summaryrefslogtreecommitdiff
path: root/src/drivers/spi
diff options
context:
space:
mode:
Diffstat (limited to 'src/drivers/spi')
-rw-r--r--src/drivers/spi/tpm/tpm.c42
1 files changed, 33 insertions, 9 deletions
diff --git a/src/drivers/spi/tpm/tpm.c b/src/drivers/spi/tpm/tpm.c
index 5abfc4558f..b2bda8c928 100644
--- a/src/drivers/spi/tpm/tpm.c
+++ b/src/drivers/spi/tpm/tpm.c
@@ -105,12 +105,15 @@ void tpm2_get_info(struct tpm2_info *info)
/*
* Each TPM2 SPI transaction starts the same: CS is asserted, the 4 byte
* header is sent to the TPM, the master waits til TPM is ready to continue.
+ *
+ * Returns 1 on success, 0 on failure (TPM SPI flow control timeout.)
*/
-static void start_transaction(int read_write, size_t bytes, unsigned addr)
+static int start_transaction(int read_write, size_t bytes, unsigned addr)
{
spi_frame_header header;
uint8_t byte;
int i;
+ struct stopwatch sw;
/*
* Give it 10 ms. TODO(vbendeb): remove this once cr50 SPS TPM driver
@@ -159,10 +162,20 @@ static void start_transaction(int read_write, size_t bytes, unsigned addr)
*/
tpm_if.xfer(&tpm_if.slave, header.body, sizeof(header.body), NULL, 0);
- /* Now poll the bus until TPM removes the stall bit. */
+ /*
+ * Now poll the bus until TPM removes the stall bit. Give it up to 100
+ * ms to sort it out - it could be saving stuff in nvram at some
+ * point.
+ */
+ stopwatch_init_msecs_expire(&sw, 100);
do {
+ if (stopwatch_expired(&sw)) {
+ printk(BIOS_ERR, "TPM flow control failure\n");
+ return 0;
+ }
tpm_if.xfer(&tpm_if.slave, NULL, 0, &byte, 1);
} while (!(byte & 1));
+ return 1;
}
/*
@@ -243,13 +256,13 @@ static void read_bytes(void *buffer, size_t bytes)
* To write a register, start transaction, transfer data to the TPM, deassert
* CS when done.
*
- * Returns one to indicate success, zero (not yet implemented) to indicate
- * failure.
+ * Returns one to indicate success, zero to indicate failure.
*/
static int tpm2_write_reg(unsigned reg_number, const void *buffer, size_t bytes)
{
trace_dump("W", reg_number, bytes, buffer, 0);
- start_transaction(false, bytes, reg_number);
+ if (!start_transaction(false, bytes, reg_number))
+ return 0;
write_bytes(buffer, bytes);
tpm_if.cs_deassert(&tpm_if.slave);
return 1;
@@ -259,12 +272,14 @@ static int tpm2_write_reg(unsigned reg_number, const void *buffer, size_t bytes)
* To read a register, start transaction, transfer data from the TPM, deassert
* CS when done.
*
- * Returns one to indicate success, zero (not yet implemented) to indicate
- * failure.
+ * Returns one to indicate success, zero to indicate failure.
*/
static int tpm2_read_reg(unsigned reg_number, void *buffer, size_t bytes)
{
- start_transaction(true, bytes, reg_number);
+ if (!start_transaction(true, bytes, reg_number)) {
+ memset(buffer, 0, bytes);
+ return 0;
+ }
read_bytes(buffer, bytes);
tpm_if.cs_deassert(&tpm_if.slave);
trace_dump("R", reg_number, bytes, buffer, 0);
@@ -305,7 +320,12 @@ int tpm2_init(struct spi_slave *spi_if)
memcpy(&tpm_if.slave, spi_if, sizeof(*spi_if));
- tpm2_read_reg(TPM_DID_VID_REG, &did_vid, sizeof(did_vid));
+ /*
+ * It is enough to check the first register read error status to bail
+ * out in case of malfunctioning TPM.
+ */
+ if (!tpm2_read_reg(TPM_DID_VID_REG, &did_vid, sizeof(did_vid)))
+ return -1;
/* Try claiming locality zero. */
tpm2_read_reg(TPM_ACCESS_REG, &cmd, sizeof(cmd));
@@ -485,6 +505,10 @@ size_t tpm2_process_command(const void *tpm2_command, size_t command_size,
union fifo_transfer_buffer fifo_buffer;
const int HEADER_SIZE = 6;
+ /* Do not try using an uninitialized TPM. */
+ if (!tpm_info.vendor_id)
+ return 0;
+
/* Skip the two byte tag, read the size field. */
payload_size = read_be32(cmd_body + 2);