diff options
Diffstat (limited to 'src/device')
| -rw-r--r-- | src/device/Kconfig | 5 | ||||
| -rw-r--r-- | src/device/Makefile.inc | 1 | ||||
| -rw-r--r-- | src/device/azalia_device.c | 276 |
3 files changed, 282 insertions, 0 deletions
diff --git a/src/device/Kconfig b/src/device/Kconfig index ca2fb33028..4087f6fd4a 100644 --- a/src/device/Kconfig +++ b/src/device/Kconfig @@ -226,6 +226,11 @@ config CARDBUS_PLUGIN_SUPPORT depends on PCI default y +config AZALIA_PLUGIN_SUPPORT + bool + depends on PCI + default n + config PCIEXP_COMMON_CLOCK prompt "Enable PCIe Common Clock" bool diff --git a/src/device/Makefile.inc b/src/device/Makefile.inc index 9fe156ba8c..96e2cd9679 100644 --- a/src/device/Makefile.inc +++ b/src/device/Makefile.inc @@ -8,6 +8,7 @@ ramstage-$(CONFIG_PCIX_PLUGIN_SUPPORT) += pcix_device.c ramstage-$(CONFIG_PCIEXP_PLUGIN_SUPPORT) += pciexp_device.c ramstage-$(CONFIG_AGP_PLUGIN_SUPPORT) += agp_device.c ramstage-$(CONFIG_CARDBUS_PLUGIN_SUPPORT) += cardbus_device.c +ramstage-$(CONFIG_AZALIA_PLUGIN_SUPPORT) += azalia_device.c ramstage-$(CONFIG_ARCH_X86) += pnp_device.c ramstage-$(CONFIG_PCI) += pci_ops.c ramstage-y += smbus_ops.c diff --git a/src/device/azalia_device.c b/src/device/azalia_device.c new file mode 100644 index 0000000000..cbc878d920 --- /dev/null +++ b/src/device/azalia_device.c @@ -0,0 +1,276 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 DMP Electronics Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include <device/azalia_device.h> +#include <arch/io.h> +#include <delay.h> + +#define HDA_ICII_REG 0x68 +#define HDA_ICII_BUSY (1 << 0) +#define HDA_ICII_VALID (1 << 1) + +static int set_bits(u32 port, u32 mask, u32 val) +{ + u32 reg32; + int count; + + /* Write (val & mask) to port */ + val &= mask; + reg32 = read32(port); + reg32 &= ~mask; + reg32 |= val; + write32(port, reg32); + + /* Wait for readback of register to + * match what was just written to it + */ + count = 50; + do { + /* Wait 1ms based on BKDG wait time */ + mdelay(1); + reg32 = read32(port); + reg32 &= mask; + } while ((reg32 != val) && --count); + + /* Timeout occurred */ + if (!count) + return -1; + return 0; +} + +static int codec_detect(u32 base) +{ + u32 reg32; + int count; + + /* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */ + if (set_bits(base + 0x08, 1, 1) == -1) + goto no_codec; + + /* clear STATESTS bits (BAR + 0xE)[2:0] */ + reg32 = read32(base + 0x0E); + reg32 |= 7; + write32(base + 0x0E, reg32); + + /* Wait for readback of register to + * match what was just written to it + */ + count = 50; + do { + /* Wait 1ms based on BKDG wait time */ + mdelay(1); + reg32 = read32(base + 0x0E); + } while ((reg32 != 0) && --count); + /* Timeout occured */ + if (!count) + goto no_codec; + + /* Set Bit0 to 0 to enter reset state (BAR + 0x8)[0] */ + if (set_bits(base + 0x08, 1, 0) == -1) + goto no_codec; + + /* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */ + if (set_bits(base + 0x08, 1, 1) == -1) + goto no_codec; + + /* Read in Codec location (BAR + 0xe)[2..0] */ + reg32 = read32(base + 0xe); + reg32 &= 0x0f; + if (!reg32) + goto no_codec; + + return reg32; + +no_codec: + /* Codec Not found */ + /* Put HDA back in reset (BAR + 0x8) [0] */ + set_bits(base + 0x08, 1, 0); + printk(BIOS_DEBUG, "azalia_audio: No codec!\n"); + return 0; +} + +const u32 *cim_verb_data = NULL; +u32 cim_verb_data_size = 0; + +static u32 find_verb(struct device *dev, u32 viddid, const u32 ** verb) +{ + printk(BIOS_DEBUG, "azalia_audio: dev=%s\n", dev_path(dev)); + printk(BIOS_DEBUG, "azalia_audio: Reading viddid=%x\n", viddid); + + int idx = 0; + + while (idx < (cim_verb_data_size / sizeof(u32))) { + u32 verb_size = 4 * cim_verb_data[idx + 2]; // in u32 + if (cim_verb_data[idx] != viddid) { + idx += verb_size + 3; // skip verb + header + continue; + } + *verb = &cim_verb_data[idx + 3]; + return verb_size; + } + + /* Not all codecs need to load another verb */ + return 0; +} + +/** + * Wait 50usec for the codec to indicate it is ready + * no response would imply that the codec is non-operative + */ + +static int wait_for_ready(u32 base) +{ + /* Use a 50 usec timeout - the Linux kernel uses the + * same duration */ + + int timeout = 50; + + while (timeout--) { + u32 reg32 = read32(base + HDA_ICII_REG); + if (!(reg32 & HDA_ICII_BUSY)) + return 0; + udelay(1); + } + + return -1; +} + +/** + * Wait 50usec for the codec to indicate that it accepted + * the previous command. No response would imply that the code + * is non-operative + */ + +static int wait_for_valid(u32 base) +{ + /* Use a 50 usec timeout - the Linux kernel uses the + * same duration */ + + int timeout = 25; + + write32(base + HDA_ICII_REG, HDA_ICII_VALID | HDA_ICII_BUSY); + while (timeout--) { + udelay(1); + } + timeout = 50; + while (timeout--) { + u32 reg32 = read32(base + HDA_ICII_REG); + if ((reg32 & (HDA_ICII_VALID | HDA_ICII_BUSY)) == + HDA_ICII_VALID) + return 0; + udelay(1); + } + + return -1; +} + +static void codec_init(struct device *dev, u32 base, int addr) +{ + u32 reg32; + const u32 *verb; + u32 verb_size; + int i; + + printk(BIOS_DEBUG, "azalia_audio: Initializing codec #%d\n", addr); + + /* 1 */ + if (wait_for_ready(base) == -1) + return; + + reg32 = (addr << 28) | 0x000f0000; + write32(base + 0x60, reg32); + + if (wait_for_valid(base) == -1) + return; + + reg32 = read32(base + 0x64); + + /* 2 */ + printk(BIOS_DEBUG, "azalia_audio: codec viddid: %08x\n", reg32); + verb_size = find_verb(dev, reg32, &verb); + + if (!verb_size) { + printk(BIOS_DEBUG, "azalia_audio: No verb!\n"); + return; + } + printk(BIOS_DEBUG, "azalia_audio: verb_size: %d\n", verb_size); + + /* 3 */ + for (i = 0; i < verb_size; i++) { + if (wait_for_ready(base) == -1) + return; + + write32(base + 0x60, verb[i]); + + if (wait_for_valid(base) == -1) + return; + } + printk(BIOS_DEBUG, "azalia_audio: verb loaded.\n"); +} + +static void codecs_init(struct device *dev, u32 base, u32 codec_mask) +{ + int i; + + for (i = 2; i >= 0; i--) { + if (codec_mask & (1 << i)) + codec_init(dev, base, i); + } +} + +void azalia_audio_init(struct device *dev) +{ + u32 base; + struct resource *res; + u32 codec_mask; + + res = find_resource(dev, 0x10); + if (!res) + return; + + // NOTE this will break as soon as the azalia_audio get's a bar above + // 4G. Is there anything we can do about it? + base = (u32) res->base; + printk(BIOS_DEBUG, "azalia_audio: base = %08x\n", (u32) base); + codec_mask = codec_detect(base); + + if (codec_mask) { + printk(BIOS_DEBUG, "azalia_audio: codec_mask = %02x\n", + codec_mask); + codecs_init(dev, base, codec_mask); + } +} + +struct pci_operations azalia_audio_pci_ops = { + .set_subsystem = pci_dev_set_subsystem, +}; + +struct device_operations default_azalia_audio_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = azalia_audio_init, + .scan_bus = 0, + .ops_pci = &azalia_audio_pci_ops, +}; |