diff options
Diffstat (limited to 'src/cpu')
| -rw-r--r-- | src/cpu/allwinner/a10/uart.c | 16 |
1 files changed, 8 insertions, 8 deletions
diff --git a/src/cpu/allwinner/a10/uart.c b/src/cpu/allwinner/a10/uart.c index feccc8232f..407bd863aa 100644 --- a/src/cpu/allwinner/a10/uart.c +++ b/src/cpu/allwinner/a10/uart.c @@ -22,19 +22,19 @@ static void a10_uart_configure(struct a10_uart *uart, u32 baud_rate, u8 data_bit div = (u16) uart_baudrate_divisor(baud_rate, uart_platform_refclk(), 16); /* Enable access to Divisor Latch register */ - write32(UART_LCR_DLAB, &uart->lcr); + write32(UART8250_LCR_DLAB, &uart->lcr); /* Set baudrate */ write32((div >> 8) & 0xff, &uart->dlh); write32(div & 0xff, &uart->dll); /* Set line control */ - reg32 = (data_bits - 5) & UART_LCR_WLS_MSK; + reg32 = (data_bits - 5) & UART8250_LCR_WLS_MSK; switch (parity) { case UART_PARITY_ODD: - reg32 |= UART_LCR_PEN; + reg32 |= UART8250_LCR_PEN; break; case UART_PARITY_EVEN: - reg32 |= UART_LCR_PEN; - reg32 |= UART_LCR_EPS; + reg32 |= UART8250_LCR_PEN; + reg32 |= UART8250_LCR_EPS; break; case UART_PARITY_NONE: /* Fall through */ default: @@ -45,7 +45,7 @@ static void a10_uart_configure(struct a10_uart *uart, u32 baud_rate, u8 data_bit static void a10_uart_enable_fifos(struct a10_uart *uart) { - write32(UART_FCR_FIFO_EN, &uart->fcr); + write32(UART8250_FCR_FIFO_EN, &uart->fcr); } static int tx_fifo_full(struct a10_uart *uart) @@ -54,12 +54,12 @@ static int tx_fifo_full(struct a10_uart *uart) * that the TX register is empty, not that the FIFO is not full, but * this may be due to a datasheet typo. Keep the current name to signal * intent. */ - return !(read32(&uart->lsr) & UART_LSR_THRE); + return !(read32(&uart->lsr) & UART8250_LSR_THRE); } static int rx_fifo_empty(struct a10_uart *uart) { - return !(read32(&uart->lsr) & UART_LSR_DR); + return !(read32(&uart->lsr) & UART8250_LSR_DR); } /** |