diff options
Diffstat (limited to 'src/cpu/samsung/exynos5420/setup.h')
| -rw-r--r-- | src/cpu/samsung/exynos5420/setup.h | 158 |
1 files changed, 154 insertions, 4 deletions
diff --git a/src/cpu/samsung/exynos5420/setup.h b/src/cpu/samsung/exynos5420/setup.h index 34056f3978..7d486f0c15 100644 --- a/src/cpu/samsung/exynos5420/setup.h +++ b/src/cpu/samsung/exynos5420/setup.h @@ -1,4 +1,4 @@ -/* + /* * This file is part of the coreboot project. * * Copyright (C) 2012 Samsung Electronics @@ -27,6 +27,11 @@ enum ddr_mode; struct exynos5_phy_control; #define NOT_AVAILABLE 0 +#define DATA_MASK 0xFFFFF + +#define ENABLE_BIT 0x1 +#define DISABLE_BIT 0x0 +#define CA_SWAP_EN (1 << 0) /* TZPC : Register Offsets */ #define TZPC0_BASE 0x10100000 @@ -122,6 +127,7 @@ struct exynos5_phy_control; /* MEMCONFIG0 register bit fields */ #define DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED (1 << 12) +#define DMC_MEMCONFIG_CHIP_MAP_SPLIT (2 << 12) #define DMC_MEMCONFIGx_CHIP_COL_10 (3 << 8) #define DMC_MEMCONFIGx_CHIP_ROW_14 (2 << 4) #define DMC_MEMCONFIGx_CHIP_ROW_15 (3 << 4) @@ -201,6 +207,10 @@ struct exynos5_phy_control; /* CLK_SRC_CDREX */ #define CLK_SRC_CDREX_VAL 0x00000001 +#define MUX_MCLK_CDR_MSPLL (1 << 4) +#define MUX_BPLL_SEL_FOUTBPLL (1 << 0) +#define BPLL_SEL_MASK 0x7 +#define FOUTBPLL 2 /* CLK_DIV_CDREX */ #define CLK_DIV_CDREX0_VAL 0x30010100 @@ -620,39 +630,177 @@ struct exynos5_phy_control; #define CTRL_SHGATE (1 << 8) #define PHY_CON1_RESET_VAL 0x09210100 +#define RDLVL_PASS_ADJ_VAL 0x6 +#define RDLVL_PASS_ADJ_OFFSET 16 #define CTRL_GATEDURADJ_MASK (0xf << 20) +#define READ_LEVELLING_DDR3 0x0100 #define PHY_CON2_RESET_VAL 0x00010004 #define INIT_DESKEW_EN (1 << 6) +#define DLL_DESKEW_EN (1 << 12) #define RDLVL_GATE_EN (1 << 24) +#define RDLVL_EN (1 << 25) +#define RDLVL_INCR_ADJ (0x1 << 16) + +/* DREX_PAUSE */ +#define DREX_PAUSE_EN (1 << 0) + +#define BYPASS_EN (1 << 22) + +/********-----MEMMORY VAL----------***/ +#define PHY_CON0_VAL 0x17021A00 + +#define PHY_CON12_RESET_VAL 0x10100070 +#define PHY_CON12_VAL 0x10107F50 +#define CTRL_START (1 << 6) +#define CTRL_DLL_ON (1 << 5) +#define CTRL_FORCE_MASK (0x7F << 8) +#define CTRL_LOCK_COARSE_MASK (0x7F << 10) + + +#define CTRL_OFFSETD_RESET_VAL 0x8 +#define CTRL_OFFSETD_VAL 0x7F + +#define CTRL_OFFSETR0 0x7F +#define CTRL_OFFSETR1 0x7F +#define CTRL_OFFSETR2 0x7F +#define CTRL_OFFSETR3 0x7F +#define PHY_CON4_VAL (CTRL_OFFSETR0 << 0 | \ + CTRL_OFFSETR1 << 8 | \ + CTRL_OFFSETR2 << 16 | \ + CTRL_OFFSETR3 << 24) +#define PHY_CON4_RESET_VAL 0x08080808 + +#define CTRL_OFFSETW0 0x7F +#define CTRL_OFFSETW1 0x7F +#define CTRL_OFFSETW2 0x7F +#define CTRL_OFFSETW3 0x7F +#define PHY_CON6_VAL (CTRL_OFFSETW0 << 0 | \ + CTRL_OFFSETW1 << 8 | \ + CTRL_OFFSETW2 << 16 | \ + CTRL_OFFSETW3 << 24) +#define PHY_CON6_RESET_VAL 0x08080808 + +#define PHY_CON14_RESET_VAL 0x001F0000 +#define CTRL_PULLD_DQS 0xF +#define CTRL_PULLD_DQS_OFFSET 0 /*ZQ Configurations */ #define PHY_CON16_RESET_VAL 0x08000304 +#define ZQ_CLK_EN (1 << 27) #define ZQ_CLK_DIV_EN (1 << 18) +#define ZQ_MANUAL_MODE_OFFSET 2 +#define ZQ_LONG_CALIBRATION 0x1 #define ZQ_MANUAL_STR (1 << 1) #define ZQ_DONE (1 << 0) +#define ZQ_MODE_DDS_OFFSET 24 + +#define LONG_CALIBRATION (ZQ_LONG_CALIBRATION << ZQ_MANUAL_MODE_OFFSET) #define CTRL_RDLVL_GATE_ENABLE 1 -#define CTRL_RDLVL_GATE_DISABLE 1 +#define CTRL_RDLVL_GATE_DISABLE 0 +#define CTRL_RDLVL_DATA_ENABLE (1 << 1) /* Direct Command */ #define DIRECT_CMD_NOP 0x07000000 #define DIRECT_CMD_PALL 0x01000000 #define DIRECT_CMD_ZQINIT 0x0a000000 #define DIRECT_CMD_CHANNEL_SHIFT 28 #define DIRECT_CMD_CHIP_SHIFT 20 +#define DIRECT_CMD_REFA (5 << 24) +#define DIRECT_CMD_MRS1 0x71C00 +#define DIRECT_CMD_MRS2 0x10BFC +#define DIRECT_CMD_MRS3 0x0050C +#define DIRECT_CMD_MRS4 0x00868 +#define DIRECT_CMD_MRS5 0x00C04 + +/* Drive Strength */ +#define IMPEDANCE_48_OHM 4 +#define IMPEDANCE_40_OHM 5 +#define IMPEDANCE_34_OHM 6 +#define IMPEDANCE_30_OHM 7 +#define PHY_CON39_VAL_48_OHM 0x09240924 +#define PHY_CON39_VAL_40_OHM 0x0B6D0B6D +#define PHY_CON39_VAL_34_OHM 0x0DB60DB6 +#define PHY_CON39_VAL_30_OHM 0x0FFF0FFF + + +#define CTRL_BSTLEN_OFFSET 8 +#define CTRL_RDLAT_OFFSET 0 + +#define CMD_DEFAULT_LPDDR3 0xF +#define CMD_DEFUALT_OFFSET 0 +#define T_WRDATA_EN 0x7 +#define T_WRDATA_EN_DDR3 0x8 +#define T_WRDATA_EN_OFFSET 16 +#define T_WRDATA_EN_MASK 0x1f + +#define PHY_CON31_VAL 0x0C183060 +#define PHY_CON32_VAL 0x60C18306 +#define PHY_CON33_VAL 0x00000030 + +#define PHY_CON31_RESET_VAL 0x0 +#define PHY_CON32_RESET_VAL 0x0 +#define PHY_CON33_RESET_VAL 0x0 + +#define SL_DLL_DYN_CON_EN (1 << 1) +#define FP_RESYNC (1 << 3) +#define CTRL_START (1 << 6) + +#define DMC_AREF_EN (1 << 5) +#define DMC_CONCONTROL_EMPTY (1 << 8) +#define DFI_INIT_START (1 << 28) + +#define DMC_MEMCONTROL_VAL 0x00312700 +#define CLK_STOP_EN (1 << 0) +#define DPWRDN_EN (1 << 1) +#define DSREF_EN (1 << 5) + +/* As we use channel interleaving, therefore value of the base address + * register must be set as half of the bus base address + * RAM start addess is 0x2000_0000 which means chip_base is 0x20, so + * we need to set half 0x10 to the membaseconfigx registers + * see exynos5420 UM section 17.17.3.21 for more + */ +#define DMC_CHIP_BASE_0 0x10 +#define DMC_CHIP_BASE_1 0x50 +#define DMC_CHIP_MASK 0x7C0 + +#define MEMBASECONFIG_CHIP_MASK_VAL 0x7E0 +#define MEMBASECONFIG_CHIP_MASK_OFFSET 0 +#define MEMBASECONFIG0_CHIP_BASE_VAL 0x20 +#define MEMBASECONFIG1_CHIP_BASE_VAL 0x40 +#define CHIP_BASE_OFFSET 16 + +#define MEMCONFIG_VAL 0x1323 +#define PRECHCONFIG_DEFAULT_VAL 0xFF000000 +#define PWRDNCONFIG_DEFAULT_VAL 0xFFFF00FF + +#define TIMINGAREF_VAL 0x5d +#define TIMINGROW_VAL 0x345A8692 +#define TIMINGDATA_VAL 0x3630065C +#define TIMINGPOWER_VAL 0x50380336 +#define DFI_INIT_COMPLETE (1 << 3) + +#define BRBRSVCONTROL_VAL 0x00000033 +#define BRBRSVCONFIG_VAL 0x88778877 /* DMC PHY Control0 register */ #define PHY_CONTROL0_RESET_VAL 0x0 #define MEM_TERM_EN (1 << 31) /* Termination enable for memory */ #define PHY_TERM_EN (1 << 30) /* Termination enable for PHY */ #define DMC_CTRL_SHGATE (1 << 29) /* Duration of DQS gating signal */ +#define CTRL_ATGATE (1 << 6) #define FP_RSYNC (1 << 3) /* Force DLL resyncronization */ /* Driver strength for CK, CKE, CS & CA */ #define IMP_OUTPUT_DRV_40_OHM 0x5 #define IMP_OUTPUT_DRV_30_OHM 0x7 +#define DA_3_DS_OFFSET 25 +#define DA_2_DS_OFFSET 22 +#define DA_1_DS_OFFSET 19 +#define DA_0_DS_OFFSET 16 #define CA_CK_DRVR_DS_OFFSET 9 #define CA_CKE_DRVR_DS_OFFSET 6 #define CA_CS_DRVR_DS_OFFSET 3 @@ -687,8 +835,10 @@ void mem_ctrl_init(void); * @param mem_reset Reset memory during initialization. * @return 0 if ok, SETUP_ERR_... if there is a problem */ -int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size, - int mem_reset); +int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset); + +/* Memory variant specific initialization code for LPDDR3 */ +int lpddr3_mem_ctrl_init(int reset); /* * Configure ZQ I/O interface |