diff options
Diffstat (limited to 'Documentation/mainboard/supermicro')
3 files changed, 110 insertions, 39 deletions
diff --git a/Documentation/mainboard/supermicro/x11-lga1151-series/index.md b/Documentation/mainboard/supermicro/x11-lga1151-series/index.md deleted file mode 100644 index 79d2571009..0000000000 --- a/Documentation/mainboard/supermicro/x11-lga1151-series/index.md +++ /dev/null @@ -1,7 +0,0 @@ -# X11 LGA1151 series - -The supermicros X11 series with socket LGA1151 are mostly the same boards with some minor -differences in internal and external interfaces like available PCIe slots, 1 GbE, 10 GbE, -IPMI etc. This is why those boards are grouped as "X11 LGA1151 series". - -- [X11SSH-TF](x11ssh-tf/x11ssh-tf.md) diff --git a/Documentation/mainboard/supermicro/x11-lga1151-series/x11-lga1151-series.md b/Documentation/mainboard/supermicro/x11-lga1151-series/x11-lga1151-series.md new file mode 100644 index 0000000000..6a613e77d1 --- /dev/null +++ b/Documentation/mainboard/supermicro/x11-lga1151-series/x11-lga1151-series.md @@ -0,0 +1,61 @@ +# X11 LGA1151 series + +The [Supermicro X11 LGA1151 series] are mostly the same boards with some minor differences in +internal and external interfaces like available PCIe slots, NICs (1 GbE, 10 GbE), IPMI, RAID +Controller etc. + +## Supported boards + +- [X11SSH-TF](x11ssh-tf/x11ssh-tf.md) + +## Required proprietary blobs + +- [Intel FSP2.0] +- Intel ME + +## De-blobbing + +- [Intel FSP2.0] can not be removed as long as there is no free replacement +- Intel ME can be cleaned using me_cleaner (~4.5 MB more free space) +- Intel Ethernet Controller Firmware can be removed when it's extended functionality is not + needed. For more details refer to the respective datasheet (e.g 333016-008 for I210). +- Boards with [AST2400] BMC/IPMI: Firmware can be replaced by [OpenBMC] + +## Flashing coreboot + +Look at the [flashing tutorial] and the board-specific section. + +## Known issues + +These issues apply to all boards. Have a look at the board-specific issues, too. + +- Intel SGX causes secondary APs to crash (disabled for now) when HT is enabled (Fix is WIP CB:35312) +- TianoCore doesn't work with Aspeed NGI, as it's text mode only (Fix is WIP CB:35726) + +## ToDo + +- Fix issues above +- Fix issues in board specific sections +- Fix TODOs mentioned in code +- Add more boards! :-) + +## Technology + +```eval_rst ++------------------+--------------------------------------------------+ +| CPU | Intel Kaby Lake | ++------------------+--------------------------------------------------+ +| PCH | Intel C232/C236 | ++------------------+--------------------------------------------------+ +| Coprocessor | Intel SPS (server version of the ME) | ++------------------+--------------------------------------------------+ +``` + +## Extra links + +[Supermicro X11 LGA1151 series]: https://www.supermicro.com/products/motherboard/Xeon3000/#1151 +[OpenBMC]: https://www.openbmc.org/ +[flashrom]: https://flashrom.org/Flashrom +[flashing tutorial]: ../../../../flash_tutorial/ext_power.md +[Intel FSP2.0]: ../../../../soc/intel/fsp/index.md +[AST2400]: https://www.aspeedtech.com/products.php?fPath=20&rId=376 diff --git a/Documentation/mainboard/supermicro/x11-lga1151-series/x11ssh-tf/x11ssh-tf.md b/Documentation/mainboard/supermicro/x11-lga1151-series/x11ssh-tf/x11ssh-tf.md index 79e7f3e5eb..1caa34b3f7 100644 --- a/Documentation/mainboard/supermicro/x11-lga1151-series/x11ssh-tf/x11ssh-tf.md +++ b/Documentation/mainboard/supermicro/x11-lga1151-series/x11ssh-tf/x11ssh-tf.md @@ -2,46 +2,40 @@ This section details how to run coreboot on the [Supermicro X11SSH-TF]. -## Required proprietary blobs - -* [Intel FSP2.0] -* Intel ME - ## Flashing coreboot -The board can be flashed externally using *some* programmers. -The CH341 was found working, while Dediprog won't detect the chip. - -For more details have a look at the [flashing tutorial]. +The board can be flashed externally using *some* programmers. The CH341 was found working, while +Dediprog didn't detect the chip. The flash IC can be found between the two PCIe slots near the southbridge:  ## BMC (IPMI) -This board has an ASPEED [AST2400], which has BMC functionality. The -BMC firmware resides in a 32 MiB SOIC-16 chip in the corner of the -mainboard near the [AST2400]. This chip is an [MX25L25635F]. - -## Known issues - -- Intel SGX causes secondary APs to crash (disabled for now). -- Tianocore doesn't work with Aspeed NGI, as it's text mode only. -- SMBus / I2C does not work (interrupt timeout) +This board has an ASPEED [AST2400], which has BMC/[IPMI] functionality. The BMC firmware resides +in a 32 MiB SOIC-16 chip in the corner of the mainboard near the [AST2400]. This chip is an +[MX25L25635F]. ## Tested and working - USB ports -- M.2 2280 NVMe slot -- 2x 10GB Ethernet -- SATA -- RS232 -- VGA on Aspeed -- Super I/O initialisation +- Ethernet +- SATA ports +- RS232 external - ECC DRAM detection - PCIe slots -- TPM on TPM expansion header +- M.2 2280 NVMe slot - BMC (IPMI) +- VGA on Aspeed +- TPM on TPM expansion header + +## Known issues + +See general issue section. + +## ToDo + +- Fix TODOs mentioned in code ## Technology @@ -51,23 +45,46 @@ mainboard near the [AST2400]. This chip is an [MX25L25635F]. +------------------+--------------------------------------------------+ | PCH | Intel C236 | +------------------+--------------------------------------------------+ +| Coprocessor | Intel SPS (server version of the ME) | ++------------------+--------------------------------------------------+ | Super I/O | ASPEED AST2400 | +------------------+--------------------------------------------------+ -| Coprocessor | Intel SPS (server version of the ME) | +| Ethernet | 2x Intel® X550 10GBase-T Ethernet | +| | 1x dedicated BMC | ++------------------+--------------------------------------------------+ +| PCIe slots | 1x 3.0 x8 | +| | 1x 3.0 x2 (in x4) | +| | 1x 3.0 M.2 2260 x4 (Key M, with S-ATA) | +------------------+--------------------------------------------------+ -| Coprocessor | ASPEED AST2400 | +| USB slots | 2x USB 2.0 (ext) | +| | 2x USB 3.0 (ext) | +| | 1x USB 3.0 (int) | +| | 1x dual USB 3.0 header | +| | 2x dual USB 2.0 header | ++------------------+--------------------------------------------------+ +| SATA slots | 8x SATA III | ++------------------+--------------------------------------------------+ +| Other slots | 1x RS232 (ext) | +| | 1x RS232 header | +| | 1x TPM header | +| | 1x Power SMB header | +| | 6x PWM Fan connector | +| | 2x I-SGPIO | +| | 2x S-ATA DOM Power connector | +| | 1x XDP Port | +| | 1x External BMC I2C Header (for IPMI card) | +| | 1x Chassis Intrusion Header | +------------------+--------------------------------------------------+ ``` ## Extra links +- [Supermicro X11SSH-TF] - [Board manual] -[AST2400]: https://www.aspeedtech.com/products.php?fPath=20&rId=376 +[Supermicro X11SSH-TF]: https://www.supermicro.com/en/products/motherboard/X11SSH-TF [Board manual]: https://www.supermicro.com/manuals/motherboard/C236/MNL-1783.pdf -[flashrom]: https://flashrom.org/Flashrom +[AST2400]: https://www.aspeedtech.com/products.php?fPath=20&rId=376 +[IPMI]: ../../../../drivers/ipmi_kcs.md [MX25L25635F]: https://media.digikey.com/pdf/Data%20Sheets/Macronix/MX25L25635F.pdf [N25Q128A]: https://www.micron.com/~/media/Documents/Products/Data%20Sheet/NOR%20Flash/Serial%20NOR/N25Q/n25q_128mb_3v_65nm.pdf -[flashing tutorial]: ../../../../flash_tutorial/ext_power.md -[Intel FSP2.0]: ../../../../soc/intel/fsp/index.md -[Supermicro X11SSH-TF]: https://www.supermicro.com/en/products/motherboard/X11SSH-TF |