diff options
Diffstat (limited to 'src/Kconfig')
| -rw-r--r-- | src/Kconfig | 192 |
1 files changed, 94 insertions, 98 deletions
diff --git a/src/Kconfig b/src/Kconfig index c153faac7b..e18a1dd549 100644 --- a/src/Kconfig +++ b/src/Kconfig @@ -126,10 +126,6 @@ config STATIC_OPTION_TABLE every boot. Use this if you want the NVRAM configuration to never be modified from its default values. -config UNCOMPRESSED_RAMSTAGE - bool - default n - config COMPRESS_RAMSTAGE bool "Compress ramstage with LZMA" # Default value set at the end of the file @@ -181,22 +177,6 @@ config INCLUDE_CONFIG_FILE config 0x8d740 raw 3324 (empty) 0x8e480 null 3610440 -config NO_XIP_EARLY_STAGES - bool - default n if ARCH_X86 - default y - help - Identify if early stages are eXecute-In-Place(XIP). - -config EARLY_CBMEM_INIT - def_bool !LATE_CBMEM_INIT - -config EARLY_CBMEM_LIST - bool - default n - help - Enable display of CBMEM during romstage and postcar. - config COLLECT_TIMESTAMPS bool "Create a table of timestamps collected during boot" default n @@ -221,14 +201,6 @@ config COVERAGE coverage information in CBMEM for extraction from user space. If unsure, say N. -config RELOCATABLE_MODULES - bool - default n - help - If RELOCATABLE_MODULES is selected then support is enabled for - building relocatable modules in the RAM stage. Those modules can be - loaded anywhere and all the relocations are handled automatically. - config RELOCATABLE_RAMSTAGE depends on EARLY_CBMEM_INIT bool "Build the ramstage to be relocatable in 32-bit address space." @@ -249,13 +221,6 @@ config CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM The relocated ramstage is saved in an area specified by the by the board and/or chipset. -config NO_STAGE_CACHE - bool - default n - help - Do not save any component in stage cache for resume path. On resume, - all components would be read back from CBFS again. - # TODO: This doesn't belong here, move to src/arch/x86/Kconfig choice prompt "Bootblock behaviour" @@ -269,23 +234,11 @@ config BOOTBLOCK_NORMAL endchoice -# To be selected by arch, SoC or mainboard if it does not want use the normal -# src/lib/bootblock.c#main() C entry point. -config BOOTBLOCK_CUSTOM - bool - default n - config BOOTBLOCK_SOURCE string default "bootblock_simple.c" if BOOTBLOCK_SIMPLE default "bootblock_normal.c" if BOOTBLOCK_NORMAL -# To be selected by arch or platform if a C environment is available during the -# bootblock. Normally this signifies availability of RW memory (e.g. SRAM). -config C_ENVIRONMENT_BOOTBLOCK - bool - default n - config SKIP_MAX_REBOOT_CNT_CLEAR bool "Do not clear reboot count after successful boot" default n @@ -307,56 +260,6 @@ config UPDATE_IMAGE If unsure, select 'N' -config GENERIC_GPIO_LIB - bool - default n - help - If enabled, compile the generic GPIO library. A "generic" GPIO - implies configurability usually found on SoCs, particularly the - ability to control internal pull resistors. - -config GENERIC_SPD_BIN - bool - default n - help - If enabled, add support for adding spd.hex files in cbfs as spd.bin - and locating it runtime to load SPD. Additionally provide provision to - fetch SPD over SMBus. - -config DIMM_MAX - int - default 4 - depends on GENERIC_SPD_BIN - help - Total number of memory DIMM slots available on motherboard. - It is multiplication of number of channel to number of DIMMs per - channel - -config DIMM_SPD_SIZE - int - default 256 - depends on GENERIC_SPD_BIN - help - Total SPD size that will be used for DIMM. - Ex: DDR3 256, DDR4 512. - -config BOARD_ID_AUTO - bool - default n - help - Mainboards that can read a board ID from the hardware straps - (ie. GPIO) select this configuration option. - -config BOARD_ID_MANUAL - bool - default n - depends on !BOARD_ID_AUTO - help - If you want to maintain a board ID, but the hardware does not - have straps to automatically determine the ID, you can say Y - here and add a file named 'board_id' to CBFS. If you don't know - what this is about, say N. - config BOARD_ID_STRING string "Board ID" # Default value set at the end of the file @@ -1166,7 +1069,10 @@ config DEBUG_ADA_CODE endmenu -# These probably belong somewhere else, but they are needed somewhere. + +############################################################################### +# Set variables with no prompt - these can be set anywhere, and putting at +# the end of this file gives the most flexibility. config ENABLE_APIC_EXT_ID bool default n @@ -1272,6 +1178,96 @@ config RAMSTAGE_LIBHWBASE config HWBASE_DYNAMIC_MMIO def_bool y +config UNCOMPRESSED_RAMSTAGE + bool + +config NO_XIP_EARLY_STAGES + bool + default n if ARCH_X86 + default y + help + Identify if early stages are eXecute-In-Place(XIP). + +config EARLY_CBMEM_INIT + def_bool !LATE_CBMEM_INIT + +config EARLY_CBMEM_LIST + bool + default n + help + Enable display of CBMEM during romstage and postcar. + +config RELOCATABLE_MODULES + bool + help + If RELOCATABLE_MODULES is selected then support is enabled for + building relocatable modules in the RAM stage. Those modules can be + loaded anywhere and all the relocations are handled automatically. + +config NO_STAGE_CACHE + bool + help + Do not save any component in stage cache for resume path. On resume, + all components would be read back from CBFS again. + +config GENERIC_GPIO_LIB + bool + help + If enabled, compile the generic GPIO library. A "generic" GPIO + implies configurability usually found on SoCs, particularly the + ability to control internal pull resistors. + +config GENERIC_SPD_BIN + bool + help + If enabled, add support for adding spd.hex files in cbfs as spd.bin + and locating it runtime to load SPD. Additionally provide provision to + fetch SPD over SMBus. + +config DIMM_MAX + int + default 4 + depends on GENERIC_SPD_BIN + help + Total number of memory DIMM slots available on motherboard. + It is multiplication of number of channel to number of DIMMs per + channel + +config DIMM_SPD_SIZE + int + default 256 + depends on GENERIC_SPD_BIN + help + Total SPD size that will be used for DIMM. + Ex: DDR3 256, DDR4 512. + +config BOARD_ID_AUTO + bool + default n + help + Mainboards that can read a board ID from the hardware straps + (ie. GPIO) select this configuration option. + +config BOARD_ID_MANUAL + bool + default n + depends on !BOARD_ID_AUTO + help + If you want to maintain a board ID, but the hardware does not + have straps to automatically determine the ID, you can say Y + here and add a file named 'board_id' to CBFS. If you don't know + what this is about, say N. + +config BOOTBLOCK_CUSTOM + # To be selected by arch, SoC or mainboard if it does not want use the normal + # src/lib/bootblock.c#main() C entry point. + bool + +config C_ENVIRONMENT_BOOTBLOCK + # To be selected by arch or platform if a C environment is available during the + # bootblock. Normally this signifies availability of RW memory (e.g. SRAM). + bool + ############################################################################### # Set default values for symbols created before mainboards. This allows the # option to be displayed in the general menu, but the default to be loaded in |