diff options
Diffstat (limited to 'Documentation/Intel/fsp1_1.html')
| -rw-r--r-- | Documentation/Intel/fsp1_1.html | 79 |
1 files changed, 0 insertions, 79 deletions
diff --git a/Documentation/Intel/fsp1_1.html b/Documentation/Intel/fsp1_1.html deleted file mode 100644 index 94cb6bf8be..0000000000 --- a/Documentation/Intel/fsp1_1.html +++ /dev/null @@ -1,79 +0,0 @@ -<!DOCTYPE html> -<html> - <head> - <title>FSP 1.1</title> - </head> - <body> - -<h1>FSP 1.1</h1> - -<h2>x86 FSP 1.1 Integration</h2> -<p> - Firmware Support Package (FSP) integration requires System-on-a-Chip (SoC) - and board support. The combined steps are listed - <a target="_blank" href="development.html">here</a>. - The development steps for FSP are listed below: -</p> -<ol> - <li><a href="#RequiredFiles">Required Files</a></li> - <li>Add the <a href="#FspBinary">FSP Binary File</a> to the coreboot File System</li> - <li>Enable <a href="#corebootFspDebugging">coreboot/FSP Debugging</a></li> -</ol> - -<p> - FSP Documentation: -</p> -<ul> - <li>Intel® Firmware Support Package External Architecture Specification <a target="_blank" href="http://www.intel.com/content/dam/www/public/us/en/documents/technical-specifications/fsp-architecture-spec-v1-1.pdf">V1.1</a></li> -</ul> - -<hr> -<h2><a name="RequiredFiles">Required Files</a></h2> -<h3><a name="corebootRequiredFiles">coreboot Required Files</a></h3> -<ol> - <li>Create the following directories if they do not already exist: - <ul> - <li>src/vendorcode/intel/fsp/fsp1_1/<Chip Family></li> - <li>3rdparty/blobs/mainboard/<Board Vendor>/<Board Name></li> - </ul> - </li> - <li> - The following files may need to be copied from the FSP build or release into the - directories above if they are not present or are out of date: - <ul> - <li>FspUpdVpd.h: src/vendorcode/intel/fsp/fsp1_1/<Chip Family>/FspUpdVpd.h</li> - <li>FSP.bin: 3rdparty/blobs/mainboard/<Board Vendor>/<Board Name>/fsp.bin</li> - </ul> - </li> -</ol> - - -<hr> -<h2><a name="FspBinary">Add the FSP Binary File to coreboot File System</a></h2> -<p> - Add the FSP binary to the coreboot flash image using the following command: -</p> -<pre><code>util/cbfstool/cbfstool build/coreboot.rom add -t fsp -n fsp.bin -b <base address> -f fsp.bin</code></pre> -<p> - This command relocates the FSP binary to the 4K byte aligned location in CBFS so that the - FSP code for TempRamInit may be executed in place. -</p> - - -<hr> -<h2><a name="corebootFspDebugging">Enable coreboot/FSP Debugging</a></h2> -<p> - Set the following Kconfig values: -</p> -<ul> - <li>CONFIG_DISPLAY_FSP_ENTRY_POINTS - Display the FSP entry points in romstage</li> - <li>CONFIG_DISPLAY_HOBS - Display and verify the hand-off-blocks (HOBs) returned by MemoryInit</li> - <li>CONFIG_DISPLAY_VBT - Display Video BIOS Table (VBT) used for GOP</li> - <li>CONFIG_DISPLAY_UPD_DATA - Display the user specified product data passed to MemoryInit and SiliconInit</li> -</ul> - - -<hr> -<p>Modified: 17 May 2016</p> - </body> -</html> |