diff options
| -rw-r--r-- | src/mainboard/amd/padmelon/bootblock/bootblock.c | 6 | ||||
| -rw-r--r-- | src/mainboard/amd/padmelon/fan_init.c | 5 |
2 files changed, 3 insertions, 8 deletions
diff --git a/src/mainboard/amd/padmelon/bootblock/bootblock.c b/src/mainboard/amd/padmelon/bootblock/bootblock.c index f1b6822f8b..4b28e208c9 100644 --- a/src/mainboard/amd/padmelon/bootblock/bootblock.c +++ b/src/mainboard/amd/padmelon/bootblock/bootblock.c @@ -13,11 +13,9 @@ /* Enable IO access to port, then enable UART HW control pins */ static void enable_serial(unsigned int base_port, unsigned int io_enable) { - u32 temp; u8 reg; - temp = pci_read_config32(SOC_LPC_DEV, LPC_IO_PORT_DECODE_ENABLE); - temp |= io_enable; - pci_write_config32(SOC_LPC_DEV, LPC_IO_PORT_DECODE_ENABLE, temp); + + pci_or_config32(SOC_LPC_DEV, LPC_IO_PORT_DECODE_ENABLE, io_enable); /* * Remove this section if HW handshake is not needed. This is needed diff --git a/src/mainboard/amd/padmelon/fan_init.c b/src/mainboard/amd/padmelon/fan_init.c index 574ef7fe9b..a2db5eaafc 100644 --- a/src/mainboard/amd/padmelon/fan_init.c +++ b/src/mainboard/amd/padmelon/fan_init.c @@ -72,11 +72,8 @@ struct fintek_fan system_fan = { static void init_fan_control(void *unused) { - u32 temp; /* Open a LPC IO access to 0x0220-0x0227 */ - temp = pci_read_config32(SOC_LPC_DEV, LPC_IO_PORT_DECODE_ENABLE); - temp |= DECODE_ENABLE_SERIAL_PORT2; - pci_write_config32(SOC_LPC_DEV, LPC_IO_PORT_DECODE_ENABLE, temp); + pci_or_config32(SOC_LPC_DEV, LPC_IO_PORT_DECODE_ENABLE, DECODE_ENABLE_SERIAL_PORT2); set_fan(&cpu_fan); set_fan(&system_fan); |