diff options
| -rw-r--r-- | src/drivers/i2c/lm96000/chip.h | 8 | ||||
| -rw-r--r-- | src/drivers/i2c/lm96000/lm96000.c | 11 |
2 files changed, 15 insertions, 4 deletions
diff --git a/src/drivers/i2c/lm96000/chip.h b/src/drivers/i2c/lm96000/chip.h index ab782dbbb5..cbf8601146 100644 --- a/src/drivers/i2c/lm96000/chip.h +++ b/src/drivers/i2c/lm96000/chip.h @@ -93,6 +93,7 @@ struct lm96000_fan_config { }; struct lm96000_temp_zone { + u8 low_temp; /* temperature for min. duty cycle (in °C) */ u8 target_temp; /* temperature for 100% duty cycle (in °C) */ u8 panic_temp; /* temperature for 100% duty cycle on all fans */ @@ -100,9 +101,12 @@ struct lm96000_temp_zone { with. (Datasheet clearly states the opposite, that this is tied to each PWM output so YMMV.) */ enum { - LM96000_LOW_TEMP_OFF = 0, /* turn fan off below low temp. */ - LM96000_LOW_TEMP_MIN = 1, /* keep PWM at mininum duty cycle */ + /* turn fan off below `low_temp - hysteresis` */ + LM96000_LOW_TEMP_OFF = 0, + /* keep PWM at mininum duty cycle */ + LM96000_LOW_TEMP_MIN = 1, } min_off; + u8 hysteresis; }; /* Implements only those parts currently used by coreboot mainboards. */ diff --git a/src/drivers/i2c/lm96000/lm96000.c b/src/drivers/i2c/lm96000/lm96000.c index 4a3c2eba14..7fbb31b4e5 100644 --- a/src/drivers/i2c/lm96000/lm96000.c +++ b/src/drivers/i2c/lm96000/lm96000.c @@ -156,9 +156,9 @@ static void lm96000_configure_temp_zone(struct device *const dev, { 2, 3, 3, 4, 5, 7, 8, 10, 13, 16, 20, 27, 32, 40, 53, 80 }; unsigned int i; - /* find longest range that starts from 25°C */ + /* find longest range that starts from `low_temp` */ for (i = ARRAY_SIZE(temp_range) - 1; i > 0; --i) { - if (temp_range[i] + 25 <= config->target_temp) + if (config->low_temp + temp_range[i] <= config->target_temp) break; } @@ -170,9 +170,16 @@ static void lm96000_configure_temp_zone(struct device *const dev, : 0); lm96000_write(dev, LM96000_ZONE_TEMP_PANIC(zone), config->panic_temp ? config->panic_temp : 100); + lm96000_update(dev, LM96000_ZONE_SMOOTH(zone), + LM96000_ZONE_SMOOTH_MASK(zone), + LM96000_ZONE_SMOOTH_EN(zone) | 0); /* 0: 35s */ lm96000_update(dev, LM96000_FAN_MIN_OFF, LM96000_FAN_MIN(zone), config->min_off ? LM96000_FAN_MIN(zone) : 0); + lm96000_update(dev, LM96000_ZONE_HYSTERESIS(zone), + LM96000_ZONE_HYST_MASK(zone), + config->hysteresis << LM96000_ZONE_HYST_SHIFT(zone) + & LM96000_ZONE_HYST_MASK(zone)); } static void lm96000_init(struct device *const dev) |