diff options
Diffstat (limited to 'src/cpu')
| -rw-r--r-- | src/cpu/armltd/cortex-a9/cache.c | 1 | ||||
| -rw-r--r-- | src/cpu/samsung/exynos5250/clock_init.c | 1 | ||||
| -rw-r--r-- | src/cpu/samsung/exynos5250/dmc_common.c | 23 | ||||
| -rw-r--r-- | src/cpu/samsung/exynos5250/dmc_init_ddr3.c | 7 |
4 files changed, 19 insertions, 13 deletions
diff --git a/src/cpu/armltd/cortex-a9/cache.c b/src/cpu/armltd/cortex-a9/cache.c index 957871dba7..4f440ec4e9 100644 --- a/src/cpu/armltd/cortex-a9/cache.c +++ b/src/cpu/armltd/cortex-a9/cache.c @@ -12,7 +12,6 @@ */ #include <common.h> -#include <system.h> #include <armv7.h> /* diff --git a/src/cpu/samsung/exynos5250/clock_init.c b/src/cpu/samsung/exynos5250/clock_init.c index c8479deef5..c94cadfbd4 100644 --- a/src/cpu/samsung/exynos5250/clock_init.c +++ b/src/cpu/samsung/exynos5250/clock_init.c @@ -25,7 +25,6 @@ #include <delay.h> #include <stdlib.h> #include <types.h> -#include <system.h> #include <console/console.h> diff --git a/src/cpu/samsung/exynos5250/dmc_common.c b/src/cpu/samsung/exynos5250/dmc_common.c index 8c4b583a9e..bcfc9fe2c2 100644 --- a/src/cpu/samsung/exynos5250/dmc_common.c +++ b/src/cpu/samsung/exynos5250/dmc_common.c @@ -24,12 +24,11 @@ #include <arch/io.h> #include <assert.h> -#include <common.h> +#include <delay.h> #include <console/console.h> #include <cpu/samsung/exynos5250/setup.h> #include <cpu/samsung/exynos5250/dmc.h> #include <cpu/samsung/exynos5250/clock_init.h> -#include <system.h> #include "clock_init.h" #include "setup.h" @@ -75,7 +74,7 @@ int dmc_config_zq(struct mem_timings *mem, */ i = ZQ_INIT_TIMEOUT; while ((readl(&phy0_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) { - sdelay(100); + udelay(1); i--; } if (!i) @@ -84,7 +83,7 @@ int dmc_config_zq(struct mem_timings *mem, i = ZQ_INIT_TIMEOUT; while ((readl(&phy1_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) { - sdelay(100); + udelay(1); i--; } if (!i) @@ -135,21 +134,27 @@ void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc) * delays? This one and the next were not there for * DDR3. */ - sdelay(0x10000); + udelay(100); /* Sending EMRS/MRS commands */ for (i = 0; i < MEM_TIMINGS_MSR_COUNT; i++) { writel(mem->direct_cmd_msr[i] | mask, &dmc->directcmd); - sdelay(0x10000); + udelay(100); } if (mem->send_zq_init) { /* Sending ZQINIT command */ writel(DIRECT_CMD_ZQINIT | mask, &dmc->directcmd); - - sdelay(10000); + /* + * FIXME: This was originally sdelay(10000) + * in the imported u-boot code. That may have + * been meant to be sdelay(0x10000) since that + * was used elsewhere in this function. Either + * way seems to work, though. + */ + udelay(12); } } } @@ -168,7 +173,7 @@ void dmc_config_prech(struct mem_timings *mem, struct exynos5_dmc *dmc) /* PALL (all banks precharge) CMD */ writel(DIRECT_CMD_PALL | mask, &dmc->directcmd); - sdelay(0x10000); + udelay(100); } } } diff --git a/src/cpu/samsung/exynos5250/dmc_init_ddr3.c b/src/cpu/samsung/exynos5250/dmc_init_ddr3.c index 9a4ead0583..5bb8a372ff 100644 --- a/src/cpu/samsung/exynos5250/dmc_init_ddr3.c +++ b/src/cpu/samsung/exynos5250/dmc_init_ddr3.c @@ -23,12 +23,12 @@ */ #include <config.h> +#include <delay.h> #include <arch/io.h> #include <console/console.h> //#include "clock.h" /* FIXME(dhendrix): untangle clock/clk ... */ #include <cpu/samsung/exynos5-common/clock.h> -#include <system.h> #include "clk.h" #include "cpu.h" #include "dmc.h" @@ -44,6 +44,7 @@ static void reset_phy_ctrl(void) writel(LPDDR3PHY_CTRL_PHY_RESET_OFF, &clk->lpddr3phy_ctrl); writel(LPDDR3PHY_CTRL_PHY_RESET, &clk->lpddr3phy_ctrl); +#if 0 /* * For proper memory initialization there should be a minimum delay of * 500us after the LPDDR3PHY_CTRL_PHY_RESET signal. @@ -56,6 +57,8 @@ static void reset_phy_ctrl(void) * TODO(hatim.rv@samsung.com): Implement the delay using timer/counter */ sdelay(425000); +#endif + udelay(500); } int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size) @@ -236,7 +239,7 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size) * TODO(waihong): Comment on how long this take to * timeout */ - sdelay(100); + udelay(1); i--; } if (!i){ |