diff options
Diffstat (limited to 'src/cpu/samsung/exynos5250')
| -rw-r--r-- | src/cpu/samsung/exynos5250/clock.c | 113 | ||||
| -rw-r--r-- | src/cpu/samsung/exynos5250/clock_init.c | 753 | ||||
| -rw-r--r-- | src/cpu/samsung/exynos5250/clock_init.h | 103 | ||||
| -rw-r--r-- | src/cpu/samsung/exynos5250/dmc.h | 98 |
4 files changed, 217 insertions, 850 deletions
diff --git a/src/cpu/samsung/exynos5250/clock.c b/src/cpu/samsung/exynos5250/clock.c index 0250d77a28..fc01387125 100644 --- a/src/cpu/samsung/exynos5250/clock.c +++ b/src/cpu/samsung/exynos5250/clock.c @@ -26,17 +26,107 @@ #include <stdlib.h> //#include <fdtdec.h> #include <arch/io.h> -//#include <asm/arch/clock.h> -//#include <asm/arch/clk.h> -#include <cpu/samsung/exynos5-common/clk.h> #include <cpu/samsung/exynos5250/clk.h> +#include <cpu/samsung/exynos5250/clock_init.h> #include <cpu/samsung/exynos5250/cpu.h> -#include <cpu/samsung/exynos5250/periph.h> #include <cpu/samsung/s5p-common/clk.h> /* input clock of PLL: SMDK5250 has 24MHz input clock */ #define CONFIG_SYS_CLK_FREQ 24000000 +struct arm_clk_ratios arm_clk_ratios[] = { + { + .arm_freq_mhz = 600, + + .apll_mdiv = 0xc8, + .apll_pdiv = 0x4, + .apll_sdiv = 0x1, + + .arm2_ratio = 0x0, + .apll_ratio = 0x1, + .pclk_dbg_ratio = 0x1, + .atb_ratio = 0x2, + .periph_ratio = 0x7, + .acp_ratio = 0x7, + .cpud_ratio = 0x1, + .arm_ratio = 0x0, + }, { + .arm_freq_mhz = 800, + + .apll_mdiv = 0x64, + .apll_pdiv = 0x3, + .apll_sdiv = 0x0, + + .arm2_ratio = 0x0, + .apll_ratio = 0x1, + .pclk_dbg_ratio = 0x1, + .atb_ratio = 0x3, + .periph_ratio = 0x7, + .acp_ratio = 0x7, + .cpud_ratio = 0x2, + .arm_ratio = 0x0, + }, { + .arm_freq_mhz = 1000, + + .apll_mdiv = 0x7d, + .apll_pdiv = 0x3, + .apll_sdiv = 0x0, + + .arm2_ratio = 0x0, + .apll_ratio = 0x1, + .pclk_dbg_ratio = 0x1, + .atb_ratio = 0x4, + .periph_ratio = 0x7, + .acp_ratio = 0x7, + .cpud_ratio = 0x2, + .arm_ratio = 0x0, + }, { + .arm_freq_mhz = 1200, + + .apll_mdiv = 0x96, + .apll_pdiv = 0x3, + .apll_sdiv = 0x0, + + .arm2_ratio = 0x0, + .apll_ratio = 0x3, + .pclk_dbg_ratio = 0x1, + .atb_ratio = 0x5, + .periph_ratio = 0x7, + .acp_ratio = 0x7, + .cpud_ratio = 0x3, + .arm_ratio = 0x0, + }, { + .arm_freq_mhz = 1400, + + .apll_mdiv = 0xaf, + .apll_pdiv = 0x3, + .apll_sdiv = 0x0, + + .arm2_ratio = 0x0, + .apll_ratio = 0x3, + .pclk_dbg_ratio = 0x1, + .atb_ratio = 0x6, + .periph_ratio = 0x7, + .acp_ratio = 0x7, + .cpud_ratio = 0x3, + .arm_ratio = 0x0, + }, { + .arm_freq_mhz = 1700, + + .apll_mdiv = 0x1a9, + .apll_pdiv = 0x6, + .apll_sdiv = 0x0, + + .arm2_ratio = 0x0, + .apll_ratio = 0x3, + .pclk_dbg_ratio = 0x1, + .atb_ratio = 0x6, + .periph_ratio = 0x7, + .acp_ratio = 0x7, + .cpud_ratio = 0x3, + .arm_ratio = 0x0, + } +}; /* src_bit div_bit prediv_bit */ static struct clk_bit_info clk_bit_info[PERIPH_ID_COUNT] = { @@ -269,6 +359,21 @@ unsigned long get_arm_clk(void) return armclk; } +struct arm_clk_ratios *get_arm_clk_ratios(void) +{ + struct arm_clk_ratios *arm_ratio; + unsigned long arm_freq = 1700; /* FIXME: use get_arm_clk() */ + int i; + + for (i = 0, arm_ratio = arm_clk_ratios; i < ARRAY_SIZE(arm_clk_ratios); + i++, arm_ratio++) { + if (arm_ratio->arm_freq_mhz == arm_freq) + return arm_ratio; + } + + return NULL; +} + /* exynos5: set the mmc clock */ void set_mmc_clk(int dev_index, unsigned int div) { diff --git a/src/cpu/samsung/exynos5250/clock_init.c b/src/cpu/samsung/exynos5250/clock_init.c index 53bab1a53a..4f21022fd1 100644 --- a/src/cpu/samsung/exynos5250/clock_init.c +++ b/src/cpu/samsung/exynos5250/clock_init.c @@ -29,772 +29,27 @@ #include <console/console.h> -#include <cpu/samsung/exynos5-common/spl.h> +/* FIXME: remove unneeded #includes */ #include <cpu/samsung/exynos5250/clk.h> +#include <cpu/samsung/exynos5250/clock_init.h> #include <cpu/samsung/exynos5250/cpu.h> #include <cpu/samsung/exynos5250/dmc.h> #include <cpu/samsung/exynos5250/s5p-dp.h> #include <cpu/samsung/s5p-common/clk.h> -#include "clock_init.h" #include "setup.h" -struct arm_clk_ratios arm_clk_ratios[] = { - { - .arm_freq_mhz = 600, - - .apll_mdiv = 0xc8, - .apll_pdiv = 0x4, - .apll_sdiv = 0x1, - - .arm2_ratio = 0x0, - .apll_ratio = 0x1, - .pclk_dbg_ratio = 0x1, - .atb_ratio = 0x2, - .periph_ratio = 0x7, - .acp_ratio = 0x7, - .cpud_ratio = 0x1, - .arm_ratio = 0x0, - }, { - .arm_freq_mhz = 800, - - .apll_mdiv = 0x64, - .apll_pdiv = 0x3, - .apll_sdiv = 0x0, - - .arm2_ratio = 0x0, - .apll_ratio = 0x1, - .pclk_dbg_ratio = 0x1, - .atb_ratio = 0x3, - .periph_ratio = 0x7, - .acp_ratio = 0x7, - .cpud_ratio = 0x2, - .arm_ratio = 0x0, - }, { - .arm_freq_mhz = 1000, - - .apll_mdiv = 0x7d, - .apll_pdiv = 0x3, - .apll_sdiv = 0x0, - - .arm2_ratio = 0x0, - .apll_ratio = 0x1, - .pclk_dbg_ratio = 0x1, - .atb_ratio = 0x4, - .periph_ratio = 0x7, - .acp_ratio = 0x7, - .cpud_ratio = 0x2, - .arm_ratio = 0x0, - }, { - .arm_freq_mhz = 1200, - - .apll_mdiv = 0x96, - .apll_pdiv = 0x3, - .apll_sdiv = 0x0, - - .arm2_ratio = 0x0, - .apll_ratio = 0x3, - .pclk_dbg_ratio = 0x1, - .atb_ratio = 0x5, - .periph_ratio = 0x7, - .acp_ratio = 0x7, - .cpud_ratio = 0x3, - .arm_ratio = 0x0, - }, { - .arm_freq_mhz = 1400, - - .apll_mdiv = 0xaf, - .apll_pdiv = 0x3, - .apll_sdiv = 0x0, - - .arm2_ratio = 0x0, - .apll_ratio = 0x3, - .pclk_dbg_ratio = 0x1, - .atb_ratio = 0x6, - .periph_ratio = 0x7, - .acp_ratio = 0x7, - .cpud_ratio = 0x3, - .arm_ratio = 0x0, - }, { - .arm_freq_mhz = 1700, - - .apll_mdiv = 0x1a9, - .apll_pdiv = 0x6, - .apll_sdiv = 0x0, - - .arm2_ratio = 0x0, - .apll_ratio = 0x3, - .pclk_dbg_ratio = 0x1, - .atb_ratio = 0x6, - .periph_ratio = 0x7, - .acp_ratio = 0x7, - .cpud_ratio = 0x3, - .arm_ratio = 0x0, - } -}; - -struct mem_timings mem_timings[] = { - { - .mem_manuf = MEM_MANUF_ELPIDA, - .mem_type = DDR_MODE_DDR3, - .frequency_mhz = 800, - .mpll_mdiv = 0x64, - .mpll_pdiv = 0x3, - .mpll_sdiv = 0x0, - .cpll_mdiv = 0xde, - .cpll_pdiv = 0x4, - .cpll_sdiv = 0x2, - .gpll_mdiv = 0x215, - .gpll_pdiv = 0xc, - .gpll_sdiv = 0x1, - .epll_mdiv = 0x60, - .epll_pdiv = 0x3, - .epll_sdiv = 0x3, - .vpll_mdiv = 0x96, - .vpll_pdiv = 0x3, - .vpll_sdiv = 0x2, - - .bpll_mdiv = 0x64, - .bpll_pdiv = 0x3, - .bpll_sdiv = 0x0, - .use_bpll = 0, - .pclk_cdrex_ratio = 0x5, - .direct_cmd_msr = { - 0x00020018, 0x00030000, 0x00010042, 0x00000d70 - }, - .timing_ref = 0x000000bb, - .timing_row = 0x8c36660f, - .timing_data = 0x3630580b, - .timing_power = 0x41000a44, - .phy0_dqs = 0x08080808, - .phy1_dqs = 0x08080808, - .phy0_dq = 0x08080808, - .phy1_dq = 0x08080808, - .phy0_tFS = 0x4, - .phy1_tFS = 0x4, - .phy0_pulld_dqs = 0xf, - .phy1_pulld_dqs = 0xf, - - .lpddr3_ctrl_phy_reset = 0x1, - .ctrl_start_point = 0x10, - .ctrl_inc = 0x10, - .ctrl_start = 0x1, - .ctrl_dll_on = 0x1, - .ctrl_ref = 0x8, - - .ctrl_force = 0x1a, - .ctrl_rdlat = 0x0b, - .ctrl_bstlen = 0x08, - - .fp_resync = 0x8, - .iv_size = 0x7, - .dfi_init_start = 1, - .aref_en = 1, - - .rd_fetch = 0x3, - - .zq_mode_dds = 0x7, - .zq_mode_term = 0x1, - .zq_mode_noterm = 0, - - /* - * Dynamic Clock: Always Running - * Memory Burst length: 8 - * Number of chips: 1 - * Memory Bus width: 32 bit - * Memory Type: DDR3 - * Additional Latancy for PLL: 0 Cycle - */ - .memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE | - DMC_MEMCONTROL_DPWRDN_DISABLE | - DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE | - DMC_MEMCONTROL_TP_DISABLE | - DMC_MEMCONTROL_DSREF_ENABLE | - DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) | - DMC_MEMCONTROL_MEM_TYPE_DDR3 | - DMC_MEMCONTROL_MEM_WIDTH_32BIT | - DMC_MEMCONTROL_NUM_CHIP_1 | - DMC_MEMCONTROL_BL_8 | - DMC_MEMCONTROL_PZQ_DISABLE | - DMC_MEMCONTROL_MRR_BYTE_7_0, - .memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED | - DMC_MEMCONFIGx_CHIP_COL_10 | - DMC_MEMCONFIGx_CHIP_ROW_15 | - DMC_MEMCONFIGx_CHIP_BANK_8, - .membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40), - .membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80), - .prechconfig_tp_cnt = 0xff, - .dpwrdn_cyc = 0xff, - .dsref_cyc = 0xffff, - .concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE | - DMC_CONCONTROL_TIMEOUT_LEVEL0 | - DMC_CONCONTROL_RD_FETCH_DISABLE | - DMC_CONCONTROL_EMPTY_DISABLE | - DMC_CONCONTROL_AREF_EN_DISABLE | - DMC_CONCONTROL_IO_PD_CON_DISABLE, - .dmc_channels = 2, - .chips_per_channel = 2, - .chips_to_configure = 1, - .send_zq_init = 1, - .impedance = IMP_OUTPUT_DRV_30_OHM, - .gate_leveling_enable = 0, - }, { - .mem_manuf = MEM_MANUF_SAMSUNG, - .mem_type = DDR_MODE_DDR3, - .frequency_mhz = 800, - .mpll_mdiv = 0x64, - .mpll_pdiv = 0x3, - .mpll_sdiv = 0x0, - .cpll_mdiv = 0xde, - .cpll_pdiv = 0x4, - .cpll_sdiv = 0x2, - .gpll_mdiv = 0x215, - .gpll_pdiv = 0xc, - .gpll_sdiv = 0x1, - .epll_mdiv = 0x60, - .epll_pdiv = 0x3, - .epll_sdiv = 0x3, - .vpll_mdiv = 0x96, - .vpll_pdiv = 0x3, - .vpll_sdiv = 0x2, - - .bpll_mdiv = 0x64, - .bpll_pdiv = 0x3, - .bpll_sdiv = 0x0, - .use_bpll = 0, - .pclk_cdrex_ratio = 0x5, - .direct_cmd_msr = { - 0x00020018, 0x00030000, 0x00010000, 0x00000d70 - }, - .timing_ref = 0x000000bb, - .timing_row = 0x8c36660f, - .timing_data = 0x3630580b, - .timing_power = 0x41000a44, - .phy0_dqs = 0x08080808, - .phy1_dqs = 0x08080808, - .phy0_dq = 0x08080808, - .phy1_dq = 0x08080808, - .phy0_tFS = 0x8, - .phy1_tFS = 0x8, - .phy0_pulld_dqs = 0xf, - .phy1_pulld_dqs = 0xf, - - .lpddr3_ctrl_phy_reset = 0x1, - .ctrl_start_point = 0x10, - .ctrl_inc = 0x10, - .ctrl_start = 0x1, - .ctrl_dll_on = 0x1, - .ctrl_ref = 0x8, - - .ctrl_force = 0x1a, - .ctrl_rdlat = 0x0b, - .ctrl_bstlen = 0x08, - - .fp_resync = 0x8, - .iv_size = 0x7, - .dfi_init_start = 1, - .aref_en = 1, - - .rd_fetch = 0x3, - - .zq_mode_dds = 0x5, - .zq_mode_term = 0x1, - .zq_mode_noterm = 1, - - /* - * Dynamic Clock: Always Running - * Memory Burst length: 8 - * Number of chips: 1 - * Memory Bus width: 32 bit - * Memory Type: DDR3 - * Additional Latancy for PLL: 0 Cycle - */ - .memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE | - DMC_MEMCONTROL_DPWRDN_DISABLE | - DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE | - DMC_MEMCONTROL_TP_DISABLE | - DMC_MEMCONTROL_DSREF_ENABLE | - DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) | - DMC_MEMCONTROL_MEM_TYPE_DDR3 | - DMC_MEMCONTROL_MEM_WIDTH_32BIT | - DMC_MEMCONTROL_NUM_CHIP_1 | - DMC_MEMCONTROL_BL_8 | - DMC_MEMCONTROL_PZQ_DISABLE | - DMC_MEMCONTROL_MRR_BYTE_7_0, - .memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED | - DMC_MEMCONFIGx_CHIP_COL_10 | - DMC_MEMCONFIGx_CHIP_ROW_15 | - DMC_MEMCONFIGx_CHIP_BANK_8, - .membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40), - .membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80), - .prechconfig_tp_cnt = 0xff, - .dpwrdn_cyc = 0xff, - .dsref_cyc = 0xffff, - .concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE | - DMC_CONCONTROL_TIMEOUT_LEVEL0 | - DMC_CONCONTROL_RD_FETCH_DISABLE | - DMC_CONCONTROL_EMPTY_DISABLE | - DMC_CONCONTROL_AREF_EN_DISABLE | - DMC_CONCONTROL_IO_PD_CON_DISABLE, - .dmc_channels = 2, - .chips_per_channel = 2, - .chips_to_configure = 1, - .send_zq_init = 1, - .impedance = IMP_OUTPUT_DRV_40_OHM, - .gate_leveling_enable = 1, - }, - { - .mem_manuf = MEM_MANUF_ELPIDA, - .mem_type = DDR_MODE_DDR3, - .frequency_mhz = 780, - .mpll_mdiv = 0x64, - .mpll_pdiv = 0x3, - .mpll_sdiv = 0x0, - .cpll_mdiv = 0xde, - .cpll_pdiv = 0x4, - .cpll_sdiv = 0x2, - .gpll_mdiv = 0x215, - .gpll_pdiv = 0xc, - .gpll_sdiv = 0x1, - .epll_mdiv = 0x60, - .epll_pdiv = 0x3, - .epll_sdiv = 0x3, - .vpll_mdiv = 0x96, - .vpll_pdiv = 0x3, - .vpll_sdiv = 0x2, - - .bpll_mdiv = 0x82, - .bpll_pdiv = 0x4, - .bpll_sdiv = 0x0, - .use_bpll = 1, - .pclk_cdrex_ratio = 0x5, - .direct_cmd_msr = { - 0x00020018, 0x00030000, 0x00010042, 0x00000d70 - }, - .timing_ref = 0x000000bb, - .timing_row = 0x8c36660f, - .timing_data = 0x3630580b, - .timing_power = 0x41000a44, - .phy0_dqs = 0x08080808, - .phy1_dqs = 0x08080808, - .phy0_dq = 0x08080808, - .phy1_dq = 0x08080808, - .phy0_tFS = 0x4, - .phy1_tFS = 0x4, - .phy0_pulld_dqs = 0xf, - .phy1_pulld_dqs = 0xf, - - .lpddr3_ctrl_phy_reset = 0x1, - .ctrl_start_point = 0x10, - .ctrl_inc = 0x10, - .ctrl_start = 0x1, - .ctrl_dll_on = 0x1, - .ctrl_ref = 0x8, - - .ctrl_force = 0x1a, - .ctrl_rdlat = 0x0b, - .ctrl_bstlen = 0x08, - - .fp_resync = 0x8, - .iv_size = 0x7, - .dfi_init_start = 1, - .aref_en = 1, - - .rd_fetch = 0x3, - - .zq_mode_dds = 0x7, - .zq_mode_term = 0x1, - .zq_mode_noterm = 0, - - /* - * Dynamic Clock: Always Running - * Memory Burst length: 8 - * Number of chips: 1 - * Memory Bus width: 32 bit - * Memory Type: DDR3 - * Additional Latancy for PLL: 0 Cycle - */ - .memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE | - DMC_MEMCONTROL_DPWRDN_DISABLE | - DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE | - DMC_MEMCONTROL_TP_DISABLE | - DMC_MEMCONTROL_DSREF_ENABLE | - DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) | - DMC_MEMCONTROL_MEM_TYPE_DDR3 | - DMC_MEMCONTROL_MEM_WIDTH_32BIT | - DMC_MEMCONTROL_NUM_CHIP_1 | - DMC_MEMCONTROL_BL_8 | - DMC_MEMCONTROL_PZQ_DISABLE | - DMC_MEMCONTROL_MRR_BYTE_7_0, - .memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED | - DMC_MEMCONFIGx_CHIP_COL_10 | - DMC_MEMCONFIGx_CHIP_ROW_15 | - DMC_MEMCONFIGx_CHIP_BANK_8, - .membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40), - .membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80), - .prechconfig_tp_cnt = 0xff, - .dpwrdn_cyc = 0xff, - .dsref_cyc = 0xffff, - .concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE | - DMC_CONCONTROL_TIMEOUT_LEVEL0 | - DMC_CONCONTROL_RD_FETCH_DISABLE | - DMC_CONCONTROL_EMPTY_DISABLE | - DMC_CONCONTROL_AREF_EN_DISABLE | - DMC_CONCONTROL_IO_PD_CON_DISABLE, - .dmc_channels = 2, - .chips_per_channel = 2, - .chips_to_configure = 1, - .send_zq_init = 1, - .impedance = IMP_OUTPUT_DRV_30_OHM, - .gate_leveling_enable = 0, - }, { - .mem_manuf = MEM_MANUF_SAMSUNG, - .mem_type = DDR_MODE_DDR3, - .frequency_mhz = 780, - .mpll_mdiv = 0x64, - .mpll_pdiv = 0x3, - .mpll_sdiv = 0x0, - .cpll_mdiv = 0xde, - .cpll_pdiv = 0x4, - .cpll_sdiv = 0x2, - .gpll_mdiv = 0x215, - .gpll_pdiv = 0xc, - .gpll_sdiv = 0x1, - .epll_mdiv = 0x60, - .epll_pdiv = 0x3, - .epll_sdiv = 0x3, - .vpll_mdiv = 0x96, - .vpll_pdiv = 0x3, - .vpll_sdiv = 0x2, - - .bpll_mdiv = 0x82, - .bpll_pdiv = 0x4, - .bpll_sdiv = 0x0, - .use_bpll = 1, - .pclk_cdrex_ratio = 0x5, - .direct_cmd_msr = { - 0x00020018, 0x00030000, 0x00010000, 0x00000d70 - }, - .timing_ref = 0x000000bb, - .timing_row = 0x8c36660f, - .timing_data = 0x3630580b, - .timing_power = 0x41000a44, - .phy0_dqs = 0x08080808, - .phy1_dqs = 0x08080808, - .phy0_dq = 0x08080808, - .phy1_dq = 0x08080808, - .phy0_tFS = 0x8, - .phy1_tFS = 0x8, - .phy0_pulld_dqs = 0xf, - .phy1_pulld_dqs = 0xf, - - .lpddr3_ctrl_phy_reset = 0x1, - .ctrl_start_point = 0x10, - .ctrl_inc = 0x10, - .ctrl_start = 0x1, - .ctrl_dll_on = 0x1, - .ctrl_ref = 0x8, - - .ctrl_force = 0x1a, - .ctrl_rdlat = 0x0b, - .ctrl_bstlen = 0x08, - - .fp_resync = 0x8, - .iv_size = 0x7, - .dfi_init_start = 1, - .aref_en = 1, - - .rd_fetch = 0x3, - - .zq_mode_dds = 0x5, - .zq_mode_term = 0x1, - .zq_mode_noterm = 1, - - /* - * Dynamic Clock: Always Running - * Memory Burst length: 8 - * Number of chips: 1 - * Memory Bus width: 32 bit - * Memory Type: DDR3 - * Additional Latancy for PLL: 0 Cycle - */ - .memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE | - DMC_MEMCONTROL_DPWRDN_DISABLE | - DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE | - DMC_MEMCONTROL_TP_DISABLE | - DMC_MEMCONTROL_DSREF_ENABLE | - DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) | - DMC_MEMCONTROL_MEM_TYPE_DDR3 | - DMC_MEMCONTROL_MEM_WIDTH_32BIT | - DMC_MEMCONTROL_NUM_CHIP_1 | - DMC_MEMCONTROL_BL_8 | - DMC_MEMCONTROL_PZQ_DISABLE | - DMC_MEMCONTROL_MRR_BYTE_7_0, - .memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED | - DMC_MEMCONFIGx_CHIP_COL_10 | - DMC_MEMCONFIGx_CHIP_ROW_15 | - DMC_MEMCONFIGx_CHIP_BANK_8, - .membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40), - .membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80), - .prechconfig_tp_cnt = 0xff, - .dpwrdn_cyc = 0xff, - .dsref_cyc = 0xffff, - .concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE | - DMC_CONCONTROL_TIMEOUT_LEVEL0 | - DMC_CONCONTROL_RD_FETCH_DISABLE | - DMC_CONCONTROL_EMPTY_DISABLE | - DMC_CONCONTROL_AREF_EN_DISABLE | - DMC_CONCONTROL_IO_PD_CON_DISABLE, - .dmc_channels = 2, - .chips_per_channel = 2, - .chips_to_configure = 1, - .send_zq_init = 1, - .impedance = IMP_OUTPUT_DRV_40_OHM, - .gate_leveling_enable = 1, - } -}; - -/** - * Detect what memory is present based on board strappings - * - * Boards have various resistor stuff options that are supposed to match - * which SDRAM is present (and which revision of the board this is). This - * uses the resistor stuff options to figure out what memory manufacturer - * to use for matching in the memory tables. - * - * @return A MEM_MANUF_XXX constant, or -1 if an error occurred. - */ -/* - * FIXME(dhendrix): This unwinds into a mess of board-specific code. The - * board's romstage.c file should detect the memory type and pass in - * appropriate parameters to whatever calls this. - */ -#define BOARD_REV_ELPIDA_MEMORY 3 -#define BOARD_REV_SAMSUNG_MEMORY 4 - -static inline int board_get_revision(void) -{ - /* FIXME: yuck! */ - return BOARD_REV_ELPIDA_MEMORY; -} - -static int autodetect_memory(void) -{ - int board_rev = board_get_revision(); - - if (board_rev == -1) - return -1; - - switch (board_rev) { - case BOARD_REV_SAMSUNG_MEMORY: - return MEM_MANUF_SAMSUNG; - case BOARD_REV_ELPIDA_MEMORY: - return MEM_MANUF_ELPIDA; - } - - return -1; -} - -#ifdef CONFIG_SPL_BUILD - -#define SIGNATURE 0xdeadbeef - -/* Parameters of early board initialization in SPL */ -static struct spl_machine_param machine_param = { - .signature = SIGNATURE, - .version = 1, - .params = "vmubfasirMw", - .size = sizeof(machine_param), - - .mem_iv_size = 0x1f, - .mem_type = DDR_MODE_DDR3, - - /* - * Set uboot_size to 0x100000 bytes. - * - * This is an overly conservative value chosen to accommodate all - * possible U-Boot image. You are advised to set this value to a - * smaller realistic size via scripts that modifies the .machine_param - * section of output U-Boot image. - */ - .uboot_size = 0x100000, - - .boot_source = BOOT_MODE_OM, - .frequency_mhz = 800, - .arm_freq_mhz = 1700, - .serial_base = 0x12c30000, - .i2c_base = 0x12c60000, -// .board_rev_gpios = GPIO_D00 | (GPIO_D01 << 16), - .mem_manuf = MEM_MANUF_SAMSUNG, -// .bad_wake_gpio = GPIO_Y10, -}; - -/** - * Get the required memory type and speed (SPL version). - * - * In SPL we have no device tree, so we use the machine parameters - */ -int clock_get_mem_selection(enum ddr_mode *mem_type, - unsigned *frequency_mhz, unsigned *arm_freq, - enum mem_manuf *mem_manuf) -{ - struct spl_machine_param *params; - - params = &machine_param; - *mem_type = params->mem_type; - *frequency_mhz = params->frequency_mhz; - *arm_freq = params->arm_freq_mhz; - if (params->mem_manuf == MEM_MANUF_AUTODETECT) { - *mem_manuf = autodetect_memory(); - if (*mem_manuf == -1) - return -1; - } else { - *mem_manuf = params->mem_manuf; - } - - return 0; -} - -#else - -static const char *mem_types[DDR_MODE_COUNT] = { - "DDR2", "DDR3", "LPDDR2", "LPDDR3" -}; - -static const char *mem_manufs[MEM_MANUF_COUNT] = { - "autodetect", "Elpida", "Samsung" -}; - -int clock_get_mem_selection(enum ddr_mode *mem_type, - unsigned *frequency_mhz, unsigned *arm_freq, - enum mem_manuf *mem_manuf) -{ - const char *typestr; - int node, i; - - node = fdtdec_next_compatible(gd->fdt_blob, 0, - COMPAT_SAMSUNG_EXYNOS_DMC); - if (node < 0) - die("No memory information available in device tree"); - typestr = fdt_getprop(gd->fdt_blob, node, "mem-type", NULL); - for (i = 0; i < DDR_MODE_COUNT; i++) { - if (!stricmp(typestr, mem_types[i])) - break; - } - if (i == DDR_MODE_COUNT) - die("Invalid memory type in device tree"); - *mem_type = i; - - typestr = fdt_getprop(gd->fdt_blob, node, "mem-manuf", NULL); - for (i = 0; i < MEM_MANUF_COUNT; i++) { - if (!stricmp(typestr, mem_manufs[i])) - break; - } - if (i == MEM_MANUF_COUNT) - die("Invalid memory manufacturer in device tree"); - - if (i == MEM_MANUF_AUTODETECT) { - *mem_manuf = autodetect_memory(); - if (*mem_manuf == -1) - return -1; - } else { - *mem_manuf = i; - } - - *frequency_mhz = fdtdec_get_int(gd->fdt_blob, node, "clock-frequency", - 0); - if (!*frequency_mhz) - die("Invalid memory frequency in device tree"); - - *arm_freq = fdtdec_get_int(gd->fdt_blob, node, "arm-frequency", 0); - /* TODO: Remove all these panics/dies, and just return an error code */ - if (!*arm_freq) - die("Invalid ARM frequency in device tree"); - - return 0; -} - -const char *clock_get_mem_type_name(enum ddr_mode mem_type) -{ - if (mem_type >= 0 && mem_type < DDR_MODE_COUNT) - return mem_types[mem_type]; - - return "<unknown>"; -} - -const char *clock_get_mem_manuf_name(enum mem_manuf mem_manuf) -{ - if (mem_manuf >= 0 && mem_manuf < MEM_MANUF_COUNT) - return mem_manufs[mem_manuf]; - - return "<unknown>"; -} -#endif - -/* Get the ratios for setting ARM clock */ -struct arm_clk_ratios *get_arm_ratios(void); /* FIXME: silence compiler... */ -struct arm_clk_ratios *get_arm_ratios(void) -{ - struct arm_clk_ratios *arm_ratio; - enum ddr_mode mem_type; - enum mem_manuf mem_manuf; - unsigned frequency_mhz, arm_freq; - int i; - - /* TODO(sjg@chromium.org): Return NULL and have caller deal with it */ - if (clock_get_mem_selection(&mem_type, &frequency_mhz, - &arm_freq, &mem_manuf)) - ; - for (i = 0, arm_ratio = arm_clk_ratios; i < ARRAY_SIZE(arm_clk_ratios); - i++, arm_ratio++) { - if (arm_ratio->arm_freq_mhz == arm_freq) - return arm_ratio; - } - -// die("get_arm_ratios: Failed to find ratio\n"); - return NULL; -} - -struct mem_timings *clock_get_mem_timings(void) -{ - /* FIXME: hard-coded for now */ - return &mem_timings[0]; -#if 0 - struct mem_timings *mem; - enum ddr_mode mem_type; - enum mem_manuf mem_manuf; - unsigned frequency_mhz, arm_freq; - int i; - - if (!clock_get_mem_selection(&mem_type, &frequency_mhz, - &arm_freq, &mem_manuf)) { - for (i = 0, mem = mem_timings; i < ARRAY_SIZE(mem_timings); - i++, mem++) { - if (mem->mem_type == mem_type && - mem->frequency_mhz == frequency_mhz && - mem->mem_manuf == mem_manuf) - return mem; - } - } - return NULL; -#endif -} - -void system_clock_init(void) +void system_clock_init(struct mem_timings *mem, + struct arm_clk_ratios *arm_clk_ratio) { struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE; struct exynos5_mct_regs *mct_regs = (struct exynos5_mct_regs *)EXYNOS5_MULTI_CORE_TIMER_BASE; - struct mem_timings *mem; - struct arm_clk_ratios *arm_clk_ratio; u32 val, tmp; /* Turn on the MCT as early as possible. */ mct_regs->g_tcon |= (1 << 8); - mem = clock_get_mem_timings(); - arm_clk_ratio = get_arm_ratios(); - clrbits_le32(&clk->src_cpu, MUX_APLL_SEL_MASK); do { val = readl(&clk->mux_stat_cpu); diff --git a/src/cpu/samsung/exynos5250/clock_init.h b/src/cpu/samsung/exynos5250/clock_init.h index 00561a0b58..3757e7d761 100644 --- a/src/cpu/samsung/exynos5250/clock_init.h +++ b/src/cpu/samsung/exynos5250/clock_init.h @@ -25,10 +25,6 @@ #ifndef __EXYNOS_CLOCK_INIT_H #define __EXYNOS_CLOCK_INIT_H -enum { - MEM_TIMINGS_MSR_COUNT = 4, -}; - /* These are the ratio's for configuring ARM clock */ struct arm_clk_ratios { unsigned int arm_freq_mhz; /* Frequency of ARM core in MHz */ @@ -47,104 +43,17 @@ struct arm_clk_ratios { unsigned int arm_ratio; }; -/* These are the memory timings for a particular memory type and speed */ -struct mem_timings { - enum mem_manuf mem_manuf; /* Memory manufacturer */ - enum ddr_mode mem_type; /* Memory type */ - unsigned int frequency_mhz; /* Frequency of memory in MHz */ - - /* Here follow the timing parameters for the selected memory */ - uint8_t apll_mdiv; - uint8_t apll_pdiv; - uint8_t apll_sdiv; - uint8_t mpll_mdiv; - uint8_t mpll_pdiv; - uint8_t mpll_sdiv; - uint8_t cpll_mdiv; - uint8_t cpll_pdiv; - uint8_t cpll_sdiv; - uint8_t gpll_pdiv; - uint16_t gpll_mdiv; - uint8_t gpll_sdiv; - uint8_t epll_mdiv; - uint8_t epll_pdiv; - uint8_t epll_sdiv; - uint8_t vpll_mdiv; - uint8_t vpll_pdiv; - uint8_t vpll_sdiv; - uint8_t bpll_mdiv; - uint8_t bpll_pdiv; - uint8_t bpll_sdiv; - uint8_t use_bpll; /* 1 to use BPLL for cdrex, 0 to use MPLL */ - uint8_t pclk_cdrex_ratio; - unsigned int direct_cmd_msr[MEM_TIMINGS_MSR_COUNT]; - - unsigned int timing_ref; - unsigned int timing_row; - unsigned int timing_data; - unsigned int timing_power; - - /* DQS, DQ, DEBUG offsets */ - unsigned int phy0_dqs; - unsigned int phy1_dqs; - unsigned int phy0_dq; - unsigned int phy1_dq; - uint8_t phy0_tFS; - uint8_t phy1_tFS; - uint8_t phy0_pulld_dqs; - uint8_t phy1_pulld_dqs; - - uint8_t lpddr3_ctrl_phy_reset; - uint8_t ctrl_start_point; - uint8_t ctrl_inc; - uint8_t ctrl_start; - uint8_t ctrl_dll_on; - uint8_t ctrl_ref; - - uint8_t ctrl_force; - uint8_t ctrl_rdlat; - uint8_t ctrl_bstlen; - - uint8_t fp_resync; - uint8_t iv_size; - uint8_t dfi_init_start; - uint8_t aref_en; - - uint8_t rd_fetch; - - uint8_t zq_mode_dds; - uint8_t zq_mode_term; - uint8_t zq_mode_noterm; /* 1 to allow termination disable */ - - unsigned int memcontrol; - unsigned int memconfig; - - unsigned int membaseconfig0; - unsigned int membaseconfig1; - unsigned int prechconfig_tp_cnt; - unsigned int dpwrdn_cyc; - unsigned int dsref_cyc; - unsigned int concontrol; - /* Channel and Chip Selection */ - uint8_t dmc_channels; /* number of memory channels */ - uint8_t chips_per_channel; /* number of chips per channel */ - uint8_t chips_to_configure; /* number of chips to configure */ - uint8_t send_zq_init; /* 1 to send this command */ - unsigned int impedance; /* drive strength impedeance */ - uint8_t gate_leveling_enable; /* check gate leveling is enabled */ -}; - /** - * Get the correct memory timings for our selected memory type and speed. - * - * This function can be called from SPL or the main U-Boot. + * Get the clock ratios for CPU configuration * - * @return pointer to the memory timings that we should use + * @return pointer to the clock ratios that we should use */ -struct mem_timings *clock_get_mem_timings(void); +struct arm_clk_ratios *get_arm_clk_ratios(void); /* * Initialize clock for the device */ -void system_clock_init(void); +struct mem_timings; +void system_clock_init(struct mem_timings *mem, + struct arm_clk_ratios *arm_clk_ratio); #endif diff --git a/src/cpu/samsung/exynos5250/dmc.h b/src/cpu/samsung/exynos5250/dmc.h index 9b1f29305d..0814c07afb 100644 --- a/src/cpu/samsung/exynos5250/dmc.h +++ b/src/cpu/samsung/exynos5250/dmc.h @@ -175,6 +175,10 @@ enum mem_manuf { MEM_MANUF_COUNT = 2, // fancy that. }; +enum { + MEM_TIMINGS_MSR_COUNT = 4, +}; + #define DMC_INTERLEAVE_SIZE 0x1f /* CONCONTROL register fields */ @@ -224,5 +228,99 @@ enum mem_manuf { #define PHY_CON42_CTRL_RDLAT_SHIFT 0 #define PHY_CON42_CTRL_RDLAT_MASK (0x1f << PHY_CON42_CTRL_RDLAT_SHIFT) +/* These are the memory timings for a particular memory type and speed */ +struct mem_timings { + enum mem_manuf mem_manuf; /* Memory manufacturer */ + enum ddr_mode mem_type; /* Memory type */ + unsigned int frequency_mhz; /* Frequency of memory in MHz */ + + /* Here follow the timing parameters for the selected memory */ + uint8_t apll_mdiv; + uint8_t apll_pdiv; + uint8_t apll_sdiv; + uint8_t mpll_mdiv; + uint8_t mpll_pdiv; + uint8_t mpll_sdiv; + uint8_t cpll_mdiv; + uint8_t cpll_pdiv; + uint8_t cpll_sdiv; + uint8_t gpll_pdiv; + uint16_t gpll_mdiv; + uint8_t gpll_sdiv; + uint8_t epll_mdiv; + uint8_t epll_pdiv; + uint8_t epll_sdiv; + uint8_t vpll_mdiv; + uint8_t vpll_pdiv; + uint8_t vpll_sdiv; + uint8_t bpll_mdiv; + uint8_t bpll_pdiv; + uint8_t bpll_sdiv; + uint8_t use_bpll; /* 1 to use BPLL for cdrex, 0 to use MPLL */ + uint8_t pclk_cdrex_ratio; + unsigned int direct_cmd_msr[MEM_TIMINGS_MSR_COUNT]; + + unsigned int timing_ref; + unsigned int timing_row; + unsigned int timing_data; + unsigned int timing_power; + + /* DQS, DQ, DEBUG offsets */ + unsigned int phy0_dqs; + unsigned int phy1_dqs; + unsigned int phy0_dq; + unsigned int phy1_dq; + uint8_t phy0_tFS; + uint8_t phy1_tFS; + uint8_t phy0_pulld_dqs; + uint8_t phy1_pulld_dqs; + + uint8_t lpddr3_ctrl_phy_reset; + uint8_t ctrl_start_point; + uint8_t ctrl_inc; + uint8_t ctrl_start; + uint8_t ctrl_dll_on; + uint8_t ctrl_ref; + + uint8_t ctrl_force; + uint8_t ctrl_rdlat; + uint8_t ctrl_bstlen; + + uint8_t fp_resync; + uint8_t iv_size; + uint8_t dfi_init_start; + uint8_t aref_en; + + uint8_t rd_fetch; + + uint8_t zq_mode_dds; + uint8_t zq_mode_term; + uint8_t zq_mode_noterm; /* 1 to allow termination disable */ + + unsigned int memcontrol; + unsigned int memconfig; + + unsigned int membaseconfig0; + unsigned int membaseconfig1; + unsigned int prechconfig_tp_cnt; + unsigned int dpwrdn_cyc; + unsigned int dsref_cyc; + unsigned int concontrol; + /* Channel and Chip Selection */ + uint8_t dmc_channels; /* number of memory channels */ + uint8_t chips_per_channel; /* number of chips per channel */ + uint8_t chips_to_configure; /* number of chips to configure */ + uint8_t send_zq_init; /* 1 to send this command */ + unsigned int impedance; /* drive strength impedeance */ + uint8_t gate_leveling_enable; /* check gate leveling is enabled */ +}; + +/** + * Get the correct memory timings for our selected memory type and speed. + * + * @return pointer to the memory timings that we should use + */ +struct mem_timings *get_mem_timings(void); + #endif #endif |