summaryrefslogtreecommitdiff
path: root/src/devices
diff options
context:
space:
mode:
Diffstat (limited to 'src/devices')
-rw-r--r--src/devices/device.c76
-rw-r--r--src/devices/pci_device.c19
-rw-r--r--src/devices/root_device.c81
3 files changed, 103 insertions, 73 deletions
diff --git a/src/devices/device.c b/src/devices/device.c
index 033f41d2ca..87e627d52c 100644
--- a/src/devices/device.c
+++ b/src/devices/device.c
@@ -376,13 +376,14 @@ static void allocate_vga_resource(void)
struct bus *bus;
bus = 0;
vga = 0;
- for(dev = all_devices; dev; dev = dev->next) {
+ for (dev = all_devices; dev; dev = dev->next) {
if (((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) &&
- ((dev->class >> 8) != PCI_CLASS_DISPLAY_OTHER))
- {
+ ((dev->class >> 8) != PCI_CLASS_DISPLAY_OTHER)) {
if (!vga) {
printk_debug("Allocating VGA resource %s\n",
- dev_path(dev));
+ dev_path(dev));
+ printk_debug("parent of the vga device %s\n",
+ dev_path(dev->bus->dev));
vga = dev;
}
if (vga == dev) {
@@ -398,19 +399,28 @@ static void allocate_vga_resource(void)
bus = vga->bus;
}
/* Now walk up the bridges setting the VGA enable */
- while(bus) {
+ while (bus) {
+ printk_info("Enabling VGA forward on bus connect to %s\n",
+ dev_path(bus->dev));
bus->bridge_ctrl |= PCI_BRIDGE_CTL_VGA;
bus = (bus == bus->dev->bus)? 0 : bus->dev->bus;
}
}
-/** Assign the computed resources to the bridges and devices on the bus.
- * Recurse to any bridges found on this bus first. Then do the devices
- * on this bus.
- *
+/**
+ * @brief Assign the computed resources to the devices on the bus.
+ *
* @param bus Pointer to the structure for this bus
- */
+ *
+ * Use the device specific set_resources method to store the computed
+ * resources to hardware. For bridge devices, the set_resources() method
+ * has to recurse into every down stream buses.
+ *
+ * Mutual recursion:
+ * assign_resources() -> device_operation::set_resources()
+ * device_operation::set_resources() -> assign_resources()
+ */
void assign_resources(struct bus *bus)
{
struct device *curdev;
@@ -418,7 +428,7 @@ void assign_resources(struct bus *bus)
printk_spew("%s assign_resources, bus %d link: %d\n",
dev_path(bus->dev), bus->secondary, bus->link);
- for(curdev = bus->children; curdev; curdev = curdev->sibling) {
+ for (curdev = bus->children; curdev; curdev = curdev->sibling) {
if (!curdev->enabled || !curdev->resources) {
continue;
}
@@ -443,10 +453,13 @@ void assign_resources(struct bus *bus)
*
* The parent's resources should be enabled first to avoid having enabling
* order problem. This is done by calling the parent's enable_resources()
- * method and let that method to call it's children's enable_resoruces() via
- * enable_childrens_resources().
+ * method and let that method to call it's children's enable_resoruces()
+ * method via the (global) enable_childrens_resources().
*
* Indirect mutual recursion:
+ * enable_resources() -> device_operations::enable_resource()
+ * device_operations::enable_resource() -> enable_children_resources()
+ * enable_children_resources() -> enable_resources()
*/
void enable_resources(struct device *dev)
{
@@ -461,16 +474,25 @@ void enable_resources(struct device *dev)
}
/**
- * @brief Determine the existence of dynamic devices and construct dynamic
+ * @brief Determine the existence of devices and extend the device tree.
+ *
+ * Most of the devices in the system are listed in the mainboard Config.lb
+ * file. The device structures for these devices are generated at compile
+ * time by the config tool and are organized into the device tree. This
+ * function determines if the devices created at compile time actually exist
+ * in the physical system.
+ *
+ * For devices in the physical system but not listed in the Config.lb file,
+ * the device structures have to be created at run time and attached to the
* device tree.
*
- * Start from the root device 'dev_root', scan the buses in the system
- * recursively, build the dynamic device tree according to the result
- * of the probe.
+ * This function starts from the root device 'dev_root', scan the buses in
+ * the system recursively, modify the device tree according to the result of
+ * the probe.
*
* This function has no idea how to scan and probe buses and devices at all.
* It depends on the bus/device specific scan_bus() method to do it. The
- * scan_bus() function also has to create the device structure and attach
+ * scan_bus() method also has to create the device structure and attach
* it to the device tree.
*/
void dev_enumerate(void)
@@ -490,12 +512,13 @@ void dev_enumerate(void)
printk_info("done\n");
}
-
/**
* @brief Configure devices on the devices tree.
*
- * Starting at the root of the dynamic device tree, travel recursively,
- * and compute resources needed by each device and allocate them.
+ * Starting at the root of the device tree, travel it recursively in two
+ * passes. In the first pass, we compute and allocate resources (ranges)
+ * requried by each device. In the second pass, the resources ranges are
+ * relocated to their final position and stored to the hardware.
*
* I/O resources start at DEVICE_IO_START and grow upward. MEM resources start
* at DEVICE_MEM_START and grow downward.
@@ -519,7 +542,10 @@ void dev_configure(void)
printk_err("dev_root missing set_resources\n");
return;
}
+
+ printk_info("Reading resources...\n");
root->ops->read_resources(root);
+ printk_info("Done\n");
/* Get the resources */
io = &root->resource[0];
@@ -539,8 +565,9 @@ void dev_configure(void)
allocate_vga_resource();
/* Store the computed resource allocations into device registers ... */
+ printk_info("Setting resources...\n");
root->ops->set_resources(root);
-
+ printk_info("Done\n");
#if 0
mem->flags |= IORESOURCE_STORED;
report_resource_stored(root, mem, "");
@@ -569,14 +596,15 @@ void dev_enable(void)
* @brief Initialize all devices in the global device list.
*
* Starting at the first device on the global device link list,
- * walk the list and call a driver to do device specific setup.
+ * walk the list and call the device's init() method to do deivce
+ * specific setup.
*/
void dev_initialize(void)
{
struct device *dev;
printk_info("Initializing devices...\n");
- for(dev = all_devices; dev; dev = dev->next) {
+ for (dev = all_devices; dev; dev = dev->next) {
if (dev->enabled && !dev->initialized &&
dev->ops && dev->ops->init)
{
diff --git a/src/devices/pci_device.c b/src/devices/pci_device.c
index bd5e2775fe..a32c3a675f 100644
--- a/src/devices/pci_device.c
+++ b/src/devices/pci_device.c
@@ -569,9 +569,9 @@ static void set_pci_ops(struct device *dev)
/* Look through the list of setup drivers and find one for
* this pci device
*/
- for(driver = &pci_drivers[0]; driver != &epci_drivers[0]; driver++) {
+ for (driver = &pci_drivers[0]; driver != &epci_drivers[0]; driver++) {
if ((driver->vendor == dev->vendor) &&
- (driver->device == dev->device))
+ (driver->device == dev->device))
{
dev->ops = driver->ops;
printk_debug("%s [%04x/%04x] %sops\n",
@@ -665,9 +665,6 @@ static struct device *pci_scan_get_dev(struct device **list, unsigned int devfn)
* Determine the existence of devices and bridges on a PCI bus. If there are
* bridges on the bus, recursively scan the buses behind the bridges.
*
- * This function is the default scan_bus() method for the root device
- * 'dev_root'.
- *
* @param bus pointer to the bus structure
* @param min_devfn minimum devfn to look at in the scan usually 0x00
* @param max_devfn maximum devfn to look at in the scan usually 0xff
@@ -709,8 +706,8 @@ unsigned int pci_scan_bus(struct bus *bus,
dummy.path.u.pci.devfn = devfn;
id = pci_read_config32(&dummy, PCI_VENDOR_ID);
/* some broken boards return 0 if a slot is empty: */
- if ( (id == 0xffffffff) || (id == 0x00000000) ||
- (id == 0x0000ffff) || (id == 0xffff0000))
+ if ((id == 0xffffffff) || (id == 0x00000000) ||
+ (id == 0x0000ffff) || (id == 0xffff0000))
{
printk_spew("PCI: devfn 0x%x, bad id 0x%x\n", devfn, id);
if (PCI_FUNC(devfn) == 0x00) {
@@ -753,7 +750,7 @@ unsigned int pci_scan_bus(struct bus *bus,
* that may not always show up.
*/
if (id == 0xffffffff || id == 0x00000000 ||
- id == 0x0000ffff || id == 0xffff0000)
+ id == 0x0000ffff || id == 0xffff0000)
{
if (dev->enabled) {
printk_info("Disabling static device: %s\n",
@@ -816,10 +813,10 @@ unsigned int pci_scan_bus(struct bus *bus,
/* For all children that implement scan_bus (i.e. bridges)
* scan the bus behind that child.
*/
- for(child = bus->children; child; child = child->sibling) {
+ for (child = bus->children; child; child = child->sibling) {
if (!child->enabled ||
- !child->ops ||
- !child->ops->scan_bus)
+ !child->ops ||
+ !child->ops->scan_bus)
{
continue;
}
diff --git a/src/devices/root_device.c b/src/devices/root_device.c
index 897a5a3bbf..a02fe7a060 100644
--- a/src/devices/root_device.c
+++ b/src/devices/root_device.c
@@ -35,7 +35,8 @@ void root_dev_read_resources(device_t root)
}
/**
- * Write the resources for the root device,
+ * @brief Write the resources for the root device
+ *
* and every device under it which are all of the devices.
* @param root Pointer to the device structure for the system root device
*/
@@ -44,10 +45,10 @@ void root_dev_set_resources(device_t root)
struct bus *bus;
bus = &root->link[0];
- compute_allocate_resource(bus,
- &root->resource[0], IORESOURCE_IO, IORESOURCE_IO);
- compute_allocate_resource(bus,
- &root->resource[1], IORESOURCE_MEM, IORESOURCE_MEM);
+ compute_allocate_resource(bus, &root->resource[0],
+ IORESOURCE_IO, IORESOURCE_IO);
+ compute_allocate_resource(bus, &root->resource[1],
+ IORESOURCE_MEM, IORESOURCE_MEM);
assign_resources(bus);
}
@@ -56,26 +57,32 @@ void root_dev_set_resources(device_t root)
*
* The enumeration of certain buses is purely static. The existence of
* devices on those buses can be completely determined at compile time
- * by the config file. Typical expamles are the 'PNP' devices on a legacy
- * ISA/LPC bus. There is no need of probing of any kind, the only thing
- * we have to do is to walk through the bus and enable or disable devices
- * as indicated in the config file.
+ * and is specified in the config file. Typical exapmles are the 'PNP'
+ * devices on a legacy ISA/LPC bus. There is no need of probing of any
+ * kind, the only thing we have to do is to walk through the bus and
+ * enable or disable devices as indicated in the config file.
*
- * This function is the default scan_bus() method for LPC bridges.
+ * On the other hand, some devices are virtual and their existence is
+ * artificial. They can not be probed at run time. One example is the
+ * debug device. Those virtual devices have to be listed in the config
+ * file under some static bus in order to be enumerated at run time.
*
- * @param root Pointer to the device structure for the system root device
- * @param max Maximum bus number allowed in the system.
- * @return Largest bus number used.
+ * This function is the default scan_bus() method for the root device and
+ * LPC bridges.
+ *
+ * @param root Pointer to the root device which the static buses are attached
+ * @param max Maximum bus number currently used before scanning.
+ * @return Largest bus number used after scanning.
*/
-unsigned int scan_static_bus(device_t bus, unsigned int max)
+unsigned int scan_static_bus(device_t root, unsigned int max)
{
device_t child;
unsigned link;
-
- printk_spew("%s for %s\n", __func__, dev_path(bus));
- for(link = 0; link < bus->links; link++) {
- for(child = bus->link[link].children; child; child = child->sibling) {
+ printk_spew("%s for %s\n", __func__, dev_path(root));
+
+ for (link = 0; link < root->links; link++) {
+ for (child = root->link[link].children; child; child = child->sibling) {
if (child->chip_ops && child->chip_ops->enable_dev) {
child->chip_ops->enable_dev(child);
}
@@ -87,8 +94,8 @@ unsigned int scan_static_bus(device_t bus, unsigned int max)
child->enabled?"enabled": "disabled");
}
}
- for(link = 0; link < bus->links; link++) {
- for(child = bus->link[link].children; child; child = child->sibling) {
+ for (link = 0; link < root->links; link++) {
+ for (child = root->link[link].children; child; child = child->sibling) {
if (!child->ops || !child->ops->scan_bus)
continue;
printk_spew("%s scanning...\n", dev_path(child));
@@ -96,7 +103,7 @@ unsigned int scan_static_bus(device_t bus, unsigned int max)
}
}
- printk_spew("%s done\n", __func__);
+ printk_spew("%s for %s done\n", __func__, dev_path(root));
return max;
}
@@ -106,17 +113,20 @@ unsigned int scan_static_bus(device_t bus, unsigned int max)
*
* @param dev the device whos children's resources are to be enabled
*
- * This function is call by the enable_resource() indirectly via the
- * enable_resources() method of devices.
+ * This function is call by the global enable_resources() indirectly via the
+ * device_operation::enable_resources() method of devices.
*
* Indirect mutual recursion:
+ * enable_childrens_resources() -> enable_resources()
+ * enable_resources() -> device_operation::enable_resources()
+ * device_operation::enable_resources() -> enable_children_resources()
*/
void enable_childrens_resources(device_t dev)
{
unsigned link;
- for(link = 0; link < dev->links; link++) {
+ for (link = 0; link < dev->links; link++) {
device_t child;
- for(child = dev->link[link].children; child; child = child->sibling) {
+ for (child = dev->link[link].children; child; child = child->sibling) {
enable_resources(child);
}
}
@@ -131,12 +141,9 @@ void root_dev_enable_resources(device_t dev)
* @brief Scan root bus for generic systems
*
* @param root The root device structure
- * @param max The current bus number scanned so fat, usually 0x00
+ * @param max The current bus number scanned so far, usually 0x00
*
- * This function is the default scan_bus() method of the dynamic root device.
- * The bus heirachy is rooted at the host/northbridge. The northbridge of a
- * generic PCI bus system is at Bus 0, Dev 0, Fun 0 so we scan the whole PCI
- * buses from there.
+ * This function is the default scan_bus() method of the root device.
*/
unsigned int root_dev_scan_bus(device_t root, unsigned int max)
{
@@ -150,11 +157,9 @@ void root_dev_init(device_t root)
/**
* @brief Default device operation for root device
*
- * This is the default device operation for root devices in PCI based systems.
- * These operations should be fully usable as is. However the
- * chip_operations::dev_enable of a motherboard can override this if you
- * want non-default behavior. Currently src/mainboard/arima/hdama/mainbaord.c
- * does this for debugging purposes.
+ * This is the default device operation for root devices. These operations
+ * should be fully usable as is. However the chip_operations::enable_dev()
+ * of a motherboard can override this if you want non-default behavior.
*/
struct device_operations default_dev_ops_root = {
.read_resources = root_dev_read_resources,
@@ -165,9 +170,9 @@ struct device_operations default_dev_ops_root = {
};
/**
- * @brief The root of dynamic device tree.
+ * @brief The root of device tree.
*
- * This is the root of the dynamic device tree. A PCI tree always has
- * one bus, bus 0. Bus 0 contains devices and bridges.
+ * This is the root of the device tree. The device tree is defined in the
+ * static.c file and is generated by config tool during compile time.
*/
extern struct device dev_root;