diff options
Diffstat (limited to 'src/cpu/intel/haswell/haswell_init.c')
-rw-r--r-- | src/cpu/intel/haswell/haswell_init.c | 53 |
1 files changed, 53 insertions, 0 deletions
diff --git a/src/cpu/intel/haswell/haswell_init.c b/src/cpu/intel/haswell/haswell_init.c index fb78df419a..adc99cfd48 100644 --- a/src/cpu/intel/haswell/haswell_init.c +++ b/src/cpu/intel/haswell/haswell_init.c @@ -293,6 +293,57 @@ static u32 pcode_mailbox_read(u32 command) return MCHBAR32(BIOS_MAILBOX_DATA); } +static void initialize_vr_config(void) +{ + msr_t msr; + + printk(BIOS_DEBUG, "Initializing VR config.\n"); + + /* Configure VR_CURRENT_CONFIG. */ + msr = rdmsr(MSR_VR_CURRENT_CONFIG); + /* Preserve bits 63 and 62. Bit 62 is PSI4 enable, but it is only valid + * on ULT systems. */ + msr.hi &= 0xc0000000; + msr.hi |= (0x01 << (52 - 32)); /* PSI3 threshold - 1A. */ + msr.hi |= (0x05 << (42 - 32)); /* PSI2 threshold - 5A. */ + msr.hi |= (0x0f << (32 - 32)); /* PSI1 threshold - 15A. */ + + if (is_ult()) + msr.hi |= (1 << (62 - 32)); /* Enable PSI4 */ + /* Leave the max instantaneous current limit (12:0) to default. */ + wrmsr(MSR_VR_CURRENT_CONFIG, msr); + + /* Configure VR_MISC_CONFIG MSR. */ + msr = rdmsr(MSR_VR_MISC_CONFIG); + /* Set the IOUT_SLOPE scalar applied to dIout in U10.1.9 format. */ + msr.hi &= ~(0x3ff << (40 - 32)); + msr.hi |= (0x200 << (40 - 32)); /* 1.0 */ + /* Set IOUT_OFFSET to 0. */ + msr.hi &= ~0xff; + /* Set exit ramp rate to fast. */ + msr.hi |= (1 << (50 - 32)); + /* Set entry ramp rate to slow. */ + msr.hi &= ~(1 << (51 - 32)); + /* Enable decay mode on C-state entry. */ + msr.hi |= (1 << (52 - 32)); + /* Set the slow ramp rate to be fast ramp rate / 4 */ + msr.hi &= ~(0x3 << (53 - 32)); + msr.hi |= (0x01 << (53 - 32)); + /* Set MIN_VID (31:24) to allow CPU to have full control. */ + msr.lo &= ~0xff000000; + wrmsr(MSR_VR_MISC_CONFIG, msr); + + /* Configure VR_MISC_CONFIG2 MSR. */ + if (is_ult()) { + msr = rdmsr(MSR_VR_MISC_CONFIG2); + msr.lo &= ~0xffff; + /* Allow CPU to control minimum voltage completely (15:8) and + * set the fast ramp voltage to 1110mV (0x6f in 10mV steps). */ + msr.lo |= 0x006f; + wrmsr(MSR_VR_MISC_CONFIG2, msr); + } +} + static void configure_pch_power_sharing(void) { u32 pch_power, pch_power_ext, pmsync, pmsync2; @@ -645,6 +696,8 @@ static void bsp_init_before_ap_bringup(struct bus *cpu_bus) x86_setup_var_mtrrs(cpuid_eax(0x80000008) & 0xff, 2); x86_mtrr_check(); + initialize_vr_config(); + if (is_ult()) { calibrate_24mhz_bclk(); configure_pch_power_sharing(); |