diff options
Diffstat (limited to 'payloads')
| -rw-r--r-- | payloads/libpayload/drivers/usb/usbinit.c | 111 |
1 files changed, 65 insertions, 46 deletions
diff --git a/payloads/libpayload/drivers/usb/usbinit.c b/payloads/libpayload/drivers/usb/usbinit.c index 8499b82411..f51783b2fa 100644 --- a/payloads/libpayload/drivers/usb/usbinit.c +++ b/payloads/libpayload/drivers/usb/usbinit.c @@ -42,8 +42,7 @@ * @param dev PCI device id at bus * @param func function id of the controller */ -int -usb_controller_initialize (int bus, int dev, int func) +int usb_controller_initialize(int bus, int dev, int func) { u32 class; u32 devclass; @@ -52,8 +51,8 @@ usb_controller_initialize (int bus, int dev, int func) u32 pciid; addr = PCI_DEV (bus, dev, func); - class = pci_read_config32 (addr, 8); - pciid = pci_read_config32 (addr, 0); + class = pci_read_config32(addr, 8); + pciid = pci_read_config32(addr, 0); devclass = class >> 16; prog_if = (class >> 8) & 0xff; @@ -64,78 +63,98 @@ usb_controller_initialize (int bus, int dev, int func) if (devclass == 0xc03) { u32 pci_command; - pci_command =pci_read_config32(addr, PCI_COMMAND); + pci_command = pci_read_config32(addr, PCI_COMMAND); pci_command |= PCI_COMMAND_MASTER; pci_write_config32(addr, PCI_COMMAND, pci_command); - printf ("%02x:%02x.%x %04x:%04x.%d ", bus, dev, func, + printf("%02x:%02x.%x %04x:%04x.%d ", bus, dev, func, pciid >> 16, pciid & 0xFFFF, func); - switch(prog_if) { - case 0x00: + switch (prog_if) { + case 0x00: #ifdef CONFIG_USB_UHCI - printf ("UHCI controller\n"); - uhci_init (addr); + printf("UHCI controller\n"); + uhci_init (addr); #else - printf ("UHCI controller (not supported)\n"); + printf("UHCI controller (not supported)\n"); #endif - break; + break; - case 0x10: + case 0x10: #ifdef CONFIG_USB_OHCI - printf ("OHCI controller\n"); - ohci_init(addr); + printf("OHCI controller\n"); + ohci_init(addr); #else - printf ("OHCI controller (not supported)\n"); + printf("OHCI controller (not supported)\n"); #endif - break; + break; - case 0x20: + case 0x20: #ifdef CONFIG_USB_EHCI - printf ("EHCI controller\n"); - ehci_init(addr); + printf("EHCI controller\n"); + ehci_init(addr); #else - printf ("EHCI controller (not supported)\n"); + printf("EHCI controller (not supported)\n"); #endif - break; + break; - case 0x30: + case 0x30: #ifdef CONFIG_USB_XHCI - printf ("xHCI controller\n"); - xhci_init(addr); + printf("xHCI controller\n"); + xhci_init(addr); #else - printf ("xHCI controller (not supported)\n"); + printf("xHCI controller (not supported)\n"); #endif - break; + break; - default: - printf ("unknown controller %x not supported\n", - prog_if); - break; + default: + printf("unknown controller %x not supported\n", + prog_if); + break; } } return 0; } +static void usb_scan_pci_bus(int bus) +{ + int dev, func; + for (dev = 0; dev < 32; dev++) { + u8 header_type; + pcidev_t addr = PCI_DEV(bus, dev, 0); + /* Check if there's a device here at all. */ + if (pci_read_config32(addr, REG_VENDOR_ID) == 0xffff) + continue; + header_type = pci_read_config8(addr, REG_HEADER_TYPE); + /* If this is a bridge, scan the bus on the other side. */ + if ((header_type & ~HEADER_TYPE_MULTIFUNCTION) == + HEADER_TYPE_BRIDGE) { + int sub_bus = + pci_read_config8(addr, REG_SECONDARY_BUS); + usb_scan_pci_bus(sub_bus); + continue; + } + /* + * EHCI is defined by standards to be at a higher function + * than the USB1 controllers. We don't want to init USB1 + + * devices just to "steal" those for USB2, so make sure USB2 + * comes first. + */ + /* Check for a multifunction device. */ + if (header_type & HEADER_TYPE_MULTIFUNCTION) + for (func = 7; func > 0; func--) + usb_controller_initialize(bus, dev, func); + /* Initialize function 0. */ + usb_controller_initialize(bus, dev, 0); + } +} + /** * Initialize all USB controllers attached to PCI. */ -int -usb_initialize (void) +int usb_initialize(void) { - int bus, dev, func; - /* EHCI is defined by standards to be at a - * higher function than the USB1 controllers. - * We don't want to init USB1 + devices just to - * "steal" those for USB2, so make sure USB2 - * comes first. - */ - for (bus = 0; bus < 256; bus++) - for (dev = 0; dev < 32; dev++) - if (pci_read_config32 (PCI_DEV(bus, dev, 0), 8) >> 16 != 0xffff) - for (func = 7; func >= 0 ; func--) - usb_controller_initialize (bus, dev, func); + usb_scan_pci_bus(0); usb_poll(); return 0; } - |