diff options
Diffstat (limited to 'src/cpu/samsung/exynos5250/tmu.c')
-rw-r--r-- | src/cpu/samsung/exynos5250/tmu.c | 215 |
1 files changed, 0 insertions, 215 deletions
diff --git a/src/cpu/samsung/exynos5250/tmu.c b/src/cpu/samsung/exynos5250/tmu.c deleted file mode 100644 index 1b5e9c2b64..0000000000 --- a/src/cpu/samsung/exynos5250/tmu.c +++ /dev/null @@ -1,215 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Samsung Electronics - * Copyright 2013 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* EXYNOS - Thermal Management Unit */ - -#include <console/console.h> -#include <arch/io.h> -#include "power.h" -#include "tmu.h" - -#define TRIMINFO_RELOAD 1 -#define CORE_EN 1 -#define THERM_TRIP_EN (1 << 12) - -#define INTEN_RISE0 1 -#define INTEN_RISE1 (1 << 4) -#define INTEN_RISE2 (1 << 8) -#define INTEN_FALL0 (1 << 16) -#define INTEN_FALL1 (1 << 20) -#define INTEN_FALL2 (1 << 24) - -#define TRIM_INFO_MASK 0xff - -#define INTCLEAR_RISE0 1 -#define INTCLEAR_RISE1 (1 << 4) -#define INTCLEAR_RISE2 (1 << 8) -#define INTCLEAR_FALL0 (1 << 16) -#define INTCLEAR_FALL1 (1 << 20) -#define INTCLEAR_FALL2 (1 << 24) -#define INTCLEARALL (INTCLEAR_RISE0 | INTCLEAR_RISE1 | \ - INTCLEAR_RISE2 | INTCLEAR_FALL0 | \ - INTCLEAR_FALL1 | INTCLEAR_FALL2) - -struct tmu_info exynos5250_tmu_info = { - .tmu_base = 0x10060000, - .tmu_mux = 6, - .data = { - .ts = { - .min_val = 25, - .max_val = 125, - .start_warning = 95, - .start_tripping = 105, - .hardware_tripping = 110, - }, - .efuse_min_value = 40, - .efuse_value = 55, - .efuse_max_value = 100, - .slope = 0x10008802, - }, - .dc_value = 25, -}; - -/* - * After reading temperature code from register, compensating - * its value and calculating celsius temperature, - * get current temperature. - * - * @return current temperature of the chip as sensed by TMU - */ -static int get_cur_temp(struct tmu_info *info) -{ - int cur_temp; - struct tmu_reg *reg = (struct tmu_reg *)info->tmu_base; - - /* Temperature code range between min 25 and max 125 */ - cur_temp = readl(®->current_temp) & 0xff; - - /* Calibrate current temperature */ - if (cur_temp) - cur_temp = cur_temp - info->te1 + info->dc_value; - - return cur_temp; -} - -/* - * Monitors status of the TMU device and exynos temperature - * - * @info TMU info - * @temp pointer to the current temperature value - * @return enum tmu_status_t value, code indicating event to execute - */ -enum tmu_status_t tmu_monitor(struct tmu_info *info, int *temp) -{ - if (info->tmu_state == TMU_STATUS_INIT) - return -1; - - int cur_temp; - struct tmu_data *data = &info->data; - - /* Read current temperature of the SOC */ - cur_temp = get_cur_temp(info); - *temp = cur_temp; - - /* Temperature code lies between min 25 and max 125 */ - if (cur_temp >= data->ts.start_tripping && - cur_temp <= data->ts.max_val) - return TMU_STATUS_TRIPPED; - else if (cur_temp >= data->ts.start_warning) - return TMU_STATUS_WARNING; - else if (cur_temp < data->ts.start_warning && - cur_temp >= data->ts.min_val) - return TMU_STATUS_NORMAL; - /* Temperature code does not lie between min 25 and max 125 */ - else { - info->tmu_state = TMU_STATUS_INIT; - printk(BIOS_DEBUG, "EXYNOS_TMU: Thermal reading failed\n"); - return -1; - } - return 0; -} - -/* - * Calibrate and calculate threshold values and - * enable interrupt levels - * - * @param info pointer to the tmu_info struct - */ -static void tmu_setup_parameters(struct tmu_info *info) -{ - unsigned int te_temp, con; - unsigned int warning_code, trip_code, hwtrip_code; - unsigned int cooling_temp; - unsigned int rising_value; - struct tmu_data *data = &info->data; - struct tmu_reg *reg = (struct tmu_reg *)info->tmu_base; - - /* Must reload for using efuse value at EXYNOS */ - writel(TRIMINFO_RELOAD, ®->triminfo_control); - - /* Get the compensation parameter */ - te_temp = readl(®->triminfo); - info->te1 = te_temp & TRIM_INFO_MASK; - info->te2 = ((te_temp >> 8) & TRIM_INFO_MASK); - - if ((data->efuse_min_value > info->te1) || - (info->te1 > data->efuse_max_value) - || (info->te2 != 0)) - info->te1 = data->efuse_value; - - /* Get RISING & FALLING Threshold value */ - warning_code = data->ts.start_warning - + info->te1 - info->dc_value; - trip_code = data->ts.start_tripping - + info->te1 - info->dc_value; - hwtrip_code = data->ts.hardware_tripping - + info->te1 - info->dc_value; - - cooling_temp = 0; - - rising_value = ((warning_code << 8) | - (trip_code << 16) | - (hwtrip_code << 24)); - - /* Set interrupt level */ - writel(rising_value, ®->threshold_temp_rise); - writel(cooling_temp, ®->threshold_temp_fall); - - /* - * Need to init all register settings after getting parameter info - * [28:23] vref [11:8] slope - Tuning parameter - * - * WARNING: this slope value writes into many bits in the tmu_control - * register, with the default FDT value of 268470274 (0x10008802) - * we are using this essentially sets the default register setting - * from the TRM for tmu_control. - * TODO(bhthompson): rewrite this code such that we are not performing - * a hard wipe of tmu_control and re verify functionality. - */ - writel(data->slope, ®->tmu_control); - - writel(INTCLEARALL, ®->intclear); - /* TMU core enable */ - con = readl(®->tmu_control); - con |= (info->tmu_mux << 20) | THERM_TRIP_EN | CORE_EN; - - writel(con, ®->tmu_control); - - /* Enable HW thermal trip */ - power_enable_hw_thermal_trip(); - - /* LEV1 LEV2 interrupt enable */ - writel(INTEN_RISE1 | INTEN_RISE2, ®->inten); -} - -/* - * Initialize TMU device - * - * @return int value, 0 for success - */ -int tmu_init(struct tmu_info *info) -{ - info->tmu_state = TMU_STATUS_INIT; - - tmu_setup_parameters(info); - info->tmu_state = TMU_STATUS_NORMAL; - - return 0; -} |