summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--src/soc/broadcom/cygnus/ddr_init.c8
-rw-r--r--src/soc/dmp/vortex86ex/ide_sd_sata.c8
-rw-r--r--src/soc/dmp/vortex86ex/raminit.c2
-rw-r--r--src/soc/dmp/vortex86ex/southbridge.c78
-rw-r--r--src/soc/mediatek/mt8173/i2c.c2
-rw-r--r--src/soc/mediatek/mt8173/include/soc/dramc_pi_api.h2
-rw-r--r--src/soc/mediatek/mt8173/mt6391.c2
-rw-r--r--src/soc/nvidia/tegra210/include/soc/mtc.h2
-rw-r--r--src/soc/nvidia/tegra210/romstage.c2
9 files changed, 53 insertions, 53 deletions
diff --git a/src/soc/broadcom/cygnus/ddr_init.c b/src/soc/broadcom/cygnus/ddr_init.c
index 5c4c985366..1a5fd86bb0 100644
--- a/src/soc/broadcom/cygnus/ddr_init.c
+++ b/src/soc/broadcom/cygnus/ddr_init.c
@@ -475,7 +475,7 @@ int is_ddr_32bit(void)
{
int ddr32 = 0;
-#if (CONFIG_CYGNUS_SHMOO_REUSE_DDR_32BIT)
+#if IS_ENABLED(CONFIG_CYGNUS_SHMOO_REUSE_DDR_32BIT)
ddr32=1;
#endif /* (CONFIG_CYGNUS_SHMOO_REUSE_DDR_32BIT) */
@@ -966,7 +966,7 @@ static int try_restore_shmoo(void)
reg = (uint32_t *)(*flptr++);
val = (uint32_t *)(*flptr++);
if ( (((uint32_t)reg >= DDR_PHY_WORD_LANE_0_VDL_OVRIDE_BYTE_RD_EN) && ((uint32_t)reg <= (DDR_PHY_WORD_LANE_0_VDL_OVRIDE_BYTE_RD_EN + 0x114)))
-#if (CONFIG_CYGNUS_SHMOO_REUSE_DDR_32BIT || defined(CONFIG_NS_PLUS))
+#if IS_ENABLED(CONFIG_CYGNUS_SHMOO_REUSE_DDR_32BIT) || defined(CONFIG_NS_PLUS)
|| (((uint32_t)reg >= DDR_PHY_WORD_LANE_1_VDL_OVRIDE_BYTE_RD_EN) && ((uint32_t)reg <= (DDR_PHY_WORD_LANE_1_VDL_OVRIDE_BYTE_RD_EN + 0x114)))
#endif
#ifdef CONFIG_IPROC_DDR_ECC
@@ -1068,7 +1068,7 @@ void iproc_save_shmoo_values(void)
*ptr++ = val;
chksum += val;
}
-#if (CONFIG_CYGNUS_SHMOO_REUSE_DDR_32BIT || defined(CONFIG_NS_PLUS))
+#if IS_ENABLED(CONFIG_CYGNUS_SHMOO_REUSE_DDR_32BIT) || defined(CONFIG_NS_PLUS)
if (is_ddr_32bit()) {
for (i=0; i<sizeof(ddr_phy_wl_regs) / sizeof(ddr_phy_wl_regs[0]); i++) {
reg = (uint32_t)DDR_PHY_WORD_LANE_1_VDL_OVRIDE_BYTE_RD_EN + ddr_phy_wl_regs[i];
@@ -1479,7 +1479,7 @@ void ddr_init2(void)
}
}
-#if CONFIG_CYGNUS_DDR_AUTO_SELF_REFRESH_ENABLE
+#if IS_ENABLED(CONFIG_CYGNUS_DDR_AUTO_SELF_REFRESH_ENABLE)
#if (DDR_AUTO_SELF_REFRESH_IDLE_COUNT > 0) & (DDR_AUTO_SELF_REFRESH_IDLE_COUNT <= 0xff)
/* Enable auto self-refresh */
reg32_set_bits((unsigned int *)DDR_DENALI_CTL_57,
diff --git a/src/soc/dmp/vortex86ex/ide_sd_sata.c b/src/soc/dmp/vortex86ex/ide_sd_sata.c
index 936505e436..c60018ab49 100644
--- a/src/soc/dmp/vortex86ex/ide_sd_sata.c
+++ b/src/soc/dmp/vortex86ex/ide_sd_sata.c
@@ -80,20 +80,20 @@ static void init_ide_ata_timing(struct device *dev)
u16 ata_timing_pri, ata_timing_sec;
u32 ata_timing_reg32;
/* Primary channel is SD. */
-#if CONFIG_IDE1_ENABLE
+#if IS_ENABLED(CONFIG_IDE1_ENABLE)
ata_timing_pri = 0x8000;
#else
ata_timing_pri = 0x0000; // Disable this channel.
#endif
/* Secondary channel is SATA. */
-#if CONFIG_IDE2_ENABLE
+#if IS_ENABLED(CONFIG_IDE2_ENABLE)
ata_timing_sec = 0xa30f; // This setting value works well.
#else
ata_timing_sec = 0x0000; // Disable this channel.
#endif
ata_timing_reg32 = (ata_timing_sec << 16) | ata_timing_pri;
pci_write_config32(dev, 0x40, ata_timing_reg32);
-#if CONFIG_IDE_NATIVE_MODE
+#if IS_ENABLED(CONFIG_IDE_NATIVE_MODE)
/* Set both IDE channels to native mode. */
u8 prog_if;
prog_if = pci_read_config8(dev, 0x09);
@@ -110,7 +110,7 @@ static void init_ide_ata_timing(struct device *dev)
static void setup_std_ide_compatible(struct device *dev)
{
-#if CONFIG_IDE_STANDARD_COMPATIBLE
+#if IS_ENABLED(CONFIG_IDE_STANDARD_COMPATIBLE)
// Misc Control Register (MCR) Offset 90h
// bit 0 = Vendor ID Access, bit 1 = Device ID Access.
u8 mcr;
diff --git a/src/soc/dmp/vortex86ex/raminit.c b/src/soc/dmp/vortex86ex/raminit.c
index 1ccdb27e7e..0d4b5b56b3 100644
--- a/src/soc/dmp/vortex86ex/raminit.c
+++ b/src/soc/dmp/vortex86ex/raminit.c
@@ -253,7 +253,7 @@ static u8 detect_ddr3_dram_size(void)
static void print_ddr3_memory_setup(void)
{
-#if CONFIG_DEBUG_RAM_SETUP
+#if IS_ENABLED(CONFIG_DEBUG_RAM_SETUP)
printk(BIOS_DEBUG, "DDR3 Timing Reg 0-3:\n");
printk(BIOS_DEBUG, "NB 6e : ");
print_debug_hex16(pci_read_config16(NB, 0x6e));
diff --git a/src/soc/dmp/vortex86ex/southbridge.c b/src/soc/dmp/vortex86ex/southbridge.c
index 05702d1eb6..451aea67c0 100644
--- a/src/soc/dmp/vortex86ex/southbridge.c
+++ b/src/soc/dmp/vortex86ex/southbridge.c
@@ -207,7 +207,7 @@ static void pci_routing_fixup(struct device *dev)
ext_int_routing |= irq_to_int_routing[CAN_IRQ] << CAN_IRQ_SHIFT;
ext_int_routing |= irq_to_int_routing[HDA_IRQ] << HDA_IRQ_SHIFT;
ext_int_routing |= irq_to_int_routing[USBD_IRQ] << USBD_IRQ_SHIFT;
-#if CONFIG_IDE_NATIVE_MODE
+#if IS_ENABLED(CONFIG_IDE_NATIVE_MODE)
/* IDE in native mode, only uses one IRQ. */
ext_int_routing |= irq_to_int_routing[0] << SIDE_IRQ_SHIFT;
ext_int_routing |= irq_to_int_routing[PIDE_IRQ] << PIDE_IRQ_SHIFT;
@@ -250,21 +250,21 @@ static void vortex_sb_init(struct device *dev)
{
u32 lpt_reg = 0;
-#if CONFIG_LPT_ENABLE
+#if IS_ENABLED(CONFIG_LPT_ENABLE)
int ppmod = 0;
-#if CONFIG_LPT_MODE_BPP
+#if IS_ENABLED(CONFIG_LPT_MODE_BPP)
ppmod = 0;
-#elif CONFIG_LPT_MODE_EPP_19_AND_SPP
+#elif IS_ENABLED(CONFIG_LPT_MODE_EPP_19_AND_SPP)
ppmod = 1;
-#elif CONFIG_LPT_MODE_ECP
+#elif IS_ENABLED(CONFIG_LPT_MODE_ECP)
ppmod = 2;
-#elif CONFIG_LPT_MODE_ECP_AND_EPP_19
+#elif IS_ENABLED(CONFIG_LPT_MODE_ECP_AND_EPP_19)
ppmod = 3;
-#elif CONFIG_LPT_MODE_SPP
+#elif IS_ENABLED(CONFIG_LPT_MODE_SPP)
ppmod = 4;
-#elif CONFIG_LPT_MODE_EPP_17_AND_SPP
+#elif IS_ENABLED(CONFIG_LPT_MODE_EPP_17_AND_SPP)
ppmod = 5;
-#elif CONFIG_LPT_MODE_ECP_AND_EPP_17
+#elif IS_ENABLED(CONFIG_LPT_MODE_ECP_AND_EPP_17)
ppmod = 7;
#else
#error CONFIG_LPT_MODE error.
@@ -303,67 +303,67 @@ static void ex_sb_gpio_init(struct device *dev)
* Bit 31-16 : DBA, GPIO direction base address.
* Bit 15-0 : DPBA, GPIO data port base address.
* */
-#if CONFIG_GPIO_P0_ENABLE
+#if IS_ENABLED(CONFIG_GPIO_P0_ENABLE)
SETUP_GPIO_ADDR(0)
#endif
-#if CONFIG_GPIO_P1_ENABLE
+#if IS_ENABLED(CONFIG_GPIO_P1_ENABLE)
SETUP_GPIO_ADDR(1)
#endif
-#if CONFIG_GPIO_P2_ENABLE
+#if IS_ENABLED(CONFIG_GPIO_P2_ENABLE)
SETUP_GPIO_ADDR(2)
#endif
-#if CONFIG_GPIO_P3_ENABLE
+#if IS_ENABLED(CONFIG_GPIO_P3_ENABLE)
SETUP_GPIO_ADDR(3)
#endif
-#if CONFIG_GPIO_P4_ENABLE
+#if IS_ENABLED(CONFIG_GPIO_P4_ENABLE)
SETUP_GPIO_ADDR(4)
#endif
-#if CONFIG_GPIO_P5_ENABLE
+#if IS_ENABLED(CONFIG_GPIO_P5_ENABLE)
SETUP_GPIO_ADDR(5)
#endif
-#if CONFIG_GPIO_P6_ENABLE
+#if IS_ENABLED(CONFIG_GPIO_P6_ENABLE)
SETUP_GPIO_ADDR(6)
#endif
-#if CONFIG_GPIO_P7_ENABLE
+#if IS_ENABLED(CONFIG_GPIO_P7_ENABLE)
SETUP_GPIO_ADDR(7)
#endif
-#if CONFIG_GPIO_P8_ENABLE
+#if IS_ENABLED(CONFIG_GPIO_P8_ENABLE)
SETUP_GPIO_ADDR(8)
#endif
-#if CONFIG_GPIO_P9_ENABLE
+#if IS_ENABLED(CONFIG_GPIO_P9_ENABLE)
SETUP_GPIO_ADDR(9)
#endif
/* Enable GPIO port 0~9. */
outl(gpio_enable_mask, base);
/* Set GPIO port 0-9 initial dir and data. */
-#if CONFIG_GPIO_P0_ENABLE
+#if IS_ENABLED(CONFIG_GPIO_P0_ENABLE)
INIT_GPIO(0)
#endif
-#if CONFIG_GPIO_P1_ENABLE
+#if IS_ENABLED(CONFIG_GPIO_P1_ENABLE)
INIT_GPIO(1)
#endif
-#if CONFIG_GPIO_P2_ENABLE
+#if IS_ENABLED(CONFIG_GPIO_P2_ENABLE)
INIT_GPIO(2)
#endif
-#if CONFIG_GPIO_P3_ENABLE
+#if IS_ENABLED(CONFIG_GPIO_P3_ENABLE)
INIT_GPIO(3)
#endif
-#if CONFIG_GPIO_P4_ENABLE
+#if IS_ENABLED(CONFIG_GPIO_P4_ENABLE)
INIT_GPIO(4)
#endif
-#if CONFIG_GPIO_P5_ENABLE
+#if IS_ENABLED(CONFIG_GPIO_P5_ENABLE)
INIT_GPIO(5)
#endif
-#if CONFIG_GPIO_P6_ENABLE
+#if IS_ENABLED(CONFIG_GPIO_P6_ENABLE)
INIT_GPIO(6)
#endif
-#if CONFIG_GPIO_P7_ENABLE
+#if IS_ENABLED(CONFIG_GPIO_P7_ENABLE)
INIT_GPIO(7)
#endif
-#if CONFIG_GPIO_P8_ENABLE
+#if IS_ENABLED(CONFIG_GPIO_P8_ENABLE)
INIT_GPIO(8)
#endif
-#if CONFIG_GPIO_P9_ENABLE
+#if IS_ENABLED(CONFIG_GPIO_P9_ENABLE)
INIT_GPIO(9)
#endif
/* Disable GPIO Port Config IO Base Address. */
@@ -391,34 +391,34 @@ static void ex_sb_uart_init(struct device *dev)
/* S/B register 61h - 60h : UART Config IO Base Address */
pci_write_config16(dev, SB_REG_UART_CFG_IO_BASE, base | 1);
/* setup UART */
-#if CONFIG_UART1_ENABLE
+#if IS_ENABLED(CONFIG_UART1_ENABLE)
SETUP_UART(1)
#endif
-#if CONFIG_UART2_ENABLE
+#if IS_ENABLED(CONFIG_UART2_ENABLE)
SETUP_UART(2)
#endif
-#if CONFIG_UART3_ENABLE
+#if IS_ENABLED(CONFIG_UART3_ENABLE)
SETUP_UART(3)
#endif
-#if CONFIG_UART4_ENABLE
+#if IS_ENABLED(CONFIG_UART4_ENABLE)
SETUP_UART(4)
#endif
-#if CONFIG_UART5_ENABLE
+#if IS_ENABLED(CONFIG_UART5_ENABLE)
SETUP_UART(5)
#endif
-#if CONFIG_UART6_ENABLE
+#if IS_ENABLED(CONFIG_UART6_ENABLE)
SETUP_UART(6)
#endif
-#if CONFIG_UART7_ENABLE
+#if IS_ENABLED(CONFIG_UART7_ENABLE)
SETUP_UART(7)
#endif
-#if CONFIG_UART8_ENABLE
+#if IS_ENABLED(CONFIG_UART8_ENABLE)
SETUP_UART(8)
#endif
-#if CONFIG_UART9_ENABLE
+#if IS_ENABLED(CONFIG_UART9_ENABLE)
SETUP_UART(9)
#endif
-#if CONFIG_UART10_ENABLE
+#if IS_ENABLED(CONFIG_UART10_ENABLE)
SETUP_UART(10)
#endif
/* Keep UART Config I/O base address */
diff --git a/src/soc/mediatek/mt8173/i2c.c b/src/soc/mediatek/mt8173/i2c.c
index 6c04ec3dce..f07ffc92ab 100644
--- a/src/soc/mediatek/mt8173/i2c.c
+++ b/src/soc/mediatek/mt8173/i2c.c
@@ -70,7 +70,7 @@ static struct mtk_i2c i2c[7] = {
#define I2CTAG "[I2C][PL] "
-#if CONFIG_DEBUG_I2C
+#if IS_ENABLED(CONFIG_DEBUG_I2C)
#define I2CLOG(fmt, arg...) printk(BIOS_INFO, I2CTAG fmt, ##arg)
#else
#define I2CLOG(fmt, arg...)
diff --git a/src/soc/mediatek/mt8173/include/soc/dramc_pi_api.h b/src/soc/mediatek/mt8173/include/soc/dramc_pi_api.h
index 1411d39f48..8d449f7950 100644
--- a/src/soc/mediatek/mt8173/include/soc/dramc_pi_api.h
+++ b/src/soc/mediatek/mt8173/include/soc/dramc_pi_api.h
@@ -178,7 +178,7 @@ void dramk_check_dq_win(struct dqs_perbit_dly *p, u8 dly_step, u8 last_step, u32
void tx_delay_for_wrleveling(u32 channel, struct dqs_perbit_dly *dqdqs_perbit_dly,
u8 *ave_dqdly_byte, u8 *max_dqsdly_byte);
-#if CONFIG_DEBUG_DRAM
+#if IS_ENABLED(CONFIG_DEBUG_DRAM)
#define dramc_dbg_msg(_x_...) printk(BIOS_DEBUG, _x_)
#else
#define dramc_dbg_msg(_x_...)
diff --git a/src/soc/mediatek/mt8173/mt6391.c b/src/soc/mediatek/mt8173/mt6391.c
index ec7fabc554..9ba3503d6b 100644
--- a/src/soc/mediatek/mt8173/mt6391.c
+++ b/src/soc/mediatek/mt8173/mt6391.c
@@ -21,7 +21,7 @@
#include <soc/pmic_wrap.h>
#include <types.h>
-#if CONFIG_DEBUG_PMIC
+#if IS_ENABLED(CONFIG_DEBUG_PMIC)
#define DEBUG_PMIC(level, x...) printk(level, x)
#else
#define DEBUG_PMIC(level, x...)
diff --git a/src/soc/nvidia/tegra210/include/soc/mtc.h b/src/soc/nvidia/tegra210/include/soc/mtc.h
index fa07f33247..ca369ad3cf 100644
--- a/src/soc/nvidia/tegra210/include/soc/mtc.h
+++ b/src/soc/nvidia/tegra210/include/soc/mtc.h
@@ -18,7 +18,7 @@
#include <boot/coreboot_tables.h>
-#if CONFIG_HAVE_MTC
+#if IS_ENABLED(CONFIG_HAVE_MTC)
int tegra210_run_mtc(void);
void soc_add_mtc(struct lb_header *header);
diff --git a/src/soc/nvidia/tegra210/romstage.c b/src/soc/nvidia/tegra210/romstage.c
index 9491570a0b..7b6444d7f8 100644
--- a/src/soc/nvidia/tegra210/romstage.c
+++ b/src/soc/nvidia/tegra210/romstage.c
@@ -45,7 +45,7 @@ void romstage(void)
printk(BIOS_INFO, "T210: romstage here\n");
-#if CONFIG_BOOTROM_SDRAM_INIT
+#if IS_ENABLED(CONFIG_BOOTROM_SDRAM_INIT)
printk(BIOS_INFO, "T210 romstage: SDRAM init done by BootROM, RAMCODE = %d\n",
sdram_get_ram_code());
#else
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 06:58:49 +0000