diff options
Diffstat (limited to 'Documentation/mainboard')
| -rw-r--r-- | Documentation/mainboard/facebook/monolith.md | 38 |
1 files changed, 38 insertions, 0 deletions
diff --git a/Documentation/mainboard/facebook/monolith.md b/Documentation/mainboard/facebook/monolith.md index 0bc1448c45..dca2d6a688 100644 --- a/Documentation/mainboard/facebook/monolith.md +++ b/Documentation/mainboard/facebook/monolith.md @@ -13,12 +13,50 @@ fsp blobs 3rdparty/fsp/KabylakeFspBinPkg/Fsp_M.fd Microcode 3rdparty/intel-microcode/intel-ucode +## Flash components + +To create a complete flash image, the flash descriptor, GBE and ME blobs are required. The +complete image can be used when e.g. a blank flash should be programmed. In other cases (when +only coreboot needs to be replaced) placeholders can be used for the GBE and ME regions. + +These can be extracted from the original flash image as follows: +1) Read the complete image from flash. +2) Create a layout file with the following content: +``` +00000000:00000fff fd +00700000:00ffffff bios +00003000:006FFFFF me +00001000:00002fff gbe +``` +3) Use `ifdtool -n <layout_file> <flash_image>` to resize the *bios* region from the default 6MB + to 9 MB, this is required to create sufficient space for LinuxBoot. + NOTE: Please make sure only the firmware descriptor (*fd*) region is changed. Older versions + of the ifdtool corrupt the *me* region. +4) Use `ifdtool -x <resized_flash_image>` to extract the components. + +The regions extracted can be used to generate a full flash image. The *bios* region is +not needed as this is replaced by the coreboot image. + +NOTE: The gbe region contains the MAC address so be careful. When updating the flash using + flashrom it is advisable to leave out the *gbe* area. + ## Flashing coreboot ### Internal programming The SPI flash can be accessed using [flashrom]. +The descriptor area needs to be updated once to resize the *bios* region. +`flashrom -p internal --ifd -i fd -w <coreboot.bin>` + +After that only the bios area should to be updated. +`flashrom -p internal --ifd -i bios -w <coreboot.bin>` + +The *gbe* and *me* regions should not be updated. + +NOTE: As `flashrom --ifd` uses the flash descriptor it is required to update the + descriptor and bios regions in the right sequence. Don't update both in one command. + ### External programming The system has an internal flash chip which is a 16 MiB soldered SOIC-8 chip. |