diff options
Diffstat (limited to 'src/drivers/pc80/pc')
| -rw-r--r-- | src/drivers/pc80/pc/Makefile.inc | 8 | ||||
| -rw-r--r-- | src/drivers/pc80/pc/i8254.c | 76 |
2 files changed, 83 insertions, 1 deletions
diff --git a/src/drivers/pc80/pc/Makefile.inc b/src/drivers/pc80/pc/Makefile.inc index 8c348e323e..bd56cd43a1 100644 --- a/src/drivers/pc80/pc/Makefile.inc +++ b/src/drivers/pc80/pc/Makefile.inc @@ -1,7 +1,6 @@ ifeq ($(CONFIG_ARCH_X86),y) ramstage-y += isa-dma.c -ramstage-y += i8254.c ramstage-y += i8259.c ramstage-$(CONFIG_UDELAY_IO) += udelay_io.c romstage-$(CONFIG_UDELAY_IO) += udelay_io.c @@ -9,4 +8,11 @@ ramstage-y += keyboard.c ramstage-$(CONFIG_SPKMODEM) += spkmodem.c romstage-$(CONFIG_SPKMODEM) += spkmodem.c +bootblock-y += i8254.c +verstage-y += i8254.c +romstage-y += i8254.c +ramstage-y += i8254.c +postcar-y += i8254.c +smm-y += i8254.c + endif diff --git a/src/drivers/pc80/pc/i8254.c b/src/drivers/pc80/pc/i8254.c index 53d880cc79..8e15d4ded1 100644 --- a/src/drivers/pc80/pc/i8254.c +++ b/src/drivers/pc80/pc/i8254.c @@ -12,6 +12,8 @@ */ #include <arch/io.h> +#include <commonlib/helpers.h> +#include <cpu/x86/tsc.h> #include <pc80/i8254.h> /* Initialize i8254 timers */ @@ -46,3 +48,77 @@ void udelay(int usecs) ; } #endif + +#define CLOCK_TICK_RATE 1193180U /* Underlying HZ */ + +/* ------ Calibrate the TSC ------- + * Too much 64-bit arithmetic here to do this cleanly in C, and for + * accuracy's sake we want to keep the overhead on the CTC speaker (channel 2) + * output busy loop as low as possible. We avoid reading the CTC registers + * directly because of the awkward 8-bit access mechanism of the 82C54 + * device. + */ + +#define CALIBRATE_INTERVAL ((2*CLOCK_TICK_RATE)/1000) /* 2ms */ +#define CALIBRATE_DIVISOR (2*1000) /* 2ms / 2000 == 1usec */ + +unsigned long calibrate_tsc_with_pit(void) +{ + /* Set the Gate high, disable speaker */ + outb((inb(0x61) & ~0x02) | 0x01, 0x61); + + /* + * Now let's take care of CTC channel 2 + * + * Set the Gate high, program CTC channel 2 for mode 0, + * (interrupt on terminal count mode), binary count, + * load 5 * LATCH count, (LSB and MSB) to begin countdown. + */ + outb(0xb0, 0x43); /* binary, mode 0, LSB/MSB, Ch 2 */ + + outb(CALIBRATE_INTERVAL & 0xff, 0x42); /* LSB of count */ + outb(CALIBRATE_INTERVAL >> 8, 0x42); /* MSB of count */ + + { + tsc_t start; + tsc_t end; + unsigned long count; + + start = rdtsc(); + count = 0; + do { + count++; + } while ((inb(0x61) & 0x20) == 0); + end = rdtsc(); + + /* Error: ECTCNEVERSET */ + if (count <= 1) + goto bad_ctc; + + /* 64-bit subtract - gcc just messes up with long longs */ + __asm__("subl %2,%0\n\t" + "sbbl %3,%1" + : "=a" (end.lo), "=d" (end.hi) + : "g" (start.lo), "g" (start.hi), + "0" (end.lo), "1" (end.hi)); + + /* Error: ECPUTOOFAST */ + if (end.hi) + goto bad_ctc; + + + /* Error: ECPUTOOSLOW */ + if (end.lo <= CALIBRATE_DIVISOR) + goto bad_ctc; + + return DIV_ROUND_UP(end.lo, CALIBRATE_DIVISOR); + } + + /* + * The CTC wasn't reliable: we got a hit on the very first read, + * or the CPU was so fast/slow that the quotient wouldn't fit in + * 32 bits.. + */ +bad_ctc: + return 0; +} |