summaryrefslogtreecommitdiff
path: root/src/drivers/spi
diff options
context:
space:
mode:
Diffstat (limited to 'src/drivers/spi')
-rw-r--r--src/drivers/spi/Makefile.inc2
-rw-r--r--src/drivers/spi/tpm/Makefile.inc7
-rw-r--r--src/drivers/spi/tpm/tis.c84
-rw-r--r--src/drivers/spi/tpm/tpm.c552
-rw-r--r--src/drivers/spi/tpm/tpm.h48
5 files changed, 693 insertions, 0 deletions
diff --git a/src/drivers/spi/Makefile.inc b/src/drivers/spi/Makefile.inc
index 6697c702fb..6b4182e4e3 100644
--- a/src/drivers/spi/Makefile.inc
+++ b/src/drivers/spi/Makefile.inc
@@ -1,5 +1,7 @@
# SPI flash driver interface
+subdirs-y += tpm
+
ifeq ($(CONFIG_SPI_CONSOLE),y)
ramstage-y += spiconsole.c
smm-$(CONFIG_DEBUG_SMI) += spiconsole.c
diff --git a/src/drivers/spi/tpm/Makefile.inc b/src/drivers/spi/tpm/Makefile.inc
new file mode 100644
index 0000000000..66118be1b9
--- /dev/null
+++ b/src/drivers/spi/tpm/Makefile.inc
@@ -0,0 +1,7 @@
+verstage-$(CONFIG_SPI_TPM) += tis.c tpm.c
+
+ifneq ($(CONFIG_CHROMEOS),y)
+bootblock-$(CONFIG_SPI_TPM) += tis.c tpm.c
+romstage-$(CONFIG_SPI_TPM) += tis.c tpm.c
+ramstage-$(CONFIG_SPI_TPM) += tis.c tpm.c
+endif \ No newline at end of file
diff --git a/src/drivers/spi/tpm/tis.c b/src/drivers/spi/tpm/tis.c
new file mode 100644
index 0000000000..9facb5208b
--- /dev/null
+++ b/src/drivers/spi/tpm/tis.c
@@ -0,0 +1,84 @@
+/*
+ * Copyright 2016 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ */
+
+#include <arch/early_variables.h>
+#include <console/console.h>
+#include <string.h>
+#include <tpm.h>
+
+#include "tpm.h"
+
+static unsigned tpm_is_open CAR_GLOBAL;
+
+static const struct {
+ uint16_t vid;
+ uint16_t did;
+ const char *device_name;
+} dev_map[] = {
+ { 0x15d1, 0x001b, "SLB9670" },
+ { 0x1ae0, 0x0028, "CR50" },
+};
+
+static const char *tis_get_dev_name(struct tpm2_info *info)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(dev_map); i++)
+ if ((dev_map[i].vid == info->vendor_id) &&
+ (dev_map[i].did == info->device_id))
+ return dev_map[i].device_name;
+ return "Unknown";
+}
+
+int tis_open(void)
+{
+ if (car_get_var(tpm_is_open)) {
+ printk(BIOS_ERR, "tis_open() called twice.\n");
+ return -1;
+ }
+ return 0;
+}
+
+int tis_close(void)
+{
+ if (car_get_var(tpm_is_open)) {
+
+ /*
+ * Do we need to do something here, like waiting for a
+ * transaction to stop?
+ */
+ car_set_var(tpm_is_open, 0);
+ }
+
+ return 0;
+}
+
+int tis_init(void)
+{
+ struct tpm2_info info;
+
+ if (tpm2_init(spi_setup_slave(CONFIG_DRIVER_TPM_SPI_BUS,
+ CONFIG_DRIVER_TPM_SPI_CHIP))) {
+ printk(BIOS_ERR, "Failed to initialize TPM SPI intierface\n");
+ return -1;
+ }
+
+ tpm2_get_info(&info);
+
+ printk(BIOS_INFO, "Initialized TPM device %s revision %d\n",
+ tis_get_dev_name(&info), info.revision);
+
+ return 0;
+}
+
+
+int tis_sendrecv(const uint8_t *sendbuf, size_t sbuf_size,
+ uint8_t *recvbuf, size_t *rbuf_len)
+{
+ int len = tpm2_process_command(sendbuf, sbuf_size, recvbuf, *rbuf_len);
+ *rbuf_len = len;
+ return 0;
+}
diff --git a/src/drivers/spi/tpm/tpm.c b/src/drivers/spi/tpm/tpm.c
new file mode 100644
index 0000000000..a46042d431
--- /dev/null
+++ b/src/drivers/spi/tpm/tpm.c
@@ -0,0 +1,552 @@
+/*
+ * Copyright 2016 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ *
+ * This is a driver for a SPI interfaced TPM2 device.
+ *
+ * It assumes that the required SPI interface has been initialized before the
+ * driver is started. A 'sruct spi_slave' pointer passed at initialization is
+ * used to direct traffic to the correct SPI interface. This dirver does not
+ * provide a way to instantiate multiple TPM devices. Also, to keep things
+ * simple, the driver unconditionally uses of TPM locality zero.
+ *
+ * References to documentation are based on the TCG issued "TPM Profile (PTP)
+ * Specification Revision 00.43".
+ */
+
+#include <commonlib/endian.h>
+#include <console/console.h>
+#include <delay.h>
+#include <endian.h>
+#include <string.h>
+#include <timer.h>
+
+#include "tpm.h"
+
+/* Assorted TPM2 registers for interface type FIFO. */
+#define TPM_ACCESS_REG 0
+#define TPM_STS_REG 0x18
+#define TPM_DATA_FIFO_REG 0x24
+#define TPM_DID_VID_REG 0xf00
+#define TPM_RID_REG 0xf04
+
+/* SPI Interface descriptor used by the driver. */
+struct tpm_spi_if {
+ struct spi_slave *slave;
+ int (*cs_assert)(struct spi_slave *slave);
+ void (*cs_deassert)(struct spi_slave *slave);
+ int (*xfer)(struct spi_slave *slave, const void *dout,
+ unsigned bytesout, void *din,
+ unsigned bytesin);
+};
+
+/* Use the common SPI driver wrapper as the interface callbacks. */
+static struct tpm_spi_if tpm_if = {
+ .cs_assert = spi_claim_bus,
+ .cs_deassert = spi_release_bus,
+ .xfer = spi_xfer
+};
+
+/* Cached TPM device identification. */
+struct tpm2_info tpm_info;
+
+/*
+ * TODO(vbendeb): make CONFIG_DEBUG_TPM an int to allow different level of
+ * debug traces. Right now it is either 0 or 1.
+ */
+static const int debug_level_ = CONFIG_DEBUG_TPM;
+
+/* Locality management bits (in TPM_ACCESS_REG) */
+enum tpm_access_bits {
+ tpm_reg_valid_sts = (1 << 7),
+ active_locality = (1 << 5),
+ request_use = (1 << 1),
+ tpm_establishment = (1 << 0),
+};
+
+/*
+ * Variuous fields of the TPM status register, arguably the most important
+ * register when interfacing to a TPM.
+ */
+enum tpm_sts_bits {
+ tpm_family_shift = 26,
+ tpm_family_mask = ((1 << 2) - 1), /* 2 bits wide. */
+ tpm_family_tpm2 = 1,
+ reset_establishment_bit = (1 << 25),
+ command_cancel = (1 << 24),
+ burst_count_shift = 8,
+ burst_count_mask = ((1 << 16) - 1), /* 16 bits wide. */
+ sts_valid = (1 << 7),
+ command_ready = (1 << 6),
+ tpm_go = (1 << 5),
+ data_avail = (1 << 4),
+ expect = (1 << 3),
+ self_test_done = (1 << 2),
+ response_retry = (1 << 1),
+};
+
+/*
+ * SPI frame header for TPM transactions is 4 bytes in size, it is described
+ * in section "6.4.6 Spi Bit Protocol".
+ */
+typedef struct {
+ unsigned char body[4];
+} spi_frame_header;
+
+void tpm2_get_info(struct tpm2_info *info)
+{
+ *info = tpm_info;
+}
+
+/*
+ * Each TPM2 SPI transaction starts the same: CS is asserted, the 4 byte
+ * header is sent to the TPM, the master waits til TPM is ready to continue.
+ */
+static void start_transaction(int read_write, size_t bytes, unsigned addr)
+{
+ spi_frame_header header;
+ uint8_t byte;
+ int i;
+
+ /*
+ * Give it 10 ms. TODO(vbendeb): remove this once cr50 SPS TPM driver
+ * performance is fixed.
+ */
+ mdelay(10);
+
+ /*
+ * The first byte of the frame header encodes the transaction type
+ * (read or write) and transfer size (set to lentgh - 1), limited to
+ * 64 bytes.
+ */
+ header.body[0] = (read_write ? 0x80 : 0) | 0x40 | (bytes - 1);
+
+ /* The rest of the frame header is the TPM register address. */
+ for (i = 0; i < 3; i++)
+ header.body[i + 1] = (addr >> (8 * (2 - i))) & 0xff;
+
+ /* CS assert wakes up the slave. */
+ tpm_if.cs_assert(tpm_if.slave);
+
+ /*
+ * The TCG TPM over SPI specification introduces the notion of SPI
+ * flow control (Section "6.4.5 Flow Control").
+ *
+ * Again, the slave (TPM device) expects each transaction to start
+ * with a 4 byte header trasmitted by master. The header indicates if
+ * the master needs to read or write a register, and the register
+ * address.
+ *
+ * If the slave needs to stall the transaction (for instance it is not
+ * ready to send the register value to the master), it sets the MOSI
+ * line to 0 during the last clock of the 4 byte header. In this case
+ * the master is supposed to start polling the SPI bus, one byte at
+ * time, until the last bit in the received byte (transferred during
+ * the last clock of the byte) is set to 1.
+ *
+ * Due to some SPI controllers' shortcomings (Rockchip comes to
+ * mind...) we trasmit the 4 byte header without checking the byte
+ * transmitted by the TPM during the transaction's last byte.
+ *
+ * We know that cr50 is guaranteed to set the flow control bit to 0
+ * during the header transfer, but real TPM2 might be fast enough not
+ * to require to stall the master, this would present an issue.
+ * crosbug.com/p/52132 has been opened to track this.
+ */
+ tpm_if.xfer(tpm_if.slave, header.body, sizeof(header.body), NULL, 0);
+
+ /* Now poll the bus until TPM removes the stall bit. */
+ do {
+ tpm_if.xfer(tpm_if.slave, NULL, 0, &byte, 1);
+ } while (!(byte & 1));
+}
+
+/*
+ * Print out the contents of a buffer, if debug is enabled. Skip registers
+ * other than FIFO, unless debug_level_ is 2.
+ */
+static void trace_dump(const char *prefix, uint32_t reg,
+ size_t bytes, const uint8_t *buffer,
+ int force)
+{
+ static char prev_prefix;
+ static unsigned prev_reg;
+ static int current_char;
+ const int BYTES_PER_LINE = 32;
+
+ if (!force) {
+ if (!debug_level_)
+ return;
+
+ if ((debug_level_ < 2) && (reg != TPM_DATA_FIFO_REG))
+ return;
+ }
+
+ /*
+ * Do not print register address again if the last dump print was for
+ * that register.
+ */
+ if ((prev_prefix != *prefix) || (prev_reg != reg)) {
+ prev_prefix = *prefix;
+ prev_reg = reg;
+ printk(BIOS_DEBUG, "\n%s %2.2x:", prefix, reg);
+ current_char = 0;
+ }
+
+ if ((reg != TPM_DATA_FIFO_REG) && (bytes == 4)) {
+ /*
+ * This must be a regular register address, print the 32 bit
+ * value.
+ */
+ printk(BIOS_DEBUG, " %8.8x", *(const uint32_t *)buffer);
+ } else {
+ int i;
+
+ /*
+ * Data read from or written to FIFO or not in 4 byte
+ * quantiites is printed byte at a time.
+ */
+ for (i = 0; i < bytes; i++) {
+ if (current_char && !(current_char % BYTES_PER_LINE)) {
+ printk(BIOS_DEBUG, "\n ");
+ current_char = 0;
+ }
+ current_char++;
+ printk(BIOS_DEBUG, " %2.2x", buffer[i]);
+ }
+ }
+}
+
+/*
+ * Once transaction is initiated and the TPM indicated that it is ready to go,
+ * write the actual bytes to the register.
+ */
+static void write_bytes(const void *buffer, size_t bytes)
+{
+ tpm_if.xfer(tpm_if.slave, buffer, bytes, NULL, 0);
+}
+
+/*
+ * Once transaction is initiated and the TPM indicated that it is ready to go,
+ * read the actual bytes from the register.
+ */
+static void read_bytes(void *buffer, size_t bytes)
+{
+ tpm_if.xfer(tpm_if.slave, NULL, 0, buffer, bytes);
+}
+
+/*
+ * To write a register, start transaction, transfer data to the TPM, deassert
+ * CS when done.
+ *
+ * Returns one to indicate success, zero (not yet implemented) to indicate
+ * failure.
+ */
+static int tpm2_write_reg(unsigned reg_number, const void *buffer, size_t bytes)
+{
+ trace_dump("W", reg_number, bytes, buffer, 0);
+ start_transaction(false, bytes, reg_number);
+ write_bytes(buffer, bytes);
+ tpm_if.cs_deassert(tpm_if.slave);
+ return 1;
+}
+
+/*
+ * To read a register, start transaction, transfer data from the TPM, deassert
+ * CS when done.
+ *
+ * Returns one to indicate success, zero (not yet implemented) to indicate
+ * failure.
+ */
+static int tpm2_read_reg(unsigned reg_number, void *buffer, size_t bytes)
+{
+ start_transaction(true, bytes, reg_number);
+ read_bytes(buffer, bytes);
+ tpm_if.cs_deassert(tpm_if.slave);
+ trace_dump("R", reg_number, bytes, buffer, 0);
+ return 1;
+}
+
+/*
+ * Status register is accessed often, wrap reading and writing it into
+ * dedicated functions.
+ */
+static int read_tpm_sts(uint32_t *status)
+{
+ return tpm2_read_reg(TPM_STS_REG, status, sizeof(*status));
+}
+
+static int write_tpm_sts(uint32_t status)
+{
+ return tpm2_write_reg(TPM_STS_REG, &status, sizeof(status));
+}
+
+/*
+ * The TPM may limit the transaction bytes count (burst count) below the 64
+ * bytes max. The current value is available as a field of the status
+ * register.
+ */
+static uint32_t get_burst_count(void)
+{
+ uint32_t status;
+
+ read_tpm_sts(&status);
+ return (status >> burst_count_shift) & burst_count_mask;
+}
+
+int tpm2_init(struct spi_slave *spi_if)
+{
+ uint32_t did_vid, status;
+ uint8_t cmd;
+
+ tpm_if.slave = spi_if;
+
+ tpm2_read_reg(TPM_DID_VID_REG, &did_vid, sizeof(did_vid));
+
+ /* Try claiming locality zero. */
+ tpm2_read_reg(TPM_ACCESS_REG, &cmd, sizeof(cmd));
+ if ((cmd & (active_locality & tpm_reg_valid_sts)) ==
+ (active_locality & tpm_reg_valid_sts)) {
+ /*
+ * Locality active - maybe reset line is not connected?
+ * Release the locality and try again
+ */
+ cmd = active_locality;
+ tpm2_write_reg(TPM_ACCESS_REG, &cmd, sizeof(cmd));
+ tpm2_read_reg(TPM_ACCESS_REG, &cmd, sizeof(cmd));
+ }
+
+ /* The tpm_establishment bit can be either set or not, ignore it. */
+ if ((cmd & ~tpm_establishment) != tpm_reg_valid_sts) {
+ printk(BIOS_ERR, "invalid reset status: %#x\n", cmd);
+ return -1;
+ }
+
+ cmd = request_use;
+ tpm2_write_reg(TPM_ACCESS_REG, &cmd, sizeof(cmd));
+ tpm2_read_reg(TPM_ACCESS_REG, &cmd, sizeof(cmd));
+ if ((cmd & ~tpm_establishment) !=
+ (tpm_reg_valid_sts | active_locality)) {
+ printk(BIOS_ERR, "failed to claim locality 0, status: %#x\n",
+ cmd);
+ return -1;
+ }
+
+ read_tpm_sts(&status);
+ if (((status >> tpm_family_shift) & tpm_family_mask) !=
+ tpm_family_tpm2) {
+ printk(BIOS_ERR, "unexpected TPM family value, status: %#x\n",
+ status);
+ return -1;
+ }
+
+ /*
+ * Locality claimed, read the revision value and set up the tpm_info
+ * structure.
+ */
+ tpm2_read_reg(TPM_RID_REG, &cmd, sizeof(cmd));
+ tpm_info.vendor_id = did_vid & 0xffff;
+ tpm_info.device_id = did_vid >> 16;
+ tpm_info.revision = cmd;
+
+ printk(BIOS_INFO, "Connected to device vid:did:rid of %4.4x:%4.4x:%2.2x\n",
+ tpm_info.vendor_id, tpm_info.device_id, tpm_info.revision);
+
+ return 0;
+}
+
+/*
+ * This is in seconds, certain TPM commands, like key generation, can take
+ * long time to complete.
+ *
+ * Returns one to indicate success, zero (not yet implemented) to indicate
+ * failure.
+ */
+#define MAX_STATUS_TIMEOUT 120
+static int wait_for_status(uint32_t status_mask, uint32_t status_expected)
+{
+ uint32_t status;
+ struct stopwatch sw;
+
+ stopwatch_init_usecs_expire(&sw, MAX_STATUS_TIMEOUT * 1000 * 1000);
+ do {
+ udelay(1000);
+ if (stopwatch_expired(&sw)) {
+ printk(BIOS_ERR, "failed to get expected status %x\n",
+ status_expected);
+ return false;
+ }
+ read_tpm_sts(&status);
+ } while ((status & status_mask) != status_expected);
+
+ return 1;
+}
+
+enum fifo_transfer_direction {
+ fifo_transmit = 0,
+ fifo_receive = 1
+};
+
+/* Union allows to avoid casting away 'const' on transmit buffers. */
+union fifo_transfer_buffer {
+ uint8_t *rx_buffer;
+ const uint8_t *tx_buffer;
+};
+
+/*
+ * Transfer requested number of bytes to or from TPM FIFO, accounting for the
+ * current burst count value.
+ */
+static void fifo_transfer(size_t transfer_size,
+ union fifo_transfer_buffer buffer,
+ enum fifo_transfer_direction direction)
+{
+ size_t transaction_size;
+ size_t burst_count;
+ size_t handled_so_far = 0;
+
+ do {
+ do {
+ /* Could be zero when TPM is busy. */
+ burst_count = get_burst_count();
+ } while (!burst_count);
+
+ transaction_size = transfer_size - handled_so_far;
+ transaction_size = MIN(transaction_size, burst_count);
+
+ /*
+ * The SPI frame header does not allow to pass more than 64
+ * bytes.
+ */
+ transaction_size = MIN(transaction_size, 64);
+
+ if (direction == fifo_receive)
+ tpm2_read_reg(TPM_DATA_FIFO_REG,
+ buffer.rx_buffer + handled_so_far,
+ transaction_size);
+ else
+ tpm2_write_reg(TPM_DATA_FIFO_REG,
+ buffer.tx_buffer + handled_so_far,
+ transaction_size);
+
+ handled_so_far += transaction_size;
+
+ } while (handled_so_far != transfer_size);
+}
+
+size_t tpm2_process_command(const void *tpm2_command, size_t command_size,
+ void *tpm2_response, size_t max_response)
+{
+ uint32_t status;
+ uint32_t expected_status_bits;
+ size_t payload_size;
+ size_t bytes_to_go;
+ const uint8_t *cmd_body = tpm2_command;
+ uint8_t *rsp_body = tpm2_response;
+ union fifo_transfer_buffer fifo_buffer;
+ const int HEADER_SIZE = 6;
+
+ /* Skip the two byte tag, read the size field. */
+ payload_size = read_be32(cmd_body + 2);
+
+ /* Sanity check. */
+ if (payload_size != command_size) {
+ printk(BIOS_ERR,
+ "Command size mismatch: encoded %zd != requested %zd\n",
+ payload_size, command_size);
+ trace_dump("W", TPM_DATA_FIFO_REG, command_size, cmd_body, 1);
+ printk(BIOS_DEBUG, "\n");
+ return 0;
+ }
+
+ /* Let the TPM know that the command is coming. */
+ write_tpm_sts(command_ready);
+
+ /*
+ * Tpm commands and responses written to and read from the FIFO
+ * register (0x24) are datagrams of variable size, prepended by a 6
+ * byte header.
+ *
+ * The specification description of the state machine is a bit vague,
+ * but from experience it looks like there is no need to wait for the
+ * sts.expect bit to be set, at least with the 9670 and cr50 devices.
+ * Just write the command into FIFO, making sure not to exceed the
+ * burst count or the maximum PDU size, whatever is smaller.
+ */
+ fifo_buffer.tx_buffer = cmd_body;
+ fifo_transfer(command_size, fifo_buffer, fifo_transmit);
+
+ /* Now tell the TPM it can start processing the command. */
+ write_tpm_sts(tpm_go);
+
+ /* Now wait for it to report that the response is ready. */
+ expected_status_bits = sts_valid | data_avail;
+ if (!wait_for_status(expected_status_bits, expected_status_bits)) {
+ /*
+ * If timed out, which should never happen, let's at least
+ * print out the offending command.
+ */
+ trace_dump("W", TPM_DATA_FIFO_REG, command_size, cmd_body, 1);
+ printk(BIOS_DEBUG, "\n");
+ return 0;
+ }
+
+ /*
+ * The response is ready, let's read it. First we read the FIFO
+ * payload header, to see how much data to expect. The response header
+ * size is fixed to six bytes, the total payload size is stored in
+ * network order in the last four bytes.
+ */
+ tpm2_read_reg(TPM_DATA_FIFO_REG, rsp_body, HEADER_SIZE);
+
+ /* Find out the total payload size, skipping the two byte tag. */
+ payload_size = read_be32(rsp_body + 2);
+
+ if (payload_size > max_response) {
+ /*
+ * TODO(vbendeb): at least drain the FIFO here or somehow let
+ * the TPM know that the response can be dropped.
+ */
+ printk(BIOS_ERR, " tpm response too long (%zd bytes)",
+ payload_size);
+ return 0;
+ }
+
+ /*
+ * Now let's read all but the last byte in the FIFO to make sure the
+ * status register is showing correct flow control bits: 'more data'
+ * until the last byte and then 'no more data' once the last byte is
+ * read.
+ */
+ bytes_to_go = payload_size - 1 - HEADER_SIZE;
+ fifo_buffer.rx_buffer = rsp_body + HEADER_SIZE;
+ fifo_transfer(bytes_to_go, fifo_buffer, fifo_receive);
+
+ /* Verify that there is still data to read. */
+ read_tpm_sts(&status);
+ if ((status & expected_status_bits) != expected_status_bits) {
+ printk(BIOS_ERR, "unexpected intermediate status %#x\n",
+ status);
+ return 0;
+ }
+
+ /* Read the last byte of the PDU. */
+ tpm2_read_reg(TPM_DATA_FIFO_REG, rsp_body + payload_size - 1, 1);
+
+ /* Terminate the dump, if enabled. */
+ if (debug_level_)
+ printk(BIOS_DEBUG, "\n");
+
+ /* Verify that 'data available' is not asseretd any more. */
+ read_tpm_sts(&status);
+ if ((status & expected_status_bits) != sts_valid) {
+ printk(BIOS_ERR, "unexpected final status %#x\n", status);
+ return 0;
+ }
+
+ /* Move the TPM back to idle state. */
+ write_tpm_sts(command_ready);
+
+ return payload_size;
+}
diff --git a/src/drivers/spi/tpm/tpm.h b/src/drivers/spi/tpm/tpm.h
new file mode 100644
index 0000000000..214d3bd2df
--- /dev/null
+++ b/src/drivers/spi/tpm/tpm.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2016 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ */
+
+#ifndef __COREBOOT_SRC_DRIVERS_SPI_TPM_TPM_H
+#define __COREBOOT_SRC_DRIVERS_SPI_TPM_TPM_H
+
+#include <stddef.h>
+#include <spi-generic.h>
+
+/*
+ * A tpm device descriptor, values read from the appropriate device regisrers
+ * are cached here.
+ */
+struct tpm2_info {
+ uint16_t vendor_id;
+ uint16_t device_id;
+ uint16_t revision;
+};
+
+/*
+ * Initialize a TPM2 device: read its id, claim locality of zero, verify that
+ * this indeed is a TPM2 device. Use the passed in handle to access the right
+ * SPI port.
+ *
+ * Return 0 on success, non-zero on failure.
+ */
+int tpm2_init(struct spi_slave *spi_if);
+
+
+/*
+ * Each command processing consists of sending the command to the TPM, by
+ * writing it into the FIFO register, then polling the status register until
+ * the TPM is ready to respond, then reading the response from the FIFO
+ * regitster. The size of the response can be gleaned from the 6 byte header.
+ *
+ * This function places the response into the tpm2_response buffer and returns
+ * the size of the response.
+ */
+size_t tpm2_process_command(const void *tpm2_command, size_t command_size,
+ void *tpm2_response, size_t max_response);
+
+/* Get information about previously initialized TPM device. */
+void tpm2_get_info(struct tpm2_info *info);
+
+#endif /* ! __COREBOOT_SRC_DRIVERS_SPI_TPM_TPM_H */