diff options
| -rw-r--r-- | src/mainboard/google/reef/devicetree.cb | 46 |
1 files changed, 25 insertions, 21 deletions
diff --git a/src/mainboard/google/reef/devicetree.cb b/src/mainboard/google/reef/devicetree.cb index ea3b20f2e2..a877e863bf 100644 --- a/src/mainboard/google/reef/devicetree.cb +++ b/src/mainboard/google/reef/devicetree.cb @@ -6,30 +6,34 @@ chip soc/intel/apollolake register "pcie_rp4_clkreq_pin" = "0" # wifi/bt - # EMMC TX DATA Delay 1# - # 0x0C[14:8] stands for 12*125 = 1500 pSec delay for HS400 - # 0x11[6:0] stands for 17*125 = 2125 pSec delay for SDR104/HS200 - register "emmc_tx_data_cntl1" = "0x0C11" # HS400 required + # EMMC TX DATA Delay 1 + # Refer to EDS-Vol2-22.3. + # [14:8] steps of delay for HS400, each 125ps. + # [6:0] steps of delay for SDR104/HS200, each 125ps. + register "emmc_tx_data_cntl1" = "0x0C16" - # EMMC TX DATA Delay 2# - # 0x00[30:24] stands for 0*125 = no delay for SDR50 - # 0x2B[22:16] stands for 43*125 = 5375 pSec delay for DDR50 - # 0x29[14:8] stands for 41*125 = 5125 pSec delay for SDR25/HS50 - # 0x29[6:0] stands for 41*125 = 5125 pSec delay for SDR12 - register "emmc_tx_data_cntl2" = "0x002B2929" + # EMMC TX DATA Delay 2 + # Refer to EDS-Vol2-22.3. + # [30:24] steps of delay for SDR50, each 125ps. + # [22:16] steps of delay for DDR50, each 125ps. + # [14:8] steps of delay for SDR25/HS50, each 125ps. + # [6:0] steps of delay for SDR12, each 125ps. + register "emmc_tx_data_cntl2" = "0x28162828" - # EMMC RX CMD/DATA Delay 1# - # 0x00[30:24] stands for 0*125 = no delay for SDR50 - # 0x12[22:16] stands for 18*125 = 2250 pSec delay for DDR50 - # 0x57[14:8] stands for 87*125 = 10875 pSec delay for SDR25/HS50 - # 0x3B[6:0] stands for 59*125= 7375 pSec delay for SDR12 - register "emmc_rx_cmd_data_cntl1" = "0x0012573B" + # EMMC RX CMD/DATA Delay 1 + # Refer to EDS-Vol2-22.3. + # [30:24] steps of delay for SDR50, each 125ps. + # [22:16] steps of delay for DDR50, each 125ps. + # [14:8] steps of delay for SDR25/HS50, each 125ps. + # [6:0] steps of delay for SDR12, each 125ps. + register "emmc_rx_cmd_data_cntl1" = "0x00181717" - # EMMC RX CMD/DATA Delay 2# - # 0x01[17:16] stands for Rx Clock before Output Buffer - # 0x00[14:8] stands for 0 delay for Auto Tuning Mode - # 0x1C[6:0] stands for 28*125 = 3500 pSec delay for HS200 - register "emmc_rx_cmd_data_cntl2" = "0x1001C" + # EMMC RX CMD/DATA Delay 2 + # Refer to EDS-Vol2-22.3. + # [17:16] stands for Rx Clock before Output Buffer + # [14:8] steps of delay for Auto Tuning Mode, each 125ps. + # [6:0] steps of delay for HS200, each 125ps. + register "emmc_rx_cmd_data_cntl2" = "0x10008" # Enable DPTF register "dptf_enable" = "1" |