev, 0);
+
+	u32 id = pci_read_config32(device, PCI_VENDOR_ID);
+	switch (id) {
+	case 0xc1181415: /* e.g. Startech PEX1S1PMINI function 0 */
+		/* On this device function 0 is the parallel port, and
+		 * function 3 is the serial port. So let's go look for
+		 * the UART.
+		 */
+		device = PCI_DEV(bus, dev, 3);
+		id = pci_read_config32(device, PCI_VENDOR_ID);
+		if (id != 0xc11b1415)
+			return -1;
+		break;
+	case 0xc11b1415: /* e.g. Startech PEX1S1PMINI function 3 */
+	case 0xc1581415: /* e.g. Startech MPEX2S952 */
+		break;
+	default:
+		/* No UART here. */
+		return -1;
+	}
+
+	/* Sanity-check, we assume fixed location. */
+	if (mmio_base != CONFIG_EARLY_PCI_MMIO_BASE)
+		return -1;
+
+	/* Setup base address on device */
+	pci_write_config32(device, PCI_BASE_ADDRESS_0, mmio_base);
+
+	/* Enable memory on device */
+	u16 reg16 = pci_read_config16(device, PCI_COMMAND);
+	reg16 |= PCI_COMMAND_MEMORY;
+	pci_write_config16(device, PCI_COMMAND, reg16);
+
+	car_set_var(oxpcie_present, 1);
+	return 0;
+}
+
+static int oxpcie_uart_active(void)
+{
+	return (car_get_var(oxpcie_present));
+}
+
+unsigned int uart_platform_base(int idx)
+{
+	if (idx == 0 && oxpcie_uart_active())
+		return uart0_base;
+	if (idx == 1 && oxpcie_uart_active())
+		return uart1_base;
+	return 0;
+}
+
+#ifndef __PRE_RAM__
+void oxford_remap(u32 new_base)
+{
+	uart0_base = new_base + 0x1000;
+	uart1_base = new_base + 0x2000;
+}
+
+void uart_fill_lb(void *data)
+{
+	struct lb_serial serial;
+	serial.type = LB_SERIAL_TYPE_MEMORY_MAPPED;
+	serial.baseaddr = uart_platform_base(0);
+	serial.baud = default_baudrate();
+	lb_add_serial(&serial, data);
+
+	lb_add_console(LB_TAG_CONSOLE_SERIAL8250MEM, data);
+}
+#endif
+
+unsigned int uart_platform_refclk(void)
+{
+	return 62500000;
+}