diff options
-rw-r--r-- | src/superio/ite/Kconfig | 2 | ||||
-rw-r--r-- | src/superio/ite/Makefile.inc | 1 | ||||
-rw-r--r-- | src/superio/ite/it8673f/Makefile.inc | 22 | ||||
-rw-r--r-- | src/superio/ite/it8673f/chip.h | 32 | ||||
-rw-r--r-- | src/superio/ite/it8673f/early_serial.c | 90 | ||||
-rw-r--r-- | src/superio/ite/it8673f/it8673f.h | 34 | ||||
-rw-r--r-- | src/superio/ite/it8673f/superio.c | 74 |
7 files changed, 0 insertions, 255 deletions
diff --git a/src/superio/ite/Kconfig b/src/superio/ite/Kconfig index a8ce104c41..4c0f927022 100644 --- a/src/superio/ite/Kconfig +++ b/src/superio/ite/Kconfig @@ -22,8 +22,6 @@ config SUPERIO_ITE_IT8661F bool config SUPERIO_ITE_IT8671F bool -config SUPERIO_ITE_IT8673F - bool config SUPERIO_ITE_IT8712F bool config SUPERIO_ITE_IT8716F diff --git a/src/superio/ite/Makefile.inc b/src/superio/ite/Makefile.inc index 28cf81c4da..2b715211d9 100644 --- a/src/superio/ite/Makefile.inc +++ b/src/superio/ite/Makefile.inc @@ -19,7 +19,6 @@ subdirs-y += it8661f subdirs-y += it8671f -subdirs-y += it8673f subdirs-y += it8712f subdirs-y += it8716f subdirs-y += it8718f diff --git a/src/superio/ite/it8673f/Makefile.inc b/src/superio/ite/it8673f/Makefile.inc deleted file mode 100644 index 10c2f7f3ab..0000000000 --- a/src/superio/ite/it8673f/Makefile.inc +++ /dev/null @@ -1,22 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2006 Uwe Hermann <uwe@hermann-uwe.de> -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -ramstage-$(CONFIG_SUPERIO_ITE_IT8673F) += superio.c - diff --git a/src/superio/ite/it8673f/chip.h b/src/superio/ite/it8673f/chip.h deleted file mode 100644 index c5fd8dedee..0000000000 --- a/src/superio/ite/it8673f/chip.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 Uwe Hermann <uwe@hermann-uwe.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef SUPERIO_ITE_IT8673F_CHIP_H -#define SUPERIO_ITE_IT8673F_CHIP_H - -#include <device/device.h> -#include <pc80/keyboard.h> - -struct superio_ite_it8673f_config { - - struct pc_keyboard keyboard; -}; - -#endif diff --git a/src/superio/ite/it8673f/early_serial.c b/src/superio/ite/it8673f/early_serial.c deleted file mode 100644 index 987b5e6135..0000000000 --- a/src/superio/ite/it8673f/early_serial.c +++ /dev/null @@ -1,90 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 Uwe Hermann <uwe@hermann-uwe.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include "it8673f.h" - -/* The base address is 0x3f0, 0x3bd, or 0x370, depending on config bytes. */ -#define SIO_BASE 0x3f0 -#define SIO_INDEX SIO_BASE -#define SIO_DATA (SIO_BASE + 1) - -/* Global configuration registers. */ -#define IT8673F_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */ -#define IT8673F_CONFIG_REG_LDN 0x07 /* Logical Device Number. */ -#define IT8673F_CONFIG_REG_CLOCKSEL 0x23 /* Clock Selection. */ -#define IT8673F_CONFIG_REG_SWSUSP 0x24 /* Software Suspend. */ - -#define IT8673F_CONFIGURATION_PORT 0x0279 /* Write-only. */ - -/* - * Special values used for entering MB PnP mode. The first four bytes of - * each line determine the address port, the last four are data. - */ -static const u8 init_values[] = { - 0x6a, 0xb5, 0xda, 0xed, /**/ 0xf6, 0xfb, 0x7d, 0xbe, - 0xdf, 0x6f, 0x37, 0x1b, /**/ 0x0d, 0x86, 0xc3, 0x61, - 0xb0, 0x58, 0x2c, 0x16, /**/ 0x8b, 0x45, 0xa2, 0xd1, - 0xe8, 0x74, 0x3a, 0x9d, /**/ 0xce, 0xe7, 0x73, 0x39, -}; - -static void it8673f_sio_write(u8 ldn, u8 index, u8 value) -{ - outb(IT8673F_CONFIG_REG_LDN, SIO_BASE); - outb(ldn, SIO_DATA); - outb(index, SIO_BASE); - outb(value, SIO_DATA); -} - -/* Enable the serial port(s). */ -static void it8673f_enable_serial(device_t dev, u16 iobase) -{ - int i; - - /* (1) Enter the configuration state (MB PnP mode). */ - - /* Perform MB PnP setup to put the SIO chip at 0x3f0. */ - /* Base address 0x3f0: 0x86 0x80 0x55 0x55. */ - /* Base address 0x3bd: 0x86 0x80 0x55 0xaa. */ - /* Base address 0x370: 0x86 0x80 0xaa 0x55. */ - outb(0x86, IT8673F_CONFIGURATION_PORT); - outb(0x80, IT8673F_CONFIGURATION_PORT); - outb(0x55, IT8673F_CONFIGURATION_PORT); - outb(0x55, IT8673F_CONFIGURATION_PORT); - - /* Sequentially write the 32 special values. */ - for (i = 0; i < 32; i++) - outb(init_values[i], SIO_BASE); - - /* (2) Modify the data of configuration registers. */ - - /* Enable all devices. */ - it8673f_sio_write(IT8673F_SP1, 0x30, 0x1); /* Serial port 1 */ - it8673f_sio_write(IT8673F_SP2, 0x30, 0x1); /* Serial port 2 */ - - /* Select 24MHz CLKIN (clear bit 0). */ - it8673f_sio_write(0x00, IT8673F_CONFIG_REG_CLOCKSEL, 0x00); - - /* Clear software suspend mode (clear bit 0). */ - it8673f_sio_write(0x00, IT8673F_CONFIG_REG_SWSUSP, 0x00); - - /* (3) Exit the configuration state (MB PnP mode). */ - it8673f_sio_write(0x00, IT8673F_CONFIG_REG_CC, 0x02); -} diff --git a/src/superio/ite/it8673f/it8673f.h b/src/superio/ite/it8673f/it8673f.h deleted file mode 100644 index b683a31806..0000000000 --- a/src/superio/ite/it8673f/it8673f.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 Uwe Hermann <uwe@hermann-uwe.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef SUPERIO_ITE_IT8673F_IT8673F_H -#define SUPERIO_ITE_IT8673F_IT8673F_H - -/* Datasheet: http://www.datasheet4u.com/html/I/T/8/IT8673F_ITE.pdf.html */ - -#define IT8673F_FDC 0x00 /* Floppy */ -#define IT8673F_SP1 0x01 /* Com1 */ -#define IT8673F_SP2 0x02 /* Com2 */ -#define IT8673F_PP 0x03 /* Parallel port */ -#define IT8673F_FAN 0x04 /* Fan controller */ -#define IT8673F_KBCK 0x05 /* PS/2 keyboard */ -#define IT8673F_KBCM 0x06 /* PS/2 mouse */ - -#endif diff --git a/src/superio/ite/it8673f/superio.c b/src/superio/ite/it8673f/superio.c deleted file mode 100644 index baa1ae17b1..0000000000 --- a/src/superio/ite/it8673f/superio.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 Uwe Hermann <uwe@hermann-uwe.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <device/device.h> -#include <device/pnp.h> -#include <pc80/keyboard.h> -#include <stdlib.h> -#include "chip.h" -#include "it8673f.h" - -static void init(device_t dev) -{ - struct superio_ite_it8673f_config *conf = dev->chip_info; - - if (!dev->enabled) - return; - - switch (dev->path.pnp.device) { - case IT8673F_FDC: /* TODO. */ - break; - case IT8673F_PP: /* TODO. */ - break; - case IT8673F_FAN: /* TODO. */ - break; - case IT8673F_KBCK: - pc_keyboard_init(&conf->keyboard); - break; - case IT8673F_KBCM: /* TODO. */ - break; - } -} - -static struct device_operations ops = { - .read_resources = pnp_read_resources, - .set_resources = pnp_set_resources, - .enable_resources = pnp_enable_resources, - .enable = pnp_enable, - .init = init, -}; - -/* TODO: FDC, PP, FAN, KBCM. */ -static struct pnp_info pnp_dev_info[] = { - { &ops, IT8673F_SP1, PNP_IO0 | PNP_IRQ0, {0x07f8, 0}, }, - { &ops, IT8673F_SP2, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0 | PNP_DRQ1, {0x07f8, 0}, }, - { &ops, IT8673F_KBCK, PNP_IO0 | PNP_IO1 | PNP_IRQ0, {0x07f8, 0}, {0x07f8, 4}, }, -}; - -static void enable_dev(struct device *dev) -{ - pnp_enable_devices(dev, &pnp_ops, - ARRAY_SIZE(pnp_dev_info), pnp_dev_info); -} - -struct chip_operations superio_ite_it8673f_ops = { - CHIP_NAME("ITE IT8673F Super I/O") - .enable_dev = enable_dev, -}; |