diff options
Diffstat (limited to 'src/drivers/pc80/tpm/tis.c')
| -rw-r--r-- | src/drivers/pc80/tpm/tis.c | 992 |
1 files changed, 992 insertions, 0 deletions
diff --git a/src/drivers/pc80/tpm/tis.c b/src/drivers/pc80/tpm/tis.c new file mode 100644 index 0000000000..9802654ee1 --- /dev/null +++ b/src/drivers/pc80/tpm/tis.c @@ -0,0 +1,992 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * The code in this file has been heavily based on the article "Writing a TPM + * Device Driver" published on http://ptgmedia.pearsoncmg.com and the + * submission by Stefan Berger on Qemu-devel mailing list. + * + * One principal difference is that in the simplest config the other than 0 + * TPM localities do not get mapped by some devices (for instance, by + * Infineon slb9635), so this driver provides access to locality 0 only. + */ + +#include <stdlib.h> +#include <string.h> +#include <delay.h> +#include <arch/io.h> +#include <arch/acpi.h> +#include <arch/acpigen.h> +#include <arch/acpi_device.h> +#include <device/device.h> +#include <console/console.h> +#include <security/tpm/tis.h> +#include <arch/early_variables.h> +#include <device/pnp.h> +#include "chip.h" + +#define PREFIX "lpc_tpm: " +/* TCG Physical Presence Interface */ +#define TPM_PPI_UUID "3dddfaa6-361b-4eb4-a424-8d10089d1653" +/* TCG Memory Clear Interface */ +#define TPM_MCI_UUID "376054ed-cc13-4675-901c-4756d7f2d45d" +/* coreboot wrapper for TPM driver (start) */ +#define TPM_DEBUG(fmt, args...) \ + if (IS_ENABLED(CONFIG_DEBUG_TPM)) { \ + printk(BIOS_DEBUG, PREFIX); \ + printk(BIOS_DEBUG, fmt , ##args); \ + } +#define TPM_DEBUG_IO_READ(reg_, val_) \ + TPM_DEBUG("Read reg 0x%x returns 0x%x\n", (reg_), (val_)) +#define TPM_DEBUG_IO_WRITE(reg_, val_) \ + TPM_DEBUG("Write reg 0x%x with 0x%x\n", (reg_), (val_)) +#define printf(x...) printk(BIOS_ERR, x) + +/* coreboot wrapper for TPM driver (end) */ + +/* the macro accepts the locality value, but only locality 0 is operational */ +#define TIS_REG(LOCALITY, REG) \ + (void *)(CONFIG_TPM_TIS_BASE_ADDRESS + (LOCALITY << 12) + REG) + +/* hardware registers' offsets */ +#define TIS_REG_ACCESS 0x0 +#define TIS_REG_INT_ENABLE 0x8 +#define TIS_REG_INT_VECTOR 0xc +#define TIS_REG_INT_STATUS 0x10 +#define TIS_REG_INTF_CAPABILITY 0x14 +#define TIS_REG_STS 0x18 +#define TIS_REG_BURST_COUNT 0x19 +#define TIS_REG_DATA_FIFO 0x24 +#define TIS_REG_DID_VID 0xf00 +#define TIS_REG_RID 0xf04 + +/* Some registers' bit field definitions */ +#define TIS_STS_VALID (1 << 7) /* 0x80 */ +#define TIS_STS_COMMAND_READY (1 << 6) /* 0x40 */ +#define TIS_STS_TPM_GO (1 << 5) /* 0x20 */ +#define TIS_STS_DATA_AVAILABLE (1 << 4) /* 0x10 */ +#define TIS_STS_EXPECT (1 << 3) /* 0x08 */ +#define TIS_STS_RESPONSE_RETRY (1 << 1) /* 0x02 */ + +#define TIS_ACCESS_TPM_REG_VALID_STS (1 << 7) /* 0x80 */ +#define TIS_ACCESS_ACTIVE_LOCALITY (1 << 5) /* 0x20 */ +#define TIS_ACCESS_BEEN_SEIZED (1 << 4) /* 0x10 */ +#define TIS_ACCESS_SEIZE (1 << 3) /* 0x08 */ +#define TIS_ACCESS_PENDING_REQUEST (1 << 2) /* 0x04 */ +#define TIS_ACCESS_REQUEST_USE (1 << 1) /* 0x02 */ +#define TIS_ACCESS_TPM_ESTABLISHMENT (1 << 0) /* 0x01 */ + +/* + * Error value returned if a tpm register does not enter the expected state + * after continuous polling. No actual TPM register reading ever returns ~0, + * so this value is a safe error indication to be mixed with possible status + * register values. + */ +#define TPM_TIMEOUT_ERR (~0) + +/* Error value returned on various TPM driver errors */ +#define TPM_DRIVER_ERR (~0) + + /* 1 second is plenty for anything TPM does.*/ +#define MAX_DELAY_US (1000 * 1000) + +/* + * Structures defined below allow creating descriptions of TPM vendor/device + * ID information for run time discovery. The only device the system knows + * about at this time is Infineon slb9635 + */ +struct device_name { + u16 dev_id; + const char * const dev_name; +}; + +struct vendor_name { + u16 vendor_id; + const char * vendor_name; + const struct device_name* dev_names; +}; + +static const struct device_name atmel_devices[] = { + {0x3204, "AT97SC3204"}, + {0xffff} +}; + +static const struct device_name infineon_devices[] = { + {0x000b, "SLB9635 TT 1.2"}, + {0x001a, "SLB9660 TT 1.2"}, +#if IS_ENABLED(CONFIG_TPM2) + {0x001b, "SLB9670 TT 2.0"}, +#else + {0x001b, "SLB9670 TT 1.2"}, +#endif + {0xffff} +}; + +static const struct device_name nuvoton_devices[] = { + {0x00fe, "NPCT420AA V2"}, + {0xffff} +}; + +static const struct device_name stmicro_devices[] = { + {0x0000, "ST33ZP24" }, + {0xffff} +}; + +static const struct vendor_name vendor_names[] = { + {0x1114, "Atmel", atmel_devices}, + {0x15d1, "Infineon", infineon_devices}, + {0x1050, "Nuvoton", nuvoton_devices}, + {0x104a, "ST Microelectronics", stmicro_devices}, +}; + +/* + * Cached vendor/device ID pair to indicate that the device has been already + * discovered + */ +static u32 vendor_dev_id CAR_GLOBAL; + +static inline u8 tpm_read_status(int locality) +{ + u8 value = read8(TIS_REG(locality, TIS_REG_STS)); + TPM_DEBUG_IO_READ(TIS_REG_STS, value); + return value; +} + +static inline void tpm_write_status(u8 sts, int locality) +{ + TPM_DEBUG_IO_WRITE(TIS_REG_STS, sts); + write8(TIS_REG(locality, TIS_REG_STS), sts); +} + +static inline u8 tpm_read_data(int locality) +{ + u8 value = read8(TIS_REG(locality, TIS_REG_DATA_FIFO)); + TPM_DEBUG_IO_READ(TIS_REG_DATA_FIFO, value); + return value; +} + +static inline void tpm_write_data(u8 data, int locality) +{ + TPM_DEBUG_IO_WRITE(TIS_REG_STS, data); + write8(TIS_REG(locality, TIS_REG_DATA_FIFO), data); +} + +static inline u16 tpm_read_burst_count(int locality) +{ + u16 count; + count = read8(TIS_REG(locality, TIS_REG_BURST_COUNT)); + count |= read8(TIS_REG(locality, TIS_REG_BURST_COUNT + 1)) << 8; + TPM_DEBUG_IO_READ(TIS_REG_BURST_COUNT, count); + return count; +} + +static inline u8 tpm_read_access(int locality) +{ + u8 value = read8(TIS_REG(locality, TIS_REG_ACCESS)); + TPM_DEBUG_IO_READ(TIS_REG_ACCESS, value); + return value; +} + +static inline void tpm_write_access(u8 data, int locality) +{ + TPM_DEBUG_IO_WRITE(TIS_REG_ACCESS, data); + write8(TIS_REG(locality, TIS_REG_ACCESS), data); +} + +static inline u32 tpm_read_did_vid(int locality) +{ + u32 value = read32(TIS_REG(locality, TIS_REG_DID_VID)); + TPM_DEBUG_IO_READ(TIS_REG_DID_VID, value); + return value; +} + +static inline void tpm_write_int_vector(int vector, int locality) +{ + TPM_DEBUG_IO_WRITE(TIS_REG_INT_VECTOR, vector); + write8(TIS_REG(locality, TIS_REG_INT_VECTOR), vector & 0xf); +} + +static inline u8 tpm_read_int_vector(int locality) +{ + u8 value = read8(TIS_REG(locality, TIS_REG_INT_VECTOR)); + TPM_DEBUG_IO_READ(TIS_REG_INT_VECTOR, value); + return value; +} + +static inline void tpm_write_int_polarity(int polarity, int locality) +{ + /* Set polarity and leave all other bits at 0 */ + u32 value = (polarity & 0x3) << 3; + TPM_DEBUG_IO_WRITE(TIS_REG_INT_ENABLE, value); + write32(TIS_REG(locality, TIS_REG_INT_ENABLE), value); +} + +static inline u32 tpm_read_int_polarity(int locality) +{ + /* Get polarity and leave all other bits */ + u32 value = read8(TIS_REG(locality, TIS_REG_INT_ENABLE)); + value = (value >> 3) & 0x3; + TPM_DEBUG_IO_READ(TIS_REG_INT_ENABLE, value); + return value; +} + +/* + * tis_wait_sts() + * + * Wait for at least a second for a status to change its state to match the + * expected state. Normally the transition happens within microseconds. + * + * @locality - locality + * @mask - bitmask for the bitfield(s) to watch + * @expected - value the field(s) are supposed to be set to + * + * Returns 0 on success or TPM_TIMEOUT_ERR on timeout. + */ +static int tis_wait_sts(int locality, u8 mask, u8 expected) +{ + u32 time_us = MAX_DELAY_US; + while (time_us > 0) { + u8 value = tpm_read_status(locality); + if ((value & mask) == expected) + return 0; + udelay(1); /* 1 us */ + time_us--; + } + return TPM_TIMEOUT_ERR; +} + +static inline int tis_wait_ready(int locality) +{ + return tis_wait_sts(locality, TIS_STS_COMMAND_READY, + TIS_STS_COMMAND_READY); +} + +static inline int tis_wait_valid(int locality) +{ + return tis_wait_sts(locality, TIS_STS_VALID, TIS_STS_VALID); +} + +static inline int tis_wait_valid_data(int locality) +{ + const u8 has_data = TIS_STS_DATA_AVAILABLE | TIS_STS_VALID; + return tis_wait_sts(locality, has_data, has_data); +} + +static inline int tis_has_valid_data(int locality) +{ + const u8 has_data = TIS_STS_DATA_AVAILABLE | TIS_STS_VALID; + return (tpm_read_status(locality) & has_data) == has_data; +} + +static inline int tis_expect_data(int locality) +{ + return !!(tpm_read_status(locality) & TIS_STS_EXPECT); +} + +/* + * tis_wait_access() + * + * Wait for at least a second for a access to change its state to match the + * expected state. Normally the transition happens within microseconds. + * + * @locality - locality + * @mask - bitmask for the bitfield(s) to watch + * @expected - value the field(s) are supposed to be set to + * + * Returns 0 on success or TPM_TIMEOUT_ERR on timeout. + */ +static int tis_wait_access(int locality, u8 mask, u8 expected) +{ + u32 time_us = MAX_DELAY_US; + while (time_us > 0) { + u8 value = tpm_read_access(locality); + if ((value & mask) == expected) + return 0; + udelay(1); /* 1 us */ + time_us--; + } + return TPM_TIMEOUT_ERR; +} + +static inline int tis_wait_dropped_access(int locality) +{ + return tis_wait_access(locality, TIS_ACCESS_ACTIVE_LOCALITY, 0); +} + +static inline int tis_wait_received_access(int locality) +{ + return tis_wait_access(locality, TIS_ACCESS_ACTIVE_LOCALITY, + TIS_ACCESS_ACTIVE_LOCALITY); +} + +static inline int tis_has_access(int locality) +{ + return !!(tpm_read_access(locality) & TIS_ACCESS_ACTIVE_LOCALITY); +} + +static inline void tis_request_access(int locality) +{ + tpm_write_access(TIS_ACCESS_REQUEST_USE, locality); +} + +static inline void tis_drop_access(int locality) +{ + tpm_write_access(TIS_ACCESS_ACTIVE_LOCALITY, locality); +} + +/* + * PC Client Specific TPM Interface Specification section 11.2.12: + * + * Software must be prepared to send two writes of a "1" to command ready + * field: the first to indicate successful read of all the data, thus + * clearing the data from the ReadFIFO and freeing the TPM's resources, + * and the second to indicate to the TPM it is about to send a new command. + * + * In practice not all TPMs behave the same so it is necessary to be + * flexible when trying to set command ready. + * + * Returns 0 on success if the TPM is ready for transactions. + * Returns TPM_TIMEOUT_ERR if the command ready bit does not get set. + */ +static int tis_command_ready(u8 locality) +{ + u32 status; + + /* 1st attempt to set command ready */ + tpm_write_status(TIS_STS_COMMAND_READY, locality); + + /* Wait for response */ + status = tpm_read_status(locality); + + /* Check if command ready is set yet */ + if (status & TIS_STS_COMMAND_READY) + return 0; + + /* 2nd attempt to set command ready */ + tpm_write_status(TIS_STS_COMMAND_READY, locality); + + return tis_wait_ready(locality); +} + +/* + * Probe the TPM device and try determining its manufacturer/device name. + * + * Returns 0 on success (the device is found or was found during an earlier + * invocation) or TPM_DRIVER_ERR if the device is not found. + */ +static u32 tis_probe(void) +{ + const char *device_name = "unknown"; + const char *vendor_name = device_name; + const struct device_name *dev; + u32 didvid; + u16 vid, did; + int i; + + if (car_get_var(vendor_dev_id)) + return 0; /* Already probed. */ + + didvid = tpm_read_did_vid(0); + if (!didvid || (didvid == 0xffffffff)) { + printf("%s: No TPM device found\n", __FUNCTION__); + return TPM_DRIVER_ERR; + } + + car_set_var(vendor_dev_id, didvid); + + vid = didvid & 0xffff; + did = (didvid >> 16) & 0xffff; + for (i = 0; i < ARRAY_SIZE(vendor_names); i++) { + int j = 0; + u16 known_did; + if (vid == vendor_names[i].vendor_id) { + vendor_name = vendor_names[i].vendor_name; + } else { + continue; + } + dev = &vendor_names[i].dev_names[j]; + while ((known_did = dev->dev_id) != 0xffff) { + if (known_did == did) { + device_name = dev->dev_name; + break; + } + j++; + dev = &vendor_names[i].dev_names[j]; + } + break; + } + /* this will have to be converted into debug printout */ + printk(BIOS_INFO, "Found TPM %s by %s\n", device_name, vendor_name); + return 0; +} + +/* + * tis_senddata() + * + * send the passed in data to the TPM device. + * + * @data - address of the data to send, byte by byte + * @len - length of the data to send + * + * Returns 0 on success, TPM_DRIVER_ERR on error (in case the device does + * not accept the entire command). + */ +static u32 tis_senddata(const u8 * const data, u32 len) +{ + u32 offset = 0; + u16 burst = 0; + u32 max_cycles = 0; + u8 locality = 0; + + if (tis_wait_ready(locality)) { + printf("%s:%d - failed to get 'command_ready' status\n", + __FILE__, __LINE__); + return TPM_DRIVER_ERR; + } + burst = tpm_read_burst_count(locality); + + while (1) { + unsigned count; + + /* Wait till the device is ready to accept more data. */ + while (!burst) { + if (max_cycles++ == MAX_DELAY_US) { + printf("%s:%d failed to feed %d bytes of %d\n", + __FILE__, __LINE__, len - offset, len); + return TPM_DRIVER_ERR; + } + udelay(1); + burst = tpm_read_burst_count(locality); + } + + max_cycles = 0; + + /* + * Calculate number of bytes the TPM is ready to accept in one + * shot. + * + * We want to send the last byte outside of the loop (hence + * the -1 below) to make sure that the 'expected' status bit + * changes to zero exactly after the last byte is fed into the + * FIFO. + */ + count = min(burst, len - offset - 1); + while (count--) + tpm_write_data(data[offset++], locality); + + if (tis_wait_valid(locality) || !tis_expect_data(locality)) { + printf("%s:%d TPM command feed overflow\n", + __FILE__, __LINE__); + return TPM_DRIVER_ERR; + } + + burst = tpm_read_burst_count(locality); + if ((offset == (len - 1)) && burst) + /* + * We need to be able to send the last byte to the + * device, so burst size must be nonzero before we + * break out. + */ + break; + } + + /* Send the last byte. */ + tpm_write_data(data[offset++], locality); + + /* + * Verify that TPM does not expect any more data as part of this + * command. + */ + if (tis_wait_valid(locality) || tis_expect_data(locality)) { + printf("%s:%d unexpected TPM status 0x%x\n", + __FILE__, __LINE__, tpm_read_status(locality)); + return TPM_DRIVER_ERR; + } + + /* OK, sitting pretty, let's start the command execution. */ + tpm_write_status(TIS_STS_TPM_GO, locality); + + return 0; +} + +/* + * tis_readresponse() + * + * read the TPM device response after a command was issued. + * + * @buffer - address where to read the response, byte by byte. + * @len - pointer to the size of buffer + * + * On success stores the number of received bytes to len and returns 0. On + * errors (misformatted TPM data or synchronization problems) returns + * TPM_DRIVER_ERR. + */ +static u32 tis_readresponse(u8 *buffer, size_t *len) +{ + u16 burst_count; + u32 offset = 0; + u8 locality = 0; + u32 expected_count = *len; + int max_cycles = 0; + + /* Wait for the TPM to process the command */ + if (tis_wait_valid_data(locality)) { + printf("%s:%d failed processing command\n", __FILE__, __LINE__); + return TPM_DRIVER_ERR; + } + + do { + while ((burst_count = tpm_read_burst_count(locality)) == 0) { + if (max_cycles++ == MAX_DELAY_US) { + printf("%s:%d TPM stuck on read\n", + __FILE__, __LINE__); + return TPM_DRIVER_ERR; + } + udelay(1); + } + + max_cycles = 0; + + while (burst_count-- && (offset < expected_count)) { + buffer[offset++] = tpm_read_data(locality); + if (offset == 6) { + /* + * We got the first six bytes of the reply, + * let's figure out how many bytes to expect + * total - it is stored as a 4 byte number in + * network order, starting with offset 2 into + * the body of the reply. + */ + u32 real_length; + memcpy(&real_length, + buffer + 2, + sizeof(real_length)); + expected_count = be32_to_cpu(real_length); + + if ((expected_count < offset) || + (expected_count > *len)) { + printf("%s:%d bad response size %d\n", + __FILE__, __LINE__, + expected_count); + return TPM_DRIVER_ERR; + } + } + } + + /* Wait for the next portion */ + if (tis_wait_valid(locality)) { + printf("%s:%d failed to read response\n", + __FILE__, __LINE__); + return TPM_DRIVER_ERR; + } + + if (offset == expected_count) + break; /* We got all we need */ + + } while (tis_has_valid_data(locality)); + + /* * Make sure we indeed read all there was. */ + if (tis_has_valid_data(locality)) { + printf("%s:%d wrong receive status: %x %d bytes left\n", + __FILE__, __LINE__, tpm_read_status(locality), + tpm_read_burst_count(locality)); + return TPM_DRIVER_ERR; + } + + /* Tell the TPM that we are done. */ + if (tis_command_ready(locality) == TPM_TIMEOUT_ERR) + return TPM_DRIVER_ERR; + + *len = offset; + return 0; +} + +/* + * tis_init() + * + * Initialize the TPM device. Returns 0 on success or TPM_DRIVER_ERR on + * failure (in case device probing did not succeed). + */ +int tis_init(void) +{ + if (tis_probe()) + return TPM_DRIVER_ERR; + return 0; +} + +/* + * tis_open() + * + * Requests access to locality 0 for the caller. After all commands have been + * completed the caller is supposed to call tis_close(). + * + * Returns 0 on success, TPM_DRIVER_ERR on failure. + */ +int tis_open(void) +{ + u8 locality = 0; /* we use locality zero for everything */ + + if (tis_close()) + return TPM_DRIVER_ERR; + + /* now request access to locality */ + tis_request_access(locality); + + /* did we get a lock? */ + if (tis_wait_received_access(locality)) { + printf("%s:%d - failed to lock locality %d\n", + __FILE__, __LINE__, locality); + return TPM_DRIVER_ERR; + } + + /* Certain TPMs seem to need some delay here or they hang... */ + udelay(10); + + if (tis_command_ready(locality) == TPM_TIMEOUT_ERR) + return TPM_DRIVER_ERR; + + return 0; +} + +/* + * tis_close() + * + * terminate the current session with the TPM by releasing the locked + * locality. Returns 0 on success of TPM_DRIVER_ERR on failure (in case lock + * removal did not succeed). + */ +int tis_close(void) +{ + u8 locality = 0; + if (tis_has_access(locality)) { + tis_drop_access(locality); + if (tis_wait_dropped_access(locality)) { + printf("%s:%d - failed to release locality %d\n", + __FILE__, __LINE__, locality); + return TPM_DRIVER_ERR; + } + } + return 0; +} + +/* + * tis_sendrecv() + * + * Send the requested data to the TPM and then try to get its response + * + * @sendbuf - buffer of the data to send + * @send_size size of the data to send + * @recvbuf - memory to save the response to + * @recv_len - pointer to the size of the response buffer + * + * Returns 0 on success (and places the number of response bytes at recv_len) + * or TPM_DRIVER_ERR on failure. + */ +int tis_sendrecv(const uint8_t *sendbuf, size_t send_size, + uint8_t *recvbuf, size_t *recv_len) +{ + if (tis_senddata(sendbuf, send_size)) { + printf("%s:%d failed sending data to TPM\n", + __FILE__, __LINE__); + return TPM_DRIVER_ERR; + } + + return tis_readresponse(recvbuf, recv_len); +} + +#ifdef __RAMSTAGE__ + +/* + * tis_setup_interrupt() + * + * Set up the interrupt vector and polarity for locality 0 and + * disable all interrupts so they are unused in firmware but can + * be enabled by the OS. + * + * The values used here must match what is passed in the TPM ACPI + * device if ACPI is used on the platform. + * + * @vector - TPM interrupt vector + * @polarity - TPM interrupt polarity + * + * Returns 0 on success, TPM_DRIVER_ERR on failure. + */ +static int tis_setup_interrupt(int vector, int polarity) +{ + u8 locality = 0; + int has_access = tis_has_access(locality); + + /* Open connection and request access if not already granted */ + if (!has_access && tis_open() < 0) + return TPM_DRIVER_ERR; + + /* Set TPM interrupt vector */ + tpm_write_int_vector(vector, locality); + + /* Set TPM interupt polarity and disable interrupts */ + tpm_write_int_polarity(polarity, locality); + + /* Close connection if it was opened */ + if (!has_access && tis_close() < 0) + return TPM_DRIVER_ERR; + + return 0; +} + +static void lpc_tpm_read_resources(struct device *dev) +{ + /* Static 5K memory region specified in Kconfig */ + mmio_resource(dev, 0, CONFIG_TPM_TIS_BASE_ADDRESS >> 10, 0x5000 >> 10); +} + +static void lpc_tpm_set_resources(struct device *dev) +{ + tpm_config_t *config = (tpm_config_t *)dev->chip_info; + struct resource *res; + + for (res = dev->resource_list; res; res = res->next) { + if (!(res->flags & IORESOURCE_ASSIGNED)) + continue; + + if (res->flags & IORESOURCE_IRQ) { + /* Set interrupt vector */ + tis_setup_interrupt((int)res->base, + config->irq_polarity); + } else { + continue; + } + + res->flags |= IORESOURCE_STORED; + report_resource_stored(dev, res, " <tpm>"); + } +} + +#if IS_ENABLED(CONFIG_HAVE_ACPI_TABLES) + +static void tpm_ppi_func0_cb(void *arg) +{ + /* Functions 1-8. */ + u8 buf[] = {0xff, 0x01}; + acpigen_write_return_byte_buffer(buf, 2); +} + +static void tpm_ppi_func1_cb(void *arg) +{ + if (IS_ENABLED(CONFIG_TPM2)) + /* Interface version: 2.0 */ + acpigen_write_return_string("2.0"); + else + /* Interface version: 1.2 */ + acpigen_write_return_string("1.2"); +} + +static void tpm_ppi_func2_cb(void *arg) +{ + /* Submit operations: drop on the floor and return success. */ + acpigen_write_return_byte(0); +} + +static void tpm_ppi_func3_cb(void *arg) +{ + /* Pending operation: none. */ + acpigen_emit_byte(RETURN_OP); + acpigen_write_package(2); + acpigen_write_byte(0); + acpigen_write_byte(0); + acpigen_pop_len(); +} +static void tpm_ppi_func4_cb(void *arg) +{ + /* Pre-OS transition method: reboot. */ + acpigen_write_return_byte(2); +} +static void tpm_ppi_func5_cb(void *arg) +{ + /* Operation response: no operation executed. */ + acpigen_emit_byte(RETURN_OP); + acpigen_write_package(3); + acpigen_write_byte(0); + acpigen_write_byte(0); + acpigen_write_byte(0); + acpigen_pop_len(); +} +static void tpm_ppi_func6_cb(void *arg) +{ + /* + * Set preferred user language: deprecated and must return 3 aka + * "not implemented". + */ + acpigen_write_return_byte(3); +} +static void tpm_ppi_func7_cb(void *arg) +{ + /* Submit operations: deny. */ + acpigen_write_return_byte(3); +} +static void tpm_ppi_func8_cb(void *arg) +{ + /* All actions are forbidden. */ + acpigen_write_return_byte(1); +} +static void (*tpm_ppi_callbacks[])(void *) = { + tpm_ppi_func0_cb, + tpm_ppi_func1_cb, + tpm_ppi_func2_cb, + tpm_ppi_func3_cb, + tpm_ppi_func4_cb, + tpm_ppi_func5_cb, + tpm_ppi_func6_cb, + tpm_ppi_func7_cb, + tpm_ppi_func8_cb, +}; + +static void tpm_mci_func0_cb(void *arg) +{ + /* Function 1. */ + acpigen_write_return_singleton_buffer(0x3); +} +static void tpm_mci_func1_cb(void *arg) +{ + /* Just return success. */ + acpigen_write_return_byte(0); +} + +static void (*tpm_mci_callbacks[])(void *) = { + tpm_mci_func0_cb, + tpm_mci_func1_cb, +}; + +static void lpc_tpm_fill_ssdt(struct device *dev) +{ + const char *path = acpi_device_path(dev->bus->dev); + u32 arg; + + if (!path) { + path = "\\_SB_.PCI0.LPCB"; + printk(BIOS_DEBUG, "Using default TPM ACPI path: '%s'\n", path); + } + + /* Device */ + acpigen_write_scope(path); + acpigen_write_device(acpi_device_name(dev)); + + acpigen_write_name("_HID"); + acpigen_emit_eisaid("PNP0C31"); + + acpigen_write_name("_CID"); + acpigen_emit_eisaid("PNP0C31"); + + acpigen_write_name_integer("_UID", 1); + + u32 did_vid = tpm_read_did_vid(0); + if (did_vid > 0 && did_vid < 0xffffffff) + acpigen_write_STA(ACPI_STATUS_DEVICE_ALL_ON); + else + acpigen_write_STA(ACPI_STATUS_DEVICE_ALL_OFF); + + /* Resources */ + acpigen_write_name("_CRS"); + acpigen_write_resourcetemplate_header(); + acpigen_write_mem32fixed(1, CONFIG_TPM_TIS_BASE_ADDRESS, 0x5000); + acpigen_write_io16(0x2e, 0x2e, 1, 2, 1); + + if (CONFIG_TPM_PIRQ) { + /* + * PIRQ: Update interrupt vector with configured PIRQ + * Active-Low Level-Triggered Shared + */ + struct acpi_irq tpm_irq_a = ACPI_IRQ_LEVEL_LOW(CONFIG_TPM_PIRQ); + acpi_device_write_interrupt(&tpm_irq_a); + } else if (tpm_read_int_vector(0) > 0) { + u8 int_vec = tpm_read_int_vector(0); + u8 int_pol = tpm_read_int_polarity(0); + struct acpi_irq tpm_irq = ACPI_IRQ_LEVEL_LOW(int_vec); + + if (int_pol & 1) + tpm_irq.polarity = ACPI_IRQ_ACTIVE_LOW; + else + tpm_irq.polarity = ACPI_IRQ_ACTIVE_HIGH; + + if (int_pol & 2) + tpm_irq.mode = ACPI_IRQ_EDGE_TRIGGERED; + else + tpm_irq.mode = ACPI_IRQ_LEVEL_TRIGGERED; + + acpi_device_write_interrupt(&tpm_irq); + } + + acpigen_write_resourcetemplate_footer(); + + if (!IS_ENABLED(CONFIG_CHROMEOS)) { + /* + * _DSM method + */ + struct dsm_uuid ids[] = { + /* Physical presence interface. + * This is used to submit commands like "Clear TPM" to + * be run at next reboot provided that user confirms + * them. Spec allows user to cancel all commands and/or + * configure BIOS to reject commands. So we pretend that + * user did just this: cancelled everything. If user + * really wants to clear TPM the only option now is to + * do it manually in payload. + */ + DSM_UUID(TPM_PPI_UUID, &tpm_ppi_callbacks[0], + ARRAY_SIZE(tpm_ppi_callbacks), (void *) &arg), + /* Memory clearing on boot: just a dummy. */ + DSM_UUID(TPM_MCI_UUID, &tpm_mci_callbacks[0], + ARRAY_SIZE(tpm_mci_callbacks), (void *) &arg), + }; + + acpigen_write_dsm_uuid_arr(ids, ARRAY_SIZE(ids)); + } + acpigen_pop_len(); /* Device */ + acpigen_pop_len(); /* Scope */ + + printk(BIOS_INFO, "%s.%s: %s %s\n", path, acpi_device_name(dev), + dev->chip_ops->name, dev_path(dev)); +} + +static const char *lpc_tpm_acpi_name(const struct device *dev) +{ + return "TPM"; +} +#endif + +static struct device_operations lpc_tpm_ops = { + .read_resources = &lpc_tpm_read_resources, + .set_resources = &lpc_tpm_set_resources, +#if IS_ENABLED(CONFIG_HAVE_ACPI_TABLES) + .acpi_name = &lpc_tpm_acpi_name, + .acpi_fill_ssdt_generator = &lpc_tpm_fill_ssdt, +#endif +}; + +static struct pnp_info pnp_dev_info[] = { + { .flags = PNP_IRQ0 } +}; + +static void enable_dev(struct device *dev) +{ + pnp_enable_devices(dev, &lpc_tpm_ops, + ARRAY_SIZE(pnp_dev_info), pnp_dev_info); +} + +struct chip_operations drivers_pc80_tpm_ops = { + CHIP_NAME("LPC TPM") + .enable_dev = enable_dev +}; + +#endif /* __RAMSTAGE__ */ |