diff options
Diffstat (limited to 'Documentation/Lesson2.md')
| -rw-r--r-- | Documentation/Lesson2.md | 254 |
1 files changed, 254 insertions, 0 deletions
diff --git a/Documentation/Lesson2.md b/Documentation/Lesson2.md new file mode 100644 index 0000000000..55d81881ca --- /dev/null +++ b/Documentation/Lesson2.md @@ -0,0 +1,254 @@ +# coreboot Lesson 2: Submitting a patch to coreboot.org + +## Part 1: Setting up an account at coreboot.org + +If you already have an account, skip to Part 2. + +Otherwise, go to <https://review.coreboot.org> in your preferred web browser. +Select **Register** in the upper right corner. + +Select the appropriate sign-in. For example, if you have a Google account, +select **Google OAuth2** (gerrit-oauth-provider plugin)".**Note:** Your +username for the account will be the username of the account you used to +sign-in with. (ex. your Google username). + +## Part 2a: Set up RSA Private/Public Key + +If you prefer to use an HTTP password instead, skip to Part 2b. + +For the most up-to-date instructions on how to set up SSH keys with Gerrit go to +<https://gerrit-documentation.storage.googleapis.com/Documentation/2.14.2/user-upload.html#configure_ssh)> +and follow the instructions there. Then, skip to Part 3. + +Additonally, that section of the Web site provides explanation on starting +an ssh-agent, which may be particularly helpful for those who anticipate +frequently uploading changes. + +If you instead prefer to have review.coreboot.org specific instructions, +follow the steps below. Note that this particular section may have the +most up-to-date instructions. + +If you do not have an RSA key set up on your account already (as is the case +with a newly created account), follow the instructions below; otherwise, +doing so could overwrite an existing key. + +In the upper right corner, select your name and click on **Settings**. +Select **SSH Public Keys** on the left-hand side. + +In a terminal, run "ssh-keygen" and confirm the default path ".ssh/id_rsa". + +Make a passphrase -- remember this phrase. It will be needed whenever you use +this RSA Public Key. **Note:** You might want to use a short password, or +forego the password altogether as you will be using it very often. + +Open "id_rsa.pub", copy all contents and paste into the textbox under +"Add SSH Public Key" in the https://review.coreboot.org webpage. + +## Part 2b: Setting up an HTTP Password + +Alternatively, instead of using SSH keys, you can use an HTTP password. To do so, +after you select your name and click on **Settings** on the left-hand side, rather +than selecting **SSH Public Keys**, select **HTTP Password**. + +Click **Generate Password**. This should fill the "Password" box with a password. Copy +the password, and add the following to your $HOME/.netrc file: + + machine review.coreboot.org login YourUserNameHere password YourPasswordHere + +where YourUserNameHere is your username, and YourPasswordHere is the password you +just generated. + +## Part 3: Clone coreboot and configure it for submitting patches + +Go to the **Projects** tab in the upper left corner and select **List**. +From the dropdown menu that appears, select "coreboot". + +If you are using SSH keys, select **ssh** from the tabs under "Project coreboot" +and run the command that appears. This should prompt you for your id_rsa passphrase, +if you previously set one. + +If you are using HTTP, instead, select **http** from the tabs under "Project coreboot" +and run the command that appears + +After it finishes cloning, "cd coreboot" will take you into the local +git repository. Run "make gitconfig" to set up the hooks and configurations. +For example, you will be asked to run the following commands to set your +username and email. + + git config --global user.name "Your Name" + git config --global user.email "Your Email" + +## Part 4: Submit a commit + +An easy first commit to make is fixing existing checkpatch errors and warnings +in the source files. To see errors that are already present, build the files in +the repository by running 'make lint' in the coreboot directory. Alternatively, +if you want to run 'make lint' on a specific directory, run: + + for file in $(git ls-files | grep src/amd/quadcore); do \ + util/lint/checkpatch.pl --file $file --terse; done + +where <filepath> is the filepath of the directory (ex. src/cpu/amd/car). + +Any changes made to files under the src directory are made locally, +and can be submitted for review. + +Once you finish making your desired changes, use the command line to stage +and submit your changes. An alternative and potentially easier way to stage +and submit commits is to use git cola, a graphical user interface for git. For +instructions on how to do so, skip to Part 4b. + +## Part 4a: Using the command line to stage and submit a commit + +To use the command line to stage a commit, run + + git add <filename> + +where `filename` is the name of your file. + +To commit the change, run + + git commit -s + +**Note:** The -s adds a signed-off-by line by the commiter. Your commit should be +signed off with your name and email (i.e. **Your Name** **<Your Email>**, based on +what you set with git config earlier). + +Running git commit first checks for any errors and warnings using lint. If +there are any, you must go back and fix them before submitting your commit. +You can do so by making the necessary changes, and then staging your commit again. + +When there are no errors or warnings, your default text editor will open. +This is where you will write your commit message. + +The first line of your commit message is your commit summary. This is a brief +one-line description of what you changed in the files using the template +below: + +<filepath>: Short description +*ex. cpu/amd/pi/00630F01: Fix checkpatch warnings and errors* +**Note:** It is good practice to use present tense in your descriptions +and do not punctuate your summary. + +Then hit Enter. The next paragraph should be a more in-depth explanation of the +changes you've made to the files. Again, it is good practice to use present +tense. +*ex. Fix space prohibited between function name and open parenthesis, +line over 80 characters, unnecessary braces for single statement blocks, +space required before open brace errors and warnings.* + +When you have finished writing your commit message, save and exit the text +editor. You have finished committing your change. If, after submitting your +commit, you wish to make changes to it, running "git commit --amend" allows +you to take back your commit and amend it. + +When you are done with your commit, run 'git push' to push your commit to +coreboot.org. **Note:** To submit as a draft, use +'git push origin HEAD:refs/drafts/master' Submitting as a draft means that +your commit will be on coreboot.org, but is only visible to those you add +as reviewers. + +## Part 4b: Using git cola to stage and submit a commit + +If git cola is not installed on your machine, see +https://git-cola.github.io/downloads.html for download instructions. + +After making some edits to src files, rather than run "git add," run +'git cola' from the command line. You should see all of the files +edited under "Modified". + +In the textbox labeled "Commit summary" provide a brief one-line +description of what you changed in the files according to the template +below: + +<filepath>: Short description +*ex. cpu/amd/pi/00630F01: Fix checkpatch warnings and errors* +**Note:** It is good practice to use present tense in your descriptions +and do not punctuate your short description. + +In the larger text box labeled 'Extended description...' provide a more +in-depth explanation of the changes you've made to the files. Again, it +is good practice to use present tense. +*ex. Fix space prohibited between function name and open parenthesis, +line over 80 characters, unnecessary braces for single statement blocks, +space required before open brace errors and warnings.* + +Then press Enter two times to move the cursor to below your description. +To the left of the text boxes, there is an icon with an downward arrow. +Press the arrow and select "Sign Off." Make sure that you are signing off +with your name and email (i.e. **Your Name** **<Your Email>**, based on what +you set with git config earlier). + +Now, review each of your changes and mark either individual changes or +an entire file as Ready to Commit by marking it as 'Staged'. To do +this, select one file from the 'Modified' list. If you only want to +submit particular changes from each file, then highlight the red and +green lines for your changes, right click and select 'Stage Selected +Lines'. Alternatively, if an entire file is ready to be committed, just +double click on the file under 'Modified' and it will be marked as +Staged. + +Once the descriptions are done and all the edits you would like to +commit have been staged, press 'Commit' on the right of the text +boxes. + +If the commit fails due to persisting errors, a text box will appear +showing the errors. You can correct these errors within 'git cola' by +right-clicking on the file in which the error occurred and selecting +'Launch Diff Tool'. Make necessary corrections, close the Diff Tool and +'Stage' the corrected file again. It might be necessary to refresh +'git cola' in order for the file to be shown under 'Modified' again. +Note: Be sure to add any other changes that haven't already been +explained in the extended description. + +When ready, select 'Commit' again. Once all errors have been satisfied +and the commit succeeds, move to the command line and run 'git push'. +**Note:** To submit as a draft, use 'git push origin HEAD:refs/drafts/master' +Submitting as a draft means that your commit will be on coreboot.org, but is +only visible to those you add as reviewers. + +## Part 5: Getting your commit reviewed + +Your commits can now be seen on review.coreboot.org if you select “My” +and click on “Changes” and can be reviewed by others. Your code will +first be reviewed by build bot (Jenkins), which will either give you a warning +or verify a successful build; if so, your commit will receive a +1. Other +users may also give your commit +1. For a commit to be merged, it needs +to receive a +2.**Note:** A +1 and a +1 does not make a +2. Only certain users +can give a +2. + +## Part 6 (optional): bash-git-prompt + +To help make it easier to understand the state of the git repository +without running 'git status' or 'git log', there is a way to make the +command line show the status of the repository at every point. This +is through bash-git-prompt. + +Instructions for installing this are found at: +https://github.com/magicmonty/bash-git-prompt +**Note:** Feel free to search for different versions of git prompt, +as this one is specific to bash. + +Alternatively, follow the instructions below: +Run the following two commands in the command line: + + cd + git clone https://github.com/magicmonty/bash-git-prompt.git .bash-git-prompt --depth=1 + +**Note:** cd will change your directory to your home directory, so the +git clone commmand will be run there. + +Finally, open the ~/.bashrc file and append the following two lines: + + GIT_PROMPT_ONLY_IN_REPO=1 + source ~/.bash-git-prompt/gitprompt.sh + +Now, whenever you are in a git repository, it will continuously display +its state. + +There also are additional configurations that you can change depending on your +preferences. If you wish to do so, look at the "All configs for .bashrc" section +on https://github.com/magicmonty/bash-git-prompt. Listed in that section are +various lines that you can copy, uncomment and add to your .bashrc file to +change the configurations. Example configurations include avoid fetching remote +status, and supporting versions of Git older than 1.7.10.
\ No newline at end of file |