diff options
Diffstat (limited to 'src/drivers/analogix/anx7625/anx7625.h')
| -rw-r--r-- | src/drivers/analogix/anx7625/anx7625.h | 363 |
1 files changed, 363 insertions, 0 deletions
diff --git a/src/drivers/analogix/anx7625/anx7625.h b/src/drivers/analogix/anx7625/anx7625.h new file mode 100644 index 0000000000..361ab13b4b --- /dev/null +++ b/src/drivers/analogix/anx7625/anx7625.h @@ -0,0 +1,363 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright(c) 2016, Analogix Semiconductor. All rights reserved. + * + */ + + +#include <edid.h> +#include <types.h> + +#ifndef __ANX7625_H__ +#define __ANX7625_H__ + +#ifndef LOG_TAG +#define LOG_TAG "anx7625dp" +#endif + +#define ANX7625_DRV_VERSION "0.1.04" + +/* Loading OCM re-trying times */ +#define OCM_LOADING_TIME 10 + +/********* ANX7625 Register **********/ +#define ANXI2CSIM +#ifdef ANXI2CSIM +#define TX_P0_ADDR 0x38 +#define TX_P1_ADDR 0x3D +#define TX_P2_ADDR 0x39 +#define RX_P0_ADDR 0x3F +#define RX_P1_ADDR 0x42 +#define RX_P2_ADDR 0x2A +#define TCPC_INTERFACE_ADDR 0x2C +#else +#define TX_P0_ADDR 0x70 +#define TX_P1_ADDR 0x7A +#define TX_P2_ADDR 0x72 +#define RX_P0_ADDR 0x7e +#define RX_P1_ADDR 0x84 +#define RX_P2_ADDR 0x54 +#define TCPC_INTERFACE_ADDR 0x58 +#endif + +#define RSVD_00_ADDR 0x00 +#define RSVD_D1_ADDR 0xD1 +#define RSVD_60_ADDR 0x60 +#define RSVD_39_ADDR 0x39 +#define RSVD_7F_ADDR 0x7F + +/* anx7625 clock frequency in Hz */ +#define XTAL_FRQ (27*1000000) + +#define POST_DIVIDER_MIN 1 +#define POST_DIVIDER_MAX 16 +#define PLL_OUT_FREQ_MIN 520000000UL +#define PLL_OUT_FREQ_MAX 730000000UL +#define PLL_OUT_FREQ_ABS_MIN 300000000UL +#define PLL_OUT_FREQ_ABS_MAX 800000000UL +#define MAX_UNSIGNED_24BIT 16777215UL + +/***************************************************************/ +/* Register definition of device address 0x58 */ + +#define PRODUCT_ID_L 0x02 +#define PRODUCT_ID_H 0x03 + +#define INTR_ALERT_1 0xCC +#define INTR_SOFTWARE_INT (1<<3) +#define INTR_RECEIVED_MSG (1<<5) + +#define SYSTEM_STSTUS 0x45 +#define INTERFACE_CHANGE_INT 0x44 +#define HPD_STATUS_CHANGE 0x80 +#define HPD_STATUS 0x80 + +/******** END of I2C Address 0x58 ********/ + +/***************************************************************/ +/* Register definition of device address 0x70 */ +#define I2C_ADDR_70_DPTX 0x70 + +#define SP_TX_LINK_BW_SET_REG 0xA0 +#define SP_TX_LANE_COUNT_SET_REG 0xA1 + +#define M_VID_0 0xC0 +#define M_VID_1 0xC1 +#define M_VID_2 0xC2 +#define N_VID_0 0xC3 +#define N_VID_1 0xC4 +#define N_VID_2 0xC5 + +/***************************************************************/ +/* Register definition of device address 0x72 */ +#define AUX_RST 0x04 +#define RST_CTRL2 0x07 + +#define SP_TX_TOTAL_LINE_STA_L 0x24 +#define SP_TX_TOTAL_LINE_STA_H 0x25 +#define SP_TX_ACT_LINE_STA_L 0x26 +#define SP_TX_ACT_LINE_STA_H 0x27 +#define SP_TX_V_F_PORCH_STA 0x28 +#define SP_TX_V_SYNC_STA 0x29 +#define SP_TX_V_B_PORCH_STA 0x2A +#define SP_TX_TOTAL_PIXEL_STA_L 0x2B +#define SP_TX_TOTAL_PIXEL_STA_H 0x2C +#define SP_TX_ACT_PIXEL_STA_L 0x2D +#define SP_TX_ACT_PIXEL_STA_H 0x2E +#define SP_TX_H_F_PORCH_STA_L 0x2F +#define SP_TX_H_F_PORCH_STA_H 0x30 +#define SP_TX_H_SYNC_STA_L 0x31 +#define SP_TX_H_SYNC_STA_H 0x32 +#define SP_TX_H_B_PORCH_STA_L 0x33 +#define SP_TX_H_B_PORCH_STA_H 0x34 + +#define SP_TX_VID_CTRL 0x84 +#define SP_TX_BPC_MASK 0xE0 +#define SP_TX_BPC_6 0x00 +#define SP_TX_BPC_8 0x20 +#define SP_TX_BPC_10 0x40 +#define SP_TX_BPC_12 0x60 + +#define VIDEO_BIT_MATRIX_12 0x4c + +#define AUDIO_CHANNEL_STATUS_1 0xd0 +#define AUDIO_CHANNEL_STATUS_2 0xd1 +#define AUDIO_CHANNEL_STATUS_3 0xd2 +#define AUDIO_CHANNEL_STATUS_4 0xd3 +#define AUDIO_CHANNEL_STATUS_5 0xd4 +#define AUDIO_CHANNEL_STATUS_6 0xd5 +#define TDM_SLAVE_MODE 0x10 +#define I2S_SLAVE_MODE 0x08 + +#define AUDIO_CONTROL_REGISTER 0xe6 +#define TDM_TIMING_MODE 0x08 + +#define I2C_ADDR_72_DPTX 0x72 + +#define VIDEO_CONTROL_0 0x08 + +#define ACTIVE_LINES_L 0x14 +#define ACTIVE_LINES_H 0x15 /* note: bit[7:6] are reserved */ +#define VERTICAL_FRONT_PORCH 0x16 +#define VERTICAL_SYNC_WIDTH 0x17 +#define VERTICAL_BACK_PORCH 0x18 + +#define HORIZONTAL_TOTAL_PIXELS_L 0x19 +#define HORIZONTAL_TOTAL_PIXELS_H 0x1A /* note: bit[7:6] are reserved */ +#define HORIZONTAL_ACTIVE_PIXELS_L 0x1B +#define HORIZONTAL_ACTIVE_PIXELS_H 0x1C /* note: bit[7:6] are reserved */ +#define HORIZONTAL_FRONT_PORCH_L 0x1D +#define HORIZONTAL_FRONT_PORCH_H 0x1E /* note: bit[7:4] are reserved */ +#define HORIZONTAL_SYNC_WIDTH_L 0x1F +#define HORIZONTAL_SYNC_WIDTH_H 0x20 /* note: bit[7:4] are reserved */ +#define HORIZONTAL_BACK_PORCH_L 0x21 +#define HORIZONTAL_BACK_PORCH_H 0x22 /* note: bit[7:4] are reserved */ + +/******** END of I2C Address 0x72 *********/ +/***************************************************************/ +/* Register definition of device address 0x7e */ + +#define I2C_ADDR_7E_FLASH_CONTROLLER 0x7E + +#define XTAL_FRQ_SEL 0x3F +/* bit field positions */ +#define XTAL_FRQ_SEL_POS 5 +/* bit field values */ +#define XTAL_FRQ_19M2 (0 << XTAL_FRQ_SEL_POS) +#define XTAL_FRQ_27M (4 << XTAL_FRQ_SEL_POS) + +#define R_DSC_CTRL_0 0x40 +#define READ_STATUS_EN 7 +#define CLK_1MEG_RB 6 /* 1MHz clock reset; 0=reset, 0=reset release */ +#define DSC_BIST_DONE 1 /* bit[5:1]: 1=DSC MBIST pass */ +#define DSC_EN 0x01 /* 1=DSC enabled, 0=DSC disabled */ + +#define OCM_FW_VERSION 0x31 +#define OCM_FW_REVERSION 0x32 + +#define AP_AUX_ADDR_7_0 0x11 +#define AP_AUX_ADDR_15_8 0x12 +#define AP_AUX_ADDR_19_16 0x13 + +/* note: bit[0:3] AUX status, bit 4 op_en, bit 5 address only */ +#define AP_AUX_CTRL_STATUS 0x14 +#define AP_AUX_CTRL_OP_EN 0x10 +#define AP_AUX_CTRL_ADDRONLY 0x20 + +#define AP_AUX_BUFF_START 0x15 +#define PIXEL_CLOCK_L 0x25 +#define PIXEL_CLOCK_H 0x26 + +#define AP_AUX_COMMAND 0x27 /* com+len */ +/* bit 0&1: 3D video structure */ +/* 0x01: frame packing, 0x02:Line alternative, 0x03:Side-by-side(full) */ +#define AP_AV_STATUS 0x28 +#define AP_VIDEO_CHG (1<<2) +#define AP_AUDIO_CHG (1<<3) +#define AP_MIPI_MUTE (1<<4) /* 1:MIPI input mute, 0: ummute */ +#define AP_MIPI_RX_EN (1<<5) /* 1: MIPI RX input in 0: no RX in */ +#define AP_DISABLE_PD (1<<6) +#define AP_DISABLE_DISPLAY (1<<7) +/***************************************************************/ +/* Register definition of device address 0x84 */ +#define MIPI_PHY_CONTROL_3 0x03 +#define MIPI_HS_PWD_CLK 7 +#define MIPI_HS_RT_CLK 6 +#define MIPI_PD_CLK 5 +#define MIPI_CLK_RT_MANUAL_PD_EN 4 +#define MIPI_CLK_HS_MANUAL_PD_EN 3 +#define MIPI_CLK_DET_DET_BYPASS 2 +#define MIPI_CLK_MISS_CTRL 1 +#define MIPI_PD_LPTX_CH_MANUAL_PD_EN 0 + +#define MIPI_LANE_CTRL_0 0x05 +#define MIPI_TIME_HS_PRPR 0x08 + +/* After MIPI RX protocol layer received this many video frames, */ +/* protocol layer starts to reconstruct video stream from PHY */ +#define MIPI_VIDEO_STABLE_CNT 0x0A + +#define MIPI_LANE_CTRL_10 0x0F +#define MIPI_DIGITAL_ADJ_1 0x1B + +#define MIPI_PLL_M_NUM_23_16 0x1E +#define MIPI_PLL_M_NUM_15_8 0x1F +#define MIPI_PLL_M_NUM_7_0 0x20 +#define MIPI_PLL_N_NUM_23_16 0x21 +#define MIPI_PLL_N_NUM_15_8 0x22 +#define MIPI_PLL_N_NUM_7_0 0x23 + +#define MIPI_DIGITAL_PLL_6 0x2A +/* bit[7:6]: VCO band control, only effective */ +/* when MIPI_PLL_FORCE_BAND_EN (0x84:0x2B[6]) is 1 */ +#define MIPI_M_NUM_READY 0x10 +#define MIPI_N_NUM_READY 0x08 +#define STABLE_INTEGER_CNT_EN 0x04 +#define MIPI_PLL_TEST_BIT 0 +/* bit[1:0]: test point output select - */ +/* 00: VCO power, 01: dvdd_pdt, 10: dvdd, 11: vcox */ + +#define MIPI_DIGITAL_PLL_7 0x2B +#define MIPI_PLL_FORCE_N_EN 7 +#define MIPI_PLL_FORCE_BAND_EN 6 + +#define MIPI_PLL_VCO_TUNE_REG 4 +/* bit[5:4]: VCO metal capacitance - */ +/* 00: +20% fast, 01: +10% fast (default), 10: typical, 11: -10% slow */ +#define MIPI_PLL_VCO_TUNE_REG_VAL 0x30 + +#define MIPI_PLL_PLL_LDO_BIT 2 +/* bit[3:2]: vco_v2i power - */ +/* 00: 1.40V, 01: 1.45V (default), 10: 1.50V, 11: 1.55V */ +#define MIPI_PLL_RESET_N 0x02 +#define MIPI_FRQ_FORCE_NDET 0 + +#define MIPI_ALERT_CLR_0 0x2D +#define HS_link_error_clear 7 +/* This bit itself is S/C, and it clears 0x84:0x31[7] */ + +#define MIPI_ALERT_OUT_0 0x31 +#define check_sum_err_hs_sync 7 +/* This bit is cleared by 0x84:0x2D[7] */ + +#define MIPI_DIGITAL_PLL_8 0x33 +#define MIPI_POST_DIV_VAL 4 +/* n means divided by (n+1), n = 0~15 */ +#define MIPI_EN_LOCK_FRZ 3 +#define MIPI_FRQ_COUNTER_RST 2 +#define MIPI_FRQ_SET_REG_8 1 +/* bit 0 is reserved */ + +#define MIPI_DIGITAL_PLL_9 0x34 + +#define MIPI_DIGITAL_PLL_16 0x3B +#define MIPI_FRQ_FREEZE_NDET 7 +#define MIPI_FRQ_REG_SET_ENABLE 6 +#define MIPI_REG_FORCE_SEL_EN 5 +#define MIPI_REG_SEL_DIV_REG 4 +#define MIPI_REG_FORCE_PRE_DIV_EN 3 +/* bit 2 is reserved */ +#define MIPI_FREF_D_IND 1 +#define REF_CLK_27000kHz 1 +#define REF_CLK_19200kHz 0 +#define MIPI_REG_PLL_PLL_TEST_ENABLE 0 + +#define MIPI_DIGITAL_PLL_18 0x3D +#define FRQ_COUNT_RB_SEL 7 +#define REG_FORCE_POST_DIV_EN 6 +#define MIPI_DPI_SELECT 5 +#define SELECT_DSI 1 +#define SELECT_DPI 0 +#define REG_BAUD_DIV_RATIO 0 + +#define H_BLANK_L 0x3E +/* for DSC only */ +#define H_BLANK_H 0x3F +/* for DSC only; note: bit[7:6] are reserved */ +#define MIPI_SWAP 0x4A +#define MIPI_SWAP_CH0 7 +#define MIPI_SWAP_CH1 6 +#define MIPI_SWAP_CH2 5 +#define MIPI_SWAP_CH3 4 +#define MIPI_SWAP_CLK 3 +/* bit[2:0] are reserved */ + +/******** END of I2C Address 0x84 *********/ + +/* DPCD regs */ +#define DPCD_DPCD_REV 0x00 +#define DPCD_MAX_LINK_RATE 0x01 +#define DPCD_MAX_LANE_COUNT 0x02 + +/********* ANX7625 Register End **********/ + +/***************** Display *****************/ +enum AudioFs { + AUDIO_FS_441K = 0x00, + AUDIO_FS_48K = 0x02, + AUDIO_FS_32K = 0x03, + AUDIO_FS_882K = 0x08, + AUDIO_FS_96K = 0x0a, + AUDIO_FS_1764K = 0x0c, + AUDIO_FS_192K = 0x0e +}; + +enum AudioWdLen { + AUDIO_W_LEN_16_20MAX = 0x02, + AUDIO_W_LEN_18_20MAX = 0x04, + AUDIO_W_LEN_17_20MAX = 0x0c, + AUDIO_W_LEN_19_20MAX = 0x08, + AUDIO_W_LEN_20_20MAX = 0x0a, + AUDIO_W_LEN_20_24MAX = 0x03, + AUDIO_W_LEN_22_24MAX = 0x05, + AUDIO_W_LEN_21_24MAX = 0x0d, + AUDIO_W_LEN_23_24MAX = 0x09, + AUDIO_W_LEN_24_24MAX = 0x0b +}; + +#define I2S_CH_2 0x01 +#define TDM_CH_4 0x03 +#define TDM_CH_6 0x05 +#define TDM_CH_8 0x07 + +#define MAX_DPCD_BUFFER_SIZE 16 + +#define ONE_BLOCK_SIZE 128 +#define FOUR_BLOCK_SIZE (128*4) + +struct display_timing { + unsigned int pixelclock; + unsigned int hactive; + unsigned int hfront_porch; + unsigned int hback_porch; + unsigned int hsync_len; + unsigned int vactive; + unsigned int vfront_porch; + unsigned int vback_porch; + unsigned int vsync_len; +}; + +int anx7625_dp_start(uint8_t bus, const struct edid *edid); +int anx7625_dp_get_edid(uint8_t bus, struct edid *out); +int anx7625_init(uint8_t bus); +#endif /* __ANX7625_H__ */ |