summaryrefslogtreecommitdiff
path: root/src/drivers/ti/sn65dsi86bridge/sn65dsi86bridge.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/drivers/ti/sn65dsi86bridge/sn65dsi86bridge.c')
-rw-r--r--src/drivers/ti/sn65dsi86bridge/sn65dsi86bridge.c78
1 files changed, 5 insertions, 73 deletions
diff --git a/src/drivers/ti/sn65dsi86bridge/sn65dsi86bridge.c b/src/drivers/ti/sn65dsi86bridge/sn65dsi86bridge.c
index 2ba0977547..c4c4088023 100644
--- a/src/drivers/ti/sn65dsi86bridge/sn65dsi86bridge.c
+++ b/src/drivers/ti/sn65dsi86bridge/sn65dsi86bridge.c
@@ -4,6 +4,7 @@
#include <delay.h>
#include <endian.h>
#include <device/i2c_simple.h>
+#include <dp_aux.h>
#include <edid.h>
#include <timer.h>
#include <types.h>
@@ -31,14 +32,6 @@
#define DP_MAX_SUPPORTED_RATES 8 /* 16-bit little-endian */
#define DP_LANE_COUNT_MASK 0xf
-/* Backlight configuration */
-#define DP_BACKLIGHT_MODE_SET 0x721
-#define DP_BACKLIGHT_CONTROL_MODE_MASK 0x3
-#define DP_BACKLIGHT_CONTROL_MODE_DPCD 0x2
-#define DP_DISPLAY_CONTROL_REGISTER 0x720
-#define DP_BACKLIGHT_ENABLE 0x1
-#define DP_BACKLIGHT_BRIGHTNESS_MSB 0x722
-
/* link configuration */
#define DP_LINK_BW_SET 0x100
#define DP_LINK_BW_1_62 0x06
@@ -132,17 +125,6 @@ enum vstream_config {
VSTREAM_ENABLE = 1,
};
-enum i2c_over_aux {
- I2C_OVER_AUX_WRITE_MOT_0 = 0x0,
- I2C_OVER_AUX_READ_MOT_0 = 0x1,
- I2C_OVER_AUX_WRITE_STATUS_UPDATE_0 = 0x2,
- I2C_OVER_AUX_WRITE_MOT_1 = 0x4,
- I2C_OVER_AUX_READ_MOT_1 = 0x5,
- I2C_OVER_AUX_WRITE_STATUS_UPDATE_1 = 0x6,
- NATIVE_AUX_WRITE = 0x8,
- NATIVE_AUX_READ = 0x9,
-};
-
enum aux_cmd_status {
NAT_I2C_FAIL = 1 << 6,
AUX_SHORT = 1 << 5,
@@ -166,21 +148,6 @@ enum ml_tx_mode {
REDRIVER_SEMI_AUTO_LINK_TRAINING = 0xb,
};
-enum aux_request {
- DPCD_READ,
- DPCD_WRITE,
- I2C_RAW_READ,
- I2C_RAW_WRITE,
- I2C_RAW_READ_AND_STOP,
- I2C_RAW_WRITE_AND_STOP,
-};
-
-enum {
- EDID_LENGTH = 128,
- EDID_I2C_ADDR = 0x50,
- EDID_EXTENSION_FLAG = 0x7e,
-};
-
/*
* LUT index corresponds to register value and LUT values corresponds
* to dp data rate supported by the bridge in Mbps unit.
@@ -189,41 +156,6 @@ static const unsigned int sn65dsi86_bridge_dp_rate_lut[] = {
0, 1620, 2160, 2430, 2700, 3240, 4320, 5400
};
-static bool request_is_write(enum aux_request request)
-{
- switch (request) {
- case I2C_RAW_WRITE_AND_STOP:
- case I2C_RAW_WRITE:
- case DPCD_WRITE:
- return true;
- default:
- return false;
- }
-}
-
-static enum i2c_over_aux get_aux_cmd(enum aux_request request, uint32_t remaining_after_this)
-{
- switch (request) {
- case I2C_RAW_WRITE_AND_STOP:
- if (!remaining_after_this)
- return I2C_OVER_AUX_WRITE_MOT_0;
- /* fallthrough */
- case I2C_RAW_WRITE:
- return I2C_OVER_AUX_WRITE_MOT_1;
- case I2C_RAW_READ_AND_STOP:
- if (!remaining_after_this)
- return I2C_OVER_AUX_READ_MOT_0;
- /* fallthrough */
- case I2C_RAW_READ:
- return I2C_OVER_AUX_READ_MOT_1;
- case DPCD_WRITE:
- return NATIVE_AUX_WRITE;
- case DPCD_READ:
- default:
- return NATIVE_AUX_READ;
- }
-}
-
static cb_err_t sn65dsi86_bridge_aux_request(uint8_t bus,
uint8_t chip,
unsigned int target_reg,
@@ -241,10 +173,10 @@ static cb_err_t sn65dsi86_bridge_aux_request(uint8_t bus,
NAT_I2C_FAIL | AUX_SHORT | AUX_DFER | AUX_RPLY_TOUT | SEND_INT);
while (total_size) {
- length = MIN(total_size, 16);
+ length = MIN(total_size, DP_AUX_MAX_PAYLOAD_BYTES);
total_size -= length;
- enum i2c_over_aux cmd = get_aux_cmd(request, total_size);
+ enum i2c_over_aux cmd = dp_get_aux_cmd(request, total_size);
if (i2c_writeb(bus, chip, SN_AUX_CMD_REG, (cmd << 4)) ||
i2c_writeb(bus, chip, SN_AUX_ADDR_19_16_REG, (target_reg >> 16) & 0xF) ||
i2c_writeb(bus, chip, SN_AUX_ADDR_15_8_REG, (target_reg >> 8) & 0xFF) ||
@@ -252,7 +184,7 @@ static cb_err_t sn65dsi86_bridge_aux_request(uint8_t bus,
i2c_writeb(bus, chip, SN_AUX_LENGTH_REG, length))
return CB_ERR;
- if (request_is_write(request)) {
+ if (dp_aux_request_is_write(request)) {
reg = SN_AUX_WDATA_REG_0;
for (i = 0; i < length; i++)
if (i2c_writeb(bus, chip, reg++, *data++))
@@ -273,7 +205,7 @@ static cb_err_t sn65dsi86_bridge_aux_request(uint8_t bus,
return CB_ERR;
}
- if (!request_is_write(request)) {
+ if (!dp_aux_request_is_write(request)) {
reg = SN_AUX_RDATA_REG_0;
for (i = 0; i < length; i++) {
if (i2c_readb(bus, chip, reg++, &buf))