diff options
Diffstat (limited to 'src/console')
| -rw-r--r-- | src/console/Kconfig | 31 | ||||
| -rw-r--r-- | src/console/console.c | 4 |
2 files changed, 35 insertions, 0 deletions
diff --git a/src/console/Kconfig b/src/console/Kconfig index caf91ab252..c0e4a8c8b0 100644 --- a/src/console/Kconfig +++ b/src/console/Kconfig @@ -233,6 +233,37 @@ config CONSOLE_CBMEM_DUMP_TO_UART endif +config CONSOLE_SPI_FLASH + bool "SPI Flash console output" + default n + select BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY if !COMMON_CBFS_SPI_WRAPPER + help + Send coreboot debug output to the SPI Flash in the FMAP CONSOLE area + + This option can cause premature wear on the SPI flash and should not + be used as a normal means of debugging. It is only to be enabled and + used when porting a new motherboard which has no other console + available (no UART, no POST, no cbmem access(non bootable)). Since + a non bootable machine will require the use of an external SPI Flash + programmer, the developer can grab the console log at the same time. + + The flash console will not be erased on reboot, so once it is full, + the flashconsole driver will stop writing to it. This is to avoid + wear on the flash, and to avoid erasing sectors (which may freeze + the SPI controller on skylake). + + The 'CONSOLE' area can be extracted from the FMAP with : + cbfstool rom.bin read -r CONSOLE -f console.log + +config CONSOLE_SPI_FLASH_BUFFER_SIZE + hex "Room allocated for console output in FMAP" + default 0x20000 + depends on CONSOLE_SPI_FLASH + help + Space allocated for console output storage in FMAP. The default + value (128K or 0x20000 bytes) is large enough to accommodate + even the BIOS_SPEW level. + config CONSOLE_QEMU_DEBUGCON bool "QEMU debug console output" depends on BOARD_EMULATION_QEMU_X86 diff --git a/src/console/console.c b/src/console/console.c index 7b0dfc2fb1..877c8dc960 100644 --- a/src/console/console.c +++ b/src/console/console.c @@ -21,6 +21,7 @@ #include <console/uart.h> #include <console/usb.h> #include <console/spi.h> +#include <console/flash.h> #include <rules.h> void console_hw_init(void) @@ -33,6 +34,7 @@ void console_hw_init(void) __ne2k_init(); __usbdebug_init(); __spiconsole_init(); + __flashconsole_init(); } void console_tx_byte(unsigned char byte) @@ -53,6 +55,7 @@ void console_tx_byte(unsigned char byte) __ne2k_tx_byte(byte); __usb_tx_byte(byte); __spiconsole_tx_byte(byte); + __flashconsole_tx_byte(byte); } void console_tx_flush(void) @@ -60,6 +63,7 @@ void console_tx_flush(void) __uart_tx_flush(); __ne2k_tx_flush(); __usb_tx_flush(); + __flashconsole_tx_flush(); } void console_write_line(uint8_t *buffer, size_t number_of_bytes) |