diff options
Diffstat (limited to 'src/cpu')
| -rw-r--r-- | src/cpu/amd/car/cache_as_ram.inc | 74 |
1 files changed, 56 insertions, 18 deletions
diff --git a/src/cpu/amd/car/cache_as_ram.inc b/src/cpu/amd/car/cache_as_ram.inc index 8b8f53c515..162680db73 100644 --- a/src/cpu/amd/car/cache_as_ram.inc +++ b/src/cpu/amd/car/cache_as_ram.inc @@ -24,12 +24,22 @@ /* leave some space for global variable to pass to RAM stage */ #define GlobalVarSize DCACHE_RAM_GLOBAL_VAR_SIZE -#if CAR_FAM10 == 1 +/* for CAR_FAM10 */ #define CacheSizeAPStack 0x400 /* 1K */ -#endif + +#define jmp_if_k8(x) comisd %xmm2, %xmm1; jb x + +#define CPUID_MASK 0x0ff00f00 +#define CPUID_VAL_FAM10_ROTATED 0x0f000010 #include <cpu/x86/mtrr.h> #include <cpu/amd/mtrr.h> +/* + XMM map: + xmm1: cpu family + xmm2: fam10 comparison value + xmm3: backup ebx +*/ /* Save the BIST result */ movl %eax, %ebp @@ -41,6 +51,24 @@ cache_as_ram_setup: movb $0xA0, %al outb %al, $0x80 + /* enable SSE */ + movl %cr4, %eax + orl $(3<<9), %eax + movl %eax, %cr4 + + /* figure out cpu family */ + cvtsi2sd %ebx, %xmm3 + movl $0x01, %eax + cpuid + /* base family is bits 8..11, extended family is bits 20..27 */ + andl $CPUID_MASK, %eax + /* reorder bits for easier comparison by value */ + roll $0x10, %eax + cvtsi2sd %eax, %xmm1 + movl $CPUID_VAL_FAM10_ROTATED, %eax + cvtsi2sd %eax, %xmm2 + cvtsd2si %xmm3, %ebx + /* hope we can skip the double set for normal part */ #if ((HAVE_FAILOVER_BOOT == 1) && (USE_FAILOVER_IMAGE == 1)) || ((HAVE_FAILOVER_BOOT == 0) && (USE_FALLBACK_IMAGE == 1)) @@ -50,7 +78,8 @@ cache_as_ram_setup: andl $(1 << 11), %eax movl %eax, %ebx /* We store the status */ -#if CAR_FAM10 == 1 + jmp_if_k8(CAR_FAM10_out_post_errata) + /* for GH, CAR need to set DRAM Base/Limit Registers to direct that to node0 */ /* Only BSP needed, for other nodes set during HT/memory init. */ @@ -86,16 +115,14 @@ cache_as_ram_setup: CAR_FAM10_out: -#endif - -#if CAR_FAM10 == 1 /* Errata 193: Disable clean copybacks to L3 cache to allow cached ROM. Re-enable it in after RAM is initialized and before CAR is disabled */ movl $0xc001102a, %ecx rdmsr bts $15, %eax wrmsr -#endif + +CAR_FAM10_out_post_errata: /* Set MtrrFixDramModEn for clear fixed mtrr */ enable_fixed_mtrr_dram_modify: @@ -134,8 +161,10 @@ clear_fixed_var_mtrr_out: * macro will have a monotonically increasing segs parameter. */ xorl \reg, \reg -#if CAR_FAM10 == 1 -.elseif \segs == 1 +.else + jmp_if_k8(1f) + +.if \segs == 1 movl $0x1e000000, \reg /* WB MEM type */ .elseif \segs == 2 movl $0x1e1e0000, \reg /* WB MEM type */ @@ -143,8 +172,10 @@ clear_fixed_var_mtrr_out: movl $0x1e1e1e00, \reg /* WB MEM type */ .elseif \segs >= 4 movl $0x1e1e1e1e, \reg /* WB MEM type */ -#else -.elseif \segs == 1 +.endif + jmp 2f +1: +.if \segs == 1 movl $0x06000000, \reg /* WB IO type */ .elseif \segs == 2 movl $0x06060000, \reg /* WB IO type */ @@ -152,8 +183,9 @@ clear_fixed_var_mtrr_out: movl $0x06060600, \reg /* WB IO type */ .elseif \segs >= 4 movl $0x06060606, \reg /* WB IO type */ -#endif .endif +2: +.endif /* if \segs <= 0 */ .endm /* size is the cache size in bytes we want to use for CAR. @@ -219,7 +251,10 @@ clear_fixed_var_mtrr_out: wrmsr movl $0x203, %ecx - movl $((1 << (CPU_ADDR_BITS - 32)) - 1), %edx /* AMD 40 bit for K8, 48 bit for GH */ + movl $0xff, %edx /* (1 << (CPU_ADDR_BITS - 32)) - 1 for K8 (CPU_ADDR_BITS = 40) */ + jmp_if_k8(wbcache_post_fam10_setup) + movl $0xffff, %edx /* (1 << (CPU_ADDR_BITS - 32)) - 1 for FAM10 (CPU_ADDR_BITS = 48) */ +wbcache_post_fam10_setup: movl $(~(XIP_ROM_SIZE - 1) | 0x800), %eax wrmsr #endif /* XIP_ROM_SIZE && XIP_ROM_BASE */ @@ -248,13 +283,14 @@ clear_fixed_var_mtrr_out: movl %eax, %cr0 -#if CAR_FAM10 == 1 + jmp_if_k8(fam10_end_part1) + /* So we need to check if it is BSP */ movl $0x1b, %ecx rdmsr bt $8, %eax /*BSC */ jnc CAR_FAM10_ap -#endif +fam10_end_part1: movb $0xA2, %al outb %al, $0x80 @@ -280,8 +316,6 @@ clear_fixed_var_mtrr_out: movb $0xA3, %al outb %al, $0x80 -#if CAR_FAM10 == 1 - jmp CAR_FAM10_ap_out CAR_FAM10_ap: /* need to set stack pointer for AP */ @@ -326,11 +360,15 @@ roll_cfg: outb %al, $0x80 CAR_FAM10_ap_out: -#endif movb $0xA5, %al outb %al, $0x80 + /* disable SSE */ + movl %cr4, %eax + andl $~(3<<9), %eax + movl %eax, %cr4 + /* Restore the BIST result */ movl %ebp, %eax |