diff options
Diffstat (limited to 'src/arch/i386/lib')
| -rw-r--r-- | src/arch/i386/lib/Makefile.inc | 1 | ||||
| -rw-r--r-- | src/arch/i386/lib/ioapic.c | 135 |
2 files changed, 136 insertions, 0 deletions
diff --git a/src/arch/i386/lib/Makefile.inc b/src/arch/i386/lib/Makefile.inc index 41f8fdc581..de61f9e42c 100644 --- a/src/arch/i386/lib/Makefile.inc +++ b/src/arch/i386/lib/Makefile.inc @@ -5,6 +5,7 @@ obj-y += pci_ops_conf2.o obj-y += pci_ops_mmconf.o obj-y += pci_ops_auto.o obj-y += exception.o +obj-$(CONFIG_IOAPIC) += ioapic.o initobj-y += printk_init.o initobj-y += cbfs_and_run.o diff --git a/src/arch/i386/lib/ioapic.c b/src/arch/i386/lib/ioapic.c new file mode 100644 index 0000000000..efc2ac52fc --- /dev/null +++ b/src/arch/i386/lib/ioapic.c @@ -0,0 +1,135 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <arch/ioapic.h> +#include <console/console.h> +#include <cpu/x86/lapic.h> + +static u32 io_apic_read(u32 ioapic_base, u32 reg) +{ + write32(ioapic_base, reg); + return read32(ioapic_base + 0x10); +} + +static void io_apic_write(u32 ioapic_base, u32 reg, u32 value) +{ + write32(ioapic_base, reg); + write32(ioapic_base + 0x10, value); +} + + +void clear_ioapic(u32 ioapic_base) +{ + u32 low, high; + u32 i, ioapic_interrupts; + + printk(BIOS_DEBUG, "IOAPIC: Clearing IOAPIC at 0x%08x\n", ioapic_base); + + /* Read the available number of interrupts */ + ioapic_interrupts = (io_apic_read(ioapic_base, 1) >> 16) & 0xff; + if (!ioapic_interrupts || ioapic_interrupts == 0xff) + ioapic_interrupts = 24; + printk(BIOS_DEBUG, "IOAPIC: %d interrupts\n", ioapic_interrupts); + + low = DISABLED; + high = NONE; + + for (i = 0; i < ioapic_interrupts; i++) { + io_apic_write(ioapic_base, i * 2 + 0x10, low); + io_apic_write(ioapic_base, i * 2 + 0x11, high); + + printk(BIOS_SPEW, "IOAPIC: reg 0x%08x value 0x%08x 0x%08x\n", i, high, low); + } + + if (io_apic_read(ioapic_base, 0x10) == 0xffffffff) { + printk(BIOS_WARNING, "IO APIC not responding.\n"); + return; + } +} + +void setup_ioapic(u32 ioapic_base, u8 ioapic_id) +{ + u32 bsp_lapicid = lapicid(); + u32 low, high; + u32 i, ioapic_interrupts; + + printk(BIOS_DEBUG, "IOAPIC: Initializing IOAPIC at 0x%08x\n", ioapic_base); + printk(BIOS_DEBUG, "IOAPIC: Bootstrap Processor Local APIC = %02x\n", + bsp_lapicid); + + if (ioapic_id) { + printk(BIOS_DEBUG, "IOAPIC: ID = 0x%02x\n", ioapic_id); + /* Set IOAPIC ID if it has been specified */ + io_apic_write(ioapic_base, 0x00, + (io_apic_read(ioapic_base, 0x00) & 0xfff0ffff) | + (ioapic_id << 24)); + } + + /* Read the available number of interrupts */ + ioapic_interrupts = (io_apic_read(ioapic_base, 1) >> 16) & 0xff; + if (!ioapic_interrupts || ioapic_interrupts == 0xff) + ioapic_interrupts = 24; + printk(BIOS_DEBUG, "IOAPIC: %d interrupts\n", ioapic_interrupts); + + +// XXX this decision should probably be made elsewhere, and +// it's the C3, not the EPIA this depends on. +#if defined(CONFIG_EPIA_VT8237R_INIT) && CONFIG_EPIA_VT8237R_INIT +#define IOAPIC_INTERRUPTS_ON_APIC_SERIAL_BUS +#else +#define IOAPIC_INTERRUPTS_ON_FSB +#endif + +#ifdef IOAPIC_INTERRUPTS_ON_FSB + /* For the Pentium 4 and above APICs deliver their interrupts + * on the front side bus, enable that. + */ + printk(BIOS_DEBUG, "IOAPIC: Enabling interrupts on FSB\n"); + io_apic_write(ioapic_base, 0x03, io_apic_read(ioapic_base, 0x03) | (1 << 0)); +#endif +#ifdef IOAPIC_INTERRUPTS_ON_APIC_SERIAL_BUS + printk(BIOS_DEBUG, "IOAPIC: Enabling interrupts on APIC serial bus\n"); + io_apic_write(ioapic_base, 0x03, 0); +#endif + + /* Enable Virtual Wire Mode */ + low = ENABLED | TRIGGER_EDGE | POLARITY_HIGH | PHYSICAL_DEST | ExtINT; + high = bsp_lapicid << (56 - 32); + + io_apic_write(ioapic_base, 0x10, low); + io_apic_write(ioapic_base, 0x11, high); + + if (io_apic_read(ioapic_base, 0x10) == 0xffffffff) { + printk(BIOS_WARNING, "IO APIC not responding.\n"); + return; + } + + printk(BIOS_SPEW, "IOAPIC: reg 0x%08x value 0x%08x 0x%08x\n", 0, high, low); + + low = DISABLED; + high = NONE; + + for (i = 1; i < ioapic_interrupts; i++) { + io_apic_write(ioapic_base, i * 2 + 0x10, low); + io_apic_write(ioapic_base, i * 2 + 0x11, high); + + printk(BIOS_SPEW, "IOAPIC: reg 0x%08x value 0x%08x 0x%08x\n", i, high, low); + } +} |