diff options
Diffstat (limited to 'src/cpu')
| -rw-r--r-- | src/cpu/amd/model_gx2/Kconfig | 2 | ||||
| -rw-r--r-- | src/cpu/amd/model_gx2/Makefile.inc | 1 | ||||
| -rw-r--r-- | src/cpu/amd/model_gx2/vsmsetup.c | 222 | ||||
| -rw-r--r-- | src/cpu/amd/model_lx/Kconfig | 2 | ||||
| -rw-r--r-- | src/cpu/amd/model_lx/Makefile.inc | 1 | ||||
| -rw-r--r-- | src/cpu/amd/model_lx/cache_as_ram.inc | 14 | ||||
| -rw-r--r-- | src/cpu/amd/model_lx/msrinit.c | 53 | ||||
| -rw-r--r-- | src/cpu/amd/model_lx/vsmsetup.c | 764 |
8 files changed, 67 insertions, 992 deletions
diff --git a/src/cpu/amd/model_gx2/Kconfig b/src/cpu/amd/model_gx2/Kconfig index 8aa3420ecb..3eaddca379 100644 --- a/src/cpu/amd/model_gx2/Kconfig +++ b/src/cpu/amd/model_gx2/Kconfig @@ -42,7 +42,7 @@ config GEODE_VSA config VSA_FILE string "AMD Geode GX2 VSA path and filename" - depends on GEODE_VSA + depends on GEODE_VSA && CPU_AMD_GX2 default "gpl_vsa_gx_102.bin" help The path and filename of the file to use as VSA. diff --git a/src/cpu/amd/model_gx2/Makefile.inc b/src/cpu/amd/model_gx2/Makefile.inc index cdc6846898..205ddae3f3 100644 --- a/src/cpu/amd/model_gx2/Makefile.inc +++ b/src/cpu/amd/model_gx2/Makefile.inc @@ -4,4 +4,3 @@ subdirs-y += ../../x86/cache subdirs-y += ../../x86/smm driver-y += model_gx2_init.o obj-y += cpubug.o -obj-y += vsmsetup.o diff --git a/src/cpu/amd/model_gx2/vsmsetup.c b/src/cpu/amd/model_gx2/vsmsetup.c deleted file mode 100644 index a284a9c726..0000000000 --- a/src/cpu/amd/model_gx2/vsmsetup.c +++ /dev/null @@ -1,222 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2000 Erik Arjan Hendriks - * Copyright (C) 2000 Scyld Computing Corporation - * Copyright (C) 2001 University of California. LA-CC Number 01-67. - * Copyright (C) 2005 Nick.Barker9@btinternet.com - * Copyright (C) 2007 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA. - * - * LA-CC is the Los Alamos Control and Compliance Number, see also: - * http://supply.lanl.gov/property/customs/eximguide/default.shtml - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <string.h> -#include <cpu/cpu.h> -#include <cpu/x86/lapic.h> -#include <cpu/x86/cache.h> -#include <arch/io.h> -#include <cbfs.h> - -void do_vsmbios(void); - -#define VSA2_BUFFER 0x60000 -#define VSA2_ENTRY_POINT 0x60020 -#define VSA2_SIGNATURE 0x56534132 // 'VSA2' returned in EAX -#define SIGNATURE 0x03 -/** - * TODO. - * - * The address arguments to this function are PHYSICAL ADDRESSES! - * - * @param smm TODO. - * @param sysm TODO. - */ -static void real_mode_switch_call_vsm(unsigned long smm, unsigned long sysm) -{ - u16 entryHi = (VSA2_ENTRY_POINT & 0xffff0000) >> 4; - u16 entryLo = (VSA2_ENTRY_POINT & 0xffff); - - __asm__ __volatile__( - /* Paranoia -- does ecx get saved? not sure. This is - * the easiest safe thing to do. - */ - " pushal \n" - /* Save the stack. */ - " mov %%esp, __stack \n" - " jmp 1f \n" - "__stack: .long 0 \n" - "1:\n" - /* Get devfn into %%ecx. */ - " movl %%esp, %%ebp \n" - /* Get the smm and sysm args into ecx and edx. */ - " movl %0, %%ecx \n" - " movl %1, %%edx \n" - /* Load 'our' gdt. */ - " lgdt %%cs:__mygdtaddr \n" - /* This configures CS properly for real mode. */ - " ljmp $0x28, $__rms_16bit\n" - "__rms_16bit: \n" - " .code16 \n" - /* 16 bit code from here on... */ - /* Load the segment registers with properly configured segment - * descriptors. They will retain these configurations (limits, - * writability, etc.) once protected mode is turned off. - */ - " mov $0x30, %%ax \n" - " mov %%ax, %%ds \n" - " mov %%ax, %%es \n" - " mov %%ax, %%fs \n" - " mov %%ax, %%gs \n" - " mov %%ax, %%ss \n" - /* Turn off protection (bit 0 in CR0). */ - " movl %%cr0, %%eax \n" - " andl $0xFFFFFFFE, %%eax \n" - " movl %%eax, %%cr0 \n" - /* Now really going into real mode. */ - " ljmp $0, $__rms_real\n" - "__rms_real: \n" - - /* Put the stack at the end of page zero. - * That way we can easily share it between real and protected, - * since the 16-bit ESP at segment 0 will work for any case. - */ - - /* Setup a stack. */ - " mov $0x0, %%ax \n" - " mov %%ax, %%ss \n" - " movl $0x1000, %%eax \n" - " movl %%eax, %%esp \n" - /* Dump zeros in the other segregs. */ - " mov %%ax, %%es \n" - /* FIXME: Big real mode for gs, fs? */ - " mov %%ax, %%fs \n" - " mov %%ax, %%gs \n" - " mov $0x40, %%ax \n" - " mov %%ax, %%ds \n" - /* " mov %%cx, %%ax \n" */ - " movl %0, %%ecx \n" - " movl %1, %%edx \n" - /* Call the VSA2 entry point address. */ - " lcall %2, %3\n" - /* If we got here, just about done. - * Need to get back to protected mode. - */ - " movl %%cr0, %%eax \n" - " orl $0x0000001, %%eax\n" /* PE = 1 */ - " movl %%eax, %%cr0 \n" - /* Now that we are in protected mode, - * jump to a 32 bit code segment. - */ - " data32 ljmp $0x10, $vsmrestart\n" - "vsmrestart:\n" - " .code32\n" - " movw $0x18, %%ax \n" - " mov %%ax, %%ds \n" - " mov %%ax, %%es \n" - " mov %%ax, %%fs \n" - " mov %%ax, %%gs \n" - " mov %%ax, %%ss \n" - /* Restore proper gdt. */ - " lgdt %%cs:gdtarg \n" - ".globl vsm_exit \n" - "vsm_exit: \n" - " mov __stack, %%esp \n" - " popal \n":: - "g" (smm), "g"(sysm), "g"(entryHi), "g"(entryLo) - ); -} - -__asm__(".text\n" "real_mode_switch_end:\n"); -extern char real_mode_switch_end[]; - -/* andrei: Some VSA virtual register helpers: raw read and MSR read. */ - -static u32 VSA_vrRead(u16 classIndex) -{ - unsigned eax, ebx, ecx, edx; - asm volatile ( - "movw $0x0AC1C, %%dx \n" - "orl $0x0FC530000, %%eax \n" - "outl %%eax, %%dx \n" - "addb $2, %%dl \n" - "inw %%dx, %%ax \n" - : "=a" (eax), "=b"(ebx), "=c"(ecx), "=d"(edx) - : "a"(classIndex) - ); - - return eax; -} - -static u32 VSA_msrRead(u32 msrAddr) -{ - unsigned eax, ebx, ecx, edx; - asm volatile ( - "movw $0x0AC1C, %%dx \n" - "movl $0x0FC530007, %%eax \n" - "outl %%eax, %%dx \n" - "addb $2, %%dl \n" - "inw %%dx, %%ax \n" - : "=a" (eax), "=b"(ebx), "=c"(ecx), "=d"(edx) - : "c"(msrAddr) - ); - - return eax; -} - -void do_vsmbios(void) -{ - unsigned char *buf; - int i; - - printk(BIOS_ERR, "do_vsmbios\n"); - /* Clear VSM BIOS data area. */ - for (i = 0x400; i < 0x500; i++) - *(volatile unsigned char *)i = 0; - if ((unsigned int)cbfs_load_stage("vsa") != VSA2_ENTRY_POINT) { - printk(BIOS_ERR, "do_vsmbios: Failed to load VSA.\n"); - } - buf = VSA2_BUFFER; - - printk(BIOS_DEBUG, "buf[0x20] signature is %x:%x:%x:%x\n", - buf[0x20], buf[0x21], buf[0x22], buf[0x23]); - /* Check for POST code at start of vsainit.bin. If you don't see it, - * don't bother. - */ - if ((buf[0x20] != 0xb0) || (buf[0x21] != 0x10) || - (buf[0x22] != 0xe6) || (buf[0x23] != 0x80)) { - die("FATAL: no vsainit.bin signature, skipping!\n"); - } - - /* ecx gets smm, edx gets sysm. */ - printk(BIOS_ERR, "Call real_mode_switch_call_vsm\n"); -// real_mode_switch_call_vsm(MSR_GLIU0_SMM, MSR_GLIU0_SYSMEM); - - /* Restart Timer 1. */ - outb(0x56, 0x43); - outb(0x12, 0x41); - - /* Check that VSA is running OK. */ - if (VSA_vrRead(SIGNATURE) == VSA2_SIGNATURE) - printk(BIOS_DEBUG, "do_vsmbios: VSA2 VR signature verified\n"); - else - die("FATAL: VSA2 VR signature not valid, install failed!\n"); -} - diff --git a/src/cpu/amd/model_lx/Kconfig b/src/cpu/amd/model_lx/Kconfig index 769c600a46..66e20ec45e 100644 --- a/src/cpu/amd/model_lx/Kconfig +++ b/src/cpu/amd/model_lx/Kconfig @@ -23,7 +23,7 @@ config GEODE_VSA config VSA_FILE string "AMD Geode LX VSA path and filename" - depends on GEODE_VSA + depends on GEODE_VSA && CPU_AMD_LX default "gpl_vsa_lx_102.bin" help The path and filename of the file to use as VSA. diff --git a/src/cpu/amd/model_lx/Makefile.inc b/src/cpu/amd/model_lx/Makefile.inc index 66dcd31ffe..4752378d41 100644 --- a/src/cpu/amd/model_lx/Makefile.inc +++ b/src/cpu/amd/model_lx/Makefile.inc @@ -5,6 +5,5 @@ subdirs-y += ../../x86/smm driver-y += model_lx_init.o obj-y += cpubug.o -obj-y += vsmsetup.o cpu_incs += $(src)/cpu/amd/model_lx/cache_as_ram.inc diff --git a/src/cpu/amd/model_lx/cache_as_ram.inc b/src/cpu/amd/model_lx/cache_as_ram.inc index 096a96155d..f776a7a727 100644 --- a/src/cpu/amd/model_lx/cache_as_ram.inc +++ b/src/cpu/amd/model_lx/cache_as_ram.inc @@ -34,6 +34,8 @@ /** /***************************************************************************/ DCacheSetup: + /* Save the BIST result */ + movl %eax, %ebx invd /* set cache properties */ @@ -173,9 +175,17 @@ DCacheSetupBad: hlt /* issues */ jmp DCacheSetupBad DCacheSetupGood: - /* Go do early init and memory setup */ - call cache_as_ram_main + + /* Restore the BIST result */ + movl %ebx, %eax + movl %esp, %ebp + pushl %eax + + post_code(0x23) + + /* Call romstage.c main function */ + call main done_cache_as_ram_main: /* We now run over the stack-in-cache, copying it back to itself to invalidate the cache */ diff --git a/src/cpu/amd/model_lx/msrinit.c b/src/cpu/amd/model_lx/msrinit.c new file mode 100644 index 0000000000..2ed7c94f71 --- /dev/null +++ b/src/cpu/amd/model_lx/msrinit.c @@ -0,0 +1,53 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +struct msrinit { + u32 msrnum; + msr_t msr; +}; + +static const struct msrinit msr_table[] = +{ + {CPU_RCONF_DEFAULT, {.hi = 0x24fffc02,.lo = 0x1000A000}}, /* Setup access to cache under 1MB. + * Rom Properties: Write Serialize, WriteProtect. + * RomBase: 0xFFFC0 + * SysTop to RomBase Properties: Write Serialize, Cache Disable. + * SysTop: 0x000A0 + * System Memory Properties: (Write Back) */ + {CPU_RCONF_A0_BF, {.hi = 0x00000000,.lo = 0x00000000}}, /* 0xA0000-0xBFFFF : (Write Back) */ + {CPU_RCONF_C0_DF, {.hi = 0x00000000,.lo = 0x00000000}}, /* 0xC0000-0xDFFFF : (Write Back) */ + {CPU_RCONF_E0_FF, {.hi = 0x00000000,.lo = 0x00000000}}, /* 0xE0000-0xFFFFF : (Write Back) */ + + /* Setup access to memory under 1MB. Note: VGA hole at 0xA0000-0xBFFFF */ + {MSR_GLIU0_BASE1, {.hi = 0x20000000,.lo = 0x000fff80}}, // 0x00000-0x7FFFF + {MSR_GLIU0_BASE2, {.hi = 0x20000000,.lo = 0x080fffe0}}, // 0x80000-0x9FFFF + {MSR_GLIU0_SHADOW, {.hi = 0x2000FFFF,.lo = 0xFFFF0003}}, // 0xC0000-0xFFFFF + {MSR_GLIU1_BASE1, {.hi = 0x20000000,.lo = 0x000fff80}}, // 0x00000-0x7FFFF + {MSR_GLIU1_BASE2, {.hi = 0x20000000,.lo = 0x080fffe0}}, // 0x80000-0x9FFFF + {MSR_GLIU1_SHADOW, {.hi = 0x2000FFFF,.lo = 0xFFFF0003}}, // 0xC0000-0xFFFFF +}; + +static void msr_init(void) +{ + int i; + for (i = 0; i < ARRAY_SIZE(msr_table); i++) + wrmsr(msr_table[i].msrnum, msr_table[i].msr); +} + + diff --git a/src/cpu/amd/model_lx/vsmsetup.c b/src/cpu/amd/model_lx/vsmsetup.c deleted file mode 100644 index d2a3c58344..0000000000 --- a/src/cpu/amd/model_lx/vsmsetup.c +++ /dev/null @@ -1,764 +0,0 @@ -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <device/pci_ops.h> -#undef __KERNEL__ -#include <arch/io.h> -#include <string.h> -#include <cpu/amd/lxdef.h> -#include <cpu/amd/vr.h> -#include <cbfs.h> - -#define VSA2_BUFFER 0x60000 -#define VSA2_ENTRY_POINT 0x60020 - -/* vsmsetup.c derived from vgabios.c. Derived from: */ - -/*------------------------------------------------------------ -*- C -*- - * 2 Kernel Monte a.k.a. Linux loading Linux on x86 - * - * Erik Arjan Hendriks <hendriks@lanl.gov> - * - * This version is a derivative of the original two kernel monte - * which is (C) 2000 Scyld. - * - * Copyright (C) 2000 Scyld Computing Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA. - * - * Portions related to the alpha architecture are: - * - * Copyright(C) 2001 University of California. LA-CC Number 01-67. - * This software has been authored by an employee or employees of the - * University of California, operator of the Los Alamos National - * Laboratory under Contract No. W-7405-ENG-36 with the U.S. - * Department of Energy. The U.S. Government has rights to use, - * reproduce, and distribute this software. If the software is - * modified to produce derivative works, such modified software should - * be clearly marked, so as not to confuse it with the version - * available from LANL. - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by - * reference to http://www.gnu.org/licenses/gpl.html. - * - * This software is provided by the author(s) "as is" and any express - * or implied warranties, including, but not limited to, the implied - * warranties of merchantability and fitness for a particular purpose - * are disclaimed. In no event shall the author(s) be liable for any - * direct, indirect, incidental, special, exemplary, or consequential - * damages (including, but not limited to, procurement of substitute - * goods or services; loss of use, data, or profits; or business - * interruption) however caused and on any theory of liability, - * whether in contract, strict liability, or tort (including - * negligence or otherwise) arising in any way out of the use of this - * software, even if advised of the possibility of such damage. - * - * $Id: vsmsetup.c,v 1.8 2006/09/08 12:47:57 andrei Exp $ - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - *--------------------------------------------------------------------*/ - -/* Modified to be a self sufficient plug in so that it can be used - without reliance on other parts of core coreboot - (C) 2005 Nick.Barker9@btinternet.com - - Used initially for epia-m where there are problems getting the bios - emulator to successfully run this bios. -*/ - -/* Declare a temporary global descriptor table - necessary because the - Core part of the bios no longer sets up any 16 bit segments */ -__asm__( - /* pointer to original gdt */ - "gdtarg: \n" - " .word gdt_limit \n" - " .long gdt \n" - /* compute the table limit */ - "__mygdt_limit = __mygdt_end - __mygdt - 1 \n" - "__mygdtaddr: \n" - " .word __mygdt_limit \n" - " .long __mygdt \n" - "__mygdt: \n" - /* selgdt 0, unused */ - " .word 0x0000, 0x0000 \n" - " .byte 0x00, 0x00, 0x00, 0x00 \n" - /* selgdt 8, unused */ - " .word 0x0000, 0x0000 \n" - " .byte 0x00, 0x00, 0x00, 0x00 \n" - /* selgdt 0x10, flat code segment */ - " .word 0xffff, 0x0000 \n" - " .byte 0x00, 0x9b, 0xcf, 0x00 \n" - /* selgdt 0x18, flat data segment */ - " .word 0xffff, 0x0000 \n" - " .byte 0x00, 0x93, 0xcf, 0x00 \n" - /* selgdt 0x20, unused */ - " .word 0x0000, 0x0000 \n" - " .byte 0x00, 0x00, 0x00, 0x00 \n" - /* selgdt 0x28 16-bit 64k code at 0x00000000 */ - " .word 0xffff, 0x0000 \n" - " .byte 0, 0x9a, 0, 0 \n" - /* selgdt 0x30 16-bit 64k data at 0x00000000 */ - " .word 0xffff, 0x0000 \n" - " .byte 0, 0x92, 0, 0 \n" - "__mygdt_end: \n" -); - -/* Declare a pointer to where our idt is going to be i.e. at mem zero */ -__asm__( - "__myidt: \n" - /* 16-bit limit */ - " .word 1023 \n" - /* 24-bit base */ - " .long 0 \n" - " .word 0 \n" -); - -/* The address arguments to this function are PHYSICAL ADDRESSES */ -static void real_mode_switch_call_vsm(unsigned long smm, unsigned long sysm) -{ - uint16_t entryHi = (VSA2_ENTRY_POINT & 0xffff0000) >> 4; - uint16_t entryLo = (VSA2_ENTRY_POINT & 0xffff); - - __asm__ __volatile__( - // paranoia -- does ecx get saved? not sure. This is - // the easiest safe thing to do. - " pushal \n" - /* save the stack */ - " mov %%esp, __stack \n" - " jmp 1f \n" - "__stack: .long 0 \n" - "1:\n" - /* get devfn into %%ecx */ - " movl %%esp, %%ebp \n" -#if 0 - /* I'm not happy about that pushal followed by esp-relative - * references. Just do hard-codes for now - */ - " movl 8(%%ebp), %%ecx \n" - " movl 12(%%ebp), %%edx \n" -#endif - " movl %0, %%ecx \n" - " movl %1, %%edx \n" - /* load 'our' gdt */ - " lgdt %%cs:__mygdtaddr \n" - /* This configures CS properly for real mode. */ - " ljmp $0x28, $__rms_16bit\n" - "__rms_16bit: \n" - " .code16 \n" - /* 16 bit code from here on... */ - /* Load the segment registers w/ properly configured segment - * descriptors. They will retain these configurations (limits, - * writability, etc.) once protected mode is turned off. */ - " mov $0x30, %%ax \n" - " mov %%ax, %%ds \n" - " mov %%ax, %%es \n" - " mov %%ax, %%fs \n" - " mov %%ax, %%gs \n" - " mov %%ax, %%ss \n" - /* Turn off protection (bit 0 in CR0) */ - " movl %%cr0, %%eax \n" - " andl $0xFFFFFFFE, %%eax \n" - " movl %%eax, %%cr0 \n" - /* Now really going into real mode */ - " ljmp $0, $__rms_real\n" - "__rms_real: \n" - - /* put the stack at the end of page zero. - * that way we can easily share it between real and protected, - * since the 16-bit ESP at segment 0 will work for any case. - */ - - /* Setup a stack */ - " mov $0x0, %%ax \n" - " mov %%ax, %%ss \n" - " movl $0x1000, %%eax \n" - " movl %%eax, %%esp \n" - /* Load our 16 it idt */ - " xor %%ax, %%ax \n" - " mov %%ax, %%ds \n" - " lidt __myidt \n" - /* Dump zeros in the other segregs */ - " mov %%ax, %%es \n" - /* FixMe: Big real mode for gs, fs? */ - " mov %%ax, %%fs \n" - " mov %%ax, %%gs \n" - " mov $0x40, %%ax \n" - " mov %%ax, %%ds \n" - //" mov %%cx, %%ax \n" - " movl %0, %%ecx \n" - " movl %1, %%edx \n" - /* call the VSA2 entry point address */ - " lcall %2, %3\n" - /* if we got here, just about done. - * Need to get back to protected mode */ - " movl %%cr0, %%eax \n" - " orl $0x0000001, %%eax\n" /* PE = 1 */ - " movl %%eax, %%cr0 \n" - /* Now that we are in protected mode jump to a 32 bit code segment. */ - " data32 ljmp $0x10, $vsmrestart\n" - "vsmrestart:\n" - " .code32\n" - " movw $0x18, %%ax \n" - " mov %%ax, %%ds \n" - " mov %%ax, %%es \n" - " mov %%ax, %%fs \n" - " mov %%ax, %%gs \n" - " mov %%ax, %%ss \n" - /* restore proper gdt and idt */ - " lgdt %%cs:gdtarg \n" - " lidt idtarg \n" - ".globl vsm_exit \n" - "vsm_exit: \n" - " mov __stack, %%esp \n" - " popal \n":: - "g" (smm), "g"(sysm), "g"(entryHi), "g"(entryLo) - ); -} - -__asm__(".text\n" "real_mode_switch_end:\n"); -extern char real_mode_switch_end[]; - -// andrei: some VSA virtual register helpers: raw read and MSR read - -uint32_t VSA_vrRead(uint16_t classIndex) -{ - unsigned eax, ebx, ecx, edx; - asm volatile ( - "movw $0x0AC1C, %%dx \n" - "orl $0x0FC530000, %%eax \n" - "outl %%eax, %%dx \n" - "addb $2, %%dl \n" - "inw %%dx, %%ax \n" - : "=a" (eax), "=b"(ebx), "=c"(ecx), "=d"(edx) - : "a"(classIndex) - ); - - return eax; -} - -uint32_t VSA_msrRead(uint32_t msrAddr) -{ - unsigned eax, ebx, ecx, edx; - asm volatile ( - "movw $0x0AC1C, %%dx \n" - "movl $0x0FC530007, %%eax \n" - "outl %%eax, %%dx \n" - "addb $2, %%dl \n" - "inw %%dx, %%ax \n" - : "=a" (eax), "=b"(ebx), "=c"(ecx), "=d"(edx) - : "c"(msrAddr) - ); - - return eax; -} - -void do_vsmbios(void) -{ - unsigned char *buf; - int i; - - printk(BIOS_ERR, "do_vsmbios\n"); - /* clear vsm bios data area */ - for (i = 0x400; i < 0x500; i++) { - *(volatile unsigned char *)i = 0; - } - - /* declare rom address here - keep any config data out of the way - * of core LXB stuff */ - - /* this is the base of rom on the LX at present. At some point, this has to be - * much better parameterized - */ - - if ((unsigned int)cbfs_load_stage("vsa") != VSA2_ENTRY_POINT) { - printk(BIOS_ERR, "do_vsmbios: Failed to load VSA.\n"); - } - buf = (unsigned char *)VSA2_BUFFER; - printk(BIOS_DEBUG, "buf %p *buf %d buf[256k] %d\n", - buf, buf[0], buf[SMM_SIZE * 1024]); - printk(BIOS_DEBUG, "buf[0x20] signature is %x:%x:%x:%x\n", - buf[0x20], buf[0x21], buf[0x22], buf[0x23]); - /* check for post code at start of vsainit.bin. If you don't see it, - don't bother. */ - if ((buf[0x20] != 0xb0) || (buf[0x21] != 0x10) || - (buf[0x22] != 0xe6) || (buf[0x23] != 0x80)) { - printk(BIOS_ERR, "do_vsmbios: no vsainit.bin signature, skipping!\n"); - return; - } - - /* ecx gets smm, edx gets sysm */ - printk(BIOS_ERR, "Call real_mode_switch_call_vsm\n"); - real_mode_switch_call_vsm(MSR_GLIU0_SMM, MSR_GLIU0_SYSMEM); - - /* restart timer 1 */ - outb(0x56, 0x43); - outb(0x12, 0x41); - - // check that VSA is running OK - if (VSA_vrRead(SIGNATURE) == VSA2_SIGNATURE) - printk(BIOS_DEBUG, "do_vsmbios: VSA2 VR signature verified\n"); - else - printk(BIOS_ERR, "do_vsmbios: VSA2 VR signature not valid, install failed!\n"); -} - -// we had hoped to avoid this. -// this is a stub IDT only. It's main purpose is to ignore calls -// to the BIOS. -// no longer. Dammit. We have to respond to these. -struct realidt { - unsigned short offset, cs; -}; - -// from a handy writeup that andrey found. - -// handler. -// There are some assumptions we can make here. -// First, the Top Of Stack (TOS) is located on the top of page zero. -// we can share this stack between real and protected mode. -// that simplifies a lot of things ... -// we'll just push all the registers on the stack as longwords, -// and pop to protected mode. -// second, since this only ever runs as part of coreboot, -// we know all the segment register values -- so we don't save any. -// keep the handler that calls things small. It can do a call to -// more complex code in coreboot itself. This helps a lot as we don't -// have to do address fixup in this little stub, and calls are absolute -// so the handler is relocatable. -void handler(void) -{ - __asm__ __volatile__( - " .code16 \n" - "idthandle: \n" - " pushal \n" - " movb $0, %al \n" - " ljmp $0, $callbiosint16\n" - "end_idthandle: \n" - " .code32 \n" - ); -} - -void debughandler(void) -{ - __asm__ __volatile__( - " .code16 \n" - "debughandle: \n" - " pushw %cx \n" - " movw $250, %cx \n" - "dbh1: \n" - " loop dbh1 \n" - " popw %cx \n" - " iret \n" - "end_debughandle: \n" - ".code32 \n" - ); -} - -// Calling conventions. The first C function is called with this stuff -// on the stack. They look like value parameters, but note that if you -// modify them they will go back to the INTx function modified. -// the C function will call the biosint function with these as -// REFERENCE parameters. In this way, we can easily get -// returns back to the INTx caller (i.e. vgabios) -void callbiosint(void) -{ - __asm__ __volatile__( - " .code16 \n" - "callbiosint16: \n" - " push %ds \n" - " push %es \n" - " push %fs \n" - " push %gs \n" - // clean up the int #. To save space we put it in the lower - // byte. But the top 24 bits are junk. - " andl $0xff, %eax\n" - // this push does two things: - // - put the INT # on the stack as a parameter - // - provides us with a temp for the %cr0 mods. - " pushl %eax \n" - " movb $0xbb, %al\n" - " outb %al, $0x80\n" - " movl %cr0, %eax\n" - " orl $0x00000001, %eax\n" /* PE = 1 */ - " movl %eax, %cr0\n" - /* Now that we are in protected mode jump to a 32 bit code segment. */ - " data32 ljmp $0x10, $biosprotect\n" - "biosprotect: \n" - " .code32 \n" - " movw $0x18, %ax\n" - " mov %ax, %ds\n" - " mov %ax, %es\n" - " mov %ax, %fs\n" - " mov %ax, %gs\n" - " mov %ax, %ss\n" - " lidt idtarg \n" - " call biosint \n" - // back to real mode ... - " ljmp $0x28, $__rms_16bit2\n" - "__rms_16bit2: \n" - " .code16 \n" - /* 16 bit code from here on... */ - /* Load the segment registers w/ properly configured segment - * descriptors. They will retain these configurations (limits, - * writability, etc.) once protected mode is turned off. */ - " mov $0x30, %ax\n" - " mov %ax, %ds\n" - " mov %ax, %es\n" - " mov %ax, %fs\n" - " mov %ax, %gs\n" - " mov %ax, %ss\n" - /* Turn off protection (bit 0 in CR0) */ - " movl %cr0, %eax \n" - " andl $0xFFFFFFFE, %eax \n" - " movl %eax, %cr0 \n" - /* Now really going into real mode */ - " ljmp $0, $__rms_real2 \n" - "__rms_real2: \n" - /* Setup a stack - * FixME: where is esp? */ - /* no need for a fix here. The esp is shared from 32-bit and 16-bit mode. - * you have to hack on the ss, but the esp remains the same across - * modes. - */ - " mov $0x0, %ax \n" - " mov %ax, %ss \n" - /* debugging for RGM */ - " mov $0x11, %al \n" - " outb %al, $0x80 \n" - /* Load our 16 bit idt */ - " xor %ax, %ax \n" - " mov %ax, %ds \n" - " lidt __myidt \n" - /* Dump zeros in the other segregs */ - " mov %ax, %es \n" - " mov %ax, %fs \n" - " mov %ax, %gs \n" - " mov $0x40, %ax \n" - " mov %ax, %ds \n" - /* pop the INT # that you pushed earlier */ - " popl %eax \n" - " pop %gs \n" - " pop %fs \n" - " pop %es \n" - " pop %ds \n" - " popal \n" - " iret \n" - " .code32 \n" - ); -} - -enum { - PCIBIOS = 0x1a, - MEMSIZE = 0x12 -}; - -int pcibios(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp, - unsigned long *pesp, unsigned long *pebx, unsigned long *pedx, - unsigned long *pecx, unsigned long *peax, unsigned long *pflags); - -int handleint21(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp, - unsigned long *pesp, unsigned long *pebx, unsigned long *pedx, - unsigned long *pecx, unsigned long *peax, - unsigned long *pflags); - -int biosint(unsigned long intnumber, - unsigned long gsfs, unsigned long dses, - unsigned long edi, unsigned long esi, - unsigned long ebp, unsigned long esp, - unsigned long ebx, unsigned long edx, - unsigned long ecx, unsigned long eax, - unsigned long cs_ip, unsigned short stackflags) -{ - unsigned long ip; - unsigned long cs; - unsigned long flags; - int ret = -1; - - ip = cs_ip & 0xffff; - cs = cs_ip >> 16; - flags = stackflags; - - printk(BIOS_DEBUG, "biosint: INT# 0x%lx\n", intnumber); - printk(BIOS_DEBUG, "biosint: eax 0x%lx ebx 0x%lx ecx 0x%lx edx 0x%lx\n", - eax, ebx, ecx, edx); - printk(BIOS_DEBUG, "biosint: ebp 0x%lx esp 0x%lx edi 0x%lx esi 0x%lx\n", - ebp, esp, edi, esi); - printk(BIOS_DEBUG, "biosint: ip 0x%x cs 0x%x flags 0x%x\n", - (u32)ip, (u32)cs, (u32)flags); - printk(BIOS_DEBUG, "biosint: gs 0x%x fs 0x%x ds 0x%x es 0x%x\n", - (u16)(gsfs >> 16), (u16)(gsfs & 0xffff), (u16)(dses >> 16), (u16)(dses & 0xffff)); - - // cases in a good compiler are just as good as your own tables. - switch (intnumber) { - case 0 ... 15: - // These are not BIOS service, but the CPU-generated exceptions - printk(BIOS_INFO, "biosint: Oops, exception 0x%x\n", (u32)intnumber); - if (esp < 0x1000) { - printk(BIOS_DEBUG, "Stack contents: "); - while (esp < 0x1000) { - printk(BIOS_DEBUG, "0x%04x ", *(unsigned short *)esp); - esp += 2; - } - printk(BIOS_DEBUG, "\n"); - } - printk(BIOS_DEBUG, "biosint: Bailing out ... not now\n"); - // "longjmp" - //vga_exit(); - break; - - case PCIBIOS: - ret = pcibios(&edi, &esi, &ebp, &esp, - &ebx, &edx, &ecx, &eax, &flags); - break; - case MEMSIZE: - // who cares. - eax = 128 * 1024; - ret = 0; - break; - case 0x15: - ret = handleint21(&edi, &esi, &ebp, &esp, - &ebx, &edx, &ecx, &eax, &flags); - break; - default: - printk(BIOS_INFO, "BIOSINT: Unsupported int #0x%x\n", (u32)intnumber); - break; - } - if (ret) - flags |= 1; // carry flags - else - flags &= ~1; - stackflags = flags; - return ret; -} - -void setup_realmode_idt(void) -{ - extern unsigned char idthandle, end_idthandle; - extern unsigned char debughandle, end_debughandle; - - int i; - struct realidt *idts = (struct realidt *)0; - int codesize = &end_idthandle - &idthandle; - unsigned char *intbyte, *codeptr; - - // for each int, we create a customized little handler - // that just pushes %ax, puts the int # in %al, - // then calls the common interrupt handler. - // this necessitated because intel didn't know much about - // architecture when they did the 8086 (it shows) - // (hmm do they know anymore even now :-) - // obviously you can see I don't really care about memory - // efficiency. If I did I would probe back through the stack - // and get it that way. But that's really disgusting. - for (i = 0; i < 256; i++) { - idts[i].cs = 0; - codeptr = (unsigned char *)4096 + i * codesize; - idts[i].offset = (unsigned)codeptr; - memcpy(codeptr, &idthandle, codesize); - intbyte = codeptr + 3; - *intbyte = i; - } - - // fixed entry points - - // VGA BIOSes tend to hardcode f000:f065 as the previous handler of - // int10. - // calling convention here is the same as INTs, we can reuse - // the int entry code. - codeptr = (unsigned char *)0xff065; - memcpy(codeptr, &idthandle, codesize); - intbyte = codeptr + 3; - *intbyte = 0x42; /* int42 is the relocated int10 */ - - /* debug handler - useful to set a programmable delay between instructions if the - TF bit is set upon call to real mode */ - idts[1].cs = 0; - idts[1].offset = 16384; - memcpy((void *)16384, &debughandle, &end_debughandle - &debughandle); -} - -enum { - CHECK = 0xb001, - FINDDEV = 0xb102, - READCONFBYTE = 0xb108, - READCONFWORD = 0xb109, - READCONFDWORD = 0xb10a, - WRITECONFBYTE = 0xb10b, - WRITECONFWORD = 0xb10c, - WRITECONFDWORD = 0xb10d -}; - -// errors go in AH. Just set these up so that word assigns -// will work. KISS. -enum { - PCIBIOS_NODEV = 0x8600, - PCIBIOS_BADREG = 0x8700 -}; - -int -pcibios(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp, - unsigned long *pesp, unsigned long *pebx, unsigned long *pedx, - unsigned long *pecx, unsigned long *peax, unsigned long *pflags) -{ - unsigned short func = (unsigned short)*peax; - int retval = 0; - unsigned short devid, vendorid, devfn; - short devindex; /* Use short to get rid of gabage in upper half of 32-bit register */ - unsigned char bus; - device_t dev; - - switch (func) { - case CHECK: - *pedx = 0x4350; - *pecx = 0x2049; - retval = 0; - break; - case FINDDEV: - { - devid = *pecx; - vendorid = *pedx; - devindex = *pesi; - dev = 0; - while ((dev = dev_find_device(vendorid, devid, dev))) { - if (devindex <= 0) - break; - devindex--; - } - if (dev) { - unsigned short busdevfn; - *peax = 0; - // busnum is an unsigned char; - // devfn is an int, so we mask it off. - busdevfn = (dev->bus->secondary << 8) - | (dev->path.pci.devfn & 0xff); - printk(BIOS_DEBUG, "0x%x: return 0x%x\n", func, - busdevfn); - *pebx = busdevfn; - retval = 0; - } else { - *peax = PCIBIOS_NODEV; - retval = -1; - } - } - break; - case READCONFDWORD: - case READCONFWORD: - case READCONFBYTE: - case WRITECONFDWORD: - case WRITECONFWORD: - case WRITECONFBYTE: - { - unsigned long dword; - unsigned short word; - unsigned char byte; - unsigned char reg; - - devfn = *pebx & 0xff; - bus = *pebx >> 8; - reg = *pedi; - dev = dev_find_slot(bus, devfn); - if (!dev) { - printk(BIOS_DEBUG, "0x%x: BAD DEVICE bus %d devfn 0x%x\n", - func, bus, devfn); - // idiots. the pcibios guys assumed you'd never pass a bad bus/devfn! - *peax = PCIBIOS_BADREG; - retval = -1; - } - switch (func) { - case READCONFBYTE: - byte = pci_read_config8(dev, reg); - *pecx = byte; - break; - case READCONFWORD: - word = pci_read_config16(dev, reg); - *pecx = word; - break; - case READCONFDWORD: - dword = pci_read_config32(dev, reg); - *pecx = dword; - break; - case WRITECONFBYTE: - byte = *pecx; - pci_write_config8(dev, reg, byte); - break; - case WRITECONFWORD: - word = *pecx; - pci_write_config16(dev, reg, word); - break; - case WRITECONFDWORD: - dword = *pecx; - pci_write_config32(dev, reg, dword); - break; - } - - if (retval) - retval = PCIBIOS_BADREG; - printk(BIOS_DEBUG, "0x%x: bus %d devfn 0x%x reg 0x%x val 0x%lx\n", - func, bus, devfn, reg, *pecx); - *peax = 0; - retval = 0; - } - break; - default: - printk(BIOS_ERR, "UNSUPPORTED PCIBIOS FUNCTION 0x%x\n", func); - break; - } - - return retval; -} - -int handleint21(unsigned long *edi, unsigned long *esi, unsigned long *ebp, - unsigned long *esp, unsigned long *ebx, unsigned long *edx, - unsigned long *ecx, unsigned long *eax, unsigned long *flags) -{ - int res = -1; - printk(BIOS_DEBUG, "handleint21, eax 0x%x\n", (u32)*eax); - switch (*eax & 0xffff) { - case 0x5f19: - break; - case 0x5f18: - *eax = 0x5f; - *ebx = 0x545; // MCLK = 133, 32M frame buffer, 256 M main memory - *ecx = 0x060; - res = 0; - break; - case 0x5f00: - *eax = 0x8600; - break; - case 0x5f01: - *eax = 0x5f; - *ecx = (*ecx & 0xffffff00) | 2; // panel type = 2 = 1024 * 768 - res = 0; - break; - case 0x5f02: - *eax = 0x5f; - *ebx = (*ebx & 0xffff0000) | 2; - *ecx = (*ecx & 0xffff0000) | 0x401; // PAL + crt only - *edx = (*edx & 0xffff0000) | 0; // TV Layout - default - res = 0; - break; - case 0x5f0f: - *eax = 0x860f; - break; - case 0xBEA7: - *eax = 66; - break; - case 0xBEA4: - *eax = 500; - break; - } - return res; -} |