diff options
| -rw-r--r-- | src/mainboard/google/volteer/variants/copano/overridetree.cb | 53 |
1 files changed, 53 insertions, 0 deletions
diff --git a/src/mainboard/google/volteer/variants/copano/overridetree.cb b/src/mainboard/google/volteer/variants/copano/overridetree.cb index 7edb3f2db8..7c9064314c 100644 --- a/src/mainboard/google/volteer/variants/copano/overridetree.cb +++ b/src/mainboard/google/volteer/variants/copano/overridetree.cb @@ -45,6 +45,59 @@ chip soc/intel/tigerlake }" device domain 0 on + device ref dptf on + chip drivers/intel/dptf + ## Disable Active Policy + register "policies.active" = "{[0] = {.target=DPTF_NONE}}" + + ## Passive Policy + register "policies.passive" = "{ + [0] = DPTF_PASSIVE(CPU, CPU, 57, 30000), + [1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_1, 45, 10000), + [2] = DPTF_PASSIVE(CHARGER, TEMP_SENSOR_0, 56, 30000), + [3] = DPTF_PASSIVE(CPU, TEMP_SENSOR_2, 54, 10000), + [4] = DPTF_PASSIVE(CPU, TEMP_SENSOR_3, 46, 10000)}" + + ## Critical Policy + register "policies.critical" = "{ + [0] = DPTF_CRITICAL(CPU, 100, SHUTDOWN), + [1] = DPTF_CRITICAL(TEMP_SENSOR_0, 75, SHUTDOWN), + [2] = DPTF_CRITICAL(TEMP_SENSOR_1, 75, SHUTDOWN), + [3] = DPTF_CRITICAL(TEMP_SENSOR_2, 75, SHUTDOWN), + [4] = DPTF_CRITICAL(TEMP_SENSOR_3, 75, SHUTDOWN)}" + + ## Power Limits Control + # 7-9W PL1 in 200mW increments, avg over 28-32s interval + # PL2 is fixed at 40W, avg over 28-32s interval + register "controls.power_limits" = "{ + .pl1 = {.min_power = 7000, + .max_power = 9000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 200,}, + .pl2 = {.min_power = 40000, + .max_power = 40000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 1000,}}" + + ## Charger Performance Control (Control, mA) + register "controls.charger_perf" = "{ + [0] = { 255, 2500 }, + [1] = { 24, 1900 }, + [2] = { 16, 1500 }, + [3] = { 8, 1000 }}" + + ## Fan Performance Control (Percent, Speed, Noise, Power) + register "controls.fan_perf" = "{[0] = {0}}" + + ## Fan options + register "options.fan.fine_grained_control" = "0" + register "options.fan.step_size" = "0" + + device generic 0 on end + end + end device ref i2c0 on chip drivers/i2c/generic register "hid" = ""10EC5682"" |