diff options
Diffstat (limited to 'src/cpu')
-rw-r--r-- | src/cpu/amd/car/post_cache_as_ram.c | 10 | ||||
-rw-r--r-- | src/cpu/amd/dualcore/amd_sibling.c | 2 | ||||
-rw-r--r-- | src/cpu/amd/model_fxx/fidvid.c | 12 | ||||
-rw-r--r-- | src/cpu/amd/model_fxx/init_cpus.c | 16 | ||||
-rw-r--r-- | src/cpu/amd/model_lx/cpureginit.c | 24 | ||||
-rw-r--r-- | src/cpu/amd/quadcore/amd_sibling.c | 2 | ||||
-rw-r--r-- | src/cpu/amd/sc520/raminit.c | 62 | ||||
-rw-r--r-- | src/cpu/intel/microcode/microcode.c | 4 | ||||
-rw-r--r-- | src/cpu/intel/model_106cx/cache_as_ram_disable.c | 8 |
9 files changed, 70 insertions, 70 deletions
diff --git a/src/cpu/amd/car/post_cache_as_ram.c b/src/cpu/amd/car/post_cache_as_ram.c index 939990997c..b8a7285b89 100644 --- a/src/cpu/amd/car/post_cache_as_ram.c +++ b/src/cpu/amd/car/post_cache_as_ram.c @@ -5,7 +5,7 @@ static inline void print_debug_pcar(const char *strval, uint32_t val) { - printk(BIOS_DEBUG, "%s%08x\r\n", strval, val); + printk(BIOS_DEBUG, "%s%08x\n", strval, val); } /* from linux kernel 2.6.32 asm/string_32.h */ @@ -86,10 +86,10 @@ static void post_cache_as_ram(void) /* We can put data to stack again */ /* only global variable sysinfo in cache need to be offset */ - print_debug("Done\r\n"); + print_debug("Done\n"); print_debug_pcar("testx = ", testx); - print_debug("Disabling cache as ram now \r\n"); + print_debug("Disabling cache as ram now \n"); disable_cache_as_ram_bsp(); print_debug("Clearing initial memory region: "); @@ -99,7 +99,7 @@ static void post_cache_as_ram(void) #else memset((void*)0, 0, ((CONFIG_RAMTOP) - CONFIG_DCACHE_RAM_SIZE)); #endif - print_debug("Done\r\n"); + print_debug("Done\n"); // dump_mem((CONFIG_RAMTOP) - 0x8000, (CONFIG_RAMTOP) - 0x7c00); @@ -115,5 +115,5 @@ static void post_cache_as_ram(void) copy_and_run(); /* We will not return */ - print_debug("should not be here -\r\n"); + print_debug("should not be here -\n"); } diff --git a/src/cpu/amd/dualcore/amd_sibling.c b/src/cpu/amd/dualcore/amd_sibling.c index 3a56fdd1c3..42d96c509a 100644 --- a/src/cpu/amd/dualcore/amd_sibling.c +++ b/src/cpu/amd/dualcore/amd_sibling.c @@ -109,7 +109,7 @@ unsigned get_apicid_base(unsigned ioapic_num) if((apicid_base+ioapic_num-1)>0xf) { // We need to enable APIC EXT ID - printk(BIOS_INFO, "if the IO APIC device doesn't support 256 apic id, \r\n you need to set CONFIG_ENABLE_APIC_EXT_ID in romstage.c so you can spare 16 id for ioapic\r\n"); + printk(BIOS_INFO, "if the IO APIC device doesn't support 256 apic id, \n you need to set CONFIG_ENABLE_APIC_EXT_ID in romstage.c so you can spare 16 id for ioapic\n"); enable_apic_ext_id(nodes); } diff --git a/src/cpu/amd/model_fxx/fidvid.c b/src/cpu/amd/model_fxx/fidvid.c index 59cb5460d2..2b23e11c1d 100644 --- a/src/cpu/amd/model_fxx/fidvid.c +++ b/src/cpu/amd/model_fxx/fidvid.c @@ -15,21 +15,21 @@ static inline void print_debug_fv(const char *str, unsigned val) { #if K8_SET_FIDVID_DEBUG == 1 - printk(BIOS_DEBUG, "%s%x\r\n", str, val); + printk(BIOS_DEBUG, "%s%x\n", str, val); #endif } static inline void print_debug_fv_8(const char *str, unsigned val) { #if K8_SET_FIDVID_DEBUG == 1 - printk(BIOS_DEBUG, "%s%02x\r\n", str, val); + printk(BIOS_DEBUG, "%s%02x\n", str, val); #endif } static inline void print_debug_fv_64(const char *str, unsigned val, unsigned val2) { #if K8_SET_FIDVID_DEBUG == 1 - printk(BIOS_DEBUG, "%s%x%x\r\n", str, val, val2); + printk(BIOS_DEBUG, "%s%x%x\n", str, val, val2); #endif } @@ -131,7 +131,7 @@ static u32 set_fidvid(unsigned apicid, unsigned fidvid, int showmessage) apicidx = lapicid(); if (apicid != apicidx) { - printk(BIOS_ERR, "wrong apicid, we want change %x, but it is %x\r\n", apicid, apicidx); + printk(BIOS_ERR, "wrong apicid, we want change %x, but it is %x\n", apicid, apicidx); return fidvid; } @@ -328,10 +328,10 @@ static u32 set_fidvid(unsigned apicid, unsigned fidvid, int showmessage) if (showmessage) { if (vid_new != vid_cur) { - print_err("set vid failed for apicid ="); print_err_hex8(apicidx); print_err("\r\n"); + print_err("set vid failed for apicid ="); print_err_hex8(apicidx); print_err("\n"); } if (fid_new != fid_cur) { - print_err("set fid failed for apicid ="); print_err_hex8(apicidx); print_err("\r\n"); + print_err("set fid failed for apicid ="); print_err_hex8(apicidx); print_err("\n"); } } diff --git a/src/cpu/amd/model_fxx/init_cpus.c b/src/cpu/amd/model_fxx/init_cpus.c index 847a8a7fa6..151eb6f01c 100644 --- a/src/cpu/amd/model_fxx/init_cpus.c +++ b/src/cpu/amd/model_fxx/init_cpus.c @@ -16,7 +16,7 @@ static inline void print_initcpu8 (const char *strval, unsigned val) { - printk(BIOS_DEBUG, "%s%02x\r\n", strval, val); + printk(BIOS_DEBUG, "%s%02x\n", strval, val); } static inline void print_initcpu8_nocr (const char *strval, unsigned val) @@ -27,12 +27,12 @@ static inline void print_initcpu8_nocr (const char *strval, unsigned val) static inline void print_initcpu16 (const char *strval, unsigned val) { - printk(BIOS_DEBUG, "%s%04x\r\n", strval, val); + printk(BIOS_DEBUG, "%s%04x\n", strval, val); } static inline void print_initcpu(const char *strval, unsigned val) { - printk(BIOS_DEBUG, "%s%08x\r\n", strval, val); + printk(BIOS_DEBUG, "%s%08x\n", strval, val); } typedef void (*process_ap_t)(unsigned apicid, void *gp); @@ -155,7 +155,7 @@ static void init_fidvid_ap(unsigned bsp_apicid, unsigned apicid); static inline __attribute__((always_inline)) void print_apicid_nodeid_coreid(unsigned apicid, struct node_core_id id, const char *str) { - printk(BIOS_DEBUG, "%s --- { APICID = %02x NODEID = %02x COREID = %02x} ---\r\n", str, apicid, id.nodeid, id.coreid); + printk(BIOS_DEBUG, "%s --- { APICID = %02x NODEID = %02x COREID = %02x} ---\n", str, apicid, id.nodeid, id.coreid); } @@ -201,7 +201,7 @@ static void wait_all_other_cores_started(unsigned bsp_apicid) // all aps other t { print_debug("started ap apicid: "); for_each_ap(bsp_apicid, 2 , wait_ap_started, (void *)0); - print_debug("\r\n"); + print_debug("\n"); } static void allow_all_aps_stop(unsigned bsp_apicid) @@ -286,8 +286,8 @@ static unsigned init_cpus(unsigned cpu_init_detectedx) #endif if (cpu_init_detectedx) { - print_apicid_nodeid_coreid(apicid, id, "\r\n\r\n\r\nINIT detected from "); - print_debug("\r\nIssuing SOFT_RESET...\r\n"); + print_apicid_nodeid_coreid(apicid, id, "\n\n\nINIT detected from "); + print_debug("\nIssuing SOFT_RESET...\n"); soft_reset(); } @@ -351,7 +351,7 @@ static void wait_all_core0_started(void) while(!is_core0_started(i)) {} print_initcpu8_nocr(" ", i); } - print_debug("\r\n"); + print_debug("\n"); } diff --git a/src/cpu/amd/model_lx/cpureginit.c b/src/cpu/amd/model_lx/cpureginit.c index ac8b7b1f66..a80c0922c0 100644 --- a/src/cpu/amd/model_lx/cpureginit.c +++ b/src/cpu/amd/model_lx/cpureginit.c @@ -209,9 +209,9 @@ void SetDelayControl(void) print_debug_hex32(msr.hi); print_debug(" and lo "); print_debug_hex32(msr.lo); - print_debug("\r\n"); + print_debug("\n"); wrmsr(GLCP_DELAY_CONTROLS, msr); - print_debug("SetDelayControl done\r\n"); + print_debug("SetDelayControl done\n"); return; } @@ -225,7 +225,7 @@ void cpuRegInit(void) /* Castle 2.0 BTM periodic sync period. */ /* [40:37] 1 sync record per 256 bytes */ - print_debug("Castle 2.0 BTM periodic sync period.\r\n"); + print_debug("Castle 2.0 BTM periodic sync period.\n"); msrnum = CPU_PF_CONF; msr = rdmsr(msrnum); msr.hi |= (0x8 << 5); @@ -235,7 +235,7 @@ void cpuRegInit(void) * LX performance setting. * Enable Quack for fewer re-RAS on the MC */ - print_debug("Enable Quack for fewer re-RAS on the MC\r\n"); + print_debug("Enable Quack for fewer re-RAS on the MC\n"); msrnum = GLIU0_ARB; msr = rdmsr(msrnum); msr.hi &= ~ARB_UPPER_DACK_EN_SET; @@ -251,25 +251,25 @@ void cpuRegInit(void) /* GLIU port active enable, limit south pole masters * (AES and PCI) to one outstanding transaction. */ - print_debug(" GLIU port active enable\r\n"); + print_debug(" GLIU port active enable\n"); msrnum = GLIU1_PORT_ACTIVE; msr = rdmsr(msrnum); msr.lo &= ~0x880; wrmsr(msrnum, msr); /* Set the Delay Control in GLCP */ - print_debug("Set the Delay Control in GLCP\r\n"); + print_debug("Set the Delay Control in GLCP\n"); SetDelayControl(); /* Enable RSDC */ - print_debug("Enable RSDC\r\n"); + print_debug("Enable RSDC\n"); msrnum = CPU_AC_SMM_CTL; msr = rdmsr(msrnum); msr.lo |= SMM_INST_EN_SET; wrmsr(msrnum, msr); /* FPU imprecise exceptions bit */ - print_debug("FPU imprecise exceptions bit\r\n"); + print_debug("FPU imprecise exceptions bit\n"); msrnum = CPU_FPU_MSR_MODE; msr = rdmsr(msrnum); msr.lo |= FPU_IE_SET; @@ -277,14 +277,14 @@ void cpuRegInit(void) /* Power Savers (Do after BIST) */ /* Enable Suspend on HLT & PAUSE instructions */ - print_debug("Enable Suspend on HLT & PAUSE instructions\r\n"); + print_debug("Enable Suspend on HLT & PAUSE instructions\n"); msrnum = CPU_XC_CONFIG; msr = rdmsr(msrnum); msr.lo |= XC_CONFIG_SUSP_ON_HLT | XC_CONFIG_SUSP_ON_PAUSE; wrmsr(msrnum, msr); /* Enable SUSP and allow TSC to run in Suspend (keep speed detection happy) */ - print_debug("Enable SUSP and allow TSC to run in Suspend\r\n"); + print_debug("Enable SUSP and allow TSC to run in Suspend\n"); msrnum = CPU_BC_CONF_0; msr = rdmsr(msrnum); msr.lo |= TSC_SUSP_SET | SUSP_EN_SET; @@ -302,10 +302,10 @@ void cpuRegInit(void) #endif /* Setup throttling delays to proper mode if it is ever enabled. */ - print_debug("Setup throttling delays to proper mode\r\n"); + print_debug("Setup throttling delays to proper mode\n"); msrnum = GLCP_TH_OD; msr.hi = 0; msr.lo = 0x00000603C; wrmsr(msrnum, msr); - print_debug("Done cpuRegInit\r\n"); + print_debug("Done cpuRegInit\n"); } diff --git a/src/cpu/amd/quadcore/amd_sibling.c b/src/cpu/amd/quadcore/amd_sibling.c index 4f5c68efd5..48917e3d1d 100644 --- a/src/cpu/amd/quadcore/amd_sibling.c +++ b/src/cpu/amd/quadcore/amd_sibling.c @@ -114,7 +114,7 @@ u32 get_apicid_base(u32 ioapic_num) if((apicid_base+ioapic_num-1)>0xf) { // We need to enable APIC EXT ID - printk(BIOS_SPEW, "if the IO APIC device doesn't support 256 apic id, \r\n you need to set CONFIG_ENABLE_APIC_EXT_ID in MB Option.lb so you can spare 16 id for ioapic\r\n"); + printk(BIOS_SPEW, "if the IO APIC device doesn't support 256 apic id, \n you need to set CONFIG_ENABLE_APIC_EXT_ID in MB Option.lb so you can spare 16 id for ioapic\n"); enable_apic_ext_id(sysconf.nodes); } diff --git a/src/cpu/amd/sc520/raminit.c b/src/cpu/amd/sc520/raminit.c index f52e8fe622..711614a5b8 100644 --- a/src/cpu/amd/sc520/raminit.c +++ b/src/cpu/amd/sc520/raminit.c @@ -248,14 +248,14 @@ udelay(int microseconds) { static void dumpram(void){ - print_err("ctl "); print_err_hex8(*drcctl); print_err("\r\n"); - print_err("mctl "); print_err_hex8(*drcmctl); print_err("\r\n"); - print_err("cfg "); print_err_hex8(*drccfg); print_err("\r\n"); - - print_err("bendadr0 "); print_err_hex8(*drcbendadr); print_err("\r\n"); - print_err("bendadr1 "); print_err_hex8(*drcbendadr); print_err("\r\n"); - print_err("bendadr2 "); print_err_hex8(*drcbendadr); print_err("\r\n"); - print_err("bendadr3"); print_err_hex8(*drcbendadr); print_err("\r\n"); + print_err("ctl "); print_err_hex8(*drcctl); print_err("\n"); + print_err("mctl "); print_err_hex8(*drcmctl); print_err("\n"); + print_err("cfg "); print_err_hex8(*drccfg); print_err("\n"); + + print_err("bendadr0 "); print_err_hex8(*drcbendadr); print_err("\n"); + print_err("bendadr1 "); print_err_hex8(*drcbendadr); print_err("\n"); + print_err("bendadr2 "); print_err_hex8(*drcbendadr); print_err("\n"); + print_err("bendadr3"); print_err_hex8(*drcbendadr); print_err("\n"); } /* there is a lot of silliness in the amd code, and it is @@ -311,11 +311,11 @@ int sizemem(void) print_err("NOP\n"); /* 100? 200? */ udelay(100); - print_err("after sc520_udelay\r\n"); + print_err("after sc520_udelay\n"); /* issue all banks precharge */ *drcctl=0x02; - print_err("set *drcctl to 2 \r\n"); + print_err("set *drcctl to 2 \n"); dummy_write(); print_err("PRE\n"); @@ -334,7 +334,7 @@ int sizemem(void) *drcctl=0x04; for (i=0; i<8; i++) /* refresh 8 times */{ dummy_write(); - print_err("dummy write\r\n"); + print_err("dummy write\n"); } print_err("8 dummy writes\n"); @@ -342,18 +342,18 @@ int sizemem(void) *drcctl=0x00; print_err("normal\n"); - print_err("HI done normal\r\n"); + print_err("HI done normal\n"); print_err("sizemem\n"); for(bank = 3; bank >= 0; bank--) { - print_err("Try to assign to l\r\n"); + print_err("Try to assign to l\n"); *lp = 0xdeadbeef; - print_err("assigned l ... \r\n"); + print_err("assigned l ... \n"); if (*lp != 0xdeadbeef) { print_err(" no memory at bank "); // print_err_hex8(bank); // print_err(" value "); print_err_hex32(*lp); - print_err("\r\n"); + print_err("\n"); // continue; } *drcctl = 2; @@ -362,7 +362,7 @@ int sizemem(void) l = *drcbendadr; l >>= 8; *drcbendadr = l; - print_err("loop around\r\n"); + print_err("loop around\n"); *drcctl = 0; dummy_write(); } @@ -386,11 +386,11 @@ int sizemem(void) print_err("NOP\n"); /* 100? 200? */ //sc520_udelay(100); - print_err("after sc520_udelay\r\n"); + print_err("after sc520_udelay\n"); /* issue all banks precharge */ *drcctl=0x02; - print_err("set *drcctl to 2 \r\n"); + print_err("set *drcctl to 2 \n"); dummy_write(); print_err("PRE\n"); @@ -409,7 +409,7 @@ int sizemem(void) *drcctl=0x04; for (i=0; i<8; i++) /* refresh 8 times */{ dummy_write(); - print_err("dummy write\r\n"); + print_err("dummy write\n"); } print_err("8 dummy writes\n"); @@ -417,7 +417,7 @@ int sizemem(void) *drcctl=0x00; print_err("normal\n"); - print_err("HI done normal\r\n"); + print_err("HI done normal\n"); bank = 3; @@ -558,7 +558,7 @@ print_err("4b\n"); al -= i&3; *drcbendaddr = rows >> al; print_err("computed ending_adr = "); print_err_hex8(ending_adr); - print_err("\r\n"); + print_err("\n"); */ bad_reinit: @@ -592,7 +592,7 @@ bad_reinit: return bank; bad_ram: - print_info("bad ram!\r\n"); + print_info("bad ram!\n"); /* you are here because the read-after-write failed, * in most cases because: no ram in that bank! * set badbank to 1 and go to reinit @@ -600,7 +600,7 @@ bad_ram: ending_adr = 0; goto bad_reinit; while(1) - print_err("DONE NEXTBANK\r\n"); + print_err("DONE NEXTBANK\n"); #endif } @@ -628,27 +628,27 @@ int staticmem(void) /* two autorefreshes */ *drcctl = 4; *zero = 0; - print_debug("one zero out on refresh\r\n"); + print_debug("one zero out on refresh\n"); *zero = 0; - print_debug("two zero out on refresh\r\n"); + print_debug("two zero out on refresh\n"); /* load mode register */ *drcctl = 3; *zero = 0; - print_debug("DONE the load mode reg\r\n"); + print_debug("DONE the load mode reg\n"); /* normal mode */ *drcctl = 0x0; *zero = 0; - print_debug("DONE one last write and then turn on refresh etc\r\n"); + print_debug("DONE one last write and then turn on refresh etc\n"); *drcctl = 0x18; *zero = 0; - print_debug("DONE the normal\r\n"); + print_debug("DONE the normal\n"); *zero = 0xdeadbeef; if (*zero != 0xdeadbeef) - print_debug("NO LUCK\r\n"); + print_debug("NO LUCK\n"); else - print_debug("did a store and load ...\r\n"); + print_debug("did a store and load ...\n"); //print_err_hex32(*zero); - // print_err(" zero is now "); print_err_hex32(*zero); print_err("\r\n"); + // print_err(" zero is now "); print_err_hex32(*zero); print_err("\n"); } diff --git a/src/cpu/intel/microcode/microcode.c b/src/cpu/intel/microcode/microcode.c index a02323dedf..22c3a11503 100644 --- a/src/cpu/intel/microcode/microcode.c +++ b/src/cpu/intel/microcode/microcode.c @@ -82,7 +82,7 @@ void intel_update_microcode(const void *microcode_updates) print_debug_hex32(pf); print_debug(" rev = 0x"); print_debug_hex32(rev); - print_debug("\r\n"); + print_debug("\n"); m = microcode_updates; for(c = microcode_updates; m->hdrver; m = (const struct microcode *)c) { @@ -99,7 +99,7 @@ void intel_update_microcode(const void *microcode_updates) print_debug_hex32(new_rev); print_debug(" from revision "); print_debug_hex32(rev); - print_debug("\r\n"); + print_debug("\n"); break; } if (m->total_size) { diff --git a/src/cpu/intel/model_106cx/cache_as_ram_disable.c b/src/cpu/intel/model_106cx/cache_as_ram_disable.c index fa7ab74bbc..40269ba5b3 100644 --- a/src/cpu/intel/model_106cx/cache_as_ram_disable.c +++ b/src/cpu/intel/model_106cx/cache_as_ram_disable.c @@ -40,10 +40,10 @@ void stage1_main(unsigned long bist) "movl %%esp, %0\n\t" : "=a" (v_esp) ); - printk(BIOS_SPEW, "v_esp=%08x\r\n", v_esp); + printk(BIOS_SPEW, "v_esp=%08x\n", v_esp); } - printk(BIOS_SPEW, "cpu_reset = %08x\r\n",cpu_reset); + printk(BIOS_SPEW, "cpu_reset = %08x\n",cpu_reset); if(cpu_reset == 0) { print_spew("Clearing initial memory region: "); @@ -83,12 +83,12 @@ void stage1_main(unsigned long bist) #ifdef CONFIG_DEACTIVATE_CAR print_debug("Deactivating CAR"); #include CONFIG_DEACTIVATE_CAR_FILE - print_debug(" - Done.\r\n"); + print_debug(" - Done.\n"); #endif /* Copy and execute coreboot_ram */ copy_and_run(new_cpu_reset); /* We will not return */ } - print_debug("sorry. parachute did not open.\r\n"); + print_debug("sorry. parachute did not open.\n"); } |