diff options
Diffstat (limited to 'src/cpu/samsung')
30 files changed, 4461 insertions, 0 deletions
diff --git a/src/cpu/samsung/exynos5250/ace_sfr.h b/src/cpu/samsung/exynos5250/ace_sfr.h new file mode 100644 index 0000000000..8f1c893d37 --- /dev/null +++ b/src/cpu/samsung/exynos5250/ace_sfr.h @@ -0,0 +1,310 @@ +/* + * Header file for Advanced Crypto Engine - SFR definitions + * + * Copyright (c) 2012 Samsung Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __ACE_SFR_H +#define __ACE_SFR_H + +struct exynos_ace_sfr { + unsigned int fc_intstat; /* base + 0 */ + unsigned int fc_intenset; + unsigned int fc_intenclr; + unsigned int fc_intpend; + unsigned int fc_fifostat; + unsigned int fc_fifoctrl; + unsigned int fc_global; + unsigned int res1; + unsigned int fc_brdmas; + unsigned int fc_brdmal; + unsigned int fc_brdmac; + unsigned int res2; + unsigned int fc_btdmas; + unsigned int fc_btdmal; + unsigned int fc_btdmac; + unsigned int res3; + unsigned int fc_hrdmas; + unsigned int fc_hrdmal; + unsigned int fc_hrdmac; + unsigned int res4; + unsigned int fc_pkdmas; + unsigned int fc_pkdmal; + unsigned int fc_pkdmac; + unsigned int fc_pkdmao; + unsigned char res5[0x1a0]; + + unsigned int aes_control; /* base + 0x200 */ + unsigned int aes_status; + unsigned char res6[0x8]; + unsigned int aes_in[4]; + unsigned int aes_out[4]; + unsigned int aes_iv[4]; + unsigned int aes_cnt[4]; + unsigned char res7[0x30]; + unsigned int aes_key[8]; + unsigned char res8[0x60]; + + unsigned int tdes_control; /* base + 0x300 */ + unsigned int tdes_status; + unsigned char res9[0x8]; + unsigned int tdes_key[6]; + unsigned int tdes_iv[2]; + unsigned int tdes_in[2]; + unsigned int tdes_out[2]; + unsigned char res10[0xc0]; + + unsigned int hash_control; /* base + 0x400 */ + unsigned int hash_control2; + unsigned int hash_fifo_mode; + unsigned int hash_byteswap; + unsigned int hash_status; + unsigned char res11[0xc]; + unsigned int hash_msgsize_low; + unsigned int hash_msgsize_high; + unsigned int hash_prelen_low; + unsigned int hash_prelen_high; + unsigned int hash_in[16]; + unsigned int hash_key_in[16]; + unsigned int hash_iv[8]; + unsigned char res12[0x30]; + unsigned int hash_result[8]; + unsigned char res13[0x20]; + unsigned int hash_seed[8]; + unsigned int hash_prng[8]; + unsigned char res14[0x180]; + + unsigned int pka_sfr[5]; /* base + 0x700 */ +}; + +/* ACE_FC_INT */ +#define ACE_FC_PKDMA (1 << 0) +#define ACE_FC_HRDMA (1 << 1) +#define ACE_FC_BTDMA (1 << 2) +#define ACE_FC_BRDMA (1 << 3) +#define ACE_FC_PRNG_ERROR (1 << 4) +#define ACE_FC_MSG_DONE (1 << 5) +#define ACE_FC_PRNG_DONE (1 << 6) +#define ACE_FC_PARTIAL_DONE (1 << 7) + +/* ACE_FC_FIFOSTAT */ +#define ACE_FC_PKFIFO_EMPTY (1 << 0) +#define ACE_FC_PKFIFO_FULL (1 << 1) +#define ACE_FC_HRFIFO_EMPTY (1 << 2) +#define ACE_FC_HRFIFO_FULL (1 << 3) +#define ACE_FC_BTFIFO_EMPTY (1 << 4) +#define ACE_FC_BTFIFO_FULL (1 << 5) +#define ACE_FC_BRFIFO_EMPTY (1 << 6) +#define ACE_FC_BRFIFO_FULL (1 << 7) + +/* ACE_FC_FIFOCTRL */ +#define ACE_FC_SELHASH_MASK (3 << 0) +#define ACE_FC_SELHASH_EXOUT (0 << 0) /* independent source */ +#define ACE_FC_SELHASH_BCIN (1 << 0) /* blk cipher input */ +#define ACE_FC_SELHASH_BCOUT (2 << 0) /* blk cipher output */ +#define ACE_FC_SELBC_MASK (1 << 2) +#define ACE_FC_SELBC_AES (0 << 2) /* AES */ +#define ACE_FC_SELBC_DES (1 << 2) /* DES */ + +/* ACE_FC_GLOBAL */ +#define ACE_FC_SSS_RESET (1 << 0) +#define ACE_FC_DMA_RESET (1 << 1) +#define ACE_FC_AES_RESET (1 << 2) +#define ACE_FC_DES_RESET (1 << 3) +#define ACE_FC_HASH_RESET (1 << 4) +#define ACE_FC_AXI_ENDIAN_MASK (3 << 6) +#define ACE_FC_AXI_ENDIAN_LE (0 << 6) +#define ACE_FC_AXI_ENDIAN_BIBE (1 << 6) +#define ACE_FC_AXI_ENDIAN_WIBE (2 << 6) + +/* Feed control - BRDMA control */ +#define ACE_FC_BRDMACFLUSH_OFF (0 << 0) +#define ACE_FC_BRDMACFLUSH_ON (1 << 0) +#define ACE_FC_BRDMACSWAP_ON (1 << 1) +#define ACE_FC_BRDMACARPROT_MASK (0x7 << 2) +#define ACE_FC_BRDMACARPROT_OFS (2) +#define ACE_FC_BRDMACARCACHE_MASK (0xf << 5) +#define ACE_FC_BRDMACARCACHE_OFS (5) + +/* Feed control - BTDMA control */ +#define ACE_FC_BTDMACFLUSH_OFF (0 << 0) +#define ACE_FC_BTDMACFLUSH_ON (1 << 0) +#define ACE_FC_BTDMACSWAP_ON (1 << 1) +#define ACE_FC_BTDMACAWPROT_MASK (0x7 << 2) +#define ACE_FC_BTDMACAWPROT_OFS (2) +#define ACE_FC_BTDMACAWCACHE_MASK (0xf << 5) +#define ACE_FC_BTDMACAWCACHE_OFS (5) + +/* Feed control - HRDMA control */ +#define ACE_FC_HRDMACFLUSH_OFF (0 << 0) +#define ACE_FC_HRDMACFLUSH_ON (1 << 0) +#define ACE_FC_HRDMACSWAP_ON (1 << 1) +#define ACE_FC_HRDMACARPROT_MASK (0x7 << 2) +#define ACE_FC_HRDMACARPROT_OFS (2) +#define ACE_FC_HRDMACARCACHE_MASK (0xf << 5) +#define ACE_FC_HRDMACARCACHE_OFS (5) + +/* Feed control - PKDMA control */ +#define ACE_FC_PKDMACBYTESWAP_ON (1 << 3) +#define ACE_FC_PKDMACDESEND_ON (1 << 2) +#define ACE_FC_PKDMACTRANSMIT_ON (1 << 1) +#define ACE_FC_PKDMACFLUSH_ON (1 << 0) + +/* Feed control - PKDMA offset */ +#define ACE_FC_SRAMOFFSET_MASK (0xfff) + +/* AES control */ +#define ACE_AES_MODE_MASK (1 << 0) +#define ACE_AES_MODE_ENC (0 << 0) +#define ACE_AES_MODE_DEC (1 << 0) +#define ACE_AES_OPERMODE_MASK (3 << 1) +#define ACE_AES_OPERMODE_ECB (0 << 1) +#define ACE_AES_OPERMODE_CBC (1 << 1) +#define ACE_AES_OPERMODE_CTR (2 << 1) +#define ACE_AES_FIFO_MASK (1 << 3) +#define ACE_AES_FIFO_OFF (0 << 3) /* CPU mode */ +#define ACE_AES_FIFO_ON (1 << 3) /* FIFO mode */ +#define ACE_AES_KEYSIZE_MASK (3 << 4) +#define ACE_AES_KEYSIZE_128 (0 << 4) +#define ACE_AES_KEYSIZE_192 (1 << 4) +#define ACE_AES_KEYSIZE_256 (2 << 4) +#define ACE_AES_KEYCNGMODE_MASK (1 << 6) +#define ACE_AES_KEYCNGMODE_OFF (0 << 6) +#define ACE_AES_KEYCNGMODE_ON (1 << 6) +#define ACE_AES_SWAP_MASK (0x1f << 7) +#define ACE_AES_SWAPKEY_OFF (0 << 7) +#define ACE_AES_SWAPKEY_ON (1 << 7) +#define ACE_AES_SWAPCNT_OFF (0 << 8) +#define ACE_AES_SWAPCNT_ON (1 << 8) +#define ACE_AES_SWAPIV_OFF (0 << 9) +#define ACE_AES_SWAPIV_ON (1 << 9) +#define ACE_AES_SWAPDO_OFF (0 << 10) +#define ACE_AES_SWAPDO_ON (1 << 10) +#define ACE_AES_SWAPDI_OFF (0 << 11) +#define ACE_AES_SWAPDI_ON (1 << 11) +#define ACE_AES_COUNTERSIZE_MASK (3 << 12) +#define ACE_AES_COUNTERSIZE_128 (0 << 12) +#define ACE_AES_COUNTERSIZE_64 (1 << 12) +#define ACE_AES_COUNTERSIZE_32 (2 << 12) +#define ACE_AES_COUNTERSIZE_16 (3 << 12) + +/* AES status */ +#define ACE_AES_OUTRDY_MASK (1 << 0) +#define ACE_AES_OUTRDY_OFF (0 << 0) +#define ACE_AES_OUTRDY_ON (1 << 0) +#define ACE_AES_INRDY_MASK (1 << 1) +#define ACE_AES_INRDY_OFF (0 << 1) +#define ACE_AES_INRDY_ON (1 << 1) +#define ACE_AES_BUSY_MASK (1 << 2) +#define ACE_AES_BUSY_OFF (0 << 2) +#define ACE_AES_BUSY_ON (1 << 2) + +/* TDES control */ +#define ACE_TDES_MODE_MASK (1 << 0) +#define ACE_TDES_MODE_ENC (0 << 0) +#define ACE_TDES_MODE_DEC (1 << 0) +#define ACE_TDES_OPERMODE_MASK (1 << 1) +#define ACE_TDES_OPERMODE_ECB (0 << 1) +#define ACE_TDES_OPERMODE_CBC (1 << 1) +#define ACE_TDES_SEL_MASK (3 << 3) +#define ACE_TDES_SEL_DES (0 << 3) +#define ACE_TDES_SEL_TDESEDE (1 << 3) /* TDES EDE mode */ +#define ACE_TDES_SEL_TDESEEE (3 << 3) /* TDES EEE mode */ +#define ACE_TDES_FIFO_MASK (1 << 5) +#define ACE_TDES_FIFO_OFF (0 << 5) /* CPU mode */ +#define ACE_TDES_FIFO_ON (1 << 5) /* FIFO mode */ +#define ACE_TDES_SWAP_MASK (0xf << 6) +#define ACE_TDES_SWAPKEY_OFF (0 << 6) +#define ACE_TDES_SWAPKEY_ON (1 << 6) +#define ACE_TDES_SWAPIV_OFF (0 << 7) +#define ACE_TDES_SWAPIV_ON (1 << 7) +#define ACE_TDES_SWAPDO_OFF (0 << 8) +#define ACE_TDES_SWAPDO_ON (1 << 8) +#define ACE_TDES_SWAPDI_OFF (0 << 9) +#define ACE_TDES_SWAPDI_ON (1 << 9) + +/* TDES status */ +#define ACE_TDES_OUTRDY_MASK (1 << 0) +#define ACE_TDES_OUTRDY_OFF (0 << 0) +#define ACE_TDES_OUTRDY_ON (1 << 0) +#define ACE_TDES_INRDY_MASK (1 << 1) +#define ACE_TDES_INRDY_OFF (0 << 1) +#define ACE_TDES_INRDY_ON (1 << 1) +#define ACE_TDES_BUSY_MASK (1 << 2) +#define ACE_TDES_BUSY_OFF (0 << 2) +#define ACE_TDES_BUSY_ON (1 << 2) + +/* Hash control */ +#define ACE_HASH_ENGSEL_MASK (0xf << 0) +#define ACE_HASH_ENGSEL_SHA1HASH (0x0 << 0) +#define ACE_HASH_ENGSEL_SHA1HMAC (0x1 << 0) +#define ACE_HASH_ENGSEL_SHA1HMACIN (0x1 << 0) +#define ACE_HASH_ENGSEL_SHA1HMACOUT (0x9 << 0) +#define ACE_HASH_ENGSEL_MD5HASH (0x2 << 0) +#define ACE_HASH_ENGSEL_MD5HMAC (0x3 << 0) +#define ACE_HASH_ENGSEL_MD5HMACIN (0x3 << 0) +#define ACE_HASH_ENGSEL_MD5HMACOUT (0xb << 0) +#define ACE_HASH_ENGSEL_SHA256HASH (0x4 << 0) +#define ACE_HASH_ENGSEL_SHA256HMAC (0x5 << 0) +#define ACE_HASH_ENGSEL_PRNG (0x8 << 0) +#define ACE_HASH_STARTBIT_ON (1 << 4) +#define ACE_HASH_USERIV_EN (1 << 5) + +/* Hash control 2 */ +#define ACE_HASH_PAUSE_ON (1 << 0) + +/* Hash control - FIFO mode */ +#define ACE_HASH_FIFO_MASK (1 << 0) +#define ACE_HASH_FIFO_OFF (0 << 0) +#define ACE_HASH_FIFO_ON (1 << 0) + +/* Hash control - byte swap */ +#define ACE_HASH_SWAP_MASK (0xf << 0) +#define ACE_HASH_SWAPKEY_OFF (0 << 0) +#define ACE_HASH_SWAPKEY_ON (1 << 0) +#define ACE_HASH_SWAPIV_OFF (0 << 1) +#define ACE_HASH_SWAPIV_ON (1 << 1) +#define ACE_HASH_SWAPDO_OFF (0 << 2) +#define ACE_HASH_SWAPDO_ON (1 << 2) +#define ACE_HASH_SWAPDI_OFF (0 << 3) +#define ACE_HASH_SWAPDI_ON (1 << 3) + +/* Hash status */ +#define ACE_HASH_BUFRDY_MASK (1 << 0) +#define ACE_HASH_BUFRDY_OFF (0 << 0) +#define ACE_HASH_BUFRDY_ON (1 << 0) +#define ACE_HASH_SEEDSETTING_MASK (1 << 1) +#define ACE_HASH_SEEDSETTING_OFF (0 << 1) +#define ACE_HASH_SEEDSETTING_ON (1 << 1) +#define ACE_HASH_PRNGBUSY_MASK (1 << 2) +#define ACE_HASH_PRNGBUSY_OFF (0 << 2) +#define ACE_HASH_PRNGBUSY_ON (1 << 2) +#define ACE_HASH_PARTIALDONE_MASK (1 << 4) +#define ACE_HASH_PARTIALDONE_OFF (0 << 4) +#define ACE_HASH_PARTIALDONE_ON (1 << 4) +#define ACE_HASH_PRNGDONE_MASK (1 << 5) +#define ACE_HASH_PRNGDONE_OFF (0 << 5) +#define ACE_HASH_PRNGDONE_ON (1 << 5) +#define ACE_HASH_MSGDONE_MASK (1 << 6) +#define ACE_HASH_MSGDONE_OFF (0 << 6) +#define ACE_HASH_MSGDONE_ON (1 << 6) +#define ACE_HASH_PRNGERROR_MASK (1 << 7) +#define ACE_HASH_PRNGERROR_OFF (0 << 7) +#define ACE_HASH_PRNGERROR_ON (1 << 7) + +#endif diff --git a/src/cpu/samsung/exynos5250/ace_sha.h b/src/cpu/samsung/exynos5250/ace_sha.h new file mode 100644 index 0000000000..ed4e4d5785 --- /dev/null +++ b/src/cpu/samsung/exynos5250/ace_sha.h @@ -0,0 +1,41 @@ +/* + * Header file for SHA firmware + * + * Copyright (c) 2012 Samsung Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#ifndef __ACE_FW_SHA1_H +#define __ACE_FW_SHA1_H + +#define ACE_SHA_TYPE_SHA1 1 +#define ACE_SHA_TYPE_SHA256 2 + +/** + * Computes hash value of input pbuf using ACE + * + * @param pout A pointer to the output buffer. When complete + * 32 bytes are copied to pout[0]...pout[31]. Thus, a user + * should allocate at least 32 bytes at pOut in advance. + * @param pbuf A pointer to the input buffer + * @param buflen Byte length of input buffer + * @param hash_type SHA1 or SHA256 + * + * @return 0 Success + */ +int ace_sha_hash_digest(uchar *pout, uchar *pbuf, uint buflen, uint hash_type); + +#endif diff --git a/src/cpu/samsung/exynos5250/adc.h b/src/cpu/samsung/exynos5250/adc.h new file mode 100644 index 0000000000..86fcb88948 --- /dev/null +++ b/src/cpu/samsung/exynos5250/adc.h @@ -0,0 +1,27 @@ +/* + * (C) Copyright 2012 Samsung Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#ifndef __ASM_ARM_ARCH_EXYNOS5_ADC_H__ +#define __ASM_ARM_ARCH_EXYNOS5_ADC_H__ + +#include <asm/arch-exynos/adc.h> + +#endif /* __ASM_ARM_ARCH_EXYNOS5_ADC_H__ */ diff --git a/src/cpu/samsung/exynos5250/clk.h b/src/cpu/samsung/exynos5250/clk.h new file mode 100644 index 0000000000..91b54fd891 --- /dev/null +++ b/src/cpu/samsung/exynos5250/clk.h @@ -0,0 +1,586 @@ +/* + * (C) Copyright 2012 Samsung Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#ifndef __EXYNOS5_CLK_H__ +#define __EXYNOS5_CLK_H__ + +#include <cpu/samsung/exynos-common/clk.h> +#include <cpu/samsung/exynos5250/pinmux.h> + +/* + * Set mshci controller instances clock drivder + * + * @param enum periph_id instance of the mshci controller + * + * Return 0 if ok else -1 + */ +int clock_set_mshci(enum periph_id peripheral); + +/* + * Sets the epll clockrate + * + * @param rate Required clock rate to the presacaler in Hz + * + * Return 0 if ok else -1 + */ +int clock_epll_set_rate(unsigned long rate); + +/* + * selects the clk source for I2S MCLK + */ +void clock_select_i2s_clk_source(void); + +/* + * Set prescaler division based on input and output frequency + * for i2s audio clock + * + * @param src_frq Source frequency in Hz + * @param dst_frq Required MCLK frequency in Hz + * + * Return 0 if ok else -1 + */ +int clock_set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq); + +/* FIXME(dhendrix): below is stuff from arch/arm/include/asm/arch-exynos5/clock.h + (as opposed to the two clk.h files as they were named in u-boot... */ +struct exynos5_clock { + unsigned int apll_lock; /* base + 0 */ + unsigned char res1[0xfc]; + unsigned int apll_con0; + unsigned int apll_con1; + unsigned char res2[0xf8]; + unsigned int src_cpu; + unsigned char res3[0x1fc]; + unsigned int mux_stat_cpu; + unsigned char res4[0xfc]; + unsigned int div_cpu0; + unsigned int div_cpu1; + unsigned char res5[0xf8]; + unsigned int div_stat_cpu0; + unsigned int div_stat_cpu1; + unsigned char res6[0x1f8]; + unsigned int gate_sclk_cpu; + unsigned char res7[0x1fc]; + unsigned int clkout_cmu_cpu; + unsigned int clkout_cmu_cpu_div_stat; + unsigned char res8[0x5f8]; + + unsigned int armclk_stopctrl; /* base + 0x1000 */ + unsigned int atclk_stopctrl; + unsigned char res9[0x8]; + unsigned int parityfail_status; + unsigned int parityfail_clear; + unsigned char res10[0x8]; + unsigned int pwr_ctrl; + unsigned int pwr_ctr2; + unsigned char res11[0xd8]; + unsigned int apll_con0_l8; + unsigned int apll_con0_l7; + unsigned int apll_con0_l6; + unsigned int apll_con0_l5; + unsigned int apll_con0_l4; + unsigned int apll_con0_l3; + unsigned int apll_con0_l2; + unsigned int apll_con0_l1; + unsigned int iem_control; + unsigned char res12[0xdc]; + unsigned int apll_con1_l8; + unsigned int apll_con1_l7; + unsigned int apll_con1_l6; + unsigned int apll_con1_l5; + unsigned int apll_con1_l4; + unsigned int apll_con1_l3; + unsigned int apll_con1_l2; + unsigned int apll_con1_l1; + unsigned char res13[0xe0]; + unsigned int div_iem_l8; + unsigned int div_iem_l7; + unsigned int div_iem_l6; + unsigned int div_iem_l5; + unsigned int div_iem_l4; + unsigned int div_iem_l3; + unsigned int div_iem_l2; + unsigned int div_iem_l1; + unsigned char res14[0x2ce0]; + + unsigned int mpll_lock; /* base + 0x4000 */ + unsigned char res15[0xfc]; + unsigned int mpll_con0; + unsigned int mpll_con1; + unsigned char res16[0xf8]; + unsigned int src_core0; + unsigned int src_core1; + unsigned char res17[0xf8]; + unsigned int src_mask_core; + unsigned char res18[0x100]; + unsigned int mux_stat_core1; + unsigned char res19[0xf8]; + unsigned int div_core0; + unsigned int div_core1; + unsigned int div_sysrgt; + unsigned char res20[0xf4]; + unsigned int div_stat_core0; + unsigned int div_stat_core1; + unsigned int div_stat_sysrgt; + unsigned char res21[0x2f4]; + unsigned int gate_ip_core; + unsigned int gate_ip_sysrgt; + unsigned char res22[0xf8]; + unsigned int clkout_cmu_core; + unsigned int clkout_cmu_core_div_stat; + unsigned char res23[0x5f8]; + + unsigned int dcgidx_map0; /* base + 0x5000 */ + unsigned int dcgidx_map1; + unsigned int dcgidx_map2; + unsigned char res24[0x14]; + unsigned int dcgperf_map0; + unsigned int dcgperf_map1; + unsigned char res25[0x18]; + unsigned int dvcidx_map; + unsigned char res26[0x1c]; + unsigned int freq_cpu; + unsigned int freq_dpm; + unsigned char res27[0x18]; + unsigned int dvsemclk_en; + unsigned int maxperf; + unsigned char res28[0x3478]; + + unsigned int div_acp; /* base + 0x8500 */ + unsigned char res29[0xfc]; + unsigned int div_stat_acp; + unsigned char res30[0x1fc]; + unsigned int gate_ip_acp; + unsigned char res31a[0xfc]; + unsigned int div_syslft; + unsigned char res31b[0xc]; + unsigned int div_stat_syslft; + unsigned char res31c[0xc]; + unsigned int gate_bus_syslft; + unsigned char res31d[0xdc]; + unsigned int clkout_cmu_acp; + unsigned int clkout_cmu_acp_div_stat; + unsigned char res32[0x38f8]; + + unsigned int div_isp0; /* base + 0xc300 */ + unsigned int div_isp1; + unsigned int div_isp2; + unsigned char res33[0xf4]; + + unsigned int div_stat_isp0; /* base + 0xc400 */ + unsigned int div_stat_isp1; + unsigned int div_stat_isp2; + unsigned char res34[0x3f4]; + + unsigned int gate_ip_isp0; /* base + 0xc800 */ + unsigned int gate_ip_isp1; + unsigned char res35[0xf8]; + unsigned int gate_sclk_isp; + unsigned char res36[0xc]; + unsigned int mcuisp_pwr_ctrl; + unsigned char res37[0xec]; + unsigned int clkout_cmu_isp; + unsigned int clkout_cmu_isp_div_stat; + unsigned char res38[0x3618]; + + unsigned int cpll_lock; /* base + 0x10020 */ + unsigned char res39[0xc]; + unsigned int epll_lock; + unsigned char res40[0xc]; + unsigned int vpll_lock; + unsigned char res41a[0xc]; + unsigned int gpll_lock; + unsigned char res41b[0xcc]; + unsigned int cpll_con0; + unsigned int cpll_con1; + unsigned char res42[0x8]; + unsigned int epll_con0; + unsigned int epll_con1; + unsigned int epll_con2; + unsigned char res43[0x4]; + unsigned int vpll_con0; + unsigned int vpll_con1; + unsigned int vpll_con2; + unsigned char res44a[0x4]; + unsigned int gpll_con0; + unsigned int gpll_con1; + unsigned char res44b[0xb8]; + unsigned int src_top0; + unsigned int src_top1; + unsigned int src_top2; + unsigned int src_top3; + unsigned int src_gscl; + unsigned int src_disp0_0; + unsigned int src_disp0_1; + unsigned int src_disp1_0; + unsigned int src_disp1_1; + unsigned char res46[0xc]; + unsigned int src_mau; + unsigned int src_fsys; + unsigned char res47[0x8]; + unsigned int src_peric0; + unsigned int src_peric1; + unsigned char res48[0x18]; + unsigned int sclk_src_isp; + unsigned char res49[0x9c]; + unsigned int src_mask_top; + unsigned char res50[0xc]; + unsigned int src_mask_gscl; + unsigned int src_mask_disp0_0; + unsigned int src_mask_disp0_1; + unsigned int src_mask_disp1_0; + unsigned int src_mask_disp1_1; + unsigned int src_mask_maudio; + unsigned char res52[0x8]; + unsigned int src_mask_fsys; + unsigned char res53[0xc]; + unsigned int src_mask_peric0; + unsigned int src_mask_peric1; + unsigned char res54[0x18]; + unsigned int src_mask_isp; + unsigned char res55[0x9c]; + unsigned int mux_stat_top0; + unsigned int mux_stat_top1; + unsigned int mux_stat_top2; + unsigned int mux_stat_top3; + unsigned char res56[0xf0]; + unsigned int div_top0; + unsigned int div_top1; + unsigned char res57[0x8]; + unsigned int div_gscl; + unsigned int div_disp0_0; + unsigned int div_disp0_1; + unsigned int div_disp1_0; + unsigned int div_disp1_1; + unsigned char res59[0x8]; + unsigned int div_gen; + unsigned char res60[0x4]; + unsigned int div_mau; + unsigned int div_fsys0; + unsigned int div_fsys1; + unsigned int div_fsys2; + unsigned int div_fsys3; + unsigned int div_peric0; + unsigned int div_peric1; + unsigned int div_peric2; + unsigned int div_peric3; + unsigned int div_peric4; + unsigned int div_peric5; + unsigned char res61[0x10]; + unsigned int sclk_div_isp; + unsigned char res62[0xc]; + unsigned int div2_ratio0; + unsigned int div2_ratio1; + unsigned char res63[0x8]; + unsigned int div4_ratio; + unsigned char res64[0x6c]; + unsigned int div_stat_top0; + unsigned int div_stat_top1; + unsigned char res65[0x8]; + unsigned int div_stat_gscl; + unsigned int div_stat_disp0_0; + unsigned int div_stat_disp0_1; + unsigned int div_stat_disp1_0; + unsigned int div_stat_disp1_1; + unsigned char res67[0x8]; + unsigned int div_stat_gen; + unsigned char res68[0x4]; + unsigned int div_stat_maudio; + unsigned int div_stat_fsys0; + unsigned int div_stat_fsys1; + unsigned int div_stat_fsys2; + unsigned int div_stat_fsys3; + unsigned int div_stat_peric0; + unsigned int div_stat_peric1; + unsigned int div_stat_peric2; + unsigned int div_stat_peric3; + unsigned int div_stat_peric4; + unsigned int div_stat_peric5; + unsigned char res69[0x10]; + unsigned int sclk_div_stat_isp; + unsigned char res70[0xc]; + unsigned int div2_stat0; + unsigned int div2_stat1; + unsigned char res71[0x8]; + unsigned int div4_stat; + unsigned char res72[0x180]; + unsigned int gate_top_sclk_disp0; + unsigned int gate_top_sclk_disp1; + unsigned int gate_top_sclk_gen; + unsigned char res74[0xc]; + unsigned int gate_top_sclk_mau; + unsigned int gate_top_sclk_fsys; + unsigned char res75[0xc]; + unsigned int gate_top_sclk_peric; + unsigned char res76[0x1c]; + unsigned int gate_top_sclk_isp; + unsigned char res77[0xac]; + unsigned int gate_ip_gscl; + unsigned int gate_ip_disp0; + unsigned int gate_ip_disp1; + unsigned int gate_ip_mfc; + unsigned int gate_ip_g3d; + unsigned int gate_ip_gen; + unsigned char res79[0xc]; + unsigned int gate_ip_fsys; + unsigned char res80[0x4]; + unsigned int gate_ip_gps; + unsigned int gate_ip_peric; + unsigned char res81[0xc]; + unsigned int gate_ip_peris; + unsigned char res82[0x1c]; + unsigned int gate_block; + unsigned char res83[0x7c]; + unsigned int clkout_cmu_top; + unsigned int clkout_cmu_top_div_stat; + unsigned char res84[0x37f8]; + + unsigned int src_lex; /* base + 0x14200 */ + unsigned char res85[0x1fc]; + unsigned int mux_stat_lex; + unsigned char res85b[0xfc]; + unsigned int div_lex; + unsigned char res86[0xfc]; + unsigned int div_stat_lex; + unsigned char res87[0x1fc]; + unsigned int gate_ip_lex; + unsigned char res88[0x1fc]; + unsigned int clkout_cmu_lex; + unsigned int clkout_cmu_lex_div_stat; + unsigned char res89[0x3af8]; + + unsigned int div_r0x; /* base + 0x18500 */ + unsigned char res90[0xfc]; + unsigned int div_stat_r0x; + unsigned char res91[0x1fc]; + unsigned int gate_ip_r0x; + unsigned char res92[0x1fc]; + unsigned int clkout_cmu_r0x; + unsigned int clkout_cmu_r0x_div_stat; + unsigned char res94[0x3af8]; + + unsigned int div_r1x; /* base + 0x1c500 */ + unsigned char res95[0xfc]; + unsigned int div_stat_r1x; + unsigned char res96[0x1fc]; + unsigned int gate_ip_r1x; + unsigned char res97[0x1fc]; + unsigned int clkout_cmu_r1x; + unsigned int clkout_cmu_r1x_div_stat; + unsigned char res98[0x3608]; + + unsigned int bpll_lock; /* base + 0x2000c */ + unsigned char res99[0xfc]; + unsigned int bpll_con0; + unsigned int bpll_con1; + unsigned char res100[0xe8]; + unsigned int src_cdrex; + unsigned char res101[0x1fc]; + unsigned int mux_stat_cdrex; + unsigned char res102[0xfc]; + unsigned int div_cdrex; + unsigned int div_cdrex2; + unsigned char res103[0xf8]; + unsigned int div_stat_cdrex; + unsigned char res104[0x2fc]; + unsigned int gate_ip_cdrex; + unsigned char res105[0xc]; + unsigned int c2c_monitor; + unsigned int dmc_pwr_ctrl; + unsigned char res106[0x4]; + unsigned int drex2_pause; + unsigned char res107[0xe0]; + unsigned int clkout_cmu_cdrex; + unsigned int clkout_cmu_cdrex_div_stat; + unsigned char res108[0x8]; + unsigned int lpddr3phy_ctrl; + unsigned char res109a[0xc]; + unsigned int lpddr3phy_con3; + unsigned int pll_div2_sel; + unsigned char res109b[0xf5e4]; +}; + +struct exynos5_mct_regs { + uint32_t mct_cfg; + uint8_t reserved0[0xfc]; + uint32_t g_cnt_l; + uint32_t g_cnt_u; + uint8_t reserved1[0x8]; + uint32_t g_cnt_wstat; + uint8_t reserved2[0xec]; + uint32_t g_comp0_l; + uint32_t g_comp0_u; + uint32_t g_comp0_addr_incr; + uint8_t reserved3[0x4]; + uint32_t g_comp1_l; + uint32_t g_comp1_u; + uint32_t g_comp1_addr_incr; + uint8_t reserved4[0x4]; + uint32_t g_comp2_l; + uint32_t g_comp2_u; + uint32_t g_comp2_addr_incr; + uint8_t reserved5[0x4]; + uint32_t g_comp3_l; + uint32_t g_comp3_u; + uint32_t g_comp3_addr_incr; + uint8_t reserved6[0x4]; + uint32_t g_tcon; + uint32_t g_int_cstat; + uint32_t g_int_enb; + uint32_t g_wstat; + uint8_t reserved7[0xb0]; + uint32_t l0_tcntb; + uint32_t l0_tcnto; + uint32_t l0_icntb; + uint32_t l0_icnto; + uint32_t l0_frcntb; + uint32_t l0_frcnto; + uint8_t reserved8[0x8]; + uint32_t l0_tcon; + uint8_t reserved9[0xc]; + uint32_t l0_int_cstat; + uint32_t l0_int_enb; + uint8_t reserved10[0x8]; + uint32_t l0_wstat; + uint8_t reserved11[0xbc]; + uint32_t l1_tcntb; + uint32_t l1_tcnto; + uint32_t l1_icntb; + uint32_t l1_icnto; + uint32_t l1_frcntb; + uint32_t l1_frcnto; + uint8_t reserved12[0x8]; + uint32_t l1_tcon; + uint8_t reserved13[0xc]; + uint32_t l1_int_cstat; + uint32_t l1_int_enb; + uint8_t reserved14[0x8]; + uint32_t l1_wstat; +}; + +#define EXYNOS5_EPLLCON0_LOCKED_SHIFT 29 /* EPLL Locked bit position*/ +#define EPLL_SRC_CLOCK 24000000 /*24 MHz Cristal Input */ +#define TIMEOUT_EPLL_LOCK 1000 + +#define AUDIO_0_RATIO_MASK 0x0f +#define AUDIO_1_RATIO_MASK 0x0f + +#define CLK_SRC_PERIC1 0x254 +#define AUDIO1_SEL_MASK 0xf +#define CLK_SRC_AUDIOCDCLK1 0x0 +#define CLK_SRC_XXTI 0x1 +#define CLK_SRC_SCLK_EPLL 0x7 + +/* CON0 bit-fields */ +#define EPLL_CON0_MDIV_MASK 0x1ff +#define EPLL_CON0_PDIV_MASK 0x3f +#define EPLL_CON0_SDIV_MASK 0x7 +#define EPLL_CON0_LOCKED_SHIFT 29 +#define EPLL_CON0_MDIV_SHIFT 16 +#define EPLL_CON0_PDIV_SHIFT 8 +#define EPLL_CON0_SDIV_SHIFT 0 +#define EPLL_CON0_LOCK_DET_EN_SHIFT 28 +#define EPLL_CON0_LOCK_DET_EN_MASK 1 + +/* structure for epll configuration used in audio clock configuration */ +struct st_epll_con_val { + unsigned int freq_out; /* frequency out */ + unsigned int en_lock_det; /* enable lock detect */ + unsigned int m_div; /* m divider value */ + unsigned int p_div; /* p divider value */ + unsigned int s_div; /* s divider value */ + unsigned int k_dsm; /* k value of delta signal modulator */ +}; + +/** + * Low-level function to set the clock pre-ratio for a peripheral + * + * @param periph_id Peripheral ID of peripheral to change + * @param divisor New divisor for this peripheral's clock + */ +void clock_ll_set_pre_ratio(enum periph_id periph_id, unsigned divisor); + +/** + * Low-level function to set the clock ratio for a peripheral + * + * @param periph_id Peripheral ID of peripheral to change + * @param divisor New divisor for this peripheral's clock + */ +void clock_ll_set_ratio(enum periph_id periph_id, unsigned divisor); + +/** + * Low-level function that selects the best clock scalars for a given rate and + * sets up the given peripheral's clock accordingly. + * + * @param periph_id Peripheral ID of peripheral to change + * @param rate Desired clock rate in Hz + * + * @return zero on success, negative on error + */ +int clock_set_rate(enum periph_id periph_id, unsigned int rate); + +/** + * Decode a peripheral ID from a device node. + * + * Drivers should always use this function since the actual means of + * encoding this information may change in the future as fdt support for + * exynos evolves. + * + * @param blob FDT blob to read from + * @param node Node containing the information + */ +int clock_decode_periph_id(const void *blob, int node); + +/* Clock gate unused IP */ +void clock_gate(void); + +enum ddr_mode; +enum mem_manuf; + +const char *clock_get_mem_type_name(enum ddr_mode mem_type); + +const char *clock_get_mem_manuf_name(enum mem_manuf mem_manuf); + +/* + * TODO(sjg@chromium.org): Remove this when we have more SPL space. + * At present we are using 14148 of 14336 bytes. If we change this function + * to be exported in SPL, we go over the edge. + */ +/* TODO(dhendrix): do we still need this ifndef? */ +//#ifndef CONFIG_SPL_BUILD +/** + * Get the required memory type and speed (Main U-Boot version). + * + * This should use the device tree. For now we cannot since this function is + * called before the FDT is available. + * + * @param mem_type Returns memory type + * @param frequency_mhz Returns memory speed in MHz + * @param arm_freq Returns ARM clock speed in MHz + * @param mem_manuf Return Memory Manufacturer name + * @return 0 if all ok (if not, this function currently does not return) + */ +int clock_get_mem_selection(enum ddr_mode *mem_type, + unsigned *frequency_mhz, unsigned *arm_freq, + enum mem_manuf *mem_manuf); +//#endif /* CONFIG_SPL_BUILD */ + +#endif diff --git a/src/cpu/samsung/exynos5250/clock_init.h b/src/cpu/samsung/exynos5250/clock_init.h new file mode 100644 index 0000000000..57a0fe693d --- /dev/null +++ b/src/cpu/samsung/exynos5250/clock_init.h @@ -0,0 +1,150 @@ +/* + * Clock initialization routines + * + * Copyright (c) 2011 The Chromium OS Authors. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __EXYNOS_CLOCK_INIT_H +#define __EXYNOS_CLOCK_INIT_H + +enum { + MEM_TIMINGS_MSR_COUNT = 4, +}; + +/* These are the ratio's for configuring ARM clock */ +struct arm_clk_ratios { + unsigned arm_freq_mhz; /* Frequency of ARM core in MHz */ + + unsigned apll_mdiv; + unsigned apll_pdiv; + unsigned apll_sdiv; + + unsigned arm2_ratio; + unsigned apll_ratio; + unsigned pclk_dbg_ratio; + unsigned atb_ratio; + unsigned periph_ratio; + unsigned acp_ratio; + unsigned cpud_ratio; + unsigned arm_ratio; +}; + +/* These are the memory timings for a particular memory type and speed */ +struct mem_timings { + enum mem_manuf mem_manuf; /* Memory manufacturer */ + enum ddr_mode mem_type; /* Memory type */ + unsigned frequency_mhz; /* Frequency of memory in MHz */ + + /* Here follow the timing parameters for the selected memory */ + uint8_t apll_mdiv; + uint8_t apll_pdiv; + uint8_t apll_sdiv; + uint8_t mpll_mdiv; + uint8_t mpll_pdiv; + uint8_t mpll_sdiv; + uint8_t cpll_mdiv; + uint8_t cpll_pdiv; + uint8_t cpll_sdiv; + uint8_t gpll_pdiv; + uint16_t gpll_mdiv; + uint8_t gpll_sdiv; + uint8_t epll_mdiv; + uint8_t epll_pdiv; + uint8_t epll_sdiv; + uint8_t vpll_mdiv; + uint8_t vpll_pdiv; + uint8_t vpll_sdiv; + uint8_t bpll_mdiv; + uint8_t bpll_pdiv; + uint8_t bpll_sdiv; + uint8_t use_bpll; /* 1 to use BPLL for cdrex, 0 to use MPLL */ + uint8_t pclk_cdrex_ratio; + unsigned direct_cmd_msr[MEM_TIMINGS_MSR_COUNT]; + + unsigned timing_ref; + unsigned timing_row; + unsigned timing_data; + unsigned timing_power; + + /* DQS, DQ, DEBUG offsets */ + unsigned phy0_dqs; + unsigned phy1_dqs; + unsigned phy0_dq; + unsigned phy1_dq; + uint8_t phy0_tFS; + uint8_t phy1_tFS; + uint8_t phy0_pulld_dqs; + uint8_t phy1_pulld_dqs; + + uint8_t lpddr3_ctrl_phy_reset; + uint8_t ctrl_start_point; + uint8_t ctrl_inc; + uint8_t ctrl_start; + uint8_t ctrl_dll_on; + uint8_t ctrl_ref; + + uint8_t ctrl_force; + uint8_t ctrl_rdlat; + uint8_t ctrl_bstlen; + + uint8_t fp_resync; + uint8_t iv_size; + uint8_t dfi_init_start; + uint8_t aref_en; + + uint8_t rd_fetch; + + uint8_t zq_mode_dds; + uint8_t zq_mode_term; + uint8_t zq_mode_noterm; /* 1 to allow termination disable */ + + unsigned memcontrol; + unsigned memconfig; + + unsigned membaseconfig0; + unsigned membaseconfig1; + unsigned prechconfig_tp_cnt; + unsigned dpwrdn_cyc; + unsigned dsref_cyc; + unsigned concontrol; + /* Channel and Chip Selection */ + uint8_t dmc_channels; /* number of memory channels */ + uint8_t chips_per_channel; /* number of chips per channel */ + uint8_t chips_to_configure; /* number of chips to configure */ + uint8_t send_zq_init; /* 1 to send this command */ + unsigned impedance; /* drive strength impedeance */ + uint8_t gate_leveling_enable; /* check gate leveling is enabled */ +}; + +/** + * Get the correct memory timings for our selected memory type and speed. + * + * This function can be called from SPL or the main U-Boot. + * + * @return pointer to the memory timings that we should use + */ +struct mem_timings *clock_get_mem_timings(void); + +/* + * Initialize clock for the device + */ +void system_clock_init(void); +#endif diff --git a/src/cpu/samsung/exynos5250/cpu.h b/src/cpu/samsung/exynos5250/cpu.h new file mode 100644 index 0000000000..f6d7c654d7 --- /dev/null +++ b/src/cpu/samsung/exynos5250/cpu.h @@ -0,0 +1,134 @@ +/* + * (C) Copyright 2010 Samsung Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#ifndef _EXYNOS5250_CPU_H +#define _EXYNOS5250_CPU_H + +#include <cpu/samsung/exynos-common/cpu.h> + +/* EXYNOS5 */ +#define EXYNOS5_GPIO_PART6_BASE 0x03860000 /* Z<6:0> */ +#define EXYNOS5_PRO_ID 0x10000000 +#define EXYNOS5_CLOCK_BASE 0x10010000 +#define EXYNOS5_POWER_BASE 0x10040000 +#define EXYNOS5_SWRESET 0x10040400 +#define EXYNOS5_SYSREG_BASE 0x10050000 +#define EXYNOS5_TZPC1_DECPROT1SET 0x10110810 +#define EXYNOS5_MULTI_CORE_TIMER_BASE 0x101C0000 +#define EXYNOS5_WATCHDOG_BASE 0x101D0000 +#define EXYNOS5_ACE_SFR_BASE 0x10830000 +#define EXYNOS5_DMC_PHY0_BASE 0x10C00000 +#define EXYNOS5_DMC_PHY1_BASE 0x10C10000 +#define EXYNOS5_GPIO_PART4_BASE 0x10D10000 /* V00..V37 */ +#define EXYNOS5_GPIO_PART5_BASE 0x10D100C0 /* V40..V47 */ +#define EXYNOS5_DMC_CTRL_BASE 0x10DD0000 +#define EXYNOS5_GPIO_PART1_BASE 0x11400000 /* A00..Y67 */ +#define EXYNOS5_GPIO_PART2_BASE 0x11400c00 /* X00..X37 */ +#define EXYNOS5_USB_HOST_EHCI_BASE 0x12110000 +#define EXYNOS5_USBPHY_BASE 0x12130000 +#define EXYNOS5_USBOTG_BASE 0x12140000 + +#ifndef CONFIG_OF_CONTROL +#define EXYNOS5_MMC_BASE 0x12200000 +#define EXYNOS5_MSHC_BASE 0x12240000 +#endif + +#define EXYNOS5_SROMC_BASE 0x12250000 +#define EXYNOS5_UART_BASE 0x12C00000 + +#define EXYNOS5_SPI1_BASE 0x12D30000 +#ifndef CONFIG_OF_CONTROL +#define EXYNOS5_I2C_BASE 0x12C60000 +#define EXYNOS5_SPI_BASE 0x12D20000 +#define EXYNOS5_PWMTIMER_BASE 0x12DD0000 +#define EXYNOS5_SPI_ISP_BASE 0x131A0000 +#endif +#define EXYNOS5_I2S_BASE 0x12D60000 +#define EXYNOS5_GPIO_PART3_BASE 0x13400000 /* E00..H17 */ +#define EXYNOS5_FIMD_BASE 0x14400000 +#define EXYNOS5_DISP1_CTRL_BASE 0x14420000 +#define EXYNOS5_MIPI_DSI1_BASE 0x14500000 + +#define EXYNOS5_ADC_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS5_MODEM_BASE DEVICE_NOT_AVAILABLE + +/* Compatibility defines */ +#define EXYNOS_POWER_BASE EXYNOS5_POWER_BASE + +/* Marker values stored at the bottom of IRAM stack by SPL */ +#define EXYNOS5_SPL_MARKER 0xb004f1a9 /* hexspeak word: bootflag */ + +/* Distance between each Trust Zone PC register set */ +#define TZPC_BASE_OFFSET 0x10000 + +#ifndef __ASSEMBLY__ + +#define SAMSUNG_BASE(device, base) \ +static inline unsigned int samsung_get_base_##device(void) \ +{ \ + return cpu_is_exynos5() ? EXYNOS5_##base : 0; \ +} + +SAMSUNG_BASE(adc, ADC_BASE) +SAMSUNG_BASE(clock, CLOCK_BASE) +SAMSUNG_BASE(ace_sfr, ACE_SFR_BASE) +SAMSUNG_BASE(dsim, MIPI_DSI1_BASE) +SAMSUNG_BASE(disp_ctrl, DISP1_CTRL_BASE) +SAMSUNG_BASE(fimd, FIMD_BASE) +SAMSUNG_BASE(gpio_part1, GPIO_PART1_BASE) +SAMSUNG_BASE(gpio_part2, GPIO_PART2_BASE) +SAMSUNG_BASE(gpio_part3, GPIO_PART3_BASE) +SAMSUNG_BASE(gpio_part4, GPIO_PART4_BASE) +SAMSUNG_BASE(gpio_part5, GPIO_PART5_BASE) +SAMSUNG_BASE(gpio_part6, GPIO_PART6_BASE) +SAMSUNG_BASE(pro_id, PRO_ID) + +#ifndef CONFIG_OF_CONTROL +SAMSUNG_BASE(mmc, MMC_BASE) +SAMSUNG_BASE(mshci, MSHC_BASE) +#endif + +SAMSUNG_BASE(modem, MODEM_BASE) +SAMSUNG_BASE(sromc, SROMC_BASE) +SAMSUNG_BASE(swreset, SWRESET) +SAMSUNG_BASE(sysreg, SYSREG_BASE) +SAMSUNG_BASE(timer, PWMTIMER_BASE) +SAMSUNG_BASE(uart, UART_BASE) +SAMSUNG_BASE(usb_phy, USBPHY_BASE) +SAMSUNG_BASE(usb_otg, USBOTG_BASE) +SAMSUNG_BASE(watchdog, WATCHDOG_BASE) +SAMSUNG_BASE(power, POWER_BASE) +SAMSUNG_BASE(i2s, I2S_BASE) +SAMSUNG_BASE(spi1, SPI1_BASE) +#ifndef CONFIG_OF_CONTROL +SAMSUNG_BASE(i2c, I2C_BASE) +SAMSUNG_BASE(spi, SPI_BASE) +SAMSUNG_BASE(spi_isp, SPI_ISP_BASE) +#endif +#endif + +#define EXYNOS5_SPI_NUM_CONTROLLERS 5 +#define EXYNOS_I2C_MAX_CONTROLLERS 8 + +/* helper function to map mmio address to peripheral id */ +enum periph_id exynos5_get_periph_id(unsigned base_addr); + +#endif /* _EXYNOS5250_CPU_H */ diff --git a/src/cpu/samsung/exynos5250/dmc.h b/src/cpu/samsung/exynos5250/dmc.h new file mode 100644 index 0000000000..d1dfbb162f --- /dev/null +++ b/src/cpu/samsung/exynos5250/dmc.h @@ -0,0 +1,211 @@ +#ifndef __DMC_H__ +#define __DMC_H__ + +#ifndef __ASSEMBLER__ +struct exynos5_dmc { + unsigned int concontrol; + unsigned int memcontrol; + unsigned int memconfig0; + unsigned int memconfig1; + unsigned int directcmd; + unsigned int prechconfig; + unsigned int phycontrol0; + unsigned char res1[0xc]; + unsigned int pwrdnconfig; + unsigned int timingpzq; + unsigned int timingref; + unsigned int timingrow; + unsigned int timingdata; + unsigned int timingpower; + unsigned int phystatus; + unsigned char res2[0x4]; + unsigned int chipstatus_ch0; + unsigned int chipstatus_ch1; + unsigned char res3[0x4]; + unsigned int mrstatus; + unsigned char res4[0x8]; + unsigned int qoscontrol0; + unsigned char resr5[0x4]; + unsigned int qoscontrol1; + unsigned char res6[0x4]; + unsigned int qoscontrol2; + unsigned char res7[0x4]; + unsigned int qoscontrol3; + unsigned char res8[0x4]; + unsigned int qoscontrol4; + unsigned char res9[0x4]; + unsigned int qoscontrol5; + unsigned char res10[0x4]; + unsigned int qoscontrol6; + unsigned char res11[0x4]; + unsigned int qoscontrol7; + unsigned char res12[0x4]; + unsigned int qoscontrol8; + unsigned char res13[0x4]; + unsigned int qoscontrol9; + unsigned char res14[0x4]; + unsigned int qoscontrol10; + unsigned char res15[0x4]; + unsigned int qoscontrol11; + unsigned char res16[0x4]; + unsigned int qoscontrol12; + unsigned char res17[0x4]; + unsigned int qoscontrol13; + unsigned char res18[0x4]; + unsigned int qoscontrol14; + unsigned char res19[0x4]; + unsigned int qoscontrol15; + unsigned char res20[0x14]; + unsigned int ivcontrol; + unsigned int wrtra_config; + unsigned int rdlvl_config; + unsigned char res21[0x8]; + unsigned int brbrsvconfig; + unsigned int brbqosconfig; + unsigned int membaseconfig0; + unsigned int membaseconfig1; + unsigned char res22[0xc]; + unsigned int wrlvl_config; + unsigned char res23[0xc]; + unsigned int perevcontrol; + unsigned int perev0config; + unsigned int perev1config; + unsigned int perev2config; + unsigned int perev3config; + unsigned char res24[0xdebc]; + unsigned int pmnc_ppc_a; + unsigned char res25[0xc]; + unsigned int cntens_ppc_a; + unsigned char res26[0xc]; + unsigned int cntenc_ppc_a; + unsigned char res27[0xc]; + unsigned int intens_ppc_a; + unsigned char res28[0xc]; + unsigned int intenc_ppc_a; + unsigned char res29[0xc]; + unsigned int flag_ppc_a; + unsigned char res30[0xac]; + unsigned int ccnt_ppc_a; + unsigned char res31[0xc]; + unsigned int pmcnt0_ppc_a; + unsigned char res32[0xc]; + unsigned int pmcnt1_ppc_a; + unsigned char res33[0xc]; + unsigned int pmcnt2_ppc_a; + unsigned char res34[0xc]; + unsigned int pmcnt3_ppc_a; +}; + +struct exynos5_phy_control { + unsigned int phy_con0; + unsigned int phy_con1; + unsigned int phy_con2; + unsigned int phy_con3; + unsigned int phy_con4; + unsigned char res1[4]; + unsigned int phy_con6; + unsigned char res2[4]; + unsigned int phy_con8; + unsigned int phy_con9; + unsigned int phy_con10; + unsigned char res3[4]; + unsigned int phy_con12; + unsigned int phy_con13; + unsigned int phy_con14; + unsigned int phy_con15; + unsigned int phy_con16; + unsigned char res4[4]; + unsigned int phy_con17; + unsigned int phy_con18; + unsigned int phy_con19; + unsigned int phy_con20; + unsigned int phy_con21; + unsigned int phy_con22; + unsigned int phy_con23; + unsigned int phy_con24; + unsigned int phy_con25; + unsigned int phy_con26; + unsigned int phy_con27; + unsigned int phy_con28; + unsigned int phy_con29; + unsigned int phy_con30; + unsigned int phy_con31; + unsigned int phy_con32; + unsigned int phy_con33; + unsigned int phy_con34; + unsigned int phy_con35; + unsigned int phy_con36; + unsigned int phy_con37; + unsigned int phy_con38; + unsigned int phy_con39; + unsigned int phy_con40; + unsigned int phy_con41; + unsigned int phy_con42; +}; + +enum ddr_mode { + DDR_MODE_DDR2, + DDR_MODE_DDR3, + DDR_MODE_LPDDR2, + DDR_MODE_LPDDR3, + + DDR_MODE_COUNT, +}; + +enum mem_manuf { + MEM_MANUF_AUTODETECT, + MEM_MANUF_ELPIDA, + MEM_MANUF_SAMSUNG, + + MEM_MANUF_COUNT, +}; + +/* CONCONTROL register fields */ +#define CONCONTROL_DFI_INIT_START_SHIFT 28 +#define CONCONTROL_RD_FETCH_SHIFT 12 +#define CONCONTROL_RD_FETCH_MASK (0x7 << CONCONTROL_RD_FETCH_SHIFT) +#define CONCONTROL_AREF_EN_SHIFT 5 + +/* PRECHCONFIG register field */ +#define PRECHCONFIG_TP_CNT_SHIFT 24 + +/* PWRDNCONFIG register field */ +#define PWRDNCONFIG_DPWRDN_CYC_SHIFT 0 +#define PWRDNCONFIG_DSREF_CYC_SHIFT 16 + +/* PHY_CON0 register fields */ +#define PHY_CON0_T_WRRDCMD_SHIFT 17 +#define PHY_CON0_T_WRRDCMD_MASK (0x7 << PHY_CON0_T_WRRDCMD_SHIFT) +#define PHY_CON0_CTRL_DDR_MODE_SHIFT 11 + +/* PHY_CON1 register fields */ +#define PHY_CON1_RDLVL_RDDATA_ADJ_SHIFT 0 + +/* PHY_CON12 register fields */ +#define PHY_CON12_CTRL_START_POINT_SHIFT 24 +#define PHY_CON12_CTRL_INC_SHIFT 16 +#define PHY_CON12_CTRL_FORCE_SHIFT 8 +#define PHY_CON12_CTRL_START_SHIFT 6 +#define PHY_CON12_CTRL_START_MASK (1 << PHY_CON12_CTRL_START_SHIFT) +#define PHY_CON12_CTRL_DLL_ON_SHIFT 5 +#define PHY_CON12_CTRL_DLL_ON_MASK (1 << PHY_CON12_CTRL_DLL_ON_SHIFT) +#define PHY_CON12_CTRL_REF_SHIFT 1 + +/* PHY_CON16 register fields */ +#define PHY_CON16_ZQ_MODE_DDS_SHIFT 24 +#define PHY_CON16_ZQ_MODE_DDS_MASK (0x7 << PHY_CON16_ZQ_MODE_DDS_SHIFT) + +#define PHY_CON16_ZQ_MODE_TERM_SHIFT 21 +#define PHY_CON16_ZQ_MODE_TERM_MASK (0x7 << PHY_CON16_ZQ_MODE_TERM_SHIFT) + +#define PHY_CON16_ZQ_MODE_NOTERM_MASK (1 << 19) + +/* PHY_CON42 register fields */ +#define PHY_CON42_CTRL_BSTLEN_SHIFT 8 +#define PHY_CON42_CTRL_BSTLEN_MASK (0xff << PHY_CON42_CTRL_BSTLEN_SHIFT) + +#define PHY_CON42_CTRL_RDLAT_SHIFT 0 +#define PHY_CON42_CTRL_RDLAT_MASK (0x1f << PHY_CON42_CTRL_RDLAT_SHIFT) + +#endif +#endif diff --git a/src/cpu/samsung/exynos5250/dsim.h b/src/cpu/samsung/exynos5250/dsim.h new file mode 100644 index 0000000000..38a4c988ea --- /dev/null +++ b/src/cpu/samsung/exynos5250/dsim.h @@ -0,0 +1,108 @@ +/* + * (C) Copyright 2012 Samsung Electronics + * Register map for Exynos5 MIPI-DSIM + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __EXYNOS5_DSIM_H__ +#define __EXYNOS5_DSIM_H__ + +/* DSIM register map */ +struct exynos5_dsim { + unsigned int status; + unsigned int swrst; + unsigned int clkctrl; + unsigned int timeout; + unsigned int config; + unsigned int escmode; + unsigned int mdresol; + unsigned int mvporch; + unsigned int mhporch; + unsigned int msync; + unsigned int sdresol; + unsigned int intsrc; + unsigned int intmsk; + unsigned int pkthdr; + unsigned int payload; + unsigned int rxfifo; + unsigned int res1; + unsigned int fifoctrl; + unsigned int res2; + unsigned int pllctrl; + unsigned int plltmr; + unsigned int phyacchr; + unsigned int phyacchr1; +}; + +#define ENABLE 1 +#define DISABLE 0 + +#define DSIM_SWRST (1 << 0) +#define NUM_OF_DAT_LANE_IS_FOUR (3 << 5) +#define DATA_LANE_0_EN (1 << 0) +#define DATA_LANE_1_EN (1 << 1) +#define DATA_LANE_2_EN (1 << 2) +#define DATA_LANE_3_EN (1 << 3) +#define CLK_LANE_EN (1 << 4) +#define ENABLE_ALL_DATA_LANE DATA_LANE_0_EN | \ + DATA_LANE_1_EN | \ + DATA_LANE_2_EN | \ + DATA_LANE_3_EN +#define MAIN_PIX_FORMAT_OFFSET 12 +#define RGB_565_16_BIT 0x4 +#define VIDEO_MODE (1 << 25) +#define BURST_MODE (1 << 26) + + +#define DSIM_PHYACCHR_AFC_EN (1 << 14) +#define DSIM_PHYACCHR_AFC_CTL_OFFSET 5 + +#define DSIM_PLLCTRL_PMS_OFFSET 1 +#define DSIM_FREQ_BAND_OFFSET 24 + +#define LANE_ESC_CLK_EN_ALL (0x1f << 19) +#define BYTE_CLK_EN (1 << 24) +#define DSIM_ESC_CLK_EN (1 << 28) +#define TXREQUEST_HS_CLK_ON (1 << 31) + +#define LP_MODE_ENABLE (1 << 7) +#define STOP_STATE_CNT_OFFSET 21 + +#define MAIN_VBP_OFFSET 0 +#define STABLE_VFP_OFFSET 16 +#define CMD_ALLOW_OFFSET 28 + +#define MAIN_HBP_OFFSET 0 +#define MAIN_HFP_OFFSET 16 + +#define MAIN_HSA_OFFSET 0 +#define MAIN_VSA_OFFSET 22 + +#define MAIN_STANDBY (1 << 31) +#define MAIN_VRESOL_OFFSET 16 +#define MAIN_HRESOL_OFFSET 0 + +#define SFR_FIFO_EMPTY (1 << 29) + +#define DSIM_PLL_EN_SHIFT (1 << 23) +#define PLL_STABLE (1 << 31) + +#define DSIM_STOP_STATE_DAT(x) (((x) & 0xf) << 0) +#define DSIM_STOP_STATE_CLK (1 << 8) +#define DSIM_TX_READY_HS_CLK (1 << 10) + +#endif diff --git a/src/cpu/samsung/exynos5250/ehci-s5p.h b/src/cpu/samsung/exynos5250/ehci-s5p.h new file mode 100644 index 0000000000..56abb60aee --- /dev/null +++ b/src/cpu/samsung/exynos5250/ehci-s5p.h @@ -0,0 +1,66 @@ +/* + * SAMSUNG S5P USB HOST EHCI Controller + * + * Copyright (C) 2012 Samsung Electronics Co.Ltd + * Vivek Gautam <gautam.vivek@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#ifndef __ASM_ARM_ARCH_EXYNOS5_EHCI_S5P_H__ +#define __ASM_ARM_ARCH_EXYNOS5_EHCI_S5P_H__ + +#define CLK_24MHZ 5 + +#define HOST_CTRL0_PHYSWRSTALL (1 << 31) +#define HOST_CTRL0_COMMONON_N (1 << 9) +#define HOST_CTRL0_SIDDQ (1 << 6) +#define HOST_CTRL0_FORCESLEEP (1 << 5) +#define HOST_CTRL0_FORCESUSPEND (1 << 4) +#define HOST_CTRL0_WORDINTERFACE (1 << 3) +#define HOST_CTRL0_UTMISWRST (1 << 2) +#define HOST_CTRL0_LINKSWRST (1 << 1) +#define HOST_CTRL0_PHYSWRST (1 << 0) + +#define HOST_CTRL0_FSEL_MASK (7 << 16) + +#define EHCICTRL_ENAINCRXALIGN (1 << 29) +#define EHCICTRL_ENAINCR4 (1 << 28) +#define EHCICTRL_ENAINCR8 (1 << 27) +#define EHCICTRL_ENAINCR16 (1 << 26) + +/* Register map for PHY control */ +struct usb_phy { + unsigned int usbphyctrl0; + unsigned int usbphytune0; + unsigned int reserved1[2]; + unsigned int hsicphyctrl1; + unsigned int hsicphytune1; + unsigned int reserved2[2]; + unsigned int hsicphyctrl2; + unsigned int hsicphytune2; + unsigned int reserved3[2]; + unsigned int ehcictrl; + unsigned int ohcictrl; + unsigned int usbotgsys; + unsigned int reserved4; + unsigned int usbotgtune; +}; + +/* Switch on the VBUS power. */ +int board_usb_vbus_init(void); + +#endif /* __ASM_ARM_ARCH_EXYNOS5_EHCI_S5P_H__ */ diff --git a/src/cpu/samsung/exynos5250/exynos-cpufreq.h b/src/cpu/samsung/exynos5250/exynos-cpufreq.h new file mode 100644 index 0000000000..1c28e77ea4 --- /dev/null +++ b/src/cpu/samsung/exynos5250/exynos-cpufreq.h @@ -0,0 +1,54 @@ +/* + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS - CPU frequency scaling support + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* Define various levels of ARM frequency */ +enum cpufreq_level { + CPU_FREQ_L200, /* 200 MHz */ + CPU_FREQ_L300, /* 300 MHz */ + CPU_FREQ_L400, /* 400 MHz */ + CPU_FREQ_L500, /* 500 MHz */ + CPU_FREQ_L600, /* 600 MHz */ + CPU_FREQ_L700, /* 700 MHz */ + CPU_FREQ_L800, /* 800 MHz */ + CPU_FREQ_L900, /* 900 MHz */ + CPU_FREQ_L1000, /* 1000 MHz */ + CPU_FREQ_L1100, /* 1100 MHz */ + CPU_FREQ_L1200, /* 1200 MHz */ + CPU_FREQ_L1300, /* 1300 MHz */ + CPU_FREQ_L1400, /* 1400 MHz */ + CPU_FREQ_L1500, /* 1500 MHz */ + CPU_FREQ_L1600, /* 1600 MHz */ + CPU_FREQ_L1700, /* 1700 MHz */ + CPU_FREQ_LCOUNT, +}; + +/* + * Initialize ARM frequency scaling + * + * @param blob FDT blob + * @return int value, 0 for success + */ +int exynos5250_cpufreq_init(const void *blob); + +/* + * Switch ARM frequency to new level + * + * @param new_freq_level enum cpufreq_level, states new frequency + * @return int value, 0 for success + */ +int exynos5250_set_frequency(enum cpufreq_level new_freq_level); diff --git a/src/cpu/samsung/exynos5250/exynos-tmu.h b/src/cpu/samsung/exynos5250/exynos-tmu.h new file mode 100644 index 0000000000..ad9e394456 --- /dev/null +++ b/src/cpu/samsung/exynos5250/exynos-tmu.h @@ -0,0 +1,82 @@ +/* + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Akshay Saraswat <Akshay.s@samsung.com> + * + * EXYNOS - Thermal Management Unit + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_THERMAL_H +#define __ASM_ARCH_THERMAL_H + +struct tmu_reg { + unsigned triminfo; + unsigned rsvd1; + unsigned rsvd2; + unsigned rsvd3; + unsigned rsvd4; + unsigned triminfo_control; + unsigned rsvd5; + unsigned rsvd6; + unsigned tmu_control; + unsigned rsvd7; + unsigned tmu_status; + unsigned sampling_internal; + unsigned counter_value0; + unsigned counter_value1; + unsigned rsvd8; + unsigned rsvd9; + unsigned current_temp; + unsigned rsvd10; + unsigned rsvd11; + unsigned rsvd12; + unsigned threshold_temp_rise; + unsigned threshold_temp_fall; + unsigned rsvd13; + unsigned rsvd14; + unsigned past_temp3_0; + unsigned past_temp7_4; + unsigned past_temp11_8; + unsigned past_temp15_12; + unsigned inten; + unsigned intstat; + unsigned intclear; + unsigned rsvd15; + unsigned emul_con; +}; + +enum tmu_status_t { + TMU_STATUS_INIT = 0, + TMU_STATUS_NORMAL, + TMU_STATUS_WARNING, + TMU_STATUS_TRIPPED, +}; + +/* + * Monitors status of the TMU device and exynos temperature + * + * @param temp pointer to the current temperature value + * @return enum tmu_status_t value, code indicating event to execute + * and -1 on error + */ +enum tmu_status_t tmu_monitor(int *temp); + +/* + * Initialize TMU device + * + * @param blob FDT blob + * @return int value, 0 for success + */ +int tmu_init(const void *blob); +#endif diff --git a/src/cpu/samsung/exynos5250/fet.h b/src/cpu/samsung/exynos5250/fet.h new file mode 100644 index 0000000000..e76bcbfc7c --- /dev/null +++ b/src/cpu/samsung/exynos5250/fet.h @@ -0,0 +1,25 @@ +/* + * Copyright (c) 2012 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + */ + +#ifndef __ASM_ARM_ARCH_EXYNOS5_FET_H +#define __ASM_ARM_ARCH_EXYNOS5_FET_H + +/* The FET IDs for TPS65090 PMU chip. */ +enum { + FET_ID_BL = 1 + FET_ID_VIDEO, + FET_ID_WWAN, + FET_ID_SDCARD, + FET_ID_CAMOUT, + FET_ID_LCD, + FET_ID_TS +}; + +#endif diff --git a/src/cpu/samsung/exynos5250/fimd.h b/src/cpu/samsung/exynos5250/fimd.h new file mode 100644 index 0000000000..a46ad5a033 --- /dev/null +++ b/src/cpu/samsung/exynos5250/fimd.h @@ -0,0 +1,137 @@ +/* + * (C) Copyright 2012 Samsung Electronics + * Register map for Exynos5 FIMD + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __EXYNOS5_FIMD_H__ +#define __EXYNOS5_FIMD_H__ + +/* FIMD register map */ +struct exynos5_fimd { + /* This is an incomplete list. Add registers as and when required */ + unsigned int vidcon0; + unsigned char res1[0x1c]; + unsigned int wincon0; + unsigned int wincon1; + unsigned int wincon2; + unsigned int wincon3; + unsigned int wincon4; + unsigned int shadowcon; + unsigned char res2[0x8]; + unsigned int vidosd0a; + unsigned int vidosd0b; + unsigned int vidosd0c; + unsigned char res3[0x54]; + unsigned int vidw00add0b0; + unsigned char res4[0x2c]; + unsigned int vidw00add1b0; + unsigned char res5[0x2c]; + unsigned int vidw00add2; + unsigned char res6[0x3c]; + unsigned int w1keycon0; + unsigned int w1keycon1; + unsigned int w2keycon0; + unsigned int w2keycon1; + unsigned int w3keycon0; + unsigned int w3keycon1; + unsigned int w4keycon0; + unsigned int w4keycon1; + unsigned char res7[0x20]; + unsigned int win0map; + unsigned char res8[0xdc]; + unsigned int blendcon; + unsigned char res9[0x18]; + unsigned int dpclkcon; +}; + +#define W0_SHADOW_PROTECT (0x1 << 10) +#define COMPKEY_F 0xffffff +#define ENVID_F_ON (0x1 << 0) +#define ENVID_ON (0x1 << 1) +#define CLKVAL_F 0xb +#define CLKVAL_F_OFFSET 6 + +/* + * Structure containing display panel specific data for FIMD + */ +struct exynos5_fimd_panel { + unsigned int is_dp:1; /* Display Panel interface is eDP */ + unsigned int is_mipi:1; /* Display Panel interface is MIPI */ + unsigned int fixvclk:2; /* VCLK hold scheme at data underflow */ + + /* + * Polarity of the VCLK active edge + * 0-falling + * 1-rising + */ + unsigned int ivclk:1; + unsigned int clkval_f; /* Divider to create pixel clock */ + + unsigned int upper_margin; /* Vertical Backporch */ + unsigned int lower_margin; /* Vertical frontporch */ + unsigned int vsync; /* Vertical Sync Pulse Width */ + unsigned int left_margin; /* Horizantal Backporch */ + unsigned int right_margin; /* Horizontal Frontporch */ + unsigned int hsync; /* Horizontal Sync Pulse Width */ + unsigned int xres; /* X Resolution */ + unsigned int yres; /* Y Resopultion */ +}; + +/* LCDIF Register Map */ +struct exynos5_disp_ctrl { + unsigned int vidout_con; + unsigned int vidcon1; + unsigned char res1[0x8]; + unsigned int vidtcon0; + unsigned int vidtcon1; + unsigned int vidtcon2; + unsigned int vidtcon3; + unsigned char res2[0x184]; + unsigned int trigcon; +}; + +#define VCLK_RISING_EDGE (1 << 7) +#define VCLK_RUNNING (1 << 9) + +#define CHANNEL0_EN (1 << 0) + +#define VSYNC_PULSE_WIDTH_VAL 0x3 +#define VSYNC_PULSE_WIDTH_OFFSET 0 +#define V_FRONT_PORCH_VAL 0x3 +#define V_FRONT_PORCH_OFFSET 8 +#define V_BACK_PORCH_VAL 0x3 +#define V_BACK_PORCH_OFFSET 16 + +#define HSYNC_PULSE_WIDTH_VAL 0x3 +#define HSYNC_PULSE_WIDTH_OFFSET 0 +#define H_FRONT_PORCH_VAL 0x3 +#define H_FRONT_PORCH_OFFSET 8 +#define H_BACK_PORCH_VAL 0x3 +#define H_BACK_PORCH_OFFSET 16 + +#define HOZVAL_OFFSET 0 +#define LINEVAL_OFFSET 11 + +#define BPPMODE_F_RGB_16BIT_565 0x5 +#define BPPMODE_F_OFFSET 2 +#define ENWIN_F_ENABLE (1 << 0) +#define HALF_WORD_SWAP_EN (1 << 16) + +#define OSD_RIGHTBOTX_F_OFFSET 11 +#define OSD_RIGHTBOTY_F_OFFSET 0 +#endif diff --git a/src/cpu/samsung/exynos5250/gpio.h b/src/cpu/samsung/exynos5250/gpio.h new file mode 100644 index 0000000000..b45cf5cea4 --- /dev/null +++ b/src/cpu/samsung/exynos5250/gpio.h @@ -0,0 +1,482 @@ +/* + * (C) Copyright 2010 Samsung Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef EXYNOS5250_GPIO_H_ +#define EXYNOS5250_GPIO_H_ + +#include <cpu/samsung/exynos-common/gpio.h> + +struct exynos5_gpio_part1 { + struct s5p_gpio_bank a0; + struct s5p_gpio_bank a1; + struct s5p_gpio_bank a2; + struct s5p_gpio_bank b0; + struct s5p_gpio_bank b1; + struct s5p_gpio_bank b2; + struct s5p_gpio_bank b3; + struct s5p_gpio_bank c0; + struct s5p_gpio_bank c1; + struct s5p_gpio_bank c2; + struct s5p_gpio_bank c3; + struct s5p_gpio_bank d0; + struct s5p_gpio_bank d1; + struct s5p_gpio_bank y0; + struct s5p_gpio_bank y1; + struct s5p_gpio_bank y2; + struct s5p_gpio_bank y3; + struct s5p_gpio_bank y4; + struct s5p_gpio_bank y5; + struct s5p_gpio_bank y6; +}; + +struct exynos5_gpio_part2 { + struct s5p_gpio_bank x0; + struct s5p_gpio_bank x1; + struct s5p_gpio_bank x2; + struct s5p_gpio_bank x3; +}; + +struct exynos5_gpio_part3 { + struct s5p_gpio_bank e0; + struct s5p_gpio_bank e1; + struct s5p_gpio_bank f0; + struct s5p_gpio_bank f1; + struct s5p_gpio_bank g0; + struct s5p_gpio_bank g1; + struct s5p_gpio_bank g2; + struct s5p_gpio_bank h0; + struct s5p_gpio_bank h1; +}; + +struct exynos5_gpio_part4 { + struct s5p_gpio_bank v0; + struct s5p_gpio_bank v1; + struct s5p_gpio_bank v2; + struct s5p_gpio_bank v3; +}; + +struct exynos5_gpio_part5 { + struct s5p_gpio_bank v4; +}; + +struct exynos5_gpio_part6 { + struct s5p_gpio_bank z; +}; + +enum { + /* GPIO banks are split into this many parts */ + EXYNOS_GPIO_NUM_PARTS = 6 +}; + +/* A list of valid GPIO numbers for the asm-generic/gpio.h interface */ +enum exynos5_gpio_pin { + /* GPIO_PART1_STARTS */ + GPIO_A00, + GPIO_A01, + GPIO_A02, + GPIO_A03, + GPIO_A04, + GPIO_A05, + GPIO_A06, + GPIO_A07, + GPIO_A10, + GPIO_A11, + GPIO_A12, + GPIO_A13, + GPIO_A14, + GPIO_A15, + GPIO_A16, + GPIO_A17, + GPIO_A20, + GPIO_A21, + GPIO_A22, + GPIO_A23, + GPIO_A24, + GPIO_A25, + GPIO_A26, + GPIO_A27, + GPIO_B00, /* 0x18 */ + GPIO_B01, + GPIO_B02, + GPIO_B03, + GPIO_B04, + GPIO_B05, + GPIO_B06, + GPIO_B07, + GPIO_B10, + GPIO_B11, + GPIO_B12, + GPIO_B13, + GPIO_B14, + GPIO_B15, + GPIO_B16, + GPIO_B17, + GPIO_B20, + GPIO_B21, + GPIO_B22, + GPIO_B23, + GPIO_B24, + GPIO_B25, + GPIO_B26, + GPIO_B27, + GPIO_B30, + GPIO_B31, + GPIO_B32, + GPIO_B33, + GPIO_B34, + GPIO_B35, + GPIO_B36, + GPIO_B37, + GPIO_C00, /* 0x38 */ + GPIO_C01, + GPIO_C02, + GPIO_C03, + GPIO_C04, + GPIO_C05, + GPIO_C06, + GPIO_C07, + GPIO_C10, + GPIO_C11, + GPIO_C12, + GPIO_C13, + GPIO_C14, + GPIO_C15, + GPIO_C16, + GPIO_C17, + GPIO_C20, + GPIO_C21, + GPIO_C22, + GPIO_C23, + GPIO_C24, + GPIO_C25, + GPIO_C26, + GPIO_C27, + GPIO_C30, + GPIO_C31, + GPIO_C32, + GPIO_C33, + GPIO_C34, + GPIO_C35, + GPIO_C36, + GPIO_C37, + GPIO_D00, /* 0x58 */ + GPIO_D01, + GPIO_D02, + GPIO_D03, + GPIO_D04, + GPIO_D05, + GPIO_D06, + GPIO_D07, + GPIO_D10, + GPIO_D11, + GPIO_D12, + GPIO_D13, + GPIO_D14, + GPIO_D15, + GPIO_D16, + GPIO_D17, + GPIO_Y00, /* 0x68 */ + GPIO_Y01, + GPIO_Y02, + GPIO_Y03, + GPIO_Y04, + GPIO_Y05, + GPIO_Y06, + GPIO_Y07, + GPIO_Y10, + GPIO_Y11, + GPIO_Y12, + GPIO_Y13, + GPIO_Y14, + GPIO_Y15, + GPIO_Y16, + GPIO_Y17, + GPIO_Y20, + GPIO_Y21, + GPIO_Y22, + GPIO_Y23, + GPIO_Y24, + GPIO_Y25, + GPIO_Y26, + GPIO_Y27, + GPIO_Y30, + GPIO_Y31, + GPIO_Y32, + GPIO_Y33, + GPIO_Y34, + GPIO_Y35, + GPIO_Y36, + GPIO_Y37, + GPIO_Y40, + GPIO_Y41, + GPIO_Y42, + GPIO_Y43, + GPIO_Y44, + GPIO_Y45, + GPIO_Y46, + GPIO_Y47, + GPIO_Y50, + GPIO_Y51, + GPIO_Y52, + GPIO_Y53, + GPIO_Y54, + GPIO_Y55, + GPIO_Y56, + GPIO_Y57, + GPIO_Y60, + GPIO_Y61, + GPIO_Y62, + GPIO_Y63, + GPIO_Y64, + GPIO_Y65, + GPIO_Y66, + GPIO_Y67, + + /* GPIO_PART2_STARTS */ + GPIO_MAX_PORT_PART_1, + GPIO_X00 = GPIO_MAX_PORT_PART_1, /* 0xa0 */ + GPIO_X01, + GPIO_X02, + GPIO_X03, + GPIO_X04, + GPIO_X05, + GPIO_X06, + GPIO_X07, + GPIO_X10, + GPIO_X11, + GPIO_X12, + GPIO_X13, + GPIO_X14, + GPIO_X15, + GPIO_X16, + GPIO_X17, + GPIO_X20, + GPIO_X21, + GPIO_X22, + GPIO_X23, + GPIO_X24, + GPIO_X25, + GPIO_X26, + GPIO_X27, + GPIO_X30, + GPIO_X31, + GPIO_X32, + GPIO_X33, + GPIO_X34, + GPIO_X35, + GPIO_X36, + GPIO_X37, + + /* GPIO_PART3_STARTS */ + GPIO_MAX_PORT_PART_2, + GPIO_E00 = GPIO_MAX_PORT_PART_2, /* 0xc0 */ + GPIO_E01, + GPIO_E02, + GPIO_E03, + GPIO_E04, + GPIO_E05, + GPIO_E06, + GPIO_E07, + GPIO_E10, + GPIO_E11, + GPIO_E12, + GPIO_E13, + GPIO_E14, + GPIO_E15, + GPIO_E16, + GPIO_E17, + GPIO_F00, /* 0xd0 */ + GPIO_F01, + GPIO_F02, + GPIO_F03, + GPIO_F04, + GPIO_F05, + GPIO_F06, + GPIO_F07, + GPIO_F10, + GPIO_F11, + GPIO_F12, + GPIO_F13, + GPIO_F14, + GPIO_F15, + GPIO_F16, + GPIO_F17, + GPIO_G00, + GPIO_G01, + GPIO_G02, + GPIO_G03, + GPIO_G04, + GPIO_G05, + GPIO_G06, + GPIO_G07, + GPIO_G10, + GPIO_G11, + GPIO_G12, + GPIO_G13, + GPIO_G14, + GPIO_G15, + GPIO_G16, + GPIO_G17, + GPIO_G20, + GPIO_G21, + GPIO_G22, + GPIO_G23, + GPIO_G24, + GPIO_G25, + GPIO_G26, + GPIO_G27, + GPIO_H00, + GPIO_H01, + GPIO_H02, + GPIO_H03, + GPIO_H04, + GPIO_H05, + GPIO_H06, + GPIO_H07, + GPIO_H10, + GPIO_H11, + GPIO_H12, + GPIO_H13, + GPIO_H14, + GPIO_H15, + GPIO_H16, + GPIO_H17, + + /* GPIO_PART4_STARTS */ + GPIO_MAX_PORT_PART_3, + GPIO_V00 = GPIO_MAX_PORT_PART_3, + GPIO_V01, + GPIO_V02, + GPIO_V03, + GPIO_V04, + GPIO_V05, + GPIO_V06, + GPIO_V07, + GPIO_V10, + GPIO_V11, + GPIO_V12, + GPIO_V13, + GPIO_V14, + GPIO_V15, + GPIO_V16, + GPIO_V17, + GPIO_V20, + GPIO_V21, + GPIO_V22, + GPIO_V23, + GPIO_V24, + GPIO_V25, + GPIO_V26, + GPIO_V27, + GPIO_V30, + GPIO_V31, + GPIO_V32, + GPIO_V33, + GPIO_V34, + GPIO_V35, + GPIO_V36, + GPIO_V37, + + /* GPIO_PART5_STARTS */ + GPIO_MAX_PORT_PART_4, + GPIO_V40 = GPIO_MAX_PORT_PART_4, + GPIO_V41, + GPIO_V42, + GPIO_V43, + GPIO_V44, + GPIO_V45, + GPIO_V46, + GPIO_V47, + + /* GPIO_PART6_STARTS */ + GPIO_MAX_PORT_PART_5, + GPIO_Z0 = GPIO_MAX_PORT_PART_5, + GPIO_Z1, + GPIO_Z2, + GPIO_Z3, + GPIO_Z4, + GPIO_Z5, + GPIO_Z6, + GPIO_MAX_PORT +}; + +#define gpio_status gpio_info + +/** + * Set GPIO pin configuration. + * + * @param gpio GPIO pin + * @param cfg Either GPIO_INPUT, GPIO_OUTPUT, or GPIO_IRQ + */ +void gpio_cfg_pin(int gpio, int cfg); + +/** + * Set GPIO pull mode. + * + * @param gpio GPIO pin + * @param mode Either GPIO_PULL_DOWN or GPIO_PULL_UP + */ +void gpio_set_pull(int gpio, int mode); + +/** + * Set GPIO drive strength level. + * + * @param gpio GPIO pin + * @param mode Either GPIO_DRV_1X, GPIO_DRV_2X, GPIO_DRV_3X, or GPIO_DRV_4X + */ +void gpio_set_drv(int gpio, int mode); + +/** + * Set GPIO drive rate. + * + * @param gpio GPIO pin + * @param mode Either GPIO_DRV_FAST or GPIO_DRV_SLOW + */ +void gpio_set_rate(int gpio, int mode); + +/* FIXME(dhendrix) use generic arch/gpio.h API instead */ +//int gpio_direction_input(unsigned gpio); +//int gpio_direction_output(unsigned gpio, int value); + +/** + * Decode a list of GPIOs into an integer. + * + * TODO(sjg@chromium.org): This could perhaps become a generic function? + * + * Each GPIO pin can be put into three states using external resistors: + * - pulled up + * - pulled down + * - not connected + * + * Read each GPIO in turn to produce an integer value. The first GPIO + * produces a number 1 * (0 to 2), the second produces 3 * (0 to 2), etc. + * In this way, each GPIO increases the number of possible states by a + * factor of 3. + * + * @param gpio_list List of GPIO numbers to decode + * @param count Number of GPIOs in list + * @return -1 if the value cannot be determined, or any GPIO number is + * invalid. Otherwise returns the calculated value + */ +int gpio_decode_number(unsigned gpio_list[], int count); + +void gpio_info(void); + +#endif /* EXYNOS5250_GPIO_H_ */ diff --git a/src/cpu/samsung/exynos5250/i2s-regs.h b/src/cpu/samsung/exynos5250/i2s-regs.h new file mode 100644 index 0000000000..19267ca88a --- /dev/null +++ b/src/cpu/samsung/exynos5250/i2s-regs.h @@ -0,0 +1,146 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * R. Chandrasekar <rcsekar@samsung.com> + * + * Taken from the kernel code + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __I2S_REGS_H__ +#define __I2S_REGS_H__ + +#define I2SCON 0x0 +#define I2SMOD 0x4 +#define I2SFIC 0x8 +#define I2SPSR 0xc +#define I2STXD 0x10 +#define I2SRXD 0x14 +#define I2SFICS 0x18 +#define I2STXDS 0x1c +#define I2SAHB 0x20 +#define I2SSTR0 0x24 +#define I2SSIZE 0x28 +#define I2STRNCNT 0x2c +#define I2SLVL0ADDR 0x30 +#define I2SLVL1ADDR 0x34 +#define I2SLVL2ADDR 0x38 +#define I2SLVL3ADDR 0x3c + +#define CON_RSTCLR (1 << 31) +#define CON_FRXOFSTATUS (1 << 26) +#define CON_FRXORINTEN (1 << 25) +#define CON_FTXSURSTAT (1 << 24) +#define CON_FTXSURINTEN (1 << 23) +#define CON_TXSDMA_PAUSE (1 << 20) +#define CON_TXSDMA_ACTIVE (1 << 18) + +#define CON_FTXURSTATUS (1 << 17) +#define CON_FTXURINTEN (1 << 16) +#define CON_TXFIFO2_EMPTY (1 << 15) +#define CON_TXFIFO1_EMPTY (1 << 14) +#define CON_TXFIFO2_FULL (1 << 13) +#define CON_TXFIFO1_FULL (1 << 12) + +#define CON_LRINDEX (1 << 11) +#define CON_TXFIFO_EMPTY (1 << 10) +#define CON_RXFIFO_EMPTY (1 << 9) +#define CON_TXFIFO_FULL (1 << 8) +#define CON_RXFIFO_FULL (1 << 7) +#define CON_TXDMA_PAUSE (1 << 6) +#define CON_RXDMA_PAUSE (1 << 5) +#define CON_TXCH_PAUSE (1 << 4) +#define CON_RXCH_PAUSE (1 << 3) +#define CON_TXDMA_ACTIVE (1 << 2) +#define CON_RXDMA_ACTIVE (1 << 1) +#define CON_ACTIVE (1 << 0) + +#define MOD_OPCLK_CDCLK_OUT (0 << 30) +#define MOD_OPCLK_CDCLK_IN (1 << 30) +#define MOD_OPCLK_BCLK_OUT (2 << 30) +#define MOD_OPCLK_PCLK (3 << 30) +#define MOD_OPCLK_MASK (3 << 30) +#define MOD_TXS_IDMA (1 << 28) /* Sec_TXFIFO use I-DMA */ + +#define MOD_BLCS_SHIFT 26 +#define MOD_BLCS_16BIT (0 << MOD_BLCS_SHIFT) +#define MOD_BLCS_8BIT (1 << MOD_BLCS_SHIFT) +#define MOD_BLCS_24BIT (2 << MOD_BLCS_SHIFT) +#define MOD_BLCS_MASK (3 << MOD_BLCS_SHIFT) + +#define MOD_BLCP_SHIFT 24 +#define MOD_BLCP_16BIT (0 << MOD_BLCP_SHIFT) +#define MOD_BLCP_8BIT (1 << MOD_BLCP_SHIFT) +#define MOD_BLCP_24BIT (2 << MOD_BLCP_SHIFT) +#define MOD_BLCP_MASK (3 << MOD_BLCP_SHIFT) + +#define MOD_C2DD_HHALF (1 << 21) /* Discard Higher-half */ +#define MOD_C2DD_LHALF (1 << 20) /* Discard Lower-half */ +#define MOD_C1DD_HHALF (1 << 19) +#define MOD_C1DD_LHALF (1 << 18) +#define MOD_DC2_EN (1 << 17) +#define MOD_DC1_EN (1 << 16) +#define MOD_BLC_16BIT (0 << 13) +#define MOD_BLC_8BIT (1 << 13) +#define MOD_BLC_24BIT (2 << 13) +#define MOD_BLC_MASK (3 << 13) + +#define MOD_IMS_SYSMUX (1 << 10) +#define MOD_SLAVE (1 << 11) +#define MOD_TXONLY (0 << 8) +#define MOD_RXONLY (1 << 8) +#define MOD_TXRX (2 << 8) +#define MOD_MASK (3 << 8) +#define MOD_LR_LLOW (0 << 7) +#define MOD_LR_RLOW (1 << 7) +#define MOD_SDF_IIS (0 << 5) +#define MOD_SDF_MSB (1 << 5) +#define MOD_SDF_LSB (2 << 5) +#define MOD_SDF_MASK (3 << 5) +#define MOD_RCLK_256FS (0 << 3) +#define MOD_RCLK_512FS (1 << 3) +#define MOD_RCLK_384FS (2 << 3) +#define MOD_RCLK_768FS (3 << 3) +#define MOD_RCLK_MASK (3 << 3) +#define MOD_BCLK_32FS (0 << 1) +#define MOD_BCLK_48FS (1 << 1) +#define MOD_BCLK_16FS (2 << 1) +#define MOD_BCLK_24FS (3 << 1) +#define MOD_BCLK_MASK (3 << 1) +#define MOD_8BIT (1 << 0) + +#define MOD_CDCLKCON (1 << 12) + +#define PSR_PSREN (1 << 15) + +#define FIC_TXFLUSH (1 << 15) +#define FIC_RXFLUSH (1 << 7) + +#define AHB_INTENLVL0 (1 << 24) +#define AHB_LVL0INT (1 << 20) +#define AHB_CLRLVL0INT (1 << 16) +#define AHB_DMARLD (1 << 5) +#define AHB_INTMASK (1 << 3) +#define AHB_DMAEN (1 << 0) +#define AHB_LVLINTMASK (0xf << 20) + +#define I2SSIZE_TRNMSK (0xffff) +#define I2SSIZE_SHIFT (16) + +#endif /* __I2S_REGS_H__ */ diff --git a/src/cpu/samsung/exynos5250/mmc.h b/src/cpu/samsung/exynos5250/mmc.h new file mode 100644 index 0000000000..24acbc1938 --- /dev/null +++ b/src/cpu/samsung/exynos5250/mmc.h @@ -0,0 +1,27 @@ +/* + * (C) Copyright 2012 Samsung Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#ifndef __ASM_ARM_ARCH_EXYNOS5_MMC_H__ +#define __ASM_ARM_ARCH_EXYNOS5_MMC_H__ + +#include <asm/arch-exynos/mmc.h> + +#endif /* __ASM_ARM_ARCH_EXYNOS5_MMC_H__ */ diff --git a/src/cpu/samsung/exynos5250/mshc.h b/src/cpu/samsung/exynos5250/mshc.h new file mode 100644 index 0000000000..d8e3ad0c75 --- /dev/null +++ b/src/cpu/samsung/exynos5250/mshc.h @@ -0,0 +1,31 @@ +/* + * (C) Copyright 2012 Samsung Electronics + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#ifndef __ASM_ARM_ARCH_EXYNOS5_MSHC_H__ +#define __ASM_ARM_ARCH_EXYNOS5_MSHC_H__ + +#include <asm/arch-exynos/mshc.h> + +#define MAX_MSHCI_CLOCK 52000000 /* Max limit for mshc clock is 52MHz */ +#define MIN_MSHCI_CLOCK 400000 /* Lower limit for mshc clock is 400KHz */ +#define COMMAND_TIMEOUT 10000 +#define TIMEOUT_MS 100 + +#endif /* __ASM_ARM_ARCH_EXYNOS5_MSHC_H__ */ diff --git a/src/cpu/samsung/exynos5250/periph.h b/src/cpu/samsung/exynos5250/periph.h new file mode 100644 index 0000000000..e14829e994 --- /dev/null +++ b/src/cpu/samsung/exynos5250/periph.h @@ -0,0 +1,71 @@ +/* + * (C) Copyright 2012 The Chromium Authors + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#ifndef __EXYNOS_PERIPH_H +#define __EXYNOS_PERIPH_H + +/* + * Peripherals requiring clock/pinmux configuration. List will + * grow with support for more devices getting added. + * + * At present the order is arbitrary - we may be able to take advantage + * of some orthogonality later. + */ +enum periph_id { + PERIPH_ID_UART0, + PERIPH_ID_UART1, + PERIPH_ID_UART2, + PERIPH_ID_UART3, + PERIPH_ID_SDMMC0, + PERIPH_ID_SDMMC1, + PERIPH_ID_SDMMC2, + PERIPH_ID_SDMMC3, + + /* TODO: make sequential again when FDT doesn't hardcode. */ + PERIPH_ID_SROMC = 9, + PERIPH_ID_SPI0, + PERIPH_ID_SPI1, + PERIPH_ID_SPI2, + PERIPH_ID_SPI3, + PERIPH_ID_SPI4, + PERIPH_ID_LCD, + PERIPH_ID_BACKLIGHT, + PERIPH_ID_I2C0, + PERIPH_ID_I2C1, + PERIPH_ID_I2C2, + PERIPH_ID_I2C3, + PERIPH_ID_I2C4, + PERIPH_ID_I2C5, + PERIPH_ID_I2C6, + PERIPH_ID_I2C7, + PERIPH_ID_DPHPD, /* eDP hot plug detect */ + PERIPH_ID_PWM0, + PERIPH_ID_PWM1, + PERIPH_ID_PWM2, + PERIPH_ID_PWM3, + PERIPH_ID_PWM4, + PERIPH_ID_I2S1, + PERIPH_ID_SATA, + + PERIPH_ID_COUNT, + PERIPH_ID_NONE = -1, +}; + +#endif diff --git a/src/cpu/samsung/exynos5250/pinmux.h b/src/cpu/samsung/exynos5250/pinmux.h new file mode 100644 index 0000000000..81c00870a6 --- /dev/null +++ b/src/cpu/samsung/exynos5250/pinmux.h @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __EXYNOS_PINMUX_H +#define __EXYNOS_PINMUX_H + +//#include <asm/arch/periph.h> +#include "periph.h" + +enum { + PINMUX_FLAG_NONE = 0x00000000, + + /* Flags for eMMC */ + PINMUX_FLAG_8BIT_MODE = 1 << 0, /* SDMMC 8-bit mode */ + + /* + * Flags for SPI. + */ + PINMUX_FLAG_SLAVE_MODE = 1 << 0, /* Slave mode */ + + /* Flags for SROM controller */ + PINMUX_FLAG_BANK = 3 << 0, /* bank number (0-3) */ + PINMUX_FLAG_16BIT = 1 << 2, /* 16-bit width */ +}; + +/** + * Configures the pinmux for a particular peripheral. + * + * Each gpio can be configured in many different ways (4 bits on exynos) + * such as "input", "output", "special function", "external interrupt" + * etc. This function will configure the peripheral pinmux along with + * pull-up/down and drive strength. + * + * @param peripheral peripheral to be configured + * @param flags configure flags + * @return 0 if ok, -1 on error (e.g. unsupported peripheral) + */ +int exynos_pinmux_config(enum periph_id peripheral, int flags); + +#endif diff --git a/src/cpu/samsung/exynos5250/power.h b/src/cpu/samsung/exynos5250/power.h new file mode 100644 index 0000000000..59a02574db --- /dev/null +++ b/src/cpu/samsung/exynos5250/power.h @@ -0,0 +1,89 @@ +/* + * (C) Copyright 2012 Samsung Electronics + * Register map for Exynos5 PMU + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __EXYNOS5_POWER_H__ +#define __EXYNOS5_POWER_H__ + +#define MIPI_PHY1_CONTROL_ENABLE (1 << 0) +#define MIPI_PHY1_CONTROL_M_RESETN (1 << 2) + +#define POWER_USB_HOST_PHY_CTRL_EN (1 << 0) +#define POWER_PS_HOLD_CONTROL_DATA_HIGH (1 << 8) +#define POWER_ENABLE_HW_TRIP (1UL << 31) + +#define DPTX_PHY_ENABLE (1 << 0) + +/* PMU_DEBUG bits [12:8] = 0x1000 selects XXTI clock source */ +#define PMU_DEBUG_XXTI 0x1000 +/* Mask bit[12:8] for xxti clock selection */ +#define PMU_DEBUG_CLKOUT_SEL_MASK 0x1f00 + +/* Power Management Unit register map */ +struct exynos5_power { + /* Add registers as and when required */ + uint8_t reserved1[0x0400]; + uint32_t sw_reset; /* 0x0400 */ + uint8_t reserved2[0x0304]; + uint32_t usb_host_phy_ctrl; /* 0x0708 */ + uint8_t reserved3[0x8]; + uint32_t mipi_phy1_control; /* 0x0714 */ + uint8_t reserved4[0x8]; + uint32_t dptx_phy_control; /* 0x0720 */ + uint8_t reserved5[0xdc]; + uint32_t inform0; /* 0x0800 */ + uint32_t inform1; /* 0x0804 */ + uint8_t reserved6[0x1f8]; + uint32_t pmu_debug; /* 0x0A00*/ + uint8_t reserved7[0x2908]; + uint32_t ps_hold_ctrl; /* 0x330c */ +} __attribute__ ((__packed__)); + +/** + * Perform a software reset. + */ +void power_reset(void); + +/** + * Power off the system; it should never return. + */ +void power_shutdown(void); + +/* Enable DPTX PHY */ +void power_enable_dp_phy(void); + +void power_enable_usb_phy(void); +void power_disable_usb_phy(void); + +/* Enable HW thermal trip with PS_HOLD_CONTROL register ENABLE_HW_TRIP bit */ +void power_enable_hw_thermal_trip(void); + +/* Initialize the pmic voltages to power up the system */ +int power_init(void); + +/* Read the reset status. */ +uint32_t power_read_reset_status(void); + +/* Read the resume function and call it. */ +void power_exit_wakeup(void); + +/* pmu debug is used for xclkout, enable xclkout with source as XXTI */ +void power_enable_xclkout(void); + +#endif diff --git a/src/cpu/samsung/exynos5250/pwm.h b/src/cpu/samsung/exynos5250/pwm.h new file mode 100644 index 0000000000..e7ae208cfd --- /dev/null +++ b/src/cpu/samsung/exynos5250/pwm.h @@ -0,0 +1,27 @@ +/* + * (C) Copyright 2012 Samsung Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#ifndef __ASM_ARM_ARCH_EXYNOS5_PWM_H__ +#define __ASM_ARM_ARCH_EXYNOS5_PWM_H__ + +#include <asm/arch-exynos/pwm.h> + +#endif /* __ASM_ARM_ARCH_EXYNOS5_PWM_H__ */ diff --git a/src/cpu/samsung/exynos5250/s5p-dp.h b/src/cpu/samsung/exynos5250/s5p-dp.h new file mode 100644 index 0000000000..5322383e82 --- /dev/null +++ b/src/cpu/samsung/exynos5250/s5p-dp.h @@ -0,0 +1,513 @@ +/* + * (C) Copyright 2012 Samsung Electronics + * Register map for Exynos5 DP + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __EXYNOS5_DP_H__ +#define __EXYNOS5_DP_H__ + +/* DSIM register map */ +struct exynos5_dp { + unsigned char res1[0x10]; + unsigned int dp_tx_version; + unsigned int dp_tx_sw_reset; + unsigned int func_en_1; + unsigned int func_en_2; + unsigned int video_ctl_1; + unsigned int video_ctl_2; + unsigned int video_ctl_3; + unsigned int video_ctl_4; + unsigned int clr_blue_cb; + unsigned int clr_green_y; + unsigned int clr_red_cr; + unsigned int video_ctl_8; + unsigned char res2[0x4]; + unsigned int video_ctl_10; + unsigned int total_line_l; + unsigned int total_line_h; + unsigned int active_line_l; + unsigned int active_line_h; + unsigned int v_f_porch; + unsigned int vsync; + unsigned int v_b_porch; + unsigned int total_pixel_l; + unsigned int total_pixel_h; + unsigned int active_pixel_l; + unsigned int active_pixel_h; + unsigned int h_f_porch_l; + unsigned int h_f_porch_h; + unsigned int hsync_l; + unsigned int hysnc_h; + unsigned int h_b_porch_l; + unsigned int h_b_porch_h; + unsigned int vid_status; + unsigned int total_line_sta_l; + unsigned int total_line_sta_h; + unsigned int active_line_sta_l; + unsigned int active_line_sta_h; + unsigned int v_f_porch_sta; + unsigned int vsync_sta; + unsigned int v_b_porch_sta; + unsigned int total_pixel_sta_l; + unsigned int total_pixel_sta_h; + unsigned int active_pixel_sta_l; + unsigned int active_pixel_sta_h; + unsigned int h_f_porch_sta_l; + unsigned int h_f_porch_sta_h; + unsigned int hsync_sta_l; + unsigned int hsync_sta_h; + unsigned int h_b_porch_sta_l; + unsigned int h_b_porch__sta_h; + unsigned char res3[0x288]; + unsigned int lane_map; + unsigned char res4[0x10]; + unsigned int analog_ctl_1; + unsigned int analog_ctl_2; + unsigned int analog_ctl_3; + unsigned int pll_filter_ctl_1; + unsigned int tx_amp_tuning_ctl; + unsigned char res5[0xc]; + unsigned int aux_hw_retry_ctl; + unsigned char res6[0x2c]; + unsigned int int_state; + unsigned int common_int_sta_1; + unsigned int common_int_sta_2; + unsigned int common_int_sta_3; + unsigned int common_int_sta_4; + unsigned char res7[0x8]; + unsigned int dp_int_sta; + unsigned int common_int_mask_1; + unsigned int common_int_mask_2; + unsigned int common_int_mask_3; + unsigned int common_int_mask_4; + unsigned char res8[0x08]; + unsigned int int_sta_mask; + unsigned int int_ctl; + unsigned char res9[0x200]; + unsigned int sys_ctl_1; + unsigned int sys_ctl_2; + unsigned int sys_ctl_3; + unsigned int sys_ctl_4; + unsigned int dp_vid_ctl; + unsigned char res10[0x2c]; + unsigned int pkt_send_ctl; + unsigned char res11[0x4]; + unsigned int dp_hdcp_ctl; + unsigned char res12[0x34]; + unsigned int link_bw_set; + unsigned int lane_count_set; + unsigned int dp_training_ptn_set; + unsigned int ln0_link_trn_ctl; + unsigned int ln1_link_trn_ctl; + unsigned int ln2_link_trn_ctl; + unsigned int ln3_link_trn_ctl; + unsigned int dp_dn_spread; + unsigned int dp_hw_link_training; + unsigned char res13[0x1c]; + unsigned int dp_debug_ctl; + unsigned int dp_hpd_deglitch_l; + unsigned int dp_hpd_deglitch_h; + unsigned char res14[0x14]; + unsigned int dp_link_debug_ctl; + unsigned char res15[0x1c]; + unsigned int m_vid_0; + unsigned int m_vid_1; + unsigned int m_vid_2; + unsigned int n_vid_0; + unsigned int n_vid_1; + unsigned int n_vid_2; + unsigned int m_vid_mon; + unsigned int dp_pll_ctl; + unsigned int dp_phy_pd; + unsigned int dp_phy_test; + unsigned char res16[0x8]; + unsigned int dp_video_fifo_thrd; + unsigned char res17[0x8]; + unsigned int dp_audio_margin; + unsigned int dp_dn_spread_ctl_1; + unsigned int dp_dn_spread_ctl_2; + unsigned char res18[0x18]; + unsigned int dp_m_cal_ctl; + unsigned int m_vid_gen_filter_th; + unsigned char res19[0x14]; + unsigned int m_aud_gen_filter_th; + unsigned int aux_ch_sta; + unsigned int aux_err_num; + unsigned int aux_ch_defer_dtl; + unsigned int aux_rx_comm; + unsigned int buf_data_ctl; + unsigned int aux_ch_ctl_1; + unsigned int aux_addr_7_0; + unsigned int aux_addr_15_8; + unsigned int aux_addr_19_16; + unsigned int aux_ch_ctl_2; + unsigned char res20[0x18]; + unsigned int buf_data_0; + unsigned char res21[0x3c]; + unsigned int soc_general_ctl; +}; +/* DP_TX_SW_RESET */ +#define RESET_DP_TX (1 << 0) + +/* DP_FUNC_EN_1 */ +#define MASTER_VID_FUNC_EN_N (1 << 7) +#define SLAVE_VID_FUNC_EN_N (1 << 5) +#define AUD_FIFO_FUNC_EN_N (1 << 4) +#define AUD_FUNC_EN_N (1 << 3) +#define HDCP_FUNC_EN_N (1 << 2) +#define CRC_FUNC_EN_N (1 << 1) +#define SW_FUNC_EN_N (1 << 0) + +/* DP_FUNC_EN_2 */ +#define SSC_FUNC_EN_N (1 << 7) +#define AUX_FUNC_EN_N (1 << 2) +#define SERDES_FIFO_FUNC_EN_N (1 << 1) +#define LS_CLK_DOMAIN_FUNC_EN_N (1 << 0) + +/* DP_VIDEO_CTL_1 */ +#define VIDEO_EN (1 << 7) +#define HDCP_VIDEO_MUTE (1 << 6) + +/* DP_VIDEO_CTL_1 */ +#define IN_D_RANGE_MASK (1 << 7) +#define IN_D_RANGE_SHIFT (7) +#define IN_D_RANGE_CEA (1 << 7) +#define IN_D_RANGE_VESA (0 << 7) +#define IN_BPC_MASK (7 << 4) +#define IN_BPC_SHIFT (4) +#define IN_BPC_12_BITS (3 << 4) +#define IN_BPC_10_BITS (2 << 4) +#define IN_BPC_8_BITS (1 << 4) +#define IN_BPC_6_BITS (0 << 4) +#define IN_COLOR_F_MASK (3 << 0) +#define IN_COLOR_F_SHIFT (0) +#define IN_COLOR_F_YCBCR444 (2 << 0) +#define IN_COLOR_F_YCBCR422 (1 << 0) +#define IN_COLOR_F_RGB (0 << 0) + +/* DP_VIDEO_CTL_3 */ +#define IN_YC_COEFFI_MASK (1 << 7) +#define IN_YC_COEFFI_SHIFT (7) +#define IN_YC_COEFFI_ITU709 (1 << 7) +#define IN_YC_COEFFI_ITU601 (0 << 7) +#define VID_CHK_UPDATE_TYPE_MASK (1 << 4) +#define VID_CHK_UPDATE_TYPE_SHIFT (4) +#define VID_CHK_UPDATE_TYPE_1 (1 << 4) +#define VID_CHK_UPDATE_TYPE_0 (0 << 4) + +/* DP_VIDEO_CTL_10 */ +#define FORMAT_SEL (1 << 4) +#define INTERACE_SCAN_CFG (1 << 2) +#define VSYNC_POLARITY_CFG (1 << 1) +#define HSYNC_POLARITY_CFG (1 << 0) + +/* DP_LANE_MAP */ +#define LANE3_MAP_LOGIC_LANE_0 (0 << 6) +#define LANE3_MAP_LOGIC_LANE_1 (1 << 6) +#define LANE3_MAP_LOGIC_LANE_2 (2 << 6) +#define LANE3_MAP_LOGIC_LANE_3 (3 << 6) +#define LANE2_MAP_LOGIC_LANE_0 (0 << 4) +#define LANE2_MAP_LOGIC_LANE_1 (1 << 4) +#define LANE2_MAP_LOGIC_LANE_2 (2 << 4) +#define LANE2_MAP_LOGIC_LANE_3 (3 << 4) +#define LANE1_MAP_LOGIC_LANE_0 (0 << 2) +#define LANE1_MAP_LOGIC_LANE_1 (1 << 2) +#define LANE1_MAP_LOGIC_LANE_2 (2 << 2) +#define LANE1_MAP_LOGIC_LANE_3 (3 << 2) +#define LANE0_MAP_LOGIC_LANE_0 (0 << 0) +#define LANE0_MAP_LOGIC_LANE_1 (1 << 0) +#define LANE0_MAP_LOGIC_LANE_2 (2 << 0) +#define LANE0_MAP_LOGIC_LANE_3 (3 << 0) + +/* DP_AUX_HW_RETRY_CTL */ +#define AUX_BIT_PERIOD_SHIFT 8 +#define AUX_BIT_PERIOD_MASK 7 + +#define AUX_HW_RETRY_INTERVAL_SHIFT 3 +#define AUX_HW_RETRY_INTERVAL_600_US 0 +#define AUX_HW_RETRY_INTERVAL_800_US 1 +#define AUX_HW_RETRY_INTERVAL_1000_US 2 +#define AUX_HW_RETRY_INTERVAL_1800_US 3 +#define AUX_HW_RETRY_COUNT_SHIFT 0 +#define AUX_HW_RETRY_COUNT_MASK 7 + +/* DP_COMMON_INT_STA_1 */ +#define VSYNC_DET (1 << 7) +#define PLL_LOCK_CHG (1 << 6) +#define SPDIF_ERR (1 << 5) +#define SPDIF_UNSTBL (1 << 4) +#define VID_FORMAT_CHG (1 << 3) +#define AUD_CLK_CHG (1 << 2) +#define VID_CLK_CHG (1 << 1) +#define SW_INT (1 << 0) + +/* DP_COMMON_INT_STA_2 */ +#define ENC_EN_CHG (1 << 6) +#define HW_BKSV_RDY (1 << 3) +#define HW_SHA_DONE (1 << 2) +#define HW_AUTH_STATE_CHG (1 << 1) +#define HW_AUTH_DONE (1 << 0) + +/* DP_COMMON_INT_STA_3 */ +#define AFIFO_UNDER (1 << 7) +#define AFIFO_OVER (1 << 6) +#define R0_CHK_FLAG (1 << 5) + +/* DP_COMMON_INT_STA_4 */ +#define PSR_ACTIVE (1 << 7) +#define PSR_INACTIVE (1 << 6) +#define SPDIF_BI_PHASE_ERR (1 << 5) +#define HOTPLUG_CHG (1 << 2) +#define HPD_LOST (1 << 1) +#define PLUG (1 << 0) + +/* DP_INT_STA */ +#define INT_HPD (1 << 6) +#define HW_TRAINING_FINISH (1 << 5) +#define RPLY_RECEIV (1 << 1) +#define AUX_ERR (1 << 0) + +/* DP_INT_CTL */ +#define INT_POL0 (1 << 0) +#define INT_POL1 (1 << 1) +#define SOFT_INT_CTRL (1 << 2) + +/* DP_SYS_CTL_1 */ +#define DET_STA (1 << 2) +#define FORCE_DET (1 << 1) +#define DET_CTRL (1 << 0) + +/* DP_SYS_CTL_2 */ +#define CHA_CRI_SHIFT 4 +#define CHA_CRI_MASK 0xf +#define CHA_STA (1 << 2) +#define FORCE_CHA (1 << 1) +#define CHA_CTRL (1 << 0) + +/* DP_SYS_CTL_3 */ +#define HPD_STATUS (1 << 6) +#define F_HPD (1 << 5) +#define HPD_CTRL (1 << 4) +#define HDCP_RDY (1 << 3) +#define STRM_VALID (1 << 2) +#define F_VALID (1 << 1) +#define VALID_CTRL (1 << 0) + +/* DP_SYS_CTL_4 */ +#define FIX_M_AUD (1 << 4) +#define ENHANCED (1 << 3) +#define FIX_M_VID (1 << 2) +#define M_VID_UPDATE_CTRL (3 << 0) + +/* DP_TRAINING_PTN_SET */ +#define SCRAMBLER_TYPE (1 << 9) +#define HW_LINK_TRAINING_PATTERN (1 << 8) +#define SCRAMBLING_DISABLE (1 << 5) +#define SCRAMBLING_ENABLE (0 << 5) +#define LINK_QUAL_PATTERN_SET_MASK (3 << 2) +#define LINK_QUAL_PATTERN_SET_PRBS7 (3 << 2) +#define LINK_QUAL_PATTERN_SET_D10_2 (1 << 2) +#define LINK_QUAL_PATTERN_SET_DISABLE (0 << 2) +#define SW_TRAINING_PATTERN_SET_MASK (3 << 0) +#define SW_TRAINING_PATTERN_SET_PTN2 (2 << 0) +#define SW_TRAINING_PATTERN_SET_PTN1 (1 << 0) +#define SW_TRAINING_PATTERN_SET_NORMAL (0 << 0) + +/* DP_LN0_LINK_TRAINING_CTL */ +#define PRE_EMPHASIS_SET_SHIFT (3) + +/* DP_DEBUG_CTL */ +#define PLL_LOCK (1 << 4) +#define F_PLL_LOCK (1 << 3) +#define PLL_LOCK_CTRL (1 << 2) +#define PN_INV (1 << 0) + +/* DP_M_VID */ +#define M_VID_0_VALUE_SHIFT 0 +#define M_VID_1_VALUE_SHIFT 8 +#define M_VID_2_VALUE_SHIFT 16 + +/* DP_M_VID */ +#define N_VID_0_VALUE_SHIFT 0 +#define N_VID_1_VALUE_SHIFT 8 +#define N_VID_2_VALUE_SHIFT 16 + +/* DP_PLL_CTL */ +#define DP_PLL_PD (1 << 7) +#define DP_PLL_RESET (1 << 6) +#define DP_PLL_LOOP_BIT_DEFAULT (1 << 4) +#define DP_PLL_REF_BIT_1_1250V (5 << 0) +#define DP_PLL_REF_BIT_1_2500V (7 << 0) + +/* DP_PHY_PD */ +#define DP_PHY_PD (1 << 5) +#define AUX_PD (1 << 4) +#define CH3_PD (1 << 3) +#define CH2_PD (1 << 2) +#define CH1_PD (1 << 1) +#define CH0_PD (1 << 0) + +/* DP_PHY_TEST */ +#define MACRO_RST (1 << 5) +#define CH1_TEST (1 << 1) +#define CH0_TEST (1 << 0) + +/* DP_AUX_CH_STA */ +#define AUX_BUSY (1 << 4) +#define AUX_STATUS_MASK (0xf << 0) + +/* DP_AUX_CH_DEFER_CTL */ +#define DEFER_CTRL_EN (1 << 7) +#define DEFER_COUNT_SHIFT 0 +#define DEFER_COUNT_MASK 0x7f + +/* DP_AUX_RX_COMM */ +#define AUX_RX_COMM_I2C_DEFER (2 << 2) +#define AUX_RX_COMM_AUX_DEFER (2 << 0) + +/* DP_BUFFER_DATA_CTL */ +#define BUF_CLR (1 << 7) + +/* Maximum number of tries for Aux Transaction */ +#define MAX_AUX_RETRY_COUNT 10 + +/* DP_AUX_CH_CTL_1 */ +#define AUX_LENGTH_SHIFT 4 +#define AUX_LENGTH_MASK 0xf + +#define AUX_TX_COMM_MASK (0xf << 0) +#define AUX_TX_COMM_DP_TRANSACTION (1 << 3) +#define AUX_TX_COMM_I2C_TRANSACTION (0 << 3) +#define AUX_TX_COMM_MOT (1 << 2) +#define AUX_TX_COMM_WRITE (0 << 0) +#define AUX_TX_COMM_READ (1 << 0) + +/* DP_AUX_ADDR_7_0 */ +#define AUX_ADDR_7_0_SHIFT 0 +#define AUX_ADDR_7_0_MASK 0xff + +/* DP_AUX_ADDR_15_8 */ +#define AUX_ADDR_15_8_SHIFT 8 +#define AUX_ADDR_15_8_MASK 0xff + +/* DP_AUX_ADDR_19_16 */ +#define AUX_ADDR_19_16_SHIFT 16 +#define AUX_ADDR_19_16_MASK 0x0f + +/* DP_AUX_CH_CTL_2 */ +#define ADDR_ONLY (1 << 1) +#define AUX_EN (1 << 0) + +/* DP_SOC_GENERAL_CTL */ +#define AUDIO_MODE_SPDIF_MODE (1 << 8) +#define AUDIO_MODE_MASTER_MODE (0 << 8) +#define MASTER_VIDEO_INTERLACE_EN (1 << 4) +#define VIDEO_MASTER_CLK_SEL (1 << 2) +#define VIDEO_MASTER_MODE_EN (1 << 1) +#define VIDEO_MODE_MASK (1 << 0) +#define VIDEO_MODE_SLAVE_MODE (1 << 0) +#define VIDEO_MODE_MASTER_MODE (0 << 0) + +#define HW_TRAINING_ERROR_CODE (7<<4) +#define HW_TRAINING_EN (1<<0) + +/* I2C EDID Chip ID, Slave Address */ +#define I2C_EDID_DEVICE_ADDR 0x50 +#define I2C_E_EDID_DEVICE_ADDR 0x30 + +#define EDID_BLOCK_LENGTH 0x80 +#define EDID_HEADER_PATTERN 0x00 +#define EDID_EXTENSION_FLAG 0x7e +#define EDID_CHECKSUM 0x7f + +/* Definition for DPCD Register */ +#define DPCD_ADDR_DPCD_REV 0x0000 +#define DPCD_ADDR_MAX_LINK_RATE 0x0001 +#define DPCD_ADDR_MAX_LANE_COUNT 0x0002 +#define DPCD_ADDR_LINK_BW_SET 0x0100 +#define DPCD_ADDR_LANE_COUNT_SET 0x0101 +#define DPCD_ADDR_TRAINING_PATTERN_SET 0x0102 +#define DPCD_ADDR_TRAINING_LANE0_SET 0x0103 +#define DPCD_ADDR_LANE0_1_STATUS 0x0202 +#define DPCD_ADDR_LANE_ALIGN__STATUS_UPDATED 0x0204 +#define DPCD_ADDR_ADJUST_REQUEST_LANE0_1 0x0206 +#define DPCD_ADDR_ADJUST_REQUEST_LANE2_3 0x0207 +#define DPCD_ADDR_TEST_REQUEST 0x0218 +#define DPCD_ADDR_TEST_RESPONSE 0x0260 +#define DPCD_ADDR_TEST_EDID_CHECKSUM 0x0261 +#define DPCD_ADDR_SINK_POWER_STATE 0x0600 + +/* DPCD_ADDR_MAX_LANE_COUNT */ +#define DPCD_MAX_LANE_COUNT_MASK 0x1f + +/* DPCD_ADDR_LANE_COUNT_SET */ +#define DPCD_ENHANCED_FRAME_EN (1 << 7) +#define DPCD_LANE_COUNT_SET_MASK 0x1f + +/* DPCD_ADDR_TRAINING_PATTERN_SET */ +#define DPCD_SCRAMBLING_DISABLED (1 << 5) +#define DPCD_SCRAMBLING_ENABLED (0 << 5) +#define DPCD_TRAINING_PATTERN_2 (2 << 0) +#define DPCD_TRAINING_PATTERN_1 (1 << 0) +#define DPCD_TRAINING_PATTERN_DISABLED (0 << 0) + +/* DPCD_ADDR_LANE0_1_STATUS */ +#define DPCD_LANE_SYMBOL_LOCKED (1 << 2) +#define DPCD_LANE_CHANNEL_EQ_DONE (1 << 1) +#define DPCD_LANE_CR_DONE (1 << 0) +#define DPCD_CHANNEL_EQ_BITS (DPCD_LANE_CR_DONE | \ + DPCD_LANE_CHANNEL_EQ_DONE | \ + DPCD_LANE_SYMBOL_LOCKED) + +/* DPCD_ADDR_LANE_ALIGN__STATUS_UPDATED */ +#define DPCD_LINK_STATUS_UPDATED (1 << 7) +#define DPCD_DOWNSTREAM_PORT_STATUS_CHANGED (1 << 6) +#define DPCD_INTERLANE_ALIGN_DONE (1 << 0) + +/* DPCD_ADDR_TEST_REQUEST */ +#define DPCD_TEST_EDID_READ (1 << 2) + +/* DPCD_ADDR_TEST_RESPONSE */ +#define DPCD_TEST_EDID_CHECKSUM_WRITE (1 << 2) + +/* DPCD_ADDR_SINK_POWER_STATE */ +#define DPCD_SET_POWER_STATE_D0 (1 << 0) +#define DPCD_SET_POWER_STATE_D4 (2 << 0) + +/* Allow DP Gating clock and set FIMD source to 267 Mhz for DP */ +void clock_init_dp_clock(void); + +/** + * Perform the next stage of the LCD init if it is time to do so. + * + * LCD init can be time-consuming because of the number of delays we need + * while waiting for the backlight power supply, etc. This function can + * be called at various times during U-Boot operation to advance the + * initialization of the LCD to the next stage if sufficient time has + * passed since the last stage. It keeps track of what stage it is up to + * and the time that it is permitted to move to the next stage. + * + * The final call should have can_block=1 to complete the init. + * + * @param blob fdt blob containing LCD information + * @param can_block 1 to wait until all init is complete, and then return + * 0 to return immediately, potentially doing nothing if it + * is not yet time for the next init. + */ +int exynos_lcd_check_next_stage(const void *blob, int can_block); +#endif diff --git a/src/cpu/samsung/exynos5250/sata.h b/src/cpu/samsung/exynos5250/sata.h new file mode 100644 index 0000000000..912228ea53 --- /dev/null +++ b/src/cpu/samsung/exynos5250/sata.h @@ -0,0 +1,27 @@ +/* + * Copyright (c) 2012 The Chromium OS Authors. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __EXYNOS5_SATA_H +#define __EXYNOS5_SATA_H + +int exynos5_sata_init(const void *blob); +#endif + diff --git a/src/cpu/samsung/exynos5250/setup.h b/src/cpu/samsung/exynos5250/setup.h new file mode 100644 index 0000000000..5e5923202a --- /dev/null +++ b/src/cpu/samsung/exynos5250/setup.h @@ -0,0 +1,756 @@ +/* + * Machine Specific Values for SMDK5250 board based on Exynos5 + * + * Copyright (C) 2012 Samsung Electronics + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _SMDK5250_SETUP_H +#define _SMDK5250_SETUP_H + +/* TZPC : Register Offsets */ +#define TZPC0_BASE 0x10100000 +#define TZPC1_BASE 0x10110000 +#define TZPC2_BASE 0x10120000 +#define TZPC3_BASE 0x10130000 +#define TZPC4_BASE 0x10140000 +#define TZPC5_BASE 0x10150000 +#define TZPC6_BASE 0x10160000 +#define TZPC7_BASE 0x10170000 +#define TZPC8_BASE 0x10180000 +#define TZPC9_BASE 0x10190000 + +/* APLL_CON1 */ +#define APLL_CON1_VAL (0x00203800) + +/* MPLL_CON1 */ +#define MPLL_CON1_VAL (0x00203800) + +/* CPLL_CON1 */ +#define CPLL_CON1_VAL (0x00203800) + +/* GPLL_CON1 */ +#define GPLL_CON1_VAL (0x00203800) + +/* EPLL_CON1, CON2 */ +#define EPLL_CON1_VAL 0x00000000 +#define EPLL_CON2_VAL 0x00000080 + +/* VPLL_CON1, CON2 */ +#define VPLL_CON1_VAL 0x00000000 +#define VPLL_CON2_VAL 0x00000080 + +/* BPLL_CON1 */ +#define BPLL_CON1_VAL 0x00203800 + +/* Set PLL */ +#define set_pll(mdiv, pdiv, sdiv) (1<<31 | mdiv<<16 | pdiv<<8 | sdiv) + +/* CLK_SRC_CPU */ +/* 0 = MOUTAPLL, 1 = SCLKMPLL */ +#define MUX_HPM_SEL 0 +#define MUX_CPU_SEL 0 +#define MUX_APLL_SEL 1 + +#define CLK_SRC_CPU_VAL ((MUX_HPM_SEL << 20) \ + | (MUX_CPU_SEL << 16) \ + | (MUX_APLL_SEL)) + +/* MEMCONTROL register bit fields */ +#define DMC_MEMCONTROL_CLK_STOP_DISABLE (0 << 0) +#define DMC_MEMCONTROL_DPWRDN_DISABLE (0 << 1) +#define DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE (0 << 2) +#define DMC_MEMCONTROL_TP_DISABLE (0 << 4) +#define DMC_MEMCONTROL_DSREF_DISABLE (0 << 5) +#define DMC_MEMCONTROL_DSREF_ENABLE (1 << 5) +#define DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(x) (x << 6) + +#define DMC_MEMCONTROL_MEM_TYPE_LPDDR3 (7 << 8) +#define DMC_MEMCONTROL_MEM_TYPE_DDR3 (6 << 8) +#define DMC_MEMCONTROL_MEM_TYPE_LPDDR2 (5 << 8) + +#define DMC_MEMCONTROL_MEM_WIDTH_32BIT (2 << 12) + +#define DMC_MEMCONTROL_NUM_CHIP_1 (0 << 16) +#define DMC_MEMCONTROL_NUM_CHIP_2 (1 << 16) + +#define DMC_MEMCONTROL_BL_8 (3 << 20) +#define DMC_MEMCONTROL_BL_4 (2 << 20) + +#define DMC_MEMCONTROL_PZQ_DISABLE (0 << 24) + +#define DMC_MEMCONTROL_MRR_BYTE_7_0 (0 << 25) +#define DMC_MEMCONTROL_MRR_BYTE_15_8 (1 << 25) +#define DMC_MEMCONTROL_MRR_BYTE_23_16 (2 << 25) +#define DMC_MEMCONTROL_MRR_BYTE_31_24 (3 << 25) + +/* MEMCONFIG0 register bit fields */ +#define DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED (1 << 12) +#define DMC_MEMCONFIGx_CHIP_COL_10 (3 << 8) +#define DMC_MEMCONFIGx_CHIP_ROW_14 (2 << 4) +#define DMC_MEMCONFIGx_CHIP_ROW_15 (3 << 4) +#define DMC_MEMCONFIGx_CHIP_BANK_8 (3 << 0) + +#define DMC_MEMBASECONFIGx_CHIP_BASE(x) (x << 16) +#define DMC_MEMBASECONFIGx_CHIP_MASK(x) (x << 0) +#define DMC_MEMBASECONFIG_VAL(x) ( \ + DMC_MEMBASECONFIGx_CHIP_BASE(x) | \ + DMC_MEMBASECONFIGx_CHIP_MASK(0x780) \ +) + +#define DMC_MEMBASECONFIG0_VAL DMC_MEMBASECONFIG_VAL(0x40) +#define DMC_MEMBASECONFIG1_VAL DMC_MEMBASECONFIG_VAL(0x80) + +#define DMC_PRECHCONFIG_VAL 0xFF000000 +#define DMC_PWRDNCONFIG_VAL 0xFFFF00FF + +#define DMC_CONCONTROL_RESET_VAL 0x0FFF0000 +#define DFI_INIT_START (1 << 28) +#define EMPTY (1 << 8) +#define AREF_EN (1 << 5) + +#define DFI_INIT_COMPLETE_CHO (1 << 2) +#define DFI_INIT_COMPLETE_CH1 (1 << 3) + +#define RDLVL_COMPLETE_CHO (1 << 14) +#define RDLVL_COMPLETE_CH1 (1 << 15) + +#define CLK_STOP_EN (1 << 0) +#define DPWRDN_EN (1 << 1) +#define DSREF_EN (1 << 5) + +/* COJCONTROL register bit fields */ +#define DMC_CONCONTROL_IO_PD_CON_DISABLE (0 << 3) +#define DMC_CONCONTROL_AREF_EN_DISABLE (0 << 5) +#define DMC_CONCONTROL_EMPTY_DISABLE (0 << 8) +#define DMC_CONCONTROL_EMPTY_ENABLE (1 << 8) +#define DMC_CONCONTROL_RD_FETCH_DISABLE (0x0 << 12) +#define DMC_CONCONTROL_TIMEOUT_LEVEL0 (0xFFF << 16) +#define DMC_CONCONTROL_DFI_INIT_START_DISABLE (0 << 28) + +/* CLK_DIV_CPU0_VAL */ +#define CLK_DIV_CPU0_VAL ((ARM2_RATIO << 28) \ + | (APLL_RATIO << 24) \ + | (PCLK_DBG_RATIO << 20) \ + | (ATB_RATIO << 16) \ + | (PERIPH_RATIO << 12) \ + | (ACP_RATIO << 8) \ + | (CPUD_RATIO << 4) \ + | (ARM_RATIO)) + + +/* CLK_FSYS */ +#define CLK_SRC_FSYS0_VAL 0x66666 +#define CLK_DIV_FSYS0_VAL 0x0BB00000 + +/* CLK_DIV_CPU1 */ +#define HPM_RATIO 0x2 +#define COPY_RATIO 0x0 + +/* CLK_DIV_CPU1 = 0x00000003 */ +#define CLK_DIV_CPU1_VAL ((HPM_RATIO << 4) \ + | (COPY_RATIO)) + +/* CLK_SRC_CORE0 */ +#define CLK_SRC_CORE0_VAL 0x00000000 + +/* CLK_SRC_CORE1 */ +#define CLK_SRC_CORE1_VAL 0x100 + +/* CLK_DIV_CORE0 */ +#define CLK_DIV_CORE0_VAL 0x00120000 + +/* CLK_DIV_CORE1 */ +#define CLK_DIV_CORE1_VAL 0x07070700 + +/* CLK_DIV_SYSRGT */ +#define CLK_DIV_SYSRGT_VAL 0x00000111 + +/* CLK_DIV_ACP */ +#define CLK_DIV_ACP_VAL 0x12 + +/* CLK_DIV_SYSLFT */ +#define CLK_DIV_SYSLFT_VAL 0x00000311 + +/* CLK_SRC_CDREX */ +#define CLK_SRC_CDREX_VAL 0x1 + +/* CLK_DIV_CDREX */ +#define MCLK_CDREX2_RATIO 0x0 +#define ACLK_EFCON_RATIO 0x1 +#define MCLK_DPHY_RATIO 0x1 +#define MCLK_CDREX_RATIO 0x1 +#define ACLK_C2C_200_RATIO 0x1 +#define C2C_CLK_400_RATIO 0x1 +#define PCLK_CDREX_RATIO 0x1 +#define ACLK_CDREX_RATIO 0x1 + +#define CLK_DIV_CDREX_VAL ((MCLK_DPHY_RATIO << 24) \ + | (C2C_CLK_400_RATIO << 6) \ + | (PCLK_CDREX_RATIO << 4) \ + | (ACLK_CDREX_RATIO)) + +/* CLK_SRC_TOP0 */ +#define MUX_ACLK_300_GSCL_SEL 0x0 +#define MUX_ACLK_300_GSCL_MID_SEL 0x0 +#define MUX_ACLK_400_G3D_MID_SEL 0x0 +#define MUX_ACLK_333_SEL 0x0 +#define MUX_ACLK_300_DISP1_SEL 0x0 +#define MUX_ACLK_300_DISP1_MID_SEL 0x0 +#define MUX_ACLK_200_SEL 0x0 +#define MUX_ACLK_166_SEL 0x0 +#define CLK_SRC_TOP0_VAL ((MUX_ACLK_300_GSCL_SEL << 25) \ + | (MUX_ACLK_300_GSCL_MID_SEL << 24) \ + | (MUX_ACLK_400_G3D_MID_SEL << 20) \ + | (MUX_ACLK_333_SEL << 16) \ + | (MUX_ACLK_300_DISP1_SEL << 15) \ + | (MUX_ACLK_300_DISP1_MID_SEL << 14) \ + | (MUX_ACLK_200_SEL << 12) \ + | (MUX_ACLK_166_SEL << 8)) + +/* CLK_SRC_TOP1 */ +#define MUX_ACLK_400_G3D_SEL 0x1 +#define MUX_ACLK_400_ISP_SEL 0x0 +#define MUX_ACLK_400_IOP_SEL 0x0 +#define MUX_ACLK_MIPI_HSI_TXBASE_SEL 0x0 +#define MUX_ACLK_300_GSCL_MID1_SEL 0x0 +#define MUX_ACLK_300_DISP1_MID1_SEL 0x0 +#define CLK_SRC_TOP1_VAL ((MUX_ACLK_400_G3D_SEL << 28) \ + |(MUX_ACLK_400_ISP_SEL << 24) \ + |(MUX_ACLK_400_IOP_SEL << 20) \ + |(MUX_ACLK_MIPI_HSI_TXBASE_SEL << 16) \ + |(MUX_ACLK_300_GSCL_MID1_SEL << 12) \ + |(MUX_ACLK_300_DISP1_MID1_SEL << 8)) + +/* CLK_SRC_TOP2 */ +#define MUX_GPLL_SEL 0x1 +#define MUX_BPLL_USER_SEL 0x0 +#define MUX_MPLL_USER_SEL 0x0 +#define MUX_VPLL_SEL 0x1 +#define MUX_EPLL_SEL 0x1 +#define MUX_CPLL_SEL 0x1 +#define VPLLSRC_SEL 0x0 +#define CLK_SRC_TOP2_VAL ((MUX_GPLL_SEL << 28) \ + | (MUX_BPLL_USER_SEL << 24) \ + | (MUX_MPLL_USER_SEL << 20) \ + | (MUX_VPLL_SEL << 16) \ + | (MUX_EPLL_SEL << 12) \ + | (MUX_CPLL_SEL << 8) \ + | (VPLLSRC_SEL)) +/* CLK_SRC_TOP3 */ +#define MUX_ACLK_333_SUB_SEL 0x1 +#define MUX_ACLK_400_SUB_SEL 0x1 +#define MUX_ACLK_266_ISP_SUB_SEL 0x1 +#define MUX_ACLK_266_GPS_SUB_SEL 0x0 +#define MUX_ACLK_300_GSCL_SUB_SEL 0x1 +#define MUX_ACLK_266_GSCL_SUB_SEL 0x1 +#define MUX_ACLK_300_DISP1_SUB_SEL 0x1 +#define MUX_ACLK_200_DISP1_SUB_SEL 0x1 +#define CLK_SRC_TOP3_VAL ((MUX_ACLK_333_SUB_SEL << 24) \ + | (MUX_ACLK_400_SUB_SEL << 20) \ + | (MUX_ACLK_266_ISP_SUB_SEL << 16) \ + | (MUX_ACLK_266_GPS_SUB_SEL << 12) \ + | (MUX_ACLK_300_GSCL_SUB_SEL << 10) \ + | (MUX_ACLK_266_GSCL_SUB_SEL << 8) \ + | (MUX_ACLK_300_DISP1_SUB_SEL << 6) \ + | (MUX_ACLK_200_DISP1_SUB_SEL << 4)) + +/* CLK_DIV_TOP0 */ +#define ACLK_300_DISP1_RATIO 0x2 +#define ACLK_400_G3D_RATIO 0x0 +#define ACLK_333_RATIO 0x0 +#define ACLK_266_RATIO 0x2 +#define ACLK_200_RATIO 0x3 +#define ACLK_166_RATIO 0x1 +#define ACLK_133_RATIO 0x1 +#define ACLK_66_RATIO 0x5 + +#define CLK_DIV_TOP0_VAL ((ACLK_300_DISP1_RATIO << 28) \ + | (ACLK_400_G3D_RATIO << 24) \ + | (ACLK_333_RATIO << 20) \ + | (ACLK_266_RATIO << 16) \ + | (ACLK_200_RATIO << 12) \ + | (ACLK_166_RATIO << 8) \ + | (ACLK_133_RATIO << 4) \ + | (ACLK_66_RATIO)) + +/* CLK_DIV_TOP1 */ +#define ACLK_MIPI_HSI_TX_BASE_RATIO 0x3 +#define ACLK_66_PRE_RATIO 0x1 +#define ACLK_400_ISP_RATIO 0x1 +#define ACLK_400_IOP_RATIO 0x1 +#define ACLK_300_GSCL_RATIO 0x2 + +#define CLK_DIV_TOP1_VAL ((ACLK_MIPI_HSI_TX_BASE_RATIO << 28) \ + | (ACLK_66_PRE_RATIO << 24) \ + | (ACLK_400_ISP_RATIO << 20) \ + | (ACLK_400_IOP_RATIO << 16) \ + | (ACLK_300_GSCL_RATIO << 12)) + +/* APLL_LOCK */ +#define APLL_LOCK_VAL (0x546) +/* MPLL_LOCK */ +#define MPLL_LOCK_VAL (0x546) +/* CPLL_LOCK */ +#define CPLL_LOCK_VAL (0x546) +/* GPLL_LOCK */ +#define GPLL_LOCK_VAL (0x546) +/* EPLL_LOCK */ +#define EPLL_LOCK_VAL (0x3A98) +/* VPLL_LOCK */ +#define VPLL_LOCK_VAL (0x3A98) +/* BPLL_LOCK */ +#define BPLL_LOCK_VAL (0x546) + +#define MUX_MCLK_CDREX_SEL (1 << 4) +#define MUX_MCLK_DPHY_SEL (1 << 8) + +#define MUX_APLL_SEL_MASK (1 << 0) +#define MUX_MPLL_FOUT_SEL (1 << 4) +#define MUX_BPLL_FOUT_SEL (1 << 0) +#define MUX_MPLL_SEL_MASK (1 << 8) +#define MPLL_SEL_MOUT_MPLLFOUT (2 << 8) +#define MUX_CPLL_SEL_MASK (1 << 8) +#define MUX_EPLL_SEL_MASK (1 << 12) +#define MUX_VPLL_SEL_MASK (1 << 16) +#define MUX_GPLL_SEL_MASK (1 << 28) +#define MUX_BPLL_SEL_MASK (1 << 0) +#define MUX_HPM_SEL_MASK (1 << 20) +#define HPM_SEL_SCLK_MPLL (1 << 21) +#define APLL_CON0_LOCKED (1 << 29) +#define MPLL_CON0_LOCKED (1 << 29) +#define BPLL_CON0_LOCKED (1 << 29) +#define CPLL_CON0_LOCKED (1 << 29) +#define EPLL_CON0_LOCKED (1 << 29) +#define GPLL_CON0_LOCKED (1 << 29) +#define VPLL_CON0_LOCKED (1 << 29) +#define CLK_REG_DISABLE 0x0 +#define TOP2_VAL 0x0110000 + +/* CLK_SRC_PERIC0 */ +#define PWM_SEL 6 +#define UART3_SEL 6 +#define UART2_SEL 6 +#define UART1_SEL 6 +#define UART0_SEL 6 +/* SRC_CLOCK = SCLK_MPLL */ +#define CLK_SRC_PERIC0_VAL ((PWM_SEL << 24) \ + | (UART3_SEL << 12) \ + | (UART2_SEL << 8) \ + | (UART1_SEL << 4) \ + | (UART0_SEL)) + +/* CLK_SRC_PERIC1 */ +/* SRC_CLOCK = SCLK_MPLL */ +#define SPI0_SEL 6 +#define SPI1_SEL 6 +#define SPI2_SEL 6 +#define CLK_SRC_PERIC1_VAL ((SPI2_SEL << 24) \ + | (SPI1_SEL << 20) \ + | (SPI0_SEL << 16)) + +/* SCLK_SRC_ISP - set SPI0/1 to 6 = SCLK_MPLL_USER */ +#define SPI0_ISP_SEL 6 +#define SPI1_ISP_SEL 6 +#define SCLK_SRC_ISP_VAL (SPI1_ISP_SEL << 4) \ + | (SPI0_ISP_SEL << 0) + +/* SCLK_DIV_ISP - set SPI0/1 to 0xf = divide by 16 */ +#define SPI0_ISP_RATIO 0xf +#define SPI1_ISP_RATIO 0xf +#define SCLK_DIV_ISP_VAL (SPI1_ISP_RATIO << 12) \ + | (SPI0_ISP_RATIO << 0) + +/* CLK_DIV_PERIL0 */ +#define UART5_RATIO 7 +#define UART4_RATIO 7 +#define UART3_RATIO 7 +#define UART2_RATIO 7 +#define UART1_RATIO 7 +#define UART0_RATIO 7 + +#define CLK_DIV_PERIC0_VAL ((UART3_RATIO << 12) \ + | (UART2_RATIO << 8) \ + | (UART1_RATIO << 4) \ + | (UART0_RATIO)) +/* CLK_DIV_PERIC1 */ +#define SPI1_RATIO 0x7 +#define SPI0_RATIO 0xf +#define SPI1_SUB_RATIO 0x0 +#define SPI0_SUB_RATIO 0x0 +#define CLK_DIV_PERIC1_VAL ((SPI1_SUB_RATIO << 24) \ + | ((SPI1_RATIO << 16) \ + | (SPI0_SUB_RATIO << 8) \ + | (SPI0_RATIO << 0))) + +/* CLK_DIV_PERIC2 */ +#define SPI2_RATIO 0xf +#define SPI2_SUB_RATIO 0x0 +#define CLK_DIV_PERIC2_VAL ((SPI2_SUB_RATIO << 8) \ + | (SPI2_RATIO << 0)) +/* CLK_DIV_FSYS2 */ +#define MMC2_RATIO_MASK 0xf +#define MMC2_RATIO_VAL 0x3 +#define MMC2_RATIO_OFFSET 0 + +#define MMC2_PRE_RATIO_MASK 0xff +#define MMC2_PRE_RATIO_VAL 0x9 +#define MMC2_PRE_RATIO_OFFSET 8 + +#define MMC3_RATIO_MASK 0xf +#define MMC3_RATIO_VAL 0x1 +#define MMC3_RATIO_OFFSET 16 + +#define MMC3_PRE_RATIO_MASK 0xff +#define MMC3_PRE_RATIO_VAL 0x0 +#define MMC3_PRE_RATIO_OFFSET 24 + +/* CLK_SRC_LEX */ +#define CLK_SRC_LEX_VAL 0x0 + +/* CLK_DIV_LEX */ +#define CLK_DIV_LEX_VAL 0x10 + +/* CLK_DIV_R0X */ +#define CLK_DIV_R0X_VAL 0x10 + +/* CLK_DIV_L0X */ +#define CLK_DIV_R1X_VAL 0x10 + +/* CLK_DIV_ISP0 */ +#define CLK_DIV_ISP0_VAL 0x31 + +/* CLK_DIV_ISP1 */ +#define CLK_DIV_ISP1_VAL 0x0 + +/* CLK_DIV_ISP2 */ +#define CLK_DIV_ISP2_VAL 0x1 + +/* CLK_SRC_DISP1_0 */ +#define CLK_SRC_DISP1_0_VAL 0x6 + +/* + * DIV_DISP1_0 + * For DP, divisor should be 2 + */ +#define CLK_DIV_DISP1_0_FIMD1 (2 << 0) + +/* CLK_GATE_IP_DISP1 */ +#define CLK_GATE_DP1_ALLOW (1 << 4) + +/* CLK_GATE_IP_SYSRGT */ +#define CLK_C2C_MASK (1 << 1) + +/* CLK_GATE_IP_ACP */ +#define CLK_SMMUG2D_MASK (1 << 7) +#define CLK_SMMUSSS_MASK (1 << 6) +#define CLK_SMMUMDMA_MASK (1 << 5) +#define CLK_ID_REMAPPER_MASK (1 << 4) +#define CLK_G2D_MASK (1 << 3) +#define CLK_SSS_MASK (1 << 2) +#define CLK_MDMA_MASK (1 << 1) +#define CLK_SECJTAG_MASK (1 << 0) + +/* CLK_GATE_BUS_SYSLFT */ +#define CLK_EFCLK_MASK (1 << 16) + +/* CLK_GATE_IP_ISP0 */ +#define CLK_UART_ISP_MASK (1 << 31) +#define CLK_WDT_ISP_MASK (1 << 30) +#define CLK_PWM_ISP_MASK (1 << 28) +#define CLK_MTCADC_ISP_MASK (1 << 27) +#define CLK_I2C1_ISP_MASK (1 << 26) +#define CLK_I2C0_ISP_MASK (1 << 25) +#define CLK_MPWM_ISP_MASK (1 << 24) +#define CLK_MCUCTL_ISP_MASK (1 << 23) +#define CLK_INT_COMB_ISP_MASK (1 << 22) +#define CLK_SMMU_MCUISP_MASK (1 << 13) +#define CLK_SMMU_SCALERP_MASK (1 << 12) +#define CLK_SMMU_SCALERC_MASK (1 << 11) +#define CLK_SMMU_FD_MASK (1 << 10) +#define CLK_SMMU_DRC_MASK (1 << 9) +#define CLK_SMMU_ISP_MASK (1 << 8) +#define CLK_GICISP_MASK (1 << 7) +#define CLK_ARM9S_MASK (1 << 6) +#define CLK_MCUISP_MASK (1 << 5) +#define CLK_SCALERP_MASK (1 << 4) +#define CLK_SCALERC_MASK (1 << 3) +#define CLK_FD_MASK (1 << 2) +#define CLK_DRC_MASK (1 << 1) +#define CLK_ISP_MASK (1 << 0) + +/* CLK_GATE_IP_ISP1 */ +#define CLK_SPI1_ISP_MASK (1 << 13) +#define CLK_SPI0_ISP_MASK (1 << 12) +#define CLK_SMMU3DNR_MASK (1 << 7) +#define CLK_SMMUDIS1_MASK (1 << 6) +#define CLK_SMMUDIS0_MASK (1 << 5) +#define CLK_SMMUODC_MASK (1 << 4) +#define CLK_3DNR_MASK (1 << 2) +#define CLK_DIS_MASK (1 << 1) +#define CLK_ODC_MASK (1 << 0) + +/* CLK_GATE_IP_GSCL */ +#define CLK_SMMUFIMC_LITE2_MASK (1 << 20) +#define CLK_SMMUFIMC_LITE1_MASK (1 << 12) +#define CLK_SMMUFIMC_LITE0_MASK (1 << 11) +#define CLK_SMMUGSCL3_MASK (1 << 10) +#define CLK_SMMUGSCL2_MASK (1 << 9) +#define CLK_SMMUGSCL1_MASK (1 << 8) +#define CLK_SMMUGSCL0_MASK (1 << 7) +#define CLK_GSCL_WRAP_B_MASK (1 << 6) +#define CLK_GSCL_WRAP_A_MASK (1 << 5) +#define CLK_CAMIF_TOP_MASK (1 << 4) +#define CLK_GSCL3_MASK (1 << 3) +#define CLK_GSCL2_MASK (1 << 2) +#define CLK_GSCL1_MASK (1 << 1) +#define CLK_GSCL0_MASK (1 << 0) + +/* CLK_GATE_IP_MFC */ +#define CLK_SMMUMFCR_MASK (1 << 2) +#define CLK_SMMUMFCL_MASK (1 << 1) +#define CLK_MFC_MASK (1 << 0) + +#define SCLK_MPWM_ISP_MASK (1 << 0) + +/* CLK_GATE_IP_DISP1 */ +#define CLK_SMMUTVX_MASK (1 << 9) +#define CLK_ASYNCTVX_MASK (1 << 7) +#define CLK_HDMI_MASK (1 << 6) +#define CLK_MIXER_MASK (1 << 5) +#define CLK_DSIM1_MASK (1 << 3) + +/* CLK_GATE_IP_GEN */ +#define CLK_SMMUMDMA1_MASK (1 << 9) +#define CLK_SMMUJPEG_MASK (1 << 7) +#define CLK_SMMUROTATOR_MASK (1 << 6) +#define CLK_MDMA1_MASK (1 << 4) +#define CLK_JPEG_MASK (1 << 2) +#define CLK_ROTATOR_MASK (1 << 1) + +/* CLK_GATE_IP_FSYS */ +#define CLK_WDT_IOP_MASK (1 << 30) +#define CLK_SMMUMCU_IOP_MASK (1 << 26) +#define CLK_SATA_PHY_I2C_MASK (1 << 25) +#define CLK_SATA_PHY_CTRL_MASK (1 << 24) +#define CLK_MCUCTL_MASK (1 << 23) +#define CLK_NFCON_MASK (1 << 22) +#define CLK_SMMURTIC_MASK (1 << 11) +#define CLK_RTIC_MASK (1 << 9) +#define CLK_MIPI_HSI_MASK (1 << 8) +#define CLK_USBOTG_MASK (1 << 7) +#define CLK_SATA_MASK (1 << 6) +#define CLK_PDMA1_MASK (1 << 2) +#define CLK_PDMA0_MASK (1 << 1) +#define CLK_MCU_IOP_MASK (1 << 0) + +/* CLK_GATE_IP_PERIC */ +#define CLK_HS_I2C3_MASK (1 << 31) +#define CLK_HS_I2C2_MASK (1 << 30) +#define CLK_HS_I2C1_MASK (1 << 29) +#define CLK_HS_I2C0_MASK (1 << 28) +#define CLK_AC97_MASK (1 << 27) +#define CLK_SPDIF_MASK (1 << 26) +#define CLK_PCM2_MASK (1 << 23) +#define CLK_PCM1_MASK (1 << 22) +#define CLK_I2S2_MASK (1 << 21) +#define CLK_I2S1_MASK (1 << 20) +#define CLK_SPI2_MASK (1 << 18) +#define CLK_SPI0_MASK (1 << 16) +#define CLK_I2CHDMI_MASK (1 << 14) +#define CLK_I2C7_MASK (1 << 13) +#define CLK_I2C6_MASK (1 << 12) +#define CLK_I2C5_MASK (1 << 11) +#define CLK_I2C4_MASK (1 << 10) +#define CLK_I2C3_MASK (1 << 9) +#define CLK_I2C2_MASK (1 << 8) +#define CLK_I2C1_MASK (1 << 7) +#define CLK_I2C0_MASK (1 << 6) + +/* CLK_GATE_IP_PERIS */ +#define CLK_RTC_MASK (1 << 20) +#define CLK_TZPC9_MASK (1 << 15) +#define CLK_TZPC8_MASK (1 << 14) +#define CLK_TZPC7_MASK (1 << 13) +#define CLK_TZPC6_MASK (1 << 12) +#define CLK_TZPC5_MASK (1 << 11) +#define CLK_TZPC4_MASK (1 << 10) +#define CLK_TZPC3_MASK (1 << 9) +#define CLK_TZPC2_MASK (1 << 8) +#define CLK_TZPC1_MASK (1 << 7) +#define CLK_TZPC0_MASK (1 << 6) +#define CLK_CHIPID_MASK (1 << 0) + +/* CLK_GATE_BLOCK */ +#define CLK_ACP_MASK (1 << 7) + +/* CLK_GATE_IP_CDREX */ +#define CLK_TZASC_DRBXW_MASK (1 << 23) +#define CLK_TZASC_DRBXR_MASK (1 << 22) +#define CLK_TZASC_XLBXW_MASK (1 << 21) +#define CLK_TZASC_XLBXR_MASK (1 << 20) +#define CLK_TZASC_XR1BXW_MASK (1 << 19) +#define CLK_TZASC_XR1BXR_MASK (1 << 18) +#define CLK_DPHY1_MASK (1 << 5) +#define CLK_DPHY0_MASK (1 << 4) + +/* + * TZPC Register Value : + * R0SIZE: 0x0 : Size of secured ram + */ +#define R0SIZE 0x0 + +/* + * TZPC Decode Protection Register Value : + * DECPROTXSET: 0xFF : Set Decode region to non-secure + */ +#define DECPROTXSET 0xFF + +#define LPDDR3PHY_CTRL_PHY_RESET (1 << 0) +#define LPDDR3PHY_CTRL_PHY_RESET_OFF (0 << 0) + +#define PHY_CON0_RESET_VAL 0x17020a40 +#define P0_CMD_EN (1 << 14) +#define BYTE_RDLVL_EN (1 << 13) +#define CTRL_SHGATE (1 << 8) + +#define PHY_CON1_RESET_VAL 0x09210100 +#define CTRL_GATEDURADJ_MASK (0xf << 20) + +#define PHY_CON2_RESET_VAL 0x00010004 +#define INIT_DESKEW_EN (1 << 6) +#define RDLVL_GATE_EN (1 << 24) + +/*ZQ Configurations */ +#define PHY_CON16_RESET_VAL 0x08000304 + +#define ZQ_CLK_DIV_EN (1 << 18) +#define ZQ_MANUAL_STR (1 << 1) +#define ZQ_DONE (1 << 0) + +#define CTRL_RDLVL_GATE_ENABLE 1 +#define CTRL_RDLVL_GATE_DISABLE 1 + +/* Direct Command */ +#define DIRECT_CMD_NOP 0x07000000 +#define DIRECT_CMD_PALL 0x01000000 +#define DIRECT_CMD_ZQINIT 0x0a000000 +#define DIRECT_CMD_CHANNEL_SHIFT 28 +#define DIRECT_CMD_CHIP_SHIFT 20 + +/* DMC PHY Control0 register */ +#define PHY_CONTROL0_RESET_VAL 0x0 +#define MEM_TERM_EN (1 << 31) /* Termination enable for memory */ +#define PHY_TERM_EN (1 << 30) /* Termination enable for PHY */ +#define DMC_CTRL_SHGATE (1 << 29) /* Duration of DQS gating signal */ +#define FP_RSYNC (1 << 3) /* Force DLL resyncronization */ + +/* Driver strength for CK, CKE, CS & CA */ +#define IMP_OUTPUT_DRV_40_OHM 0x5 +#define IMP_OUTPUT_DRV_30_OHM 0x7 +#define CA_CK_DRVR_DS_OFFSET 9 +#define CA_CKE_DRVR_DS_OFFSET 6 +#define CA_CS_DRVR_DS_OFFSET 3 +#define CA_ADR_DRVR_DS_OFFSET 0 + +#define PHY_CON42_CTRL_BSTLEN_SHIFT 8 +#define PHY_CON42_CTRL_RDLAT_SHIFT 0 + +struct mem_timings; + +/* Errors that we can encourter in low-level setup */ +enum { + SETUP_ERR_OK, + SETUP_ERR_RDLV_COMPLETE_TIMEOUT = -1, + SETUP_ERR_ZQ_CALIBRATION_FAILURE = -2, +}; + +/* Functions common between LPDDR2 and DDR3 */ +void sdelay(unsigned long); + +/* CPU info initialization code */ +void cpu_info_init(void); + +void mem_ctrl_init(void); +/* + * Memory variant specific initialization code + * + * @param mem Memory timings for this memory type. + * @param mem_iv_size Memory interleaving size is a configurable parameter + * which the DMC uses to decide how to split a memory + * chunk into smaller chunks to support concurrent + * accesses; may vary across boards. + * @return 0 if ok, SETUP_ERR_... if there is a problem + */ +int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size); + +/* FIXME(dhendrix): why is this here? commenting it out and we'll use + clock_init.h instead */ +//void system_clock_init(void); + +void tzpc_init(void); +/* + * Configure ZQ I/O interface + * + * @param mem Memory timings for this memory type. + * @param phy0_ctrl Pointer to struct containing PHY0 control reg + * @param phy1_ctrl Pointer to struct containing PHY1 control reg + * @return 0 if ok, -1 on error + */ +int dmc_config_zq(struct mem_timings *mem, + struct exynos5_phy_control *phy0_ctrl, + struct exynos5_phy_control *phy1_ctrl); + +/* + * Send NOP and MRS/EMRS Direct commands + * + * @param mem Memory timings for this memory type. + * @param dmc Pointer to struct of DMC registers + */ +void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc); + +/* + * Send PALL Direct commands + * + * @param mem Memory timings for this memory type. + * @param dmc Pointer to struct of DMC registers + */ +void dmc_config_prech(struct mem_timings *mem, struct exynos5_dmc *dmc); + +/* + * Configure the memconfig and membaseconfig registers + * + * @param mem Memory timings for this memory type. + * @param exynos5_dmc Pointer to struct of DMC registers + */ +void dmc_config_memory(struct mem_timings *mem, struct exynos5_dmc *dmc); + +/* Set the PS-Hold drive value */ +void ps_hold_setup(void); +/* + * Reset the DLL. This function is common between DDR3 and LPDDR2. + * However, the reset value is different. So we are passing a flag + * ddr_mode to distinguish between LPDDR2 and DDR3. + * + * @param exynos5_dmc Pointer to struct of DMC registers + * @param ddr_mode Type of DDR memory + */ +void update_reset_dll(struct exynos5_dmc *, enum ddr_mode); +#endif diff --git a/src/cpu/samsung/exynos5250/spi.h b/src/cpu/samsung/exynos5250/spi.h new file mode 100644 index 0000000000..3430ac1ab2 --- /dev/null +++ b/src/cpu/samsung/exynos5250/spi.h @@ -0,0 +1,89 @@ +/* + * (C) Copyright 2012 SAMSUNG Electronics + * Padmavathi Venna <padma.v@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_EXYNOS_COMMON_SPI_H_ +#define __ASM_ARCH_EXYNOS_COMMON_SPI_H_ + +#ifndef __ASSEMBLY__ + +/* SPI peripheral register map; padded to 64KB */ +struct exynos_spi { + unsigned int ch_cfg; /* 0x00 */ + unsigned char reserved0[4]; + unsigned int mode_cfg; /* 0x08 */ + unsigned int cs_reg; /* 0x0c */ + unsigned char reserved1[4]; + unsigned int spi_sts; /* 0x14 */ + unsigned int tx_data; /* 0x18 */ + unsigned int rx_data; /* 0x1c */ + unsigned int pkt_cnt; /* 0x20 */ + unsigned char reserved2[4]; + unsigned int swap_cfg; /* 0x28 */ + unsigned int fb_clk; /* 0x2c */ + unsigned char padding[0xffd0]; +}; + +#define EXYNOS_SPI_MAX_FREQ 50000000 + +#define SPI_TIMEOUT_MS 10 + +#define SF_READ_DATA_CMD 0x3 + +/* SPI_CHCFG */ +#define SPI_CH_HS_EN (1 << 6) +#define SPI_CH_RST (1 << 5) +#define SPI_SLAVE_MODE (1 << 4) +#define SPI_CH_CPOL_L (1 << 3) +#define SPI_CH_CPHA_B (1 << 2) +#define SPI_RX_CH_ON (1 << 1) +#define SPI_TX_CH_ON (1 << 0) + +/* SPI_MODECFG */ +#define SPI_MODE_CH_WIDTH_WORD (0x2 << 29) +#define SPI_MODE_BUS_WIDTH_WORD (0x2 << 17) + +/* SPI_CSREG */ +#define SPI_SLAVE_SIG_INACT (1 << 0) + +/* SPI_STS */ +#define SPI_ST_TX_DONE (1 << 25) +#define SPI_FIFO_LVL_MASK 0x1ff +#define SPI_TX_LVL_OFFSET 6 +#define SPI_RX_LVL_OFFSET 15 + +/* Feedback Delay */ +#define SPI_CLK_BYPASS (0 << 0) +#define SPI_FB_DELAY_90 (1 << 0) +#define SPI_FB_DELAY_180 (2 << 0) +#define SPI_FB_DELAY_270 (3 << 0) + +/* Packet Count */ +#define SPI_PACKET_CNT_EN (1 << 16) + +/* Swap config */ +#define SPI_TX_SWAP_EN (1 << 0) +#define SPI_TX_BYTE_SWAP (1 << 2) +#define SPI_TX_HWORD_SWAP (1 << 3) +#define SPI_TX_BYTE_SWAP (1 << 2) +#define SPI_RX_SWAP_EN (1 << 4) +#define SPI_RX_BYTE_SWAP (1 << 6) +#define SPI_RX_HWORD_SWAP (1 << 7) + +#endif /* __ASSEMBLY__ */ +#endif diff --git a/src/cpu/samsung/exynos5250/sys_proto.h b/src/cpu/samsung/exynos5250/sys_proto.h new file mode 100644 index 0000000000..f25dcd1170 --- /dev/null +++ b/src/cpu/samsung/exynos5250/sys_proto.h @@ -0,0 +1,27 @@ +/* + * (C) Copyright 2012 Samsung Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#ifndef __ASM_ARM_ARCH_EXYNOS5_SYS_PROTO_H__ +#define __ASM_ARM_ARCH_EXYNOS5_SYS_PROTO_H__ + +#include <asm/arch-exynos/sys_proto.h> + +#endif /* __ASM_ARM_ARCH_EXYNOS5_SYS_PROTO_H__ */ diff --git a/src/cpu/samsung/exynos5250/sysreg.h b/src/cpu/samsung/exynos5250/sysreg.h new file mode 100644 index 0000000000..f081495ea1 --- /dev/null +++ b/src/cpu/samsung/exynos5250/sysreg.h @@ -0,0 +1,36 @@ +/* + * (C) Copyright 2012 Samsung Electronics + * Register map for Exynos5 sysreg + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __EXYNOS5_SYSREG_H__ +#define __EXYNOS5_SYSREG_H__ + +/* sysreg map */ +struct exynos5_sysreg { + /* Add registers as and when required */ + unsigned char res1[0x214]; + unsigned int disp1blk_cfg; + unsigned char res2[0x18]; + unsigned int usb20_phy_cfg; +}; + +#define FIMDBYPASS_DISP1 (1 << 15) +#define USB20_PHY_CFG_EN (1 << 0) + +#endif diff --git a/src/cpu/samsung/exynos5250/tzpc.h b/src/cpu/samsung/exynos5250/tzpc.h new file mode 100644 index 0000000000..b9937b84b5 --- /dev/null +++ b/src/cpu/samsung/exynos5250/tzpc.h @@ -0,0 +1,52 @@ +/* + * (C) Copyright 2012 Samsung Electronics + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#ifndef __TZPC_H_ +#define __TZPC_H_ + +#ifndef __ASSEMBLER__ +struct exynos5_tzpc { + unsigned int r0size; + char res1[0x7FC]; + unsigned int decprot0stat; + unsigned int decprot0set; + unsigned int decprot0clr; + unsigned int decprot1stat; + unsigned int decprot1set; + unsigned int decprot1clr; + unsigned int decprot2stat; + unsigned int decprot2set; + unsigned int decprot2clr; + unsigned int decprot3stat; + unsigned int decprot3set; + unsigned int decprot3clr; + char res2[0x7B0]; + unsigned int periphid0; + unsigned int periphid1; + unsigned int periphid2; + unsigned int periphid3; + unsigned int pcellid0; + unsigned int pcellid1; + unsigned int pcellid2; + unsigned int pcellid3; +}; +#endif + +#endif diff --git a/src/cpu/samsung/exynos5250/uart.h b/src/cpu/samsung/exynos5250/uart.h new file mode 100644 index 0000000000..8190c67cde --- /dev/null +++ b/src/cpu/samsung/exynos5250/uart.h @@ -0,0 +1,71 @@ +/* + * (C) Copyright 2012 The ChromiumOS Authors + * (C) Copyright 2009 Samsung Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * Heungjun Kim <riverful.kim@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * This file is based off of arch/arm/include/asm/arch-exynos5/uart.h + * from u-boot. + */ + +#ifndef __EXYNOS5_UART_H_ +#define __EXYNOS5_UART_H_ + +#include <types.h> + +/* FIXME: should these move into a Kconfig file? */ +#define EXYNOS5_UART0_BASE 0x12c00000 +#define EXYNOS5_UART1_BASE 0x12c10000 +#define EXYNOS5_UART2_BASE 0x12c20000 +#define EXYNOS5_UART3_BASE 0x12c30000 +#define EXYNOS5_ISP_UART_BASE 0x13190000 + +#if 0 +/* baudrate rest value */ +union br_rest { + unsigned short slot; /* udivslot */ + unsigned char value; /* ufracval */ +}; +#endif + +struct s5p_uart { + uint32_t ulcon; + uint32_t ucon; + uint32_t ufcon; + uint32_t umcon; + uint32_t utrstat; + uint32_t uerstat; + uint32_t ufstat; + uint32_t umstat; + uint8_t utxh; + uint8_t res1[3]; + uint8_t urxh; + uint8_t res2[3]; + uint32_t ubrdiv; + uint32_t ufracval; + uint32_t uintp; + uint32_t uints; + uint32_t uintm; +}; + +static inline int s5p_uart_divslot(void) +{ + return 0; +} + +#endif diff --git a/src/cpu/samsung/exynos5250/watchdog.h b/src/cpu/samsung/exynos5250/watchdog.h new file mode 100644 index 0000000000..f35dde47f9 --- /dev/null +++ b/src/cpu/samsung/exynos5250/watchdog.h @@ -0,0 +1,27 @@ +/* + * (C) Copyright 2012 Samsung Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#ifndef __ASM_ARM_ARCH_EXYNOS5_WATCHDOG_H__ +#define __ASM_ARM_ARCH_EXYNOS5_WATCHDOG_H__ + +#include <asm/arch-exynos/watchdog.h> + +#endif /* __ASM_ARM_ARCH_EXYNOS5_WATCHDOG_H__ */ |