diff options
Diffstat (limited to 'src/drivers/ti/sn65dsi86bridge')
| -rw-r--r-- | src/drivers/ti/sn65dsi86bridge/sn65dsi86bridge.c | 16 |
1 files changed, 8 insertions, 8 deletions
diff --git a/src/drivers/ti/sn65dsi86bridge/sn65dsi86bridge.c b/src/drivers/ti/sn65dsi86bridge/sn65dsi86bridge.c index a0fcf11a8e..806e9b20ab 100644 --- a/src/drivers/ti/sn65dsi86bridge/sn65dsi86bridge.c +++ b/src/drivers/ti/sn65dsi86bridge/sn65dsi86bridge.c @@ -194,13 +194,13 @@ static cb_err_t sn65dsi86_bridge_aux_request(uint8_t bus, return CB_ERR; if (!wait_ms(100, !i2c_readb(bus, chip, SN_AUX_CMD_REG, &buf) && !(buf & AUX_CMD_SEND))) { - printk(BIOS_ERR, "ERROR: AUX_CMD_SEND not acknowledged\n"); + printk(BIOS_ERR, "AUX_CMD_SEND not acknowledged\n"); return CB_ERR; } if (i2c_readb(bus, chip, SN_AUX_CMD_STATUS_REG, &buf)) return CB_ERR; if (buf & (NAT_I2C_FAIL | AUX_SHORT | AUX_DFER | AUX_RPLY_TOUT)) { - printk(BIOS_ERR, "ERROR: AUX command failed, status = %#x\n", buf); + printk(BIOS_ERR, "AUX command failed, status = %#x\n", buf); return CB_ERR; } @@ -230,7 +230,7 @@ cb_err_t sn65dsi86_bridge_read_edid(uint8_t bus, uint8_t chip, struct edid *out) err = sn65dsi86_bridge_aux_request(bus, chip, EDID_I2C_ADDR, EDID_LENGTH, I2C_RAW_READ_AND_STOP, edid); if (err) { - printk(BIOS_ERR, "ERROR: Failed to read EDID.\n"); + printk(BIOS_ERR, "Failed to read EDID.\n"); return err; } @@ -249,7 +249,7 @@ cb_err_t sn65dsi86_bridge_read_edid(uint8_t bus, uint8_t chip, struct edid *out) } if (decode_edid(edid, edid_size, out) != EDID_CONFORMANT) { - printk(BIOS_ERR, "ERROR: Failed to decode EDID.\n"); + printk(BIOS_ERR, "Failed to decode EDID.\n"); return CB_ERR; } @@ -364,7 +364,7 @@ static void sn65dsi86_bridge_set_dp_clock_range(uint8_t bus, uint8_t chip, if (dp_rate_idx < ARRAY_SIZE(sn65dsi86_bridge_dp_rate_lut)) i2c_write_field(bus, chip, SN_DATARATE_CONFIG_REG, dp_rate_idx, 8, 5); else - printk(BIOS_ERR, "ERROR: valid dp rate not found"); + printk(BIOS_ERR, "valid dp rate not found"); } static void sn65dsi86_bridge_set_bridge_active_timing(uint8_t bus, @@ -407,7 +407,7 @@ static void sn65dsi86_bridge_link_training(uint8_t bus, uint8_t chip) if (!wait_ms(500, !(i2c_readb(bus, chip, SN_DPPLL_SRC_REG, &buf)) && (buf & BIT(7)))) { - printk(BIOS_ERR, "ERROR: PLL lock failure\n"); + printk(BIOS_ERR, "PLL lock failure\n"); } /* @@ -426,14 +426,14 @@ static void sn65dsi86_bridge_link_training(uint8_t bus, uint8_t chip) if (!wait_ms(500, !(i2c_readb(bus, chip, SN_ML_TX_MODE_REG, &buf)) && (buf == NORMAL_MODE || buf == MAIN_LINK_OFF))) { - printk(BIOS_ERR, "ERROR: unexpected link training state: %#x\n", buf); + printk(BIOS_ERR, "unexpected link training state: %#x\n", buf); return; } if (buf == NORMAL_MODE) return; } - printk(BIOS_ERR, "ERROR: Link training failed 10 times\n"); + printk(BIOS_ERR, "Link training failed 10 times\n"); } void sn65dsi86_backlight_enable(uint8_t bus, uint8_t chip) |