diff options
Diffstat (limited to 'src/cpu/intel/car')
| -rw-r--r-- | src/cpu/intel/car/cache_as_ram.inc | 145 |
1 files changed, 80 insertions, 65 deletions
diff --git a/src/cpu/intel/car/cache_as_ram.inc b/src/cpu/intel/car/cache_as_ram.inc index 0cf5a2e669..ea455bfce3 100644 --- a/src/cpu/intel/car/cache_as_ram.inc +++ b/src/cpu/intel/car/cache_as_ram.inc @@ -21,18 +21,18 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#define CacheSize CONFIG_DCACHE_RAM_SIZE -#define CacheBase (0xd0000 - CacheSize) - #include <cpu/x86/stack.h> #include <cpu/x86/mtrr.h> #include <cpu/x86/lapic_def.h> - /* Save the BIST result */ +#define CacheSize CONFIG_DCACHE_RAM_SIZE +#define CacheBase (0xd0000 - CacheSize) + + /* Save the BIST result. */ movl %eax, %ebp CacheAsRam: - // Check whether the processor has HT capability + /* Check whether the processor has HT capability. */ movl $01, %eax cpuid btl $28, %edx @@ -41,20 +41,26 @@ CacheAsRam: cmpb $01, %bh jbe NotHtProcessor - // It is a HT processor; Send SIPI to the other logical processor - // within this processor so that the CAR related common system - // registers are programmed accordingly. + /* + * It is a HT processor. Send SIPI to the other logical processor + * within this processor so that the CAR related common system + * registers are programmed accordingly. + */ - // Use some register that is common to both logical processors - // as semaphore. Refer Appendix B, Vol.3 + /* + * Use some register that is common to both logical processors + * as semaphore. Refer Appendix B, Vol.3. + */ xorl %eax, %eax xorl %edx, %edx movl $MTRRfix64K_00000_MSR, %ecx wrmsr - // Figure out the logical AP's APIC ID; the following logic will - // work only for processors with 2 threads. - // Refer to Vol 3. Table 7-1 for details about this logic + /* + * Figure out the logical AP's APIC ID; the following logic will + * work only for processors with 2 threads. + * Refer to Vol 3. Table 7-1 for details about this logic. + */ movl $0xFEE00020, %esi movl (%esi), %ebx andl $0xFF000000, %ebx @@ -66,17 +72,19 @@ CacheAsRam: LogicalAP0: orb $0x01, %bl Send_SIPI: - bswapl %ebx // ebx - logical AP's APIC ID + bswapl %ebx /* EBX - logical AP's APIC ID. */ - // Fill up the IPI command registers in the Local APIC mapped to - // default address and issue SIPI to the other logical processor - // within this processor die. + /* + * Fill up the IPI command registers in the Local APIC mapped to + * default address and issue SIPI to the other logical processor + * within this processor die. + */ Retry_SIPI: movl %ebx, %eax movl $0xFEE00310, %esi movl %eax, (%esi) - // SIPI vector - F900:0000 + /* SIPI vector - F900:0000 */ movl $0x000006F9, %eax movl $0xFEE00300, %esi movl %eax, (%esi) @@ -91,7 +99,7 @@ SIPI_Delay: andl $0x00001000, %eax jnz Retry_SIPI - // Wait for the Logical AP to complete initialization + /* Wait for the Logical AP to complete initialization. */ LogicalAP_SIPINotdone: movl $MTRRfix64K_00000_MSR, %ecx rdmsr @@ -99,14 +107,13 @@ LogicalAP_SIPINotdone: jz LogicalAP_SIPINotdone NotHtProcessor: - /* Set the default memory type and enable fixed and variable MTRRs */ + /* Set the default memory type and enable fixed and variable MTRRs. */ movl $MTRRdefType_MSR, %ecx xorl %edx, %edx - /* Enable Variable and Fixed MTRRs */ - movl $0x00000c00, %eax + movl $0x00000c00, %eax /* Enable variable and fixed MTRRs. */ wrmsr - /* Clear all MTRRs */ + /* Clear all MTRRs. */ xorl %edx, %edx movl $fixed_mtrr_msr, %esi @@ -126,6 +133,7 @@ fixed_mtrr_msr: .long 0x268, 0x269, 0x26A .long 0x26B, 0x26C, 0x26D .long 0x26E, 0x26F + var_mtrr_msr: .long 0x200, 0x201, 0x202, 0x203 .long 0x204, 0x205, 0x206, 0x207 @@ -135,14 +143,16 @@ var_mtrr_msr: clear_fixed_var_mtrr_out: -/* 0x06 is the WB IO type for a given 4k segment. +/* + * 0x06 is the WB IO type for a given 4k segment. * segs is the number of 4k segments in the area of the particular * register we want to use for CAR. * reg is the register where the IO type should be stored. */ .macro extractmask segs, reg .if \segs <= 0 - /* The xorl here is superfluous because at the point of first execution + /* + * The xorl here is superfluous because at the point of first execution * of this macro, %eax and %edx are cleared. Later invocations of this * macro will have a monotonically increasing segs parameter. */ @@ -158,19 +168,21 @@ clear_fixed_var_mtrr_out: .endif .endm -/* size is the cache size in bytes we want to use for CAR. - * windowoffset is the 32k-aligned window into CAR size +/* + * size is the cache size in bytes we want to use for CAR. + * windowoffset is the 32k-aligned window into CAR size. */ .macro simplemask carsize, windowoffset .set gas_bug_workaround,(((\carsize - \windowoffset) / 0x1000) - 4) extractmask gas_bug_workaround, %eax .set gas_bug_workaround,(((\carsize - \windowoffset) / 0x1000)) extractmask gas_bug_workaround, %edx -/* Without the gas bug workaround, the entire macro would consist only of the - * two lines below. - extractmask (((\carsize - \windowoffset) / 0x1000) - 4), %eax - extractmask (((\carsize - \windowoffset) / 0x1000)), %edx - */ + /* + * Without the gas bug workaround, the entire macro would consist + * only of the two lines below: + * extractmask (((\carsize - \windowoffset) / 0x1000) - 4), %eax + * extractmask (((\carsize - \windowoffset) / 0x1000)), %edx + */ .endm #if CacheSize > 0x10000 @@ -184,13 +196,13 @@ clear_fixed_var_mtrr_out: #endif #if CacheSize > 0x8000 - /* enable caching for 32K-64K using fixed mtrr */ + /* Enable caching for 32K-64K using fixed MTRR. */ movl $MTRRfix4K_C0000_MSR, %ecx simplemask CacheSize, 0x8000 wrmsr #endif - /* enable caching for 0-32K using fixed mtrr */ + /* Enable caching for 0-32K using fixed MTRR. */ movl $MTRRfix4K_C8000_MSR, %ecx simplemask CacheSize, 0 wrmsr @@ -203,8 +215,9 @@ clear_fixed_var_mtrr_out: #define REAL_XIP_ROM_BASE CONFIG_XIP_ROM_BASE #endif - /* enable write base caching so we can do execute in place - * on the flash rom. + /* + * Enable write base caching so we can do execute in place (XIP) + * on the flash ROM. */ movl $MTRRphysBase_MSR(1), %ecx xorl %edx, %edx @@ -218,27 +231,27 @@ clear_fixed_var_mtrr_out: wrmsr #endif /* CONFIG_XIP_ROM_SIZE && CONFIG_XIP_ROM_BASE */ - /* enable cache */ + /* Enable cache. */ movl %cr0, %eax andl $0x9fffffff, %eax movl %eax, %cr0 - /* Read the range with lodsl*/ + /* Read the range with lodsl. */ movl $CacheBase, %esi cld movl $(CacheSize >> 2), %ecx rep lodsl - /* Clear the range */ + /* Clear the range. */ movl $CacheBase, %edi movl $(CacheSize >> 2), %ecx xorl %eax, %eax rep stosl #if 0 - /* check the cache as ram */ + /* Check the cache as ram. */ movl $CacheBase, %esi - movl $(CacheSize>>2), %ecx + movl $(CacheSize >> 2), %ecx .xin1: movl %esi, %eax movl %eax, (%esi) @@ -249,29 +262,30 @@ clear_fixed_var_mtrr_out: .xout1: movl $CacheBase, %esi -// movl $(CacheSize>>2), %ecx - movl $4, %ecx + // movl $(CacheSize >> 2), %ecx + movl $4, %ecx .xin1x: movl %esi, %eax movl $0x4000, %edx movb %ah, %al .testx1: - outb %al, $0x80 + outb %al, $0x80 decl %edx - jnz .testx1 + jnz .testx1 movl (%esi), %eax - cmpb 0xff, %al - je .xin2 /* dont show */ + cmpb 0xff, %al + je .xin2 /* Don't show. */ movl $0x4000, %edx .testx2: - outb %al, $0x80 + outb %al, $0x80 decl %edx - jnz .testx2 + jnz .testx2 -.xin2: decl %ecx +.xin2: + decl %ecx je .xout1x add $4, %esi jmp .xin1x @@ -281,21 +295,22 @@ clear_fixed_var_mtrr_out: movl $(CacheBase + CacheSize - 4), %eax movl %eax, %esp lout: - /* Restore the BIST result */ + /* Restore the BIST result. */ movl %ebp, %eax - /* We need to set ebp ? No need */ + /* We need to set EBP? No need. */ movl %esp, %ebp - pushl %eax /* bist */ + pushl %eax /* BIST */ call main - /* We don't need cache as ram for now on */ - /* disable cache */ + /* We don't need CAR for now on. */ + + /* Disable cache. */ movl %cr0, %eax - orl $(0x1<<30),%eax + orl $(1 << 30), %eax movl %eax, %cr0 - /* clear sth */ + /* Clear sth. */ movl $MTRRfix4K_C8000_MSR, %ecx xorl %edx, %edx xorl %eax, %eax @@ -306,25 +321,25 @@ lout: wrmsr #endif - /* Set the default memory type and disable fixed - * and enable variable MTRRs + /* + * Set the default memory type and disable fixed + * and enable variable MTRRs. */ movl $MTRRdefType_MSR, %ecx xorl %edx, %edx - /* Enable Variable and Disable Fixed MTRRs */ - movl $0x00000800, %eax + movl $0x00000800, %eax /* Enable variable and disable fixed MTRRs. */ wrmsr - /* enable cache */ + /* Enable cache. */ movl %cr0, %eax - andl $0x9fffffff,%eax + andl $0x9fffffff, %eax movl %eax, %cr0 - /* clear boot_complete flag */ + /* Clear boot_complete flag. */ xorl %ebp, %ebp __main: post_code(0x11) - cld /* clear direction flag */ + cld /* Clear direction flag. */ movl %ebp, %esi |