diff options
Diffstat (limited to 'payloads')
| -rw-r--r-- | payloads/libpayload/Config.in | 6 | ||||
| -rw-r--r-- | payloads/libpayload/configs/config.arm64-generic | 1 | ||||
| -rw-r--r-- | payloads/libpayload/configs/defconfig | 1 | ||||
| -rw-r--r-- | payloads/libpayload/configs/defconfig-arm | 1 | ||||
| -rw-r--r-- | payloads/libpayload/drivers/Makefile.inc | 2 | ||||
| -rw-r--r-- | payloads/libpayload/drivers/usb/dwc2.c | 356 | ||||
| -rw-r--r-- | payloads/libpayload/drivers/usb/dwc2.h | 27 | ||||
| -rw-r--r-- | payloads/libpayload/drivers/usb/dwc2_private.h | 643 | ||||
| -rw-r--r-- | payloads/libpayload/drivers/usb/dwc2_rh.c | 188 | ||||
| -rw-r--r-- | payloads/libpayload/drivers/usb/usbinit.c | 5 | ||||
| -rw-r--r-- | payloads/libpayload/include/usb/usb.h | 2 |
11 files changed, 1231 insertions, 1 deletions
diff --git a/payloads/libpayload/Config.in b/payloads/libpayload/Config.in index 2efd5d673c..b1b903b010 100644 --- a/payloads/libpayload/Config.in +++ b/payloads/libpayload/Config.in @@ -470,6 +470,12 @@ config USB_XHCI Select this option if you want to use USB 3.0 NOTE: This option is not (fully) implemented yet +config USB_DWC2 + bool "Support for USB DesignWare HCD controllers" + depends on USB && !USB_HID + help + Select this option if you want to use DesignWare USB 2.0 host controller + config USB_HID bool "Support for USB keyboards" depends on USB diff --git a/payloads/libpayload/configs/config.arm64-generic b/payloads/libpayload/configs/config.arm64-generic index d44237ef5a..986ebe1dc5 100644 --- a/payloads/libpayload/configs/config.arm64-generic +++ b/payloads/libpayload/configs/config.arm64-generic @@ -60,6 +60,7 @@ CONFIG_LP_USB_HID=y CONFIG_LP_USB_HUB=y CONFIG_LP_USB_MSC=y CONFIG_LP_USB_GEN_HUB=y +# CONFIG_LP_USB_DWC2 is not set # CONFIG_LP_USB_PCI is not set # CONFIG_LP_BIG_ENDIAN is not set CONFIG_LP_LITTLE_ENDIAN=y diff --git a/payloads/libpayload/configs/defconfig b/payloads/libpayload/configs/defconfig index 556b6198b7..a518da5c03 100644 --- a/payloads/libpayload/configs/defconfig +++ b/payloads/libpayload/configs/defconfig @@ -78,6 +78,7 @@ CONFIG_LP_USB_HID=y CONFIG_LP_USB_HUB=y CONFIG_LP_USB_MSC=y CONFIG_LP_USB_GEN_HUB=y +# CONFIG_LP_USB_DWC2 is not set CONFIG_LP_USB_PCI=y # CONFIG_LP_BIG_ENDIAN is not set CONFIG_LP_LITTLE_ENDIAN=y diff --git a/payloads/libpayload/configs/defconfig-arm b/payloads/libpayload/configs/defconfig-arm index ff2225f3dc..750c0bd060 100644 --- a/payloads/libpayload/configs/defconfig-arm +++ b/payloads/libpayload/configs/defconfig-arm @@ -71,6 +71,7 @@ CONFIG_LP_USB_HID=y CONFIG_LP_USB_HUB=y CONFIG_LP_USB_MSC=y CONFIG_LP_USB_GEN_HUB=y +# CONFIG_LP_USB_DWC2 is not set # CONFIG_LP_USB_PCI is not set # CONFIG_LP_BIG_ENDIAN is not set CONFIG_LP_LITTLE_ENDIAN=y diff --git a/payloads/libpayload/drivers/Makefile.inc b/payloads/libpayload/drivers/Makefile.inc index f3b147de36..4aa71d3f8b 100644 --- a/payloads/libpayload/drivers/Makefile.inc +++ b/payloads/libpayload/drivers/Makefile.inc @@ -100,6 +100,8 @@ libc-$(CONFIG_LP_USB_XHCI) += usb/xhci_commands.c libc-$(CONFIG_LP_USB_XHCI) += usb/xhci_rh.c libc-$(CONFIG_LP_USB_HID) += usb/usbhid.c libc-$(CONFIG_LP_USB_MSC) += usb/usbmsc.c +libc-$(CONFIG_LP_USB_DWC2) += usb/dwc2.c +libc-$(CONFIG_LP_USB_DWC2) += usb/dwc2_rh.c # used by both USB HID and keyboard libc-y += hid.c diff --git a/payloads/libpayload/drivers/usb/dwc2.c b/payloads/libpayload/drivers/usb/dwc2.c new file mode 100644 index 0000000000..1092cb4ee3 --- /dev/null +++ b/payloads/libpayload/drivers/usb/dwc2.c @@ -0,0 +1,356 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Rockchip Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <libpayload.h> +#include <arch/cache.h> + +#include "dwc2.h" +#include "dwc2_private.h" + +static void dummy(hci_t *controller) +{ +} + +static void dwc2_reinit(hci_t *controller) +{ + dwc2_reg_t *reg = DWC2_REG(controller); + gusbcfg_t gusbcfg = { .d32 = 0 }; + grstctl_t grstctl = { .d32 = 0 }; + gintsts_t gintsts = { .d32 = 0 }; + gahbcfg_t gahbcfg = { .d32 = 0 }; + grxfsiz_t grxfsiz = { .d32 = 0 }; + hcintmsk_t hcintmsk = { .d32 = 0 }; + gnptxfsiz_t gnptxfsiz = { .d32 = 0 }; + + const int timeout = 10000; + int i; + + /* Wait for AHB idle */ + for (i = 0; i < timeout; i++) { + udelay(1); + grstctl.d32 = readl(®->core.grstctl); + if (grstctl.ahbidle) + break; + } + if (i == timeout) + fatal("DWC2 Init error AHB Idle\n"); + + /* Restart the Phy Clock */ + writel(0x0, ®->pcgr.pcgcctl); + /* Core soft reset */ + grstctl.csftrst = 1; + writel(grstctl.d32, ®->core.grstctl); + for (i = 0; i < timeout; i++) { + udelay(1); + grstctl.d32 = readl(®->core.grstctl); + if (!grstctl.csftrst) + break; + } + if (i == timeout) + fatal("DWC2 Init error reset fail\n"); + + /* Set 16bit PHY if & Force host mode */ + gusbcfg.d32 = readl(®->core.gusbcfg); + gusbcfg.phyif = 1; + gusbcfg.forcehstmode = 1; + gusbcfg.forcedevmode = 0; + writel(gusbcfg.d32, ®->core.gusbcfg); + /* Wait for force host mode effect, it may takes 100ms */ + for (i = 0; i < timeout; i++) { + udelay(10); + gintsts.d32 = readl(®->core.gintsts); + if (gintsts.curmod) + break; + } + if (i == timeout) + fatal("DWC2 Init error force host mode fail\n"); + + /* + * Config FIFO + * The non-periodic tx fifo and rx fifo share one continuous + * piece of IP-internal SRAM. + */ + grxfsiz.rxfdep = DWC2_RXFIFO_DEPTH; + writel(grxfsiz.d32, ®->core.grxfsiz); + gnptxfsiz.nptxfstaddr = DWC2_RXFIFO_DEPTH; + gnptxfsiz.nptxfdep = DWC2_NPTXFIFO_DEPTH; + writel(gnptxfsiz.d32, ®->core.gnptxfsiz); + + /* Init host channels */ + hcintmsk.xfercomp = 1; + hcintmsk.xacterr = 1; + hcintmsk.stall = 1; + hcintmsk.chhltd = 1; + hcintmsk.bblerr = 1; + for (i = 0; i < MAX_EPS_CHANNELS; i++) + writel(hcintmsk.d32, ®->host.hchn[i].hcintmaskn); + + /* Unmask interrupt and configure DMA mode */ + gahbcfg.glblintrmsk = 1; + gahbcfg.hbstlen = DMA_BURST_INCR8; + gahbcfg.dmaen = 1; + writel(gahbcfg.d32, ®->core.gahbcfg); + + DWC2_INST(controller)->hprt0 = ®->host.hprt; + + usb_debug("DWC2 init finished!\n"); +} + +static void dwc2_shutdown(hci_t *controller) +{ + detach_controller(controller); + free(DWC2_INST(controller)->dma_buffer); + free(DWC2_INST(controller)); + free(controller); +} + +/* + * This function returns the actual transfer length when the transfer succeeded + * or an error code if the transfer failed + */ +static int +wait_for_complete(endpoint_t *ep, uint32_t ch_num) +{ + hcint_t hcint; + hcchar_t hcchar; + hctsiz_t hctsiz; + dwc2_reg_t *reg = DWC2_REG(ep->dev->controller); + int timeout = 600000; /* time out after 600000 * 5us == 3s */ + + /* + * TODO: We should take care of up to three times of transfer error + * retry here, according to the USB 2.0 spec 4.5.2 + */ + do { + udelay(5); + hcint.d32 = readl(®->host.hchn[ch_num].hcintn); + hctsiz.d32 = readl(®->host.hchn[ch_num].hctsizn); + + if (hcint.chhltd) { + writel(hcint.d32, ®->host.hchn[ch_num].hcintn); + + if (hcint.xfercomp) + return hctsiz.xfersize; + else if (hcint.xacterr) + return -HCSTAT_XFERERR; + else if (hcint.bblerr) + return -HCSTAT_BABBLE; + else if (hcint.stall) + return -HCSTAT_STALL; + else + return -HCSTAT_UNKNOW; + } + } while (timeout--); + + /* Release the channel on timeout */ + hcchar.d32 = readl(®->host.hchn[ch_num].hccharn); + if (hcchar.chen) { + /* + * Programming the HCCHARn register with the chdis and + * chena bits set to 1 at the same time to disable the + * channel and the core will generate a channel halted + * interrupt. + */ + hcchar.chdis = 1; + writel(hcchar.d32, ®->host.hchn[ch_num].hccharn); + do { + hcchar.d32 = readl(®->host.hchn[ch_num].hccharn); + } while (hcchar.chen); + + } + + /* Clear all pending interrupt flags */ + hcint.d32 = ~0; + writel(hcint.d32, ®->host.hchn[ch_num].hcintn); + + return -HCSTAT_TIMEOUT; +} + +static int +dwc2_transfer(endpoint_t *ep, int size, int pid, ep_dir_t dir, + uint32_t ch_num, u8 *data_buf) +{ + uint32_t do_copy; + int ret; + uint32_t packet_cnt; + uint32_t packet_size; + uint32_t transferred = 0; + uint32_t inpkt_length; + hctsiz_t hctsiz = { .d32 = 0 }; + hcchar_t hcchar = { .d32 = 0 }; + void *aligned_buf; + dwc2_reg_t *reg = DWC2_REG(ep->dev->controller); + + packet_size = ep->maxpacketsize; + packet_cnt = ALIGN_UP(size, packet_size) / packet_size; + inpkt_length = packet_cnt * packet_size; + /* At least 1 packet should be programed */ + packet_cnt = (packet_cnt == 0) ? 1 : packet_cnt; + + /* + * For an IN, this field is the buffer size that the application has + * reserved for the transfer. The application should program this field + * as integer multiple of the maximum packet size for IN transactions. + */ + hctsiz.xfersize = (dir == EPDIR_OUT) ? size : inpkt_length; + hctsiz.pktcnt = packet_cnt; + hctsiz.pid = pid; + + hcchar.mps = packet_size; + hcchar.epnum = ep->endpoint & 0xf; + hcchar.epdir = dir; + hcchar.eptype = ep->type; + hcchar.multicnt = 1; + hcchar.devaddr = ep->dev->address; + hcchar.chdis = 0; + hcchar.chen = 1; + + if (size > DMA_SIZE) { + usb_debug("Transfer too large: %d\n", size); + return -1; + } + + /* + * Check the buffer address which should be 4-byte aligned and DMA + * coherent + */ + do_copy = !dma_coherent(data_buf) || ((uintptr_t)data_buf & 0x3); + aligned_buf = do_copy ? DWC2_INST(ep->dev->controller)->dma_buffer : + data_buf; + + if (do_copy && (dir == EPDIR_OUT)) + memcpy(aligned_buf, data_buf, size); + + writel(hctsiz.d32, ®->host.hchn[ch_num].hctsizn); + writel((uint32_t)aligned_buf, ®->host.hchn[ch_num].hcdman); + writel(hcchar.d32, ®->host.hchn[ch_num].hccharn); + + ret = wait_for_complete(ep, ch_num); + + if (ret >= 0) { + /* Calculate actual transferred length */ + transferred = (dir == EPDIR_IN) ? inpkt_length - ret : ret; + + if (do_copy && (dir == EPDIR_IN)) + memcpy(data_buf, aligned_buf, transferred); + } + + /* Save data toggle */ + hctsiz.d32 = readl(®->host.hchn[ch_num].hctsizn); + ep->toggle = hctsiz.pid; + + if (ret < 0) { + usb_debug("%s Transfer stop code: %x\n", __func__, ret); + return ret; + } + return transferred; +} + +static int +dwc2_bulk(endpoint_t *ep, int size, u8 *src, int finalize) +{ + ep_dir_t data_dir; + + if (ep->direction == IN) + data_dir = EPDIR_IN; + else if (ep->direction == OUT) + data_dir = EPDIR_OUT; + else + return -1; + + return dwc2_transfer(ep, size, ep->toggle, data_dir, 0, src); +} + +static int +dwc2_control(usbdev_t *dev, direction_t dir, int drlen, void *setup, + int dalen, u8 *src) +{ + int ret = 0; + + ep_dir_t data_dir; + + if (dir == IN) + data_dir = EPDIR_IN; + else if (dir == OUT) + data_dir = EPDIR_OUT; + else + return -1; + + /* Setup Phase */ + if (dwc2_transfer(&dev->endpoints[0], drlen, PID_SETUP, EPDIR_OUT, 0, + setup) < 0) + return -1; + /* Data Phase */ + if (dalen > 0) { + ret = dwc2_transfer(&dev->endpoints[0], dalen, PID_DATA1, + data_dir, 0, src); + if (ret < 0) + return -1; + } + /* Status Phase */ + if (dwc2_transfer(&dev->endpoints[0], 0, PID_DATA1, !data_dir, 0, + NULL) < 0) + return -1; + + return ret; +} + +hci_t *dwc2_init(void *bar) +{ + hci_t *controller = new_controller(); + controller->instance = xzalloc(sizeof(dwc_ctrl_t)); + + DWC2_INST(controller)->dma_buffer = dma_malloc(DMA_SIZE); + if (!DWC2_INST(controller)->dma_buffer) { + usb_debug("Not enough DMA memory for DWC2 bounce buffer\n"); + goto free_dwc2; + } + + controller->type = DWC2; + controller->start = dummy; + controller->stop = dummy; + controller->reset = dummy; + controller->init = dwc2_reinit; + controller->shutdown = dwc2_shutdown; + controller->bulk = dwc2_bulk; + controller->control = dwc2_control; + controller->set_address = generic_set_address; + controller->finish_device_config = NULL; + controller->destroy_device = NULL; + controller->create_intr_queue = NULL; + controller->destroy_intr_queue = NULL; + controller->poll_intr_queue = NULL; + controller->reg_base = (uintptr_t)bar; + init_device_entry(controller, 0); + + /* Init controller */ + controller->init(controller); + + /* Setup up root hub */ + controller->devices[0]->controller = controller; + controller->devices[0]->init = dwc2_rh_init; + controller->devices[0]->init(controller->devices[0]); + return controller; + +free_dwc2: + detach_controller(controller); + free(DWC2_INST(controller)); + free(controller); + return NULL; +} diff --git a/payloads/libpayload/drivers/usb/dwc2.h b/payloads/libpayload/drivers/usb/dwc2.h new file mode 100644 index 0000000000..e9ca39db86 --- /dev/null +++ b/payloads/libpayload/drivers/usb/dwc2.h @@ -0,0 +1,27 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Rockchip Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __DWC2_HCD_H__ +#define __DWC2_HCD_H__ +#include <usb/usb.h> + +hci_t *dwc2_init(void *bar); +void dwc2_rh_init (usbdev_t *dev); + +#endif diff --git a/payloads/libpayload/drivers/usb/dwc2_private.h b/payloads/libpayload/drivers/usb/dwc2_private.h new file mode 100644 index 0000000000..9bd83763ea --- /dev/null +++ b/payloads/libpayload/drivers/usb/dwc2_private.h @@ -0,0 +1,643 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Rockchip Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __DWC2_REGS_H__ +#define __DWC2_REGS_H__ +#define MAX_EPS_CHANNELS 16 + +typedef struct core_reg { + uint32_t gotgctl; + uint32_t gotgint; + uint32_t gahbcfg; + uint32_t gusbcfg; + uint32_t grstctl; + uint32_t gintsts; + uint32_t gintmsk; + uint32_t grxstsr; + uint32_t grxstsp; + uint32_t grxfsiz; + uint32_t gnptxfsiz; + uint32_t gnptxsts; + uint32_t gi2cctl; + uint32_t gpvndctl; + uint32_t ggpio; + uint32_t guid; + uint32_t gsnpsid; + uint32_t ghwcfg1; + uint32_t ghwcfg2; + uint32_t ghwcfg3; + uint32_t ghwcfg4; + uint32_t reserved1[(0x100 - 0x54) / 4]; + uint32_t hptxfsiz; + uint32_t dptxfsiz_dieptxf[15]; + uint32_t reserved2[(0x400 - 0x140) / 4]; +} core_reg_t; + +typedef struct hc_reg { + uint32_t hccharn; + uint32_t hcspltn; + uint32_t hcintn; + uint32_t hcintmaskn; + uint32_t hctsizn; + uint32_t hcdman; + uint32_t reserved[2]; +} hc_reg_t; + +/* Host Mode Register Structures */ +typedef struct host_reg { + uint32_t hcfg; + uint32_t hfir; + uint32_t hfnum; + uint32_t reserved0; + uint32_t hptxsts; + uint32_t haint; + uint32_t haintmsk; + uint32_t reserved1[(0x440 - 0x41c) / 4]; + uint32_t hprt; + uint32_t reserved2[(0x500 - 0x444) / 4]; + hc_reg_t hchn[MAX_EPS_CHANNELS]; + uint32_t reserved3[(0x800 - 0x700) / 4]; +} host_reg_t; + +/* Device IN ep reg */ +typedef struct in_ep_reg { + uint32_t diepctl; + uint32_t reserved04; + uint32_t diepint; + uint32_t reserved0c; + uint32_t dieptsiz; + uint32_t diepdma; + uint32_t dtxfsts; + uint32_t diepdmab; +} in_ep_reg_t; + +typedef struct out_ep_reg { + uint32_t doepctl; + uint32_t reserved04; + uint32_t doepint; + uint32_t reserved0c; + uint32_t doeptsiz; + uint32_t doepdma; + uint32_t reserved18; + uint32_t doepdmab; +} out_ep_reg_t; + +/* Device Mode Registers Structures */ +typedef struct device_reg { + uint32_t dcfg; + uint32_t dctl; + uint32_t dsts; + uint32_t unused; + uint32_t diepmsk; + uint32_t doepmsk; + uint32_t daint; + uint32_t daintmsk; + uint32_t dtknqr1; + uint32_t dtknqr2; + uint32_t dvbusdis; + uint32_t dvbuspulse; + uint32_t dtknqr3_dthrctl; + uint32_t dtknqr4_fifoemptymsk; + uint32_t reserved1[(0x900 - 0x838) / 4]; + + in_ep_reg_t inep[MAX_EPS_CHANNELS]; + out_ep_reg_t outep[MAX_EPS_CHANNELS]; + uint32_t reserved8[(0xe00 - 0xd00) / 4]; +} device_reg_t; + +typedef struct pwr_clk_ctrl_reg { + uint32_t pcgcctl; + uint32_t reserved[(0x1000 - 0xe04) / 4]; +} pwr_clk_ctrl_reg_t; + +typedef struct data_fifo { + uint32_t dataport; + uint32_t reserved[(0x1000 - 0x004) / 4]; +} data_fifo_t; + +typedef struct dwc2_otg_reg { + core_reg_t core; + host_reg_t host; + device_reg_t device; + pwr_clk_ctrl_reg_t pcgr; + data_fifo_t dfifo[MAX_EPS_CHANNELS]; + uint32_t reserved[(0x40000 - 0x11000) / 4]; +} dwc2_reg_t; + +/** + * This union represents the bit fields of the Core AHB Configuration + * Register (GAHBCFG). + */ +typedef union { + /* raw register data */ + uint32_t d32; + /* register bits */ + struct { + unsigned glblintrmsk:1; +#define GLBINT_ENABLE 1 + + unsigned hbstlen:4; +#define DMA_BURST_SINGLE 0 +#define DMA_BURST_INCR 1 +#define DMA_BURST_INCR4 3 +#define DMA_BURST_INCR8 5 +#define DMA_BURST_INCR16 7 + + unsigned dmaen:1; + unsigned reserved:1; + unsigned nptxfemplvl:1; + unsigned ptxfemplvl:1; + unsigned reserved9_31:23; + }; +} gahbcfg_t; + +/** + * This union represents the bit fields of the Core USB Configuration + * Register (GUSBCFG). + */ +typedef union { + /* raw register data */ + uint32_t d32; + /* register bits */ + struct { + unsigned toutcal:3; + unsigned phyif:1; + unsigned ulpiutmisel:1; + unsigned fsintf:1; + unsigned physel:1; + unsigned ddrsel:1; + unsigned srpcap:1; + unsigned hnpcap:1; + unsigned usbtrdtim:4; + unsigned reserved14:1; + unsigned phylpwrclksel:1; + unsigned otgi2csel:1; + unsigned ulpifsls:1; + unsigned ulpiautores:1; + unsigned ulpiclksusm:1; + unsigned ulpiextvbusdrv:1; + unsigned ulpiextvbusindicator:1; + unsigned termseldlpulse:1; + unsigned reserved23_28:6; + unsigned forcehstmode:1; + unsigned forcedevmode:1; + unsigned cortxpkt:1; + }; +} gusbcfg_t; + +/** + * This union represents the bit fields of the Core Reset Register + * (GRSTCTL). + */ +typedef union { + /* raw register data */ + uint32_t d32; + /* register bits */ + struct { + /** Core Soft Reset (CSftRst) (Device and Host) + * + * The application can flush the control logic in the + * entire core using this bit. This bit resets the + * pipelines in the AHB Clock domain as well as the + * PHY Clock domain. + * + * The state machines are reset to an IDLE state, the + * control bits in the CSRs are cleared, all the + * transmit FIFOs and the receive FIFO are flushed. + * + * The status mask bits that control the generation of + * the interrupt, are cleared, to clear the + * interrupt. The interrupt status bits are not + * cleared, so the application can get the status of + * any events that occurred in the core after it has + * set this bit. + * + * Any transactions on the AHB are terminated as soon + * as possible following the protocol. Any + * transactions on the USB are terminated immediately. + * + * The configuration settings in the CSRs are + * unchanged, so the software doesn't have to + * reprogram these registers (Device + * Configuration/Host Configuration/Core System + * Configuration/Core PHY Configuration). + * + * The application can write to this bit, any time it + * wants to reset the core. This is a self clearing + * bit and the core clears this bit after all the + * necessary logic is reset in the core, which may + * take several clocks, depending on the current state + * of the core. + */ + unsigned csftrst:1; + /** Hclk Soft Reset + * + * The application uses this bit to reset the control logic in + * the AHB clock domain. Only AHB clock domain pipelines are + * reset. + */ + unsigned hsftrst:1; + /** Host Frame Counter Reset (Host Only)<br> + * + * The application can reset the (micro)frame number + * counter inside the core, using this bit. When the + * (micro)frame counter is reset, the subsequent SOF + * sent out by the core, will have a (micro)frame + * number of 0. + */ + unsigned frmcntrrst:1; + /** In Token Sequence Learning Queue Flush + * (INTknQFlsh) (Device Only) + */ + unsigned intknqflsh:1; + /** RxFIFO Flush (RxFFlsh) (Device and Host) + * + * The application can flush the entire Receive FIFO + * using this bit. <p>The application must first + * ensure that the core is not in the middle of a + * transaction. <p>The application should write into + * this bit, only after making sure that neither the + * DMA engine is reading from the RxFIFO nor the MAC + * is writing the data in to the FIFO. <p>The + * application should wait until the bit is cleared + * before performing any other operations. This bit + * will takes 8 clocks (slowest of PHY or AHB clock) + * to clear. + */ + unsigned rxfflsh:1; + /** TxFIFO Flush (TxFFlsh) (Device and Host). + * + * This bit is used to selectively flush a single or + * all transmit FIFOs. The application must first + * ensure that the core is not in the middle of a + * transaction. <p>The application should write into + * this bit, only after making sure that neither the + * DMA engine is writing into the TxFIFO nor the MAC + * is reading the data out of the FIFO. <p>The + * application should wait until the core clears this + * bit, before performing any operations. This bit + * will takes 8 clocks (slowest of PHY or AHB clock) + * to clear. + */ + unsigned txfflsh:1; + + /** TxFIFO Number (TxFNum) (Device and Host). + * + * This is the FIFO number which needs to be flushed, + * using the TxFIFO Flush bit. This field should not + * be changed until the TxFIFO Flush bit is cleared by + * the core. + * - 0x0 : Non Periodic TxFIFO Flush + * - 0x1 : Periodic TxFIFO #1 Flush in device mode + * or Periodic TxFIFO in host mode + * - 0x2 : Periodic TxFIFO #2 Flush in device mode. + * - ... + * - 0xF : Periodic TxFIFO #15 Flush in device mode + * - 0x10: Flush all the Transmit NonPeriodic and + * Transmit Periodic FIFOs in the core + */ + unsigned txfnum:5; + /** Reserved */ + unsigned reserved11_29:19; + /** DMA Request Signal. Indicated DMA request is in + * probress. Used for debug purpose. */ + unsigned dmareq:1; + /** AHB Master Idle. Indicates the AHB Master State + * Machine is in IDLE condition. */ + unsigned ahbidle:1; + } ; +} grstctl_t; + +/** + * This union represents the bit fields of the Core Interrupt Mask + * Register (GINTMSK). + */ +typedef union { + /* raw register data */ + uint32_t d32; + /* register bits */ + struct { + unsigned curmod:1; + unsigned modemis:1; + unsigned otgint:1; + unsigned sof:1; + unsigned rxflvl:1; + unsigned nptxfemp:1; + unsigned ginnakeff:1; + unsigned goutnakeff:1; + unsigned reserved8:1; + unsigned i2cint:1; + unsigned erlysusp:1; + unsigned usbsusp:1; + unsigned usbrst:1; + unsigned enumdone:1; + unsigned isooutdrop:1; + unsigned eopf:1; + unsigned reserved16_20:5; + unsigned incompip:1; + unsigned reserved22_23:2; + unsigned prtint:1; + unsigned hchint:1; + unsigned ptxfemp:1; + unsigned reserved27:1; + unsigned conidstschng:1; + unsigned disconnint:1; + unsigned sessreqint:1; + unsigned wkupint:1; + } ; +} gintmsk_t; + +/** +* This union represents the bit fields of the Core Non-Periodic +* Transmit FIFO Size Register(GNPTXFSIZ). +*/ +typedef union { + /* raw register data */ + uint32_t d32; + /* register bits */ + struct { + unsigned nptxfstaddr:16; + unsigned nptxfdep:16; +#define DWC2_NPTXFIFO_DEPTH 0x80 + }; +} gnptxfsiz_t; + +/** + * This union represents the bit fields of the Core Receive FIFO Size + * Register(GRXFSIZ). + */ +typedef union { + /* raw register data */ + uint32_t d32; + /* register bits */ + /*The value in this fieles is in terms of 32-bit words size. + */ + struct { + unsigned rxfdep:16; +#define DWC2_RXFIFO_DEPTH 0x200 + unsigned reserved:16; + }; +} grxfsiz_t; + +/** + * This union represents the bit fields of the Core Interrupt Register + * (GINTSTS). + */ +typedef union { + /* raw register data */ + uint32_t d32; +#define SOF_INTR_MASK 0x0008 + /* register bits */ + struct { + unsigned curmod:1; +#define HOST_MODE 1 +#define DEVICE_MODE 0 + unsigned modemis:1; + unsigned otgint:1; + unsigned sof:1; + unsigned rxflvl:1; + unsigned nptxfemp:1; + unsigned ginnakeff:1; + unsigned goutnakeff:1; + unsigned reserved8:1; + unsigned i2cint:1; + unsigned erlysusp:1; + unsigned usbsusp:1; + unsigned usbrst:1; + unsigned enumdone:1; + unsigned isooutdrop:1; + unsigned eopf:1; + unsigned reserved16_20:5; + unsigned incompip:1; + unsigned reserved22_23:2; + unsigned prtint:1; + unsigned hchint:1; + unsigned ptxfemp:1; + unsigned reserved27:1; + unsigned conidstschng:1; + unsigned disconnint:1; + unsigned sessreqint:1; + unsigned wkupint:1; + }; +} gintsts_t; + +/** + * This union represents the bit fields in the Host Configuration Register. + */ +typedef union { + /* raw register data */ + uint32_t d32; + + /* register bits */ + struct { + /** FS/LS Phy Clock Select */ + unsigned fslspclksel:2; +#define PHYCLK_30_60_MHZ 0 +#define PHYCLK_48_MHZ 1 +#define PHYCLK_6_MHZ 2 + + /** FS/LS Only Support */ + unsigned fslssupp:1; + }; +} hcfg_t; + +/** + * This union represents the bit fields in the Host Port Control and status + * Register. + */ +typedef union { + /* raw register data */ + uint32_t d32; + /* register bits */ + struct { + unsigned prtconnsts:1; + unsigned prtconndet:1; + unsigned prtena:1; + unsigned prtenchng:1; + unsigned prtovrcurract:1; + unsigned prtovrcurrchng:1; + unsigned prtres:1; + unsigned prtsusp:1; + unsigned prtrst:1; + unsigned reserved9:1; + unsigned prtlnsts:2; + unsigned prtpwr:1; + unsigned prttstctl:4; + unsigned prtspd:2; +#define PRTSPD_HIGH 0 +#define PRTSPD_FULL 1 +#define PRTSPD_LOW 2 + unsigned reserved19_31:13; + }; +} hprt_t; +/* Mask W1C bits */ +#define HPRT_W1C_MASK (~((1 << 1) | (1 << 2) | (1 << 3) | (1 << 5))) + +/** + * This union represents the bit fields in the Host Channel Characteristics + * Register. + */ +typedef union { + /* raw register data */ + uint32_t d32; + + /* register bits */ + struct { + /** Maximum packet size in bytes */ + unsigned mps:11; + /** Endpoint number */ + unsigned epnum:4; + /** 0: OUT, 1: IN */ + unsigned epdir:1; + unsigned reserved:1; + /** 0: Full/high speed device, 1: Low speed device */ + unsigned lspddev:1; + /** 0: Control, 1: Isoc, 2: Bulk, 3: Intr */ + unsigned eptype:2; + /** Packets per frame for periodic transfers. 0 is reserved. */ + unsigned multicnt:2; + /** Device address */ + unsigned devaddr:7; + /** + * Frame to transmit periodic transaction. + * 0: even, 1: odd + */ + unsigned oddfrm:1; + /** Channel disable */ + unsigned chdis:1; + /** Channel enable */ + unsigned chen:1; + }; +} hcchar_t; + +typedef enum { + EPDIR_OUT = 0, + EPDIR_IN, +} ep_dir_t; + +/** + * This union represents the bit fields in the Host All Interrupt + * Register. + */ +typedef union { + /* raw register data */ + uint32_t d32; + /* register bits */ + struct { + /** Transfer Complete */ + unsigned xfercomp:1; + /** Channel Halted */ + unsigned chhltd:1; + /** AHB Error */ + unsigned ahberr:1; + /** STALL Response Received */ + unsigned stall:1; + /** NAK Response Received */ + unsigned nak:1; + /** ACK Response Received */ + unsigned ack:1; + /** NYET Response Received */ + unsigned nyet:1; + /** Transaction Err */ + unsigned xacterr:1; + /** Babble Error */ + unsigned bblerr:1; + /** Frame Overrun */ + unsigned frmovrun:1; + /** Data Toggle Error */ + unsigned datatglerr:1; + /** Reserved */ + unsigned reserved:21; + }; +} hcint_t; + +/** + * This union represents the bit fields in the Host Channel Transfer Size + * Register. + */ +typedef union { + /* raw register data */ + uint32_t d32; + + /* register bits */ + struct { + /* Total transfer size in bytes */ + unsigned xfersize:19; + /** Data packets to transfer */ + unsigned pktcnt:10; + /** + * Packet ID for next data packet + * 0: DATA0 + * 1: DATA2 + * 2: DATA1 + * 3: MDATA (non-Control), SETUP (Control) + */ + unsigned pid:2; +#define PID_DATA0 0 +#define PID_DATA1 2 +#define PID_DATA2 1 +#define PID_MDATA 3 +#define PID_SETUP 3 + /* Do PING protocol when 1 */ + unsigned dopng:1; + }; +} hctsiz_t; + +/** + * This union represents the bit fields in the Host Channel Interrupt Mask + * Register. + */ +typedef union { + /* raw register data */ + uint32_t d32; + /* register bits */ + struct { + unsigned xfercomp:1; + unsigned chhltd:1; + unsigned ahberr:1; + unsigned stall:1; + unsigned nak:1; + unsigned ack:1; + unsigned nyet:1; + unsigned xacterr:1; + unsigned bblerr:1; + unsigned frmovrun:1; + unsigned datatglerr:1; + unsigned reserved:21; + }; +} hcintmsk_t; + +typedef struct dwc_ctrl { +#define DMA_SIZE (64 * 1024) + void *dma_buffer; + uint32_t *hprt0; +} dwc_ctrl_t; + +#define DWC2_INST(controller) ((dwc_ctrl_t *)((controller)->instance)) +#define DWC2_REG(controller) ((dwc2_reg_t *)((controller)->reg_base)) + +typedef enum { + HCSTAT_DONE = 0, + HCSTAT_XFERERR, + HCSTAT_BABBLE, + HCSTAT_STALL, + HCSTAT_UNKNOW, + HCSTAT_TIMEOUT, +} hcstat_t; +#endif diff --git a/payloads/libpayload/drivers/usb/dwc2_rh.c b/payloads/libpayload/drivers/usb/dwc2_rh.c new file mode 100644 index 0000000000..3dd504279b --- /dev/null +++ b/payloads/libpayload/drivers/usb/dwc2_rh.c @@ -0,0 +1,188 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Rockchip Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +#include <usb/usb.h> +#include "generic_hub.h" +#include "dwc2_private.h" +#include "dwc2.h" + +static int +dwc2_rh_port_status_changed(usbdev_t *const dev, const int port) +{ + hprt_t hprt; + int changed; + dwc_ctrl_t *const dwc2 = DWC2_INST(dev->controller); + + hprt.d32 = readl(dwc2->hprt0); + changed = hprt.prtconndet; + + /* Clear connect detect flag */ + if (changed) { + hprt.d32 &= HPRT_W1C_MASK; + hprt.prtconndet = 1; + writel(hprt.d32, dwc2->hprt0); + } + return changed; +} + +static int +dwc2_rh_port_connected(usbdev_t *const dev, const int port) +{ + hprt_t hprt; + dwc_ctrl_t *const dwc2 = DWC2_INST(dev->controller); + + hprt.d32 = readl(dwc2->hprt0); + return hprt.prtconnsts; +} + +static int +dwc2_rh_port_in_reset(usbdev_t *const dev, const int port) +{ + hprt_t hprt; + dwc_ctrl_t *const dwc2 = DWC2_INST(dev->controller); + + hprt.d32 = readl(dwc2->hprt0); + return hprt.prtrst; +} + +static int +dwc2_rh_port_enabled(usbdev_t *const dev, const int port) +{ + hprt_t hprt; + dwc_ctrl_t *const dwc2 = DWC2_INST(dev->controller); + + hprt.d32 = readl(dwc2->hprt0); + return hprt.prtena; +} + +static usb_speed +dwc2_rh_port_speed(usbdev_t *const dev, const int port) +{ + hprt_t hprt; + dwc_ctrl_t *const dwc2 = DWC2_INST(dev->controller); + + hprt.d32 = readl(dwc2->hprt0); + if (hprt.prtena) { + switch (hprt.prtspd) { + case PRTSPD_HIGH: + return HIGH_SPEED; + case PRTSPD_FULL: + return FULL_SPEED; + case PRTSPD_LOW: + return LOW_SPEED; + } + } + return -1; +} + +static int +dwc2_rh_reset_port(usbdev_t *const dev, const int port) +{ + hprt_t hprt; + dwc_ctrl_t *const dwc2 = DWC2_INST(dev->controller); + + hprt.d32 = readl(dwc2->hprt0); + hprt.d32 &= HPRT_W1C_MASK; + hprt.prtrst = 1; + writel(hprt.d32, dwc2->hprt0); + + /* Wait a bit while reset is active. */ + mdelay(50); + + /* Deassert reset. */ + hprt.prtrst = 0; + writel(hprt.d32, dwc2->hprt0); + + /* + * If reset and speed enum success the DWC2 core will set enable bit + * after port reset bit is deasserted + */ + mdelay(1); + hprt.d32 = readl(dwc2->hprt0); + usb_debug("%s reset port ok, hprt = 0x%08x\n", __func__, hprt.d32); + + if (!hprt.prtena) { + usb_debug("%s enable port fail! hprt = 0x%08x\n", + __func__, hprt.d32); + return -1; + } + + return 0; +} + +static int +dwc2_rh_enable_port(usbdev_t *const dev, const int port) +{ + hprt_t hprt; + dwc_ctrl_t *const dwc2 = DWC2_INST(dev->controller); + + /* Power on the port */ + hprt.d32 = readl(dwc2->hprt0); + hprt.d32 &= HPRT_W1C_MASK; + hprt.prtpwr = 1; + writel(hprt.d32, dwc2->hprt0); + return 0; +} + +static int +dwc2_rh_disable_port(usbdev_t *const dev, const int port) +{ + hprt_t hprt; + dwc_ctrl_t *const dwc2 = DWC2_INST(dev->controller); + + hprt.d32 = readl(dwc2->hprt0); + hprt.d32 &= HPRT_W1C_MASK; + /* Disable the port*/ + hprt.prtena = 1; + /* Power off the port */ + hprt.prtpwr = 0; + writel(hprt.d32, dwc2->hprt0); + return 0; +} + +static const generic_hub_ops_t dwc2_rh_ops = { + .hub_status_changed = NULL, + .port_status_changed = dwc2_rh_port_status_changed, + .port_connected = dwc2_rh_port_connected, + .port_in_reset = dwc2_rh_port_in_reset, + .port_enabled = dwc2_rh_port_enabled, + .port_speed = dwc2_rh_port_speed, + .enable_port = dwc2_rh_enable_port, + .disable_port = dwc2_rh_disable_port, + .start_port_reset = NULL, + .reset_port = dwc2_rh_reset_port, +}; + +void +dwc2_rh_init(usbdev_t *dev) +{ + dwc_ctrl_t *const dwc2 = DWC2_INST(dev->controller); + + /* we can set them here because a root hub _really_ shouldn't + appear elsewhere */ + dev->address = 0; + dev->hub = -1; + dev->port = -1; + + generic_hub_init(dev, 1, &dwc2_rh_ops); + usb_debug("dwc2_rh_init HPRT 0x%08x p = %p\n ", + readl(dwc2->hprt0), dwc2->hprt0); + usb_debug("DWC2: root hub init done\n"); +} diff --git a/payloads/libpayload/drivers/usb/usbinit.c b/payloads/libpayload/drivers/usb/usbinit.c index 4225c3f153..7a5828def7 100644 --- a/payloads/libpayload/drivers/usb/usbinit.c +++ b/payloads/libpayload/drivers/usb/usbinit.c @@ -34,6 +34,7 @@ #include "ohci.h" #include "ehci.h" #include "xhci.h" +#include "dwc2.h" #include <usb/usbdisk.h> #ifdef CONFIG_LP_USB_PCI @@ -182,6 +183,10 @@ hci_t *usb_add_mmio_hc(hc_type type, void *bar) case EHCI: return ehci_init((unsigned long)bar); #endif +#ifdef CONFIG_LP_USB_DWC2 + case DWC2: + return dwc2_init(bar); +#endif #ifdef CONFIG_LP_USB_XHCI case XHCI: return xhci_init((unsigned long)bar); diff --git a/payloads/libpayload/include/usb/usb.h b/payloads/libpayload/include/usb/usb.h index 4d8b2c2ecd..df507db6ea 100644 --- a/payloads/libpayload/include/usb/usb.h +++ b/payloads/libpayload/include/usb/usb.h @@ -207,7 +207,7 @@ struct usbdev { void (*poll) (usbdev_t *dev); }; -typedef enum { OHCI = 0, UHCI = 1, EHCI = 2, XHCI = 3} hc_type; +typedef enum { OHCI = 0, UHCI = 1, EHCI = 2, XHCI = 3, DWC2 = 4} hc_type; struct usbdev_hc { hci_t *next; |