summaryrefslogtreecommitdiff
path: root/src/cpu/ppc/ppc4xx
diff options
context:
space:
mode:
Diffstat (limited to 'src/cpu/ppc/ppc4xx')
-rw-r--r--src/cpu/ppc/ppc4xx/ppc4xx.inc703
1 files changed, 34 insertions, 669 deletions
diff --git a/src/cpu/ppc/ppc4xx/ppc4xx.inc b/src/cpu/ppc/ppc4xx/ppc4xx.inc
index b365988d6c..a0b2bc8333 100644
--- a/src/cpu/ppc/ppc4xx/ppc4xx.inc
+++ b/src/cpu/ppc/ppc4xx/ppc4xx.inc
@@ -1,4 +1,3 @@
-#if 0
/*
* Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
* Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
@@ -48,24 +47,16 @@
* Base on the U-Boot Startup Code
*
* The processor starts at 0xfffffffc and the code is executed
- * from flash/rom.
- * in memory, but as long we don't jump around before relocating.
- * board_init lies at a quite high address and when the cpu has
- * jumped there, everything is ok.
- * This works because the cpu gives the FLASH (CS0) the whole
- * address space at startup, and board_init lies as a echo of
- * the flash somewhere up there in the memorymap.
+ * from flash/rom.
*
- * board_init will change CS0 to be positioned at the correct
- * address and (s)dram will be positioned at address 0
+ * The purpose of this code is:
+ * - initalize the processor to a known state
+ * - turn on the I cache so things execute at a reasonable speed
+ * - set up a temporary stack in D cache
*/
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
- .globl _start
-_start:
+#include "ppc4xx.h"
-/*****************************************************************************/
addi r4,r0,0x0000
mtspr sgr,r4
mtspr dcwr,r4
@@ -76,675 +67,49 @@ _start:
addi r4,r0,0x1000 /* set ME bit (Machine Exceptions) */
oris r4,r4,0x0002 /* set CE bit (Critical Exceptions) */
mtmsr r4 /* change MSR */
- addi r4,r0,(0xFFFF-0x10000) /* set r4 to 0xFFFFFFFF (status in the */
- /* dbsr is cleared by setting bits to 1) */
+ addi r4,r0,(0xFFFF-0x10000) /* set r4 to 0xFFFFFFFF (status in */
+ /* the dbsr is cleared by setting */
+ /* bits to 1) */
mtdbsr r4 /* clear/reset the dbsr */
- /*----------------------------------------------------------------------- */
- /* Invalidate I and D caches. Enable I cache for defined memory regions */
- /* to speed things up. Leave the D cache disabled for now. It will be */
- /* enabled/left disabled later based on user selected menu options. */
- /* Be aware that the I cache may be disabled later based on the menu */
- /* options as well. See miscLib/main.c. */
- /*----------------------------------------------------------------------- */
- bl invalidate_icache
- bl invalidate_dcache
-
- /*----------------------------------------------------------------------- */
- /* Enable two 128MB cachable regions. */
- /*----------------------------------------------------------------------- */
- addis r4,r0,0x8000
- addi r4,r4,0x0001
- mticcr r4 /* instruction cache */
- isync
-
- addis r4,r0,0x0000
- addi r4,r4,0x0000
- mtdccr r4 /* data cache */
-
-#if !(defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR))
- /*----------------------------------------------------------------------- */
- /* Tune the speed and size for flash CS0 */
- /*----------------------------------------------------------------------- */
- bl ext_bus_cntlr_init
-#endif
-
-#if defined(CONFIG_405EP)
- /*----------------------------------------------------------------------- */
- /* DMA Status, clear to come up clean */
- /*----------------------------------------------------------------------- */
- addis r3,r0, 0xFFFF /* Clear all existing DMA status */
- ori r3,r3, 0xFFFF
- mtdcr dmasr, r3
-
- bl ppc405ep_init /* do ppc405ep specific init */
-#endif /* CONFIG_405EP */
-
- /*----------------------------------------------------------------------- */
- /* Setup temporary stack in DCACHE or OCM if needed for SDRAM SPD. */
- /*----------------------------------------------------------------------- */
-#ifdef CFG_INIT_DCACHE_CS
- /*----------------------------------------------------------------------- */
- /* Memory Bank x (nothingness) initialization 1GB+64MEG */
- /* used as temporary stack pointer for stage0 */
- /*----------------------------------------------------------------------- */
- li r4,PBxAP
- mtdcr ebccfga,r4
- lis r4,0x0380
- ori r4,r4,0x0480
- mtdcr ebccfgd,r4
-
- addi r4,0,PBxCR
- mtdcr ebccfga,r4
- lis r4,0x400D
- ori r4,r4,0xa000
- mtdcr ebccfgd,r4
-
- /* turn on data chache for this region */
- lis r4,0x0080
- mtdccr r4
-
- /* set stack pointer and clear stack to known value */
-
- lis r1,CFG_INIT_RAM_ADDR@h
- ori r1,r1,CFG_INIT_SP_OFFSET@l
-
- li r4,2048 /* we store 2048 words to stack */
- mtctr r4
-
- lis r2,CFG_INIT_RAM_ADDR@h /* we also clear data area */
- ori r2,r2,CFG_INIT_RAM_END@l /* so cant copy value from r1 */
-
- lis r4,0xdead /* we store 0xdeaddead in the stack */
- ori r4,r4,0xdead
-
-..stackloop:
- stwu r4,-4(r2)
- bdnz ..stackloop
-
- li r0, 0 /* Make room for stack frame header and */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
- /*
- * Set up a dummy frame to store reset vector as return address.
- * this causes stack underflow to reset board.
- */
- stwu r1, -8(r1) /* Save back chain and move SP */
- addis r0, 0, RESET_VECTOR@h /* Address of reset vector */
- ori r0, r0, RESET_VECTOR@l
- stwu r1, -8(r1) /* Save back chain and move SP */
- stw r0, +12(r1) /* Save return addr (underflow vect) */
-#endif /* CFG_INIT_DCACHE_CS */
-
- /*----------------------------------------------------------------------- */
- /* Initialize SDRAM Controller */
- /*----------------------------------------------------------------------- */
- bl sdram_init
-
- /*
- * Setup temporary stack pointer only for boards
- * that do not use SDRAM SPD I2C stuff since it
- * is already initialized to use DCACHE or OCM
- * stacks.
- */
-#if !(defined(CFG_INIT_DCACHE_CS) || defined(CFG_TEMP_STACK_OCM))
- lis r1, CFG_INIT_RAM_ADDR@h
- ori r1,r1,CFG_INIT_SP_OFFSET /* set up the stack in SDRAM */
-
- li r0, 0 /* Make room for stack frame header and */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
/*
- * Set up a dummy frame to store reset vector as return address.
- * this causes stack underflow to reset board.
+ * Invalidate I and D caches. Enable I cache for defined memory
+ * regions to speed things up. Enable D cache for use as
+ * temporary memory until real memory is enabled.
*/
- stwu r1, -8(r1) /* Save back chain and move SP */
- lis r0, RESET_VECTOR@h /* Address of reset vector */
- ori r0, r0, RESET_VECTOR@l
- stwu r1, -8(r1) /* Save back chain and move SP */
- stw r0, +12(r1) /* Save return addr (underflow vect) */
-#endif /* !(CFG_INIT_DCACHE_CS || !CFG_TEM_STACK_OCM) */
-
- GET_GOT /* initialize GOT access */
-
- bl cpu_init_f /* run low-level CPU init code (from Flash) */
- /* NEVER RETURNS! */
- bl board_init_f /* run first part of init code (from Flash) */
-
-
-
-/* Cache functions.
-*/
-invalidate_icache:
- iccci r0,r0 /* for 405, iccci invalidates the */
- blr /* entire I cache */
-
-invalidate_dcache:
- addi r6,0,0x0000 /* clear GPR 6 */
- /* Do loop for # of dcache congruence classes. */
- addi r7,r0, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)
- /* NOTE: dccci invalidates both */
- mtctr r7 /* ways in the D cache */
-..dcloop:
- dccci 0,r6 /* invalidate line */
- addi r6,r6, CFG_CACHELINE_SIZE /* bump to next line */
- bdnz ..dcloop
- blr
-
-flush_dcache:
- addis r9,r0,0x0002 /* set mask for EE and CE msr bits */
- ori r9,r9,0x8000
- mfmsr r12 /* save msr */
- andc r9,r12,r9
- mtmsr r9 /* disable EE and CE */
- addi r10,r0,0x0001 /* enable data cache for unused memory */
- mfdccr r9 /* region 0xF8000000-0xFFFFFFFF via */
- or r10,r10,r9 /* bit 31 in dccr */
- mtdccr r10
-
- /* do loop for # of congruence classes. */
- addi r10,r0,(CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)
- addi r11,r0,(CFG_DCACHE_SIZE / 2) /* D cache set size - 2 way sets */
- mtctr r10
- addi r10,r0,(0xE000-0x10000) /* start at 0xFFFFE000 */
- add r11,r10,r11 /* add to get to other side of cache line */
-..flush_dcache_loop:
- lwz r3,0(r10) /* least recently used side */
- lwz r3,0(r11) /* the other side */
- dccci r0,r11 /* invalidate both sides */
- addi r10,r10,CFG_CACHELINE_SIZE /* bump to next line */
- addi r11,r11,CFG_CACHELINE_SIZE /* bump to next line */
- bdnz ..flush_dcache_loop
- sync /* allow memory access to complete */
- mtdccr r9 /* restore dccr */
- mtmsr r12 /* restore msr */
- blr
-
- .globl icache_enable
-icache_enable:
- mflr r8
bl invalidate_icache
- mtlr r8
- isync
- addis r3,r0, 0x8000 /* set bit 0 */
- mticcr r3
- blr
-
- .globl icache_disable
-icache_disable:
- addis r3,r0, 0x0000 /* clear bit 0 */
- mticcr r3
- isync
- blr
-
- .globl icache_status
-icache_status:
- mficcr r3
- srwi r3, r3, 31 /* >>31 => select bit 0 */
- blr
-
- .globl dcache_enable
-dcache_enable:
- mflr r8
bl invalidate_dcache
- mtlr r8
- isync
- addis r3,r0, 0x8000 /* set bit 0 */
- mtdccr r3
- blr
-
- .globl dcache_disable
-dcache_disable:
- mflr r8
- bl flush_dcache
- mtlr r8
- addis r3,r0, 0x0000 /* clear bit 0 */
- mtdccr r3
- blr
-
- .globl dcache_status
-dcache_status:
- mfdccr r3
- srwi r3, r3, 31 /* >>31 => select bit 0 */
- blr
-
- .globl get_pvr
-get_pvr:
- mfspr r3, PVR
- blr
-#if !defined(CONFIG_440)
- .globl wr_pit
-wr_pit:
- mtspr pit, r3
- blr
-#endif
-
- .globl wr_tcr
-wr_tcr:
- mtspr tcr, r3
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: ppcDcbf */
-/* Description: Data Cache block flush */
-/* Input: r3 = effective address */
-/* Output: none. */
-/*------------------------------------------------------------------------------- */
- .globl ppcDcbf
-ppcDcbf:
- dcbf r0,r3
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: ppcDcbi */
-/* Description: Data Cache block Invalidate */
-/* Input: r3 = effective address */
-/* Output: none. */
-/*------------------------------------------------------------------------------- */
- .globl ppcDcbi
-ppcDcbi:
- dcbi r0,r3
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: ppcSync */
-/* Description: Processor Synchronize */
-/* Input: none. */
-/* Output: none. */
-/*------------------------------------------------------------------------------- */
- .globl ppcSync
-ppcSync:
- sync
- blr
-
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = dest
- * r4 = src
- * r5 = length in bytes
- * r6 = cachelinesize
- */
- .globl relocate_code
-relocate_code:
- mr r1, r3 /* Set new stack pointer */
- mr r9, r4 /* Save copy of Init Data pointer */
- mr r10, r5 /* Save copy of Destination Address */
-
- mr r3, r5 /* Destination Address */
- lis r4, CFG_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CFG_MONITOR_BASE@l
- lwz r5, GOT(__init_end)
- sub r5, r5, r4
- li r6, CFG_CACHELINE_SIZE /* Cache Line Size */
-
- /*
- * Fix GOT pointer:
+ /*
+ * Enable two 128MB cachable instruction regions
*
- * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE) + Destination Address
- *
- * Offset:
- */
- sub r15, r10, r4
-
- /* First our own GOT */
- add r14, r14, r15
- /* the the one used by the C code */
- add r30, r30, r15
-
- /*
- * Now relocate code
+ * 0x00000000 - 0x07FFFFFF
+ * 0xF8000000 - 0xFFFFFFFF
*/
- cmplw cr1,r3,r4
- addi r0,r5,3
- srwi. r0,r0,2
- beq cr1,4f /* In place copy is not necessary */
- beq 7f /* Protect against 0 count */
- mtctr r0
- bge cr1,2f
-
- la r8,-4(r4)
- la r7,-4(r3)
-1: lwzu r0,4(r8)
- stwu r0,4(r7)
- bdnz 1b
- b 4f
-
-2: slwi r0,r0,2
- add r8,r4,r0
- add r7,r3,r0
-3: lwzu r0,-4(r8)
- stwu r0,-4(r7)
- bdnz 3b
-
-/*
- * Now flush the cache: note that we must start from a cache aligned
- * address. Otherwise we might miss one cache line.
- */
-4: cmpwi r6,0
- add r5,r3,r5
- beq 7f /* Always flush prefetch queue in any case */
- subi r0,r6,1
- andc r3,r3,r0
- mr r4,r3
-5: dcbst 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 5b
- sync /* Wait for all dcbst to complete on bus */
- mr r4,r3
-6: icbi 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 6b
-7: sync /* Wait for all icbi to complete on bus */
+ lis r4,0x8000
+ addi r4,r4,0x0001
+ mticcr r4 /* instruction cache enable */
isync
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-
- addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
- mtlr r0
- blr /* NEVER RETURNS! */
-
-in_ram:
-
- /*
- * Relocation Function, r14 point to got2+0x8000
- *
- * Adjust got2 pointers, no need to check for 0, this code
- * already puts a few entries in the table.
- */
- li r0,__got2_entries@sectoff@l
- la r3,GOT(_GOT2_TABLE_)
- lwz r11,GOT(_GOT2_TABLE_)
- mtctr r0
- sub r11,r3,r11
- addi r3,r3,-4
-1: lwzu r0,4(r3)
- add r0,r0,r11
- stw r0,0(r3)
- bdnz 1b
-
- /*
- * Now adjust the fixups and the pointers to the fixups
- * in case we need to move ourselves again.
- */
-2: li r0,__fixup_entries@sectoff@l
- lwz r3,GOT(_FIXUP_TABLE_)
- cmpwi r0,0
- mtctr r0
- addi r3,r3,-4
- beq 4f
-3: lwzu r4,4(r3)
- lwzux r0,r4,r11
- add r0,r0,r11
- stw r10,0(r3)
- stw r0,0(r4)
- bdnz 3b
-4:
-clear_bss:
- /*
- * Now clear BSS segment
- */
- lwz r3,GOT(__bss_start)
- lwz r4,GOT(_end)
-
- cmplw 0, r3, r4
- beq 6f
-
- li r0, 0
-5:
- stw r0, 0(r3)
- addi r3, r3, 4
- cmplw 0, r3, r4
- bne 5b
-6:
-
- mr r3, r9 /* Init Data pointer */
- mr r4, r10 /* Destination Address */
- bl board_init_r
-
- /*
- * Copy exception vector code to low memory
- *
- * r3: dest_addr
- * r7: source address, r8: end address, r9: target address
- */
- .globl trap_init
-trap_init:
- lwz r7, GOT(_start)
- lwz r8, GOT(_end_of_vectors)
-
- li r9, 0x100 /* reset vector always at 0x100 */
-
- cmplw 0, r7, r8
- bgelr /* return if r7>=r8 - just in case */
-
- mflr r4 /* save link register */
-1:
- lwz r0, 0(r7)
- stw r0, 0(r9)
- addi r7, r7, 4
- addi r9, r9, 4
- cmplw 0, r7, r8
- bne 1b
-
- /*
- * relocate `hdlr' and `int_return' entries
- */
- li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
- li r8, Alignment - _start + EXC_OFF_SYS_RESET
-2:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 2b
-
- li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
- li r8, SystemCall - _start + EXC_OFF_SYS_RESET
-3:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 3b
-
- li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
- li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
-4:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 4b
-
- mtlr r4 /* restore link register */
- blr
-
/*
- * Function: relocate entries for one exception vector
+ * Enable dcache region containing DCACHE_RAM_BASE
+ * and set region to write-back
*/
-trap_reloc:
- lwz r0, 0(r7) /* hdlr ... */
- add r0, r0, r3 /* ... += dest_addr */
- stw r0, 0(r7)
-
- lwz r0, 4(r7) /* int_return ... */
- add r0, r0, r3 /* ... += dest_addr */
- stw r0, 4(r7)
-
- blr
-
-
-#ifdef CONFIG_405EP
-ppc405ep_init:
- /*
- !-----------------------------------------------------------------------
- ! Check FPGA for PCI internal/external arbitration
- ! If board is set to internal arbitration, update cpc0_pci
- !-----------------------------------------------------------------------
- */
- addi r3,0,CPC0_PCI_HOST_CFG_EN
-#ifdef CONFIG_BUBINGA405EP
- addis r5,r0,FPGA_REG1@h /* set offset for FPGA_REG1 */
- ori r5,r5,FPGA_REG1@l
- lbz r5,0x0(r5) /* read to get PCI arb selection */
- andi. r6,r5,FPGA_REG1_PCI_INT_ARB /* using internal arbiter ?*/
- beq ..pci_cfg_set /* if not set, then bypass reg write*/
-#endif
- ori r3,r3,CPC0_PCI_ARBIT_EN
-..pci_cfg_set:
- mtdcr CPC0_PCI, r3 /* Enable internal arbiter*/
-
- /*
- !-----------------------------------------------------------------------
- ! Check to see if chip is in bypass mode.
- ! If so, write stored CPC0_PLLMR0 and CPC0_PLLMR1 values and perform a
- ! CPU reset Otherwise, skip this step and keep going.
- ! Note: Running BIOS in bypass mode is not supported since PLB speed
- ! will not be fast enough for the SDRAM (min 66MHz)
- !-----------------------------------------------------------------------
- */
- mfdcr r5, CPC0_PLLMR1
- rlwinm r4,r5,1,0x1 /* get system clock source (SSCS) */
- cmpi cr0,0,r4,0x1
-
- beq pll_done /* if SSCS =b'1' then PLL has */
- /* already been set */
- /* and CPU has been reset */
- /* so skip to next section */
-
-#ifdef CONFIG_BUBINGA405EP
- /*
- !-----------------------------------------------------------------------
- ! Read NVRAM to get value to write in PLLMR.
- ! If value has not been correctly saved, write default value
- ! Default config values (assuming on-board 33MHz SYS_CLK) are above.
- ! See CPU_DEFAULT_200 and CPU_DEFAULT_266 above.
- !
- ! WARNING: This code assumes the first three words in the nvram_t
- ! structure in openbios.h. Changing the beginning of
- ! the structure will break this code.
- !
- !-----------------------------------------------------------------------
- */
- addis r3,0,NVRAM_BASE@h
- addi r3,r3,NVRAM_BASE@l
-
- lwz r4, 0(r3)
- addis r5,0,NVRVFY1@h
- addi r5,r5,NVRVFY1@l
- cmp cr0,0,r4,r5 /* Compare 1st NVRAM Magic number*/
- bne ..no_pllset
- addi r3,r3,4
- lwz r4, 0(r3)
- addis r5,0,NVRVFY2@h
- addi r5,r5,NVRVFY2@l
- cmp cr0,0,r4,r5 /* Compare 2 NVRAM Magic number */
- bne ..no_pllset
- addi r3,r3,8 /* Skip over conf_size */
- lwz r4, 4(r3) /* Load PLLMR1 value from NVRAM */
- lwz r3, 0(r3) /* Load PLLMR0 value from NVRAM */
- rlwinm r5,r4,1,0x1 /* get system clock source (SSCS) */
- cmpi cr0,0,r5,1 /* See if PLL is locked */
- beq pll_write
-..no_pllset:
-#endif /* CONFIG_BUBINGA405EP */
-
- addis r3,0,PLLMR0_DEFAULT@h /* PLLMR0 default value */
- ori r3,r3,PLLMR0_DEFAULT@l /* */
- addis r4,0,PLLMR1_DEFAULT@h /* PLLMR1 default value */
- ori r4,r4,PLLMR1_DEFAULT@l /* */
-
- b pll_write /* Write the CPC0_PLLMR with new value */
-
-pll_done:
- /*
- !-----------------------------------------------------------------------
- ! Clear Soft Reset Register
- ! This is needed to enable PCI if not booting from serial EPROM
- !-----------------------------------------------------------------------
- */
- addi r3, 0, 0x0
- mtdcr CPC0_SRR, r3
-
- addis r3,0,0x0010
- mtctr r3
-pci_wait:
- bdnz pci_wait
-
- blr /* return to main code */
-
-/*
-!-----------------------------------------------------------------------------
-! Function: pll_write
-! Description: Updates the value of the CPC0_PLLMR according to CMOS27E documentation
-! That is:
-! 1. Pll is first disabled (de-activated by putting in bypass mode)
-! 2. PLL is reset
-! 3. Clock dividers are set while PLL is held in reset and bypassed
-! 4. PLL Reset is cleared
-! 5. Wait 100us for PLL to lock
-! 6. A core reset is performed
-! Input: r3 = Value to write to CPC0_PLLMR0
-! Input: r4 = Value to write to CPC0_PLLMR1
-! Output r3 = none
-!-----------------------------------------------------------------------------
-*/
-pll_write:
- mfdcr r5, CPC0_UCR
- andis. r5,r5,0xFFFF
- ori r5,r5,0x0101 /* Stop the UART clocks */
- mtdcr CPC0_UCR,r5 /* Before changing PLL */
-
- mfdcr r5, CPC0_PLLMR1
- rlwinm r5,r5,0,0x7FFFFFFF /* Disable PLL */
- mtdcr CPC0_PLLMR1,r5
- oris r5,r5,0x4000 /* Set PLL Reset */
- mtdcr CPC0_PLLMR1,r5
- mtdcr CPC0_PLLMR0,r3 /* Set clock dividers */
- rlwinm r5,r4,0,0x3FFFFFFF /* Reset & Bypass new PLL dividers */
- oris r5,r5,0x4000 /* Set PLL Reset */
- mtdcr CPC0_PLLMR1,r5 /* Set clock dividers */
- rlwinm r5,r5,0,0xBFFFFFFF /* Clear PLL Reset */
- mtdcr CPC0_PLLMR1,r5
-
- /*
- ! Wait min of 100us for PLL to lock.
- ! See CMOS 27E databook for more info.
- ! At 200MHz, that means waiting 20,000 instructions
- */
- addi r3,0,20000 /* 2000 = 0x4e20 */
- mtctr r3
-pll_wait:
- bdnz pll_wait
+ lis r4, DCACHE_RAM_BASE@ha
+ addi r4, r4, DCACHE_RAM_BASE@l
+ srwi r4, r4, 27
+ li r0, 1
+ slw r4, r0, r4
+ nor r0, r4, r4
+ mtdcr dcwr, r0 /* data cache write-back */
+ mtdccr r4 /* data cache enable */
+ sync
- oris r5,r5,0x8000 /* Enable PLL */
- mtdcr CPC0_PLLMR1,r5 /* Engage */
+ /* DMA Status, clear to come up clean */
- /*
- * Reset CPU to guarantee timings are OK
- * Not sure if this is needed...
- */
- addis r3,0,0x1000
- mtspr dbcr0,r3 /* This will cause a CPU core reset, and */
- /* execution will continue from the poweron */
- /* vector of 0xfffffffc */
-#endif /* CONFIG_405EP */
-#endif
+ addis r3,r0, 0xFFFF /* Clear all existing DMA status */
+ ori r3,r3, 0xFFFF
+ mtdcr dmasr, r3