diff options
Diffstat (limited to 'payloads/libpayload')
-rw-r--r-- | payloads/libpayload/arch/x86/timer.c | 119 |
1 files changed, 116 insertions, 3 deletions
diff --git a/payloads/libpayload/arch/x86/timer.c b/payloads/libpayload/arch/x86/timer.c index 1ff2cd6d55..6dcfd5b27f 100644 --- a/payloads/libpayload/arch/x86/timer.c +++ b/payloads/libpayload/arch/x86/timer.c @@ -33,6 +33,10 @@ #include <libpayload.h> #include <arch/rdtsc.h> +#include <arch/cpuid.h> +#include <arch/msr.h> + +#define MSR_PLATFORM_INFO 0xce /** * @ingroup arch @@ -41,11 +45,11 @@ uint32_t cpu_khz; /** - * Calculate the speed of the processor for use in delays. + * @brief Measure the speed of the processor for use in delays * * @return The CPU speed in kHz. */ -unsigned int get_cpu_speed(void) +static unsigned int calibrate_pit(void) { unsigned long long start, end; const uint32_t clock_rate = 1193182; // 1.193182 MHz @@ -71,7 +75,116 @@ unsigned int get_cpu_speed(void) * clock_rate / (interval * 1000). Multiply that by the number of * measured clocks to get the kHz value. */ - cpu_khz = (end - start) * clock_rate / (1000 * interval); + return (end - start) * clock_rate / (1000 * interval); +} + +/** + * @brief Calculates the core clock frequency via CPUID 0x15 + * + * Newer Intel CPUs report their core clock in CPUID leaf 0x15. Early models + * supporting this leaf didn't provide the nominal crystal frequency in ecx, + * hence we use hard coded values for them. + */ +static int get_cpu_khz_xtal(void) +{ + uint32_t ecx, edx, num, denom; + uint64_t nominal; + + if (cpuid_max() < 0x15) + return -1; + cpuid(0x15, denom, num, ecx, edx); + + if (denom == 0 || num == 0) + return -1; + + if (ecx != 0) { + nominal = ecx; + } else { + if (cpuid_family() != 6) + return -1; + + switch (cpuid_model()) { + case SKYLAKE_U_Y: + case SKYLAKE_S_H: + case KABYLAKE_U_Y: + case KABYLAKE_S_H: + nominal = 24000000; + break; + case APOLLOLAKE: + nominal = 19200000; + break; + default: + return -1; + } + } + + return nominal * num / denom / 1000; +} + +/** + * @brief Returns three times the bus clock in kHz + * + * The result of calculations with the returned value shall be divided by 3. + * This helps to avoid rounding errors. + */ +static int get_bus_khz_x3(void) +{ + if (cpuid_family() != 6) + return -1; + + switch (cpuid_model()) { + case NEHALEM: + return 400 * 1000; /* 133 MHz */ + case SANDYBRIDGE: + case IVYBRIDGE: + case HASWELL: + case HASWELL_U: + case HASWELL_GT3E: + case BROADWELL: + case BROADWELL_U: + return 300 * 1000; /* 100 MHz */ + default: + return -1; + } +} + +/** + * @brief Returns the calculated CPU frequency + * + * Over the years, multiple ways to discover the CPU frequency have been + * exposed through CPUID and MSRs. Try the most recent and accurate first + * (crystal information in CPUID leaf 0x15) and then fall back to older + * methods. + * + * This should cover all Intel Core i processors at least. For older + * processors we fall back to the PIT calibration. + */ +static int get_cpu_khz_fast(void) +{ + /* Try core crystal clock frequency first (supposed to be more accurate). */ + const int cpu_khz_xtal = get_cpu_khz_xtal(); + if (cpu_khz_xtal > 0) + return cpu_khz_xtal; + + /* Try `bus clock * speedstep multiplier`. */ + const int bus_x3 = get_bus_khz_x3(); + if (bus_x3 <= 0) + return -1; + /* + * Systems with an invariant TSC report the multiplier (maximum + * non-turbo ratio) in MSR_PLATFORM_INFO[15:8]. + */ + const unsigned int mult = _rdmsr(MSR_PLATFORM_INFO) >> 8 & 0xff; + return bus_x3 * mult / 3; +} + +unsigned int get_cpu_speed(void) +{ + const int cpu_khz_fast = get_cpu_khz_fast(); + if (cpu_khz_fast > 0) + cpu_khz = (unsigned int)cpu_khz_fast; + else + cpu_khz = calibrate_pit(); return cpu_khz; } |