diff options
| -rw-r--r-- | src/mainboard/iwill/dk8_htx/cache_as_ram_auto.c | 2 | ||||
| -rw-r--r-- | src/mainboard/iwill/dk8s2/cache_as_ram_auto.c | 2 | ||||
| -rw-r--r-- | src/mainboard/iwill/dk8x/cache_as_ram_auto.c | 2 | ||||
| -rw-r--r-- | src/northbridge/amd/amdk8/coherent_ht_car.c | 1838 |
4 files changed, 3 insertions, 1841 deletions
diff --git a/src/mainboard/iwill/dk8_htx/cache_as_ram_auto.c b/src/mainboard/iwill/dk8_htx/cache_as_ram_auto.c index 733909f6a5..a5cf536786 100644 --- a/src/mainboard/iwill/dk8_htx/cache_as_ram_auto.c +++ b/src/mainboard/iwill/dk8_htx/cache_as_ram_auto.c @@ -108,7 +108,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) } #include "northbridge/amd/amdk8/amdk8.h" -#include "northbridge/amd/amdk8/coherent_ht_car.c" +#include "northbridge/amd/amdk8/coherent_ht.c" #include "northbridge/amd/amdk8/incoherent_ht.c" diff --git a/src/mainboard/iwill/dk8s2/cache_as_ram_auto.c b/src/mainboard/iwill/dk8s2/cache_as_ram_auto.c index a9d66e1ba7..566ad419b4 100644 --- a/src/mainboard/iwill/dk8s2/cache_as_ram_auto.c +++ b/src/mainboard/iwill/dk8s2/cache_as_ram_auto.c @@ -108,7 +108,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) } #include "northbridge/amd/amdk8/amdk8.h" -#include "northbridge/amd/amdk8/coherent_ht_car.c" +#include "northbridge/amd/amdk8/coherent_ht.c" #include "northbridge/amd/amdk8/incoherent_ht.c" diff --git a/src/mainboard/iwill/dk8x/cache_as_ram_auto.c b/src/mainboard/iwill/dk8x/cache_as_ram_auto.c index a9d66e1ba7..566ad419b4 100644 --- a/src/mainboard/iwill/dk8x/cache_as_ram_auto.c +++ b/src/mainboard/iwill/dk8x/cache_as_ram_auto.c @@ -108,7 +108,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) } #include "northbridge/amd/amdk8/amdk8.h" -#include "northbridge/amd/amdk8/coherent_ht_car.c" +#include "northbridge/amd/amdk8/coherent_ht.c" #include "northbridge/amd/amdk8/incoherent_ht.c" diff --git a/src/northbridge/amd/amdk8/coherent_ht_car.c b/src/northbridge/amd/amdk8/coherent_ht_car.c deleted file mode 100644 index 55a2a77bd3..0000000000 --- a/src/northbridge/amd/amdk8/coherent_ht_car.c +++ /dev/null @@ -1,1838 +0,0 @@ -/* coherent hypertransport initialization for AMD64 - * - * written by Stefan Reinauer <stepan@openbios.org> - * (c) 2003-2004 by SuSE Linux AG - * - * (c) 2004 Tyan Computer - * 2004.12 yhlu added support to create routing table dynamically. - * it also support 8 ways too. (8 ways ladder or 8 ways crossbar) - * - * This code is licensed under GPL. - */ - -/* - * This algorithm assumes a grid configuration as follows: - * - * nodes : 1 2 4 6 8 - * org. : 1x1 2x1 2x2 2x3 2x4 - Ladder: - CPU7-------------CPU6 - | | - | | - | | - | | - | | - | | - CPU5-------------CPU4 - | | - | | - | | - | | - | | - | | - CPU3-------------CPU2 - | | - | | - | | - | | - | | - | | - CPU1-------------CPU0 - CROSS_BAR_47_56: - CPU7-------------CPU6 - | \____ ___/ | - | \ / | - | \/ | - | /\ | - | / \ | - | ____/ \___ | - CPU5 CPU4 - | | - | | - | | - | | - | | - | | - CPU3-------------CPU2 - | | - | | - | | - | | - | | - | | - CPU1-------------CPU0 - */ - -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <device/hypertransport_def.h> -#include "arch/romcc_io.h" - -#include "amdk8.h" - -#define enable_bsp_routing() enable_routing(0) - -#define NODE_HT(x) PCI_DEV(0,24+x,0) -#define NODE_MP(x) PCI_DEV(0,24+x,1) -#define NODE_MC(x) PCI_DEV(0,24+x,3) - -#define DEFAULT 0x00010101 /* default row entry */ - -#ifndef CROSS_BAR_47_56 - #define CROSS_BAR_47_56 0 -#endif - -#ifndef TRY_HIGH_FIRST - #define TRY_HIGH_FIRST 0 -#endif - -#ifndef K8_HT_FREQ_1G_SUPPORT - #define K8_HT_FREQ_1G_SUPPORT 0 -#endif - -#ifndef K8_HT_CHECK_PENDING_LINK - #if CONFIG_MAX_PHYSICAL_CPUS >= 4 - #define K8_HT_CHECK_PENDING_LINK 1 - #else - #define K8_HT_CHECK_PENDING_LINK 0 - #endif -#endif - -#ifndef CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED - #define CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED 0 -#endif - -#ifndef ENABLE_APIC_EXT_ID - #define ENABLE_APIC_EXT_ID 0 -#endif - - -static inline void print_linkn (const char *strval, uint8_t byteval) -{ -#if 1 -#if CONFIG_USE_PRINTK_IN_CAR - printk_debug("%s%02x\r\n", strval, byteval); -#else - print_debug(strval); print_debug_hex8(byteval); print_debug("\r\n"); -#endif -#endif -} - -static void disable_probes(void) -{ - /* disable read/write/fill probes for uniprocessor setup - * they don't make sense if only one cpu is available - */ - - /* Hypetransport Transaction Control Register - * F0:0x68 - * [ 0: 0] Disable read byte probe - * 0 = Probes issues - * 1 = Probes not issued - * [ 1: 1] Disable Read Doubleword probe - * 0 = Probes issued - * 1 = Probes not issued - * [ 2: 2] Disable write byte probes - * 0 = Probes issued - * 1 = Probes not issued - * [ 3: 3] Disable Write Doubleword Probes - * 0 = Probes issued - * 1 = Probes not issued. - * [10:10] Disable Fill Probe - * 0 = Probes issued for cache fills - * 1 = Probes not issued for cache fills. - */ - - u32 val; - - print_spew("Disabling read/write/fill probes for UP... "); - - val=pci_read_config32(NODE_HT(0), HT_TRANSACTION_CONTROL); - val |= HTTC_DIS_FILL_P | HTTC_DIS_RMT_MEM_C | HTTC_DIS_P_MEM_C | - HTTC_DIS_MTS | HTTC_DIS_WR_DW_P | HTTC_DIS_WR_B_P | - HTTC_DIS_RD_DW_P | HTTC_DIS_RD_B_P; - pci_write_config32(NODE_HT(0), HT_TRANSACTION_CONTROL, val); - - print_spew("done.\r\n"); - -} - -static void enable_apic_ext_id(u8 node) -{ -#if ENABLE_APIC_EXT_ID==1 -#warning "FIXME Is the right place to enable apic ext id here?" - - u32 val; - - val = pci_read_config32(NODE_HT(node), 0x68); - val |= (HTTC_APIC_EXT_SPUR | HTTC_APIC_EXT_ID | HTTC_APIC_EXT_BRD_CST); - pci_write_config32(NODE_HT(node), 0x68, val); -#endif -} - -static void enable_routing(u8 node) -{ - u32 val; - - /* HT Initialization Control Register - * F0:0x6C - * [ 0: 0] Routing Table Disable - * 0 = Packets are routed according to routing tables - * 1 = Packets are routed according to the default link field - * [ 1: 1] Request Disable (BSP should clear this) - * 0 = Request packets may be generated - * 1 = Request packets may not be generated. - * [ 3: 2] Default Link (Read-only) - * 00 = LDT0 - * 01 = LDT1 - * 10 = LDT2 - * 11 = CPU on same node - * [ 4: 4] Cold Reset - * - Scratch bit cleared by a cold reset - * [ 5: 5] BIOS Reset Detect - * - Scratch bit cleared by a cold reset - * [ 6: 6] INIT Detect - * - Scratch bit cleared by a warm or cold reset not by an INIT - * - */ - - /* Enable routing table */ - print_spew("Enabling routing table for node "); - print_spew_hex8(node); - - val=pci_read_config32(NODE_HT(node), 0x6c); - val &= ~((1<<1)|(1<<0)); - pci_write_config32(NODE_HT(node), 0x6c, val); - - print_spew(" done.\r\n"); -} - -static void fill_row(u8 node, u8 row, u32 value) -{ - pci_write_config32(NODE_HT(node), 0x40+(row<<2), value); -} - -#if CONFIG_MAX_PHYSICAL_CPUS > 1 -static u8 link_to_register(int ldt) -{ - /* - * [ 0: 3] Request Route - * [0] Route to this node - * [1] Route to Link 0 - * [2] Route to Link 1 - * [3] Route to Link 2 - */ - - if (ldt&0x08) return 0x40; - if (ldt&0x04) return 0x20; - if (ldt&0x02) return 0x00; - - /* we should never get here */ - print_spew("Unknown Link\n"); - return 0; -} - -static u32 get_row(u8 node, u8 row) -{ - return pci_read_config32(NODE_HT(node), 0x40+(row<<2)); -} - -static int link_connection(u8 src, u8 dest) -{ - return get_row(src, dest) & 0x0f; -} - -static void rename_temp_node(u8 node) -{ - uint32_t val; - - print_spew("Renaming current temporary node to "); - print_spew_hex8(node); - - val=pci_read_config32(NODE_HT(7), 0x60); - val &= (~7); /* clear low bits. */ - val |= node; /* new node */ - pci_write_config32(NODE_HT(7), 0x60, val); - - print_spew(" done.\r\n"); -} - -static int verify_connection(u8 dest) -{ - /* See if we have a valid connection to dest */ - u32 val; - - /* Verify that the coherent hypertransport link is - * established and actually working by reading the - * remode node's vendor/device id - */ - val = pci_read_config32(NODE_HT(dest),0); - if(val != 0x11001022) - return 0; - - return 1; -} - -static uint16_t read_freq_cap(device_t dev, uint8_t pos) -{ - /* Handle bugs in valid hypertransport frequency reporting */ - uint16_t freq_cap; - uint32_t id; - - freq_cap = pci_read_config16(dev, pos); - freq_cap &= ~(1 << HT_FREQ_VENDOR); /* Ignore Vendor HT frequencies */ - -#if K8_HT_FREQ_1G_SUPPORT == 1 - #if K8_REV_F_SUPPORT == 0 - if (!is_cpu_pre_e0()) - #endif - { - return freq_cap; - } -#endif - - id = pci_read_config32(dev, 0); - - /* AMD K8 Unsupported 1Ghz? */ - if (id == (PCI_VENDOR_ID_AMD | (0x1100 << 16))) { - freq_cap &= ~(1 << HT_FREQ_1000Mhz); - } - - return freq_cap; -} - -static int optimize_connection(device_t node1, uint8_t link1, device_t node2, uint8_t link2) -{ - static const uint8_t link_width_to_pow2[]= { 3, 4, 0, 5, 1, 2, 0, 0 }; - static const uint8_t pow2_to_link_width[] = { 0x7, 4, 5, 0, 1, 3 }; - uint16_t freq_cap1, freq_cap2; - uint8_t width_cap1, width_cap2, width, old_width, ln_width1, ln_width2; - uint8_t freq, old_freq; - int needs_reset; - /* Set link width and frequency */ - - /* Initially assume everything is already optimized and I don't need a reset */ - needs_reset = 0; - - /* Get the frequency capabilities */ - freq_cap1 = read_freq_cap(node1, link1 + PCI_HT_CAP_HOST_FREQ_CAP); - freq_cap2 = read_freq_cap(node2, link2 + PCI_HT_CAP_HOST_FREQ_CAP); - - /* Calculate the highest possible frequency */ - freq = log2(freq_cap1 & freq_cap2); - - /* See if I am changing the link freqency */ - old_freq = pci_read_config8(node1, link1 + PCI_HT_CAP_HOST_FREQ); - old_freq &= 0x0f; - needs_reset |= old_freq != freq; - old_freq = pci_read_config8(node2, link2 + PCI_HT_CAP_HOST_FREQ); - old_freq &= 0x0f; - needs_reset |= old_freq != freq; - - /* Set the Calulcated link frequency */ - pci_write_config8(node1, link1 + PCI_HT_CAP_HOST_FREQ, freq); - pci_write_config8(node2, link2 + PCI_HT_CAP_HOST_FREQ, freq); - - /* Get the width capabilities */ - width_cap1 = pci_read_config8(node1, link1 + PCI_HT_CAP_HOST_WIDTH); - width_cap2 = pci_read_config8(node2, link2 + PCI_HT_CAP_HOST_WIDTH); - - /* Calculate node1's input width */ - ln_width1 = link_width_to_pow2[width_cap1 & 7]; - ln_width2 = link_width_to_pow2[(width_cap2 >> 4) & 7]; - if (ln_width1 > ln_width2) { - ln_width1 = ln_width2; - } - width = pow2_to_link_width[ln_width1]; - /* Calculate node1's output width */ - ln_width1 = link_width_to_pow2[(width_cap1 >> 4) & 7]; - ln_width2 = link_width_to_pow2[width_cap2 & 7]; - if (ln_width1 > ln_width2) { - ln_width1 = ln_width2; - } - width |= pow2_to_link_width[ln_width1] << 4; - - /* See if I am changing node1's width */ - old_width = pci_read_config8(node1, link1 + PCI_HT_CAP_HOST_WIDTH + 1); - old_width &= 0x77; - needs_reset |= old_width != width; - - /* Set node1's widths */ - pci_write_config8(node1, link1 + PCI_HT_CAP_HOST_WIDTH + 1, width); - - // * Calculate node2's width */ - width = ((width & 0x70) >> 4) | ((width & 0x7) << 4); - - /* See if I am changing node2's width */ - old_width = pci_read_config8(node2, link2 + PCI_HT_CAP_HOST_WIDTH + 1); - old_width &= 0x77; - needs_reset |= old_width != width; - - /* Set node2's widths */ - pci_write_config8(node2, link2 + PCI_HT_CAP_HOST_WIDTH + 1, width); - - return needs_reset; -} - -static uint8_t get_linkn_first(uint8_t byte) -{ - if(byte & 0x02) { byte = 0; } - else if(byte & 0x04) { byte = 1; } - else if(byte & 0x08) { byte = 2; } - return byte; -} - -static uint8_t get_linkn_last(uint8_t byte) -{ - if(byte & 0x02) { byte &= 0x0f; byte |= 0x00; } - if(byte & 0x04) { byte &= 0x0f; byte |= 0x10; } - if(byte & 0x08) { byte &= 0x0f; byte |= 0x20; } - return byte>>4; -} - -static uint8_t get_linkn_last_count(uint8_t byte) -{ - byte &= 0x0f; - if(byte & 0x02) { byte &= 0xcf; byte |= 0x00; byte+=0x40; } - if(byte & 0x04) { byte &= 0xcf; byte |= 0x10; byte+=0x40; } - if(byte & 0x08) { byte &= 0xcf; byte |= 0x20; byte+=0x40; } - return byte>>4; -} - -static void setup_row_local(u8 source, u8 row) /* source will be 7 when it is for temp use*/ -{ - uint8_t linkn; - uint32_t val; - val = 1; - for(linkn = 0; linkn<3; linkn++) { - uint8_t regpos; - uint32_t reg; - regpos = 0x98 + 0x20 * linkn; - reg = pci_read_config32(NODE_HT(source), regpos); - if ((reg & 0x17) != 3) continue; /* it is not conherent or not connected*/ - val |= 1<<(linkn+1); - } - val <<= 16; - val |= 0x0101; - fill_row(source,row, val); -} - -static void setup_row_direct_x(u8 temp, u8 source, u8 dest, u8 linkn) -{ - uint32_t val; - uint32_t val_s; - val = 1<<(linkn+1); - val |= 1<<(linkn+1+8); /*for direct connect response route should equal to request table*/ - - if(((source &1)!=(dest &1)) -#if CROSS_BAR_47_56 - && ( (source<4)||(source>5) ) //(6,7) (7,6) should still be here - //(6,5) (7,4) should be here -#endif - ){ - val |= (1<<16); - } else { - /*for CROSS_BAR_47_56 47, 56, should be here too - and for 47, 56, 57, 75, 46, 64 we need to substract another link to - 6, 7, 6, 6, 7, 7 - */ - val_s = get_row(temp, source); - val |= ((val_s>>16) - (1<<(linkn+1)))<<16; - } - - fill_row(temp,dest, val ); -} - -#if CROSS_BAR_47_56 -static void opt_broadcast_rt(u8 source, u8 dest, u8 kickout) { - uint32_t val; - val = get_row(source, dest); - val -= link_connection(source, kickout)<<16; - fill_row(source, dest, val); -} - -static void opt_broadcast_rt_group(const u8 *conn, int num) { - int i; - - for(i=0; i<num; i+=3) { - opt_broadcast_rt(conn[i], conn[i+1],conn[i+2]); - } -} -static void opt_broadcast_rt_plus(u8 source, u8 dest, u8 kickout) { - uint32_t val; - val = get_row(source, dest); - val += link_connection(source, kickout)<<16; - fill_row(source, dest, val); -} - -static void opt_broadcast_rt_plus_group(const u8 *conn, int num) { - int i; - - for(i=0; i<num; i+=3) { - opt_broadcast_rt_plus(conn[i], conn[i+1],conn[i+2]); - } -} -#endif - -static void setup_row_direct(u8 source, u8 dest, u8 linkn){ - setup_row_direct_x(source, source, dest, linkn); -} - -static void setup_remote_row_direct(u8 source, u8 dest, u8 linkn){ - setup_row_direct_x(7, source, dest, linkn); -} - -static void setup_temp_row(u8 source, u8 dest) -{ - /* copy val from (source, dest) to (source,7) */ - fill_row(source,7,get_row(source,dest)); -} - -static void clear_temp_row(u8 source) -{ - fill_row(source, 7, DEFAULT); -} - -static void setup_remote_node(u8 node) -{ - static const uint8_t pci_reg[] = { - 0x44, 0x4c, 0x54, 0x5c, 0x64, 0x6c, 0x74, 0x7c, - 0x40, 0x48, 0x50, 0x58, 0x60, 0x68, 0x70, 0x78, - 0x84, 0x8c, 0x94, 0x9c, 0xa4, 0xac, 0xb4, 0xbc, - 0x80, 0x88, 0x90, 0x98, 0xa0, 0xa8, 0xb0, 0xb8, - 0xc4, 0xcc, 0xd4, 0xdc, - 0xc0, 0xc8, 0xd0, 0xd8, - 0xe0, 0xe4, 0xe8, 0xec, - }; - int i; - - print_spew("setup_remote_node: "); - - /* copy the default resource map from node 0 */ - for(i = 0; i < sizeof(pci_reg)/sizeof(pci_reg[0]); i++) { - uint32_t value; - uint8_t reg; - reg = pci_reg[i]; - value = pci_read_config32(NODE_MP(0), reg); - pci_write_config32(NODE_MP(7), reg, value); - - } - print_spew("done\r\n"); -} - -#endif /* CONFIG_MAX_PHYSICAL_CPUS > 1*/ - - -#if CONFIG_MAX_PHYSICAL_CPUS > 2 -#if !CROSS_BAR_47_56 -static void setup_row_indirect_x(u8 temp, u8 source, u8 dest) -#else -static void setup_row_indirect_x(u8 temp, u8 source, u8 dest, u8 gateway, u8 diff) -#endif -{ - /*for indirect connection, we need to compute the val from val_s(source, source), and val_g(source, gateway) */ - uint32_t val_s; - uint32_t val; -#if !CROSS_BAR_47_56 - u8 gateway; - u8 diff; - if(source<dest) { - gateway = source + 2; - } else { - gateway = source - 2; - } -#endif - val_s = get_row(temp, source); - val = get_row(temp, gateway); - - val &= 0xffff; - val_s >>= 16; - val_s &= 0xfe; - -#if !CROSS_BAR_47_56 - diff = ((source&1)!=(dest &1)); -#endif - - if(diff && (val_s!=(val&0xff)) ) { /* use another connect as response*/ - val_s -= val & 0xff; -#if (CONFIG_MAX_PHYSICAL_CPUS > 4) || (CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED == 1) - uint8_t byte; - /* Some node have two links left - * don't worry we only have (2, (3 as source need to handle - */ - byte = val_s; - byte = get_linkn_last_count(byte); - if((byte>>2)>1) { /* make sure not the corner*/ - if(source<dest) { - val_s-=link_connection(temp, source-2); /* -down*/ - } else { -#if CROSS_BAR_47_56 - #if 0 - if(source==7) { - val_s-=link_connection(temp, 6); // for 7,2 via 5 - } else if (source==6){ - val_s-=link_connection(temp, 7); // for 6,3 via 4 - } else - #endif - if (source < gateway) { // for 5, 4 via 7 - val_s-=link_connection(temp, source-2); - } else -#endif - val_s-=link_connection(temp, source+2); /* -up*/ - } - } -#endif - val &= 0xff; - val |= (val_s<<8); - } - - if(diff) { /* cross rung?*/ - val |= (1<<16); - } - else { - val_s = get_row(temp, source); - val |= ((val_s>>16) - link_connection(temp, gateway))<<16; - } - - fill_row(temp, dest, val); - -} - -#if !CROSS_BAR_47_56 -static void setup_row_indirect(u8 source, u8 dest) -{ - setup_row_indirect_x(source, source, dest); -} -#else -static void setup_row_indirect(u8 source, u8 dest, u8 gateway, u8 diff) -{ - setup_row_indirect_x(source, source, dest, gateway, diff); -} -#endif - -static void setup_row_indirect_group(const u8 *conn, int num) -{ - int i; - -#if !CROSS_BAR_47_56 - for(i=0; i<num; i+=2) { - setup_row_indirect(conn[i], conn[i+1]); -#else - for(i=0; i<num; i+=4) { - setup_row_indirect(conn[i], conn[i+1],conn[i+2], conn[i+3]); -#endif - - } -} - -#if !CROSS_BAR_47_56 -static void setup_remote_row_indirect(u8 source, u8 dest) -{ - setup_row_indirect_x(7, source, dest); -} -#else -static void setup_remote_row_indirect(u8 source, u8 dest, u8 gateway, u8 diff) -{ - setup_row_indirect_x(7, source, dest, gateway, diff); -} -#endif - -static void setup_remote_row_indirect_group(const u8 *conn, int num) -{ - int i; - -#if !CROSS_BAR_47_56 - for(i=0; i<num; i+=2) { - setup_remote_row_indirect(conn[i], conn[i+1]); -#else - for(i=0; i<num; i+=4) { - setup_remote_row_indirect(conn[i], conn[i+1],conn[i+2], conn[i+3]); -#endif - } -} - -#endif /*CONFIG_MAX_PHYSICAL_CPUS > 2*/ - - -static void setup_uniprocessor(void) -{ - print_spew("Enabling UP settings\r\n"); -#if CONFIG_LOGICAL_CPUS==1 - unsigned tmp = (pci_read_config32(NODE_MC(0), 0xe8) >> 12) & 3; - if (tmp>0) return; -#endif - disable_probes(); -} - -#if CONFIG_MAX_PHYSICAL_CPUS > 2 -static int optimize_connection_group(const u8 *opt_conn, int num) { - int needs_reset = 0; - int i; - for(i=0; i<num; i+=2) { - needs_reset = optimize_connection( - NODE_HT(opt_conn[i]), 0x80 + link_to_register(link_connection(opt_conn[i],opt_conn[i+1])), - NODE_HT(opt_conn[i+1]), 0x80 + link_to_register(link_connection(opt_conn[i+1],opt_conn[i])) ); - } - return needs_reset; -} -#endif - -#if CONFIG_MAX_PHYSICAL_CPUS > 1 -static unsigned setup_smp2(void) -{ - unsigned nodes; - u8 byte; - uint32_t val; - nodes = 2; - - setup_row_local(0, 0); /* it will update the broadcast RT*/ - - val = get_row(0,0); - byte = (val>>16) & 0xfe; - if(byte<0x2) { /* no coherent connection so get out.*/ - nodes = 1; - return nodes; - } - - /* Setup and check a temporary connection to node 1 */ -#if TRY_HIGH_FIRST == 1 - byte = get_linkn_last(byte); /* Max Link to node1 */ -#else - byte = get_linkn_first(byte); /*Min Link to node1 --- according to AMD*/ -#endif - print_linkn("(0,1) link=", byte); - setup_row_direct(0,1, byte); - setup_temp_row(0, 1); - - verify_connection(7); - - /* We found 2 nodes so far */ - val = pci_read_config32(NODE_HT(7), 0x6c); - byte = (val>>2) & 0x3; /*get default link on node7 to node0*/ - print_linkn("(1,0) link=", byte); - setup_row_local(7,1); - setup_remote_row_direct(1, 0, byte); - -#if (CONFIG_MAX_PHYSICAL_CPUS > 4) || (CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED == 1) - val = get_row(7,1); - byte = (val>>16) & 0xfe; - byte = get_linkn_last_count(byte); - if((byte>>2)==3) { /* Oh! we need to treat it as node2. So use another link*/ - val = get_row(0,0); - byte = (val>>16) & 0xfe; -#if TRY_HIGH_FIRST == 1 - byte = get_linkn_first(byte); /* Min link to Node1 */ -#else - byte = get_linkn_last(byte); /* Max link to Node1*/ -#endif - print_linkn("\t-->(0,1) link=", byte); - setup_row_direct(0,1, byte); - setup_temp_row(0, 1); - - verify_connection(7); - - /* We found 2 nodes so far */ - val = pci_read_config32(NODE_HT(7), 0x6c); - byte = (val>>2) & 0x3; /* get default link on node7 to node0*/ - print_linkn("\t-->(1,0) link=", byte); - setup_row_local(7,1); - setup_remote_row_direct(1, 0, byte); - } -#endif - - setup_remote_node(1); /* Setup the regs on the remote node */ - rename_temp_node(1); /* Rename Node 7 to Node 1 */ - enable_routing(1); /* Enable routing on Node 1 */ -#if 0 - /*don't need and it is done by clear_dead_links */ - clear_temp_row(0); -#endif - - return nodes; -} -#endif /*CONFIG_MAX_PHYSICAL_CPUS > 1 */ - -#if CONFIG_MAX_PHYSICAL_CPUS > 2 - -static unsigned setup_smp4(void) -{ - unsigned nodes; - u8 byte; - uint32_t val; - - nodes=4; - - /* Setup and check temporary connection from Node 0 to Node 2 */ - val = get_row(0,0); - byte = ((val>>16) & 0xfe) - link_connection(0,1); - byte = get_linkn_last_count(byte); - - if((byte>>2)==0) { /* We should have two coherent for 4p and above*/ - nodes = 2; - return nodes; - } - - byte &= 3; /* bit [3,2] is count-1*/ - print_linkn("(0,2) link=", byte); - setup_row_direct(0, 2, byte); /*(0,2) direct link done*/ - - /* We found 3 nodes so far. Now setup a temporary - * connection from node 0 to node 3 via node 1 - */ - setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */ - /* here should setup_row_direct(1,3) at first, before that we should find the link in node 1 to 3*/ - val = get_row(1,1); - byte = ((val>>16) & 0xfe) - link_connection(1,0); - byte = get_linkn_first(byte); - print_linkn("(1,3) link=", byte); - setup_row_direct(1,3,byte); /* (1, 3) direct link done*/ - - /* We found 4 nodes so far. Now setup all nodes for 4p */ - // We need to make sure 0,2 and 1,3 link is set already -#if !CROSS_BAR_47_56 - static const u8 conn4_1[] = { - 0,3, - 1,2, - }; -#else - static const u8 conn4_1[] = { - 0,3,2,1, - 1,2,3,1, - }; -#endif - - setup_row_indirect_group(conn4_1, sizeof(conn4_1)/sizeof(conn4_1[0])); - - setup_temp_row(0,2); - verify_connection(7); - val = pci_read_config32(NODE_HT(7), 0x6c); - byte = (val>>2) & 0x3; /* get default link on 7 to 0*/ - print_linkn("(2,0) link=", byte); - - setup_row_local(7,2); - setup_remote_row_direct(2, 0, byte); /* node 2 to node 0 direct link done */ - setup_remote_node(2); /* Setup the regs on the remote node */ - - rename_temp_node(2); /* Rename Node 7 to Node 2 */ - enable_routing(2); /* Enable routing on Node 2 */ - - setup_temp_row(0,1); - setup_temp_row(1,3); - verify_connection(7); - - val = pci_read_config32(NODE_HT(7), 0x6c); - byte = (val>>2) & 0x3; /* get default link on 7 to 1*/ - print_linkn("(3,1) link=", byte); - - setup_row_local(7,3); - setup_remote_row_direct(3, 1, byte); /* node 3 to node 1 direct link done */ - setup_remote_node(3); /* Setup the regs on the remote node */ - - /* We need to init link between 2, and 3 direct link */ - val = get_row(2,2); - byte = ((val>>16) & 0xfe) - link_connection(2,0); - byte = get_linkn_last_count(byte); - print_linkn("(2,3) link=", byte & 3); - - setup_row_direct(2,3, byte & 0x3); - setup_temp_row(0,2); - setup_temp_row(2,3); - verify_connection(7); /* to 3*/ - -#if (CONFIG_MAX_PHYSICAL_CPUS > 4) || (CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED == 1) - /* We need to find out which link is to node3 */ - if((byte>>2)==2) { /* one to node3, one to node0, one to node4*/ - val = get_row(7,3); - if((val>>16) == 1) { /* that link is to node4, because via node1 it has been set, recompute it*/ - val = get_row(2,2); - byte = ((val>>16) & 0xfe) - link_connection(2,0); - byte = get_linkn_first(byte); - print_linkn("\t-->(2,3) link=", byte); - setup_row_direct(2,3,byte); - setup_temp_row(2,3); - verify_connection(7); /* to 3*/ - } - } -#endif - - val = pci_read_config32(NODE_HT(7), 0x6c); - byte = (val>>2) & 0x3; /* get default link on 7 to 2*/ - print_linkn("(3,2) link=", byte); - setup_remote_row_direct(3,2, byte); - -#if (CONFIG_MAX_PHYSICAL_CPUS > 4) || (CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED == 1) - /* set link from 3 to 5 before enable it*/ - val = get_row(7,3); - byte = ((val>>16) & 0xfe) - link_connection(7,2) - link_connection(7,1); - byte = get_linkn_last_count(byte); - if((byte>>2)==1) { /* We should have three coherent links on node 3 for 6p and above*/ - byte &= 3; /*bit [3,2] is count-2*/ - print_linkn("(3,5) link=", byte); - setup_remote_row_direct(3, 5, byte); - } - - val = get_row(2,2); - byte = ((val>>16) & 0xfe) - link_connection(2,3) - link_connection(2,0); - byte = get_linkn_last_count(byte); - - if((byte>>2)==1) { /* We should have three coherent link on node 2 for 6p and above*/ - byte &= 3; /* bit [3,2] is count-2*/ - print_linkn("(2,4) link=", byte); - setup_row_direct(2, 4, byte); - } -#endif - - //Beside 3, 1 is set, We need to make sure 3, 5 is set already in case has three link in 3 -#if !CROSS_BAR_47_56 - static const u8 conn4_3[] = { - 3,0, - }; -#else - static const u8 conn4_3[] = { - 3,0,1,1, - }; -#endif - setup_remote_row_indirect_group(conn4_3, sizeof(conn4_3)/sizeof(conn4_3[0])); - -/* ready to enable RT for Node 3 */ - rename_temp_node(3); - enable_routing(3); /* enable routing on node 3 (temp.) */ - - // beside 2, 0 is set, We need to make sure 2, 4 link is set already in case has three link in 2 -#if !CROSS_BAR_47_56 - static const u8 conn4_2[] = { - 2,1, - }; -#else - static const u8 conn4_2[] = { - 2,1,0,1, - }; -#endif - setup_row_indirect_group(conn4_2, sizeof(conn4_2)/sizeof(conn4_2[0])); - -#if 0 - /*We need to do sth to reverse work for setup_temp_row (0,1) (1,3) */ - /* it will be done by clear_dead_links */ - clear_temp_row(0); - clear_temp_row(1); -#endif - - return nodes; - -} - -#endif /* CONFIG_MAX_PHYSICAL_CPUS > 2 */ - -#if CONFIG_MAX_PHYSICAL_CPUS > 4 - -static unsigned setup_smp6(void) -{ - unsigned nodes; - u8 byte; - uint32_t val; - - nodes=6; - - /* Setup and check temporary connection from Node 0 to Node 4 through 2*/ - val = get_row(2,2); - byte = ((val>>16) & 0xfe) - link_connection(2,3) - link_connection(2,0); - byte = get_linkn_last_count(byte); - - if((byte>>2)==0) { /* We should have three coherent link on node 2 for 6p and above*/ - nodes = 4; - return nodes; - } - - /* Setup and check temporary connection from Node 0 to Node 5 through 1, 3*/ - /* set link from 3 to 5 before enable it*/ - val = get_row(3,3); - byte = ((val>>16) & 0xfe) - link_connection(3,2) - link_connection(3,1); - byte = get_linkn_last_count(byte); - if((byte>>2)==0) { /* We should have three coherent links on node 3 for 6p and above*/ - nodes = 4; - return nodes; - } - - /* We found 6 nodes so far. Now setup all nodes for 6p */ -#warning "FIXME we need to find out the correct gateway for 6p" - static const u8 conn6_1[] = { -#if !CROSS_BAR_47_56 - 0, 4, - 0, 5, - 1, 4, - 1, 5, - 2, 5, - 3, 4, -#else - 0, 4, 2, 0, - 0, 5, 2, 1, - 1, 4, 3, 1, - 1, 5, 3, 0, - 2, 5, 3, 0, - 3, 4, 2, 0, -#endif - }; - - setup_row_indirect_group(conn6_1, sizeof(conn6_1)/sizeof(conn6_1[0])); - - for(byte=0; byte<4; byte+=2) { - setup_temp_row(byte,byte+2); - } - verify_connection(7); - val = pci_read_config32(NODE_HT(7), 0x6c); - byte = (val>>2) & 0x3; /*get default link on 7 to 2*/ - print_linkn("(4,2) link=", byte); - - setup_row_local(7,4); - setup_remote_row_direct(4, 2, byte); - setup_remote_node(4); /* Setup the regs on the remote node */ - - /* Set indirect connection to 0, to 3 */ - //we only need to set 4,0 here - static const u8 conn6_2[] = { -#if !CROSS_BAR_47_56 - 4, 0, -#else - 4, 0, 2, 0, -#endif - }; - - setup_remote_row_indirect_group(conn6_2, sizeof(conn6_2)/sizeof(conn6_2[0])); - - rename_temp_node(4); - enable_routing(4); - - setup_temp_row(0,1); - for(byte=0; byte<4; byte+=2) { - setup_temp_row(byte+1,byte+3); - } - verify_connection(7); - - val = pci_read_config32(NODE_HT(7), 0x6c); - byte = (val>>2) & 0x3; /* get default link on 7 to 3*/ - print_linkn("(5,3) link=", byte); - setup_row_local(7,5); - setup_remote_row_direct(5, 3, byte); - setup_remote_node(5); /* Setup the regs on the remote node */ - -#if !CROSS_BAR_47_56 - /* We need to init link between 4, and 5 direct link */ - val = get_row(4,4); - byte = ((val>>16) & 0xfe) - link_connection(4,2); - byte = get_linkn_last_count(byte); - print_linkn("(4,5) link=", byte & 3); - - setup_row_direct(4,5, byte & 0x3); - setup_temp_row(0,2); - setup_temp_row(2,4); - setup_temp_row(4,5); - verify_connection(7); /* to 5*/ - -#if CONFIG_MAX_PHYSICAL_CPUS > 6 - /* We need to find out which link is to node5 */ - - if((byte>>2)==2) { /* one to node5, one to node2, one to node6*/ - val = get_row(7,5); - if((val>>16) == 1) { /* that link is to node6, because via node 3 node 5 has been set*/ - val = get_row(4,4); - byte = ((val>>16) & 0xfe) - link_connection(4,2); - byte = get_linkn_first(byte); - print_linkn("\t-->(4,5) link=", byte); - setup_row_direct(4,5,byte); - setup_temp_row(4,5); - verify_connection(7); /* to 5*/ - } - } -#endif - - val = pci_read_config32(NODE_HT(7), 0x6c); - byte = (val>>2) & 0x3; /* get default link on 7 to 4*/ - print_linkn("(5,4) link=", byte); - setup_remote_row_direct(5,4, byte); - - //init 5, 7 here - val = get_row(7,5); - byte = ((val>>16) & 0xfe) - link_connection(7,4) - link_connection(7,3); - byte = get_linkn_last_count(byte); - if((byte>>2)==1) { /* We should have three coherent links on node 5 for 6p and above*/ - byte &= 3; /*bit [3,2] is count-2*/ - print_linkn("(5,7) link=", byte); - setup_remote_row_direct(5, 7, byte); - } - - //init 4,6 here - val = get_row(4,4); - byte = ((val>>16) & 0xfe) - link_connection(4,5) - link_connection(4,2); - byte = get_linkn_last_count(byte); - - if((byte>>2)==1) { /* We should have three coherent link on node 4 for 6p and above*/ - byte &= 3; /* bit [3,2] is count-2*/ - print_linkn("(4,6) link=", byte); - setup_row_direct(4, 6, byte); - } - -#endif - - //We need to set 5,0 here only, We need to set up 5, 7 to make 5,0 - /* Set indirect connection to 0, to 3 for indirect we will use clockwise routing */ - static const u8 conn6_3[] = { -#if !CROSS_BAR_47_56 - 5, 0, -#else - 5, 0, 3, 0, -#endif - }; - - setup_remote_row_indirect_group(conn6_3, sizeof(conn6_3)/sizeof(conn6_3[0])); - -/* ready to enable RT for 5 */ - rename_temp_node(5); - enable_routing(5); /* enable routing on node 5 (temp.) */ - - static const u8 conn6_4[] = { -#if !CROSS_BAR_47_56 - 4, 1, - 4, 3, - - 5, 2, - 5, 1, - -#else - 4, 1, 2, 0, - 4, 3, 2, 0, - 4, 5, 2, 0, - - 5, 2, 3, 0, - 5, 1, 3, 0, - 5, 4, 3, 0, - -#endif - }; - - setup_row_indirect_group(conn6_4, sizeof(conn6_4)/sizeof(conn6_4[0])); - -#if 0 - /* We need to do sth about reverse about setup_temp_row (0,1), (2,4), (1, 3), (3,5) - * It will be done by clear_dead_links - */ - for(byte=0; byte<4; byte++) { - clear_temp_row(byte); - } -#endif - - return nodes; - -} - -#endif /* CONFIG_MAX_PHYSICAL_CPUS > 4 */ - -#if CONFIG_MAX_PHYSICAL_CPUS > 6 - -static unsigned setup_smp8(void) -{ - unsigned nodes; - u8 byte; - uint32_t val; - - nodes=8; - - /* Setup and check temporary connection from Node 0 to Node 6 via 2 and 4 to 7 */ - val = get_row(4,4); -#if CROSS_BAR_47_56 - byte = ((val>>16) & 0xfe) - link_connection(4,2); -#else - byte = ((val>>16) & 0xfe) - link_connection(4,5) - link_connection(4,2); - byte = get_linkn_last_count(byte); /* Max link to 6*/ - if((byte>>2)==0) { /* We should have two or three coherent links on node 4 for 8p*/ - nodes = 6; - return nodes; - } -#endif - -#if CROSS_BAR_47_56 - byte = get_linkn_last_count(byte); /* Max link to 6*/ - if((byte>>2)<2) { /* We should have two or three coherent links on node 4 for 8p*/ - nodes = 6; - return nodes; - } -#if TRY_HIGH_FIRST == 1 - byte = ((val>>16) & 0xfe) - link_connection(4,2); - byte = get_linkn_first(byte); /*Min link to 6*/ -#else - byte &= 3; /* bit [3,2] is count-1 or 2*/ -#endif - print_linkn("(4,6) link=", byte); - setup_row_direct(4, 6, byte); -#endif - -#if !CROSS_BAR_47_56 - /* Setup and check temporary connection from Node 0 to Node 7 through 1, 3, 5*/ - val = get_row(5,5); - byte = ((val>>16) & 0xfe) - link_connection(5,4) - link_connection(5,3); - byte = get_linkn_last_count(byte); - if((byte>>2)==0) { /* We should have three coherent links on node 5 for 6p and above*/ - nodes = 6; - return nodes; - } -#endif - - /* We found 8 nodes so far. Now setup all nodes for 8p */ - static const u8 conn8_1[] = { -#if !CROSS_BAR_47_56 - 0, 6, - /*0, 7,*/ - 1, 6, - /*1, 7,*/ - 2, 6, - /*2, 7,*/ - 3, 6, - /*3, 7,*/ - /*4, 7,*/ - 5, 6, -#else - 0, 6, 2, 0, - /*0, 7, 2, 0,*/ - 1, 6, 3, 0, - /*1, 7, 3, 0,*/ - 2, 6, 4, 0, - /*2, 7, 4, 0,*/ - 3, 6, 5, 1, - /*3, 7, 5, 0,*/ -#endif - }; - - setup_row_indirect_group(conn8_1,sizeof(conn8_1)/sizeof(conn8_1[0])); - - for(byte=0; byte<6; byte+=2) { - setup_temp_row(byte,byte+2); - } - verify_connection(7); - val = pci_read_config32(NODE_HT(7), 0x6c); - byte = (val>>2) & 0x3; /* get default link on 7 to 4*/ - print_linkn("(6,4) link=", byte); - - setup_row_local(7,6); - setup_remote_row_direct(6, 4, byte); - setup_remote_node(6); /* Setup the regs on the remote node */ - /* Set indirect connection to 0, to 3 */ -#warning "FIXME we need to find out the correct gateway for 8p" - static const u8 conn8_2[] = { -#if !CROSS_BAR_47_56 - 6, 0, -#else - 6, 0, 4, 0, -#endif - }; - - setup_remote_row_indirect_group(conn8_2, sizeof(conn8_2)/sizeof(conn8_2[0])); - -#if CROSS_BAR_47_56 - //init 5, 6 here - /* here init 5, 6 */ - /* Setup and check temporary connection from Node 0 to Node 5 through 1, 3, 5*/ - val = get_row(5,5); - byte = ((val>>16) & 0xfe) - link_connection(5,3); -#if TRY_HIGH_FIRST == 1 - byte = get_linkn_first(byte); -#else - byte = get_linkn_last(byte); -#endif - print_linkn("(5,6) link=", byte); - setup_row_direct(5, 6, byte); - - setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */ - for(byte=0; byte<4; byte+=2) { - setup_temp_row(byte+1,byte+3); - } - setup_temp_row(5,6); - - verify_connection(7); - - val = get_row(7,6); // to chect it if it is node6 before renaming - if( (val>>16) == 1) { // it is real node 7 so swap it - /* We need to recompute link to 6 */ - val = get_row(5,5); - byte = ((val>>16) & 0xfe) - link_connection(5,3); -#if TRY_HIGH_FIRST == 1 - byte = get_linkn_first(byte); -#else - byte = get_linkn_last(byte); -#endif - print_linkn("\t-->(5,6) link=", byte); - setup_row_direct(5, 6, byte); -#if 0 - setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */ - for(byte=0; byte<4; byte+=2) { - setup_temp_row(byte+1,byte+3); - } -#endif - setup_temp_row(5,6); - - verify_connection(7); - } - val = pci_read_config32(NODE_HT(7), 0x6c); - byte = (val>>2) & 0x3; /* get default link on 7 to 5*/ - print_linkn("(6,5) link=", byte); - setup_remote_row_direct(6, 5, byte); - /*Till now 56, 65 done */ -#endif - - rename_temp_node(6); - enable_routing(6); - -#if !CROSS_BAR_47_56 - setup_temp_row(0,1); - for(byte=0; byte<6; byte+=2) { - setup_temp_row(byte+1,byte+3); - } - - verify_connection(7); - - val = pci_read_config32(NODE_HT(7), 0x6c); - byte = (val>>2) & 0x3; /* get default link on 7 to 5*/ - print_linkn("(7,5) link=", byte); - setup_row_local(7,7); - setup_remote_row_direct(7, 5, byte); - -#else - val = get_row(4,4); - byte = ((val>>16) & 0xfe) - link_connection(4,2) - link_connection(4,6); - byte = get_linkn_first(byte); - print_linkn("(4,7) link=", byte); - setup_row_direct(4, 7, byte); - - /* Setup and check temporary connection from Node 0 to Node 7 through 2, and 4*/ - for(byte=0; byte<4; byte+=2) { - setup_temp_row(byte,byte+2); - } - - verify_connection(7); - - val = pci_read_config32(NODE_HT(7), 0x6c); - byte = (val>>2) & 0x3; /* get default link on 7 to 4*/ - print_linkn("(7,4) link=", byte); - setup_row_local(7,7); - setup_remote_row_direct(7, 4, byte); - /* till now 4-7, 7-4 done. */ -#endif - setup_remote_node(7); /* Setup the regs on the remote node */ - -#if CROSS_BAR_47_56 - /* here init 5, 7 */ - /* Setup and check temporary connection from Node 0 to Node 5 through 1, 3, 5*/ - val = get_row(5,5); - byte = ((val>>16) & 0xfe) - link_connection(5,3) - link_connection(5,6); - byte = get_linkn_first(byte); - print_linkn("(5,7) link=", byte); - setup_row_direct(5, 7, byte); - - setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */ - for(byte=0; byte<4; byte+=2) { - setup_temp_row(byte+1,byte+3); - } - - verify_connection(7); - - val = pci_read_config32(NODE_HT(7), 0x6c); - byte = (val>>2) & 0x3; /* get default link on 7 to 5*/ - print_linkn("(7,5) link=", byte); - setup_remote_row_direct(7, 5, byte); - /*Till now 57, 75 done */ - -#endif - - /* We need to init link between 6, and 7 direct link */ - val = get_row(6,6); -#if !CROSS_BAR_47_56 - byte = ((val>>16) & 0xfe) - link_connection(6,4); -#else - byte = ((val>>16) & 0xfe) - link_connection(6,4) - link_connection(6,5); -#endif - byte = get_linkn_first(byte); - print_linkn("(6,7) link=", byte); - setup_row_direct(6,7, byte); - - val = get_row(7,7); -#if !CROSS_BAR_47_56 - byte = ((val>>16) & 0xfe) - link_connection(7,5); -#else - byte = ((val>>16) & 0xfe) - link_connection(7,5) - link_connection(7,4); -#endif - byte = get_linkn_first(byte); - print_linkn("(7,6) link=", byte); - setup_row_direct(7,6, byte); - - /* Set indirect connection to 0, to 3 for indirect we will use clockwise routing */ - static const u8 conn8_3[] = { -#if !CROSS_BAR_47_56 - 0, 7, /* restore it*/ - 1, 7, - 2, 7, - 3, 7, - 4, 7, - - 6, 1, - 6, 2, - 6, 3, - 6, 5, - - 7, 0, - 7, 1, - 7, 2, - 7, 3, - 7, 4, -#else - - - 4, 5, 6, 1, - 5, 4, 7, 1, - - 6, 1, 5, 0, // or 4, 1 - 6, 2, 4, 0, - 6, 3, 5, 0, // or 4, 1 - - 7, 0, 4, 0, // or 5, 1 - 7, 1, 5, 0, - 7, 2, 4, 0, // or 5, 1 - 7, 3, 5, 0, - - 0, 7, 2, 0, /* restore it*/ - 1, 7, 3, 0, - 2, 7, 4, 1, - 3, 7, 5, 0, - - 2, 5, 4, 1, /* reset it */ - 3, 4, 5, 1, - - 4, 1, 2, 1, /* reset it */ - 4, 3, 2, 1, - - 5, 2, 3, 1, /* reset it */ - 5, 0, 3, 1, - -#endif - }; - - setup_row_indirect_group(conn8_3, sizeof(conn8_3)/sizeof(conn8_3[0])); - -#if CROSS_BAR_47_56 - /* for 47, 56, 57, 75, 46, 64 we need to substract another link to - 6, 7, 6, 6, 7, 7 */ - static const u8 conn8_4[] = { -//direct - 4, 7, 6, - 5, 6, 7, - 5, 7, 6, - 7, 5, 6, - 4, 6, 7, - 6, 4, 7, - -//in direct - 0, 6, 1, - 0, 7, 1, - - 1, 6, 0, - 1, 7, 0, - - 2, 6, 3, -// 2, 7, 3, + - -// 3, 6, 1, + - 3, 7, 2, - - 6, 0, 7, - 6, 1, 7, // needed for via 5 - 6, 1, 4, // ??? - 6, 2, 7, - 6, 3, 7, // needed for via 5 - 6, 3, 4, //??? - 7, 0, 6, // needed for via 4 - 7, 0, 5, //??? - 7, 1, 6, - 7, 2, 6, // needed for via 4 - 7, 2, 5, //??? - 7, 3, 6, - }; - - opt_broadcast_rt_group(conn8_4, sizeof(conn8_4)/sizeof(conn8_4[0])); - - static const u8 conn8_5[] = { - 2, 7, 0, - - 3, 6, 1, - }; - - opt_broadcast_rt_plus_group(conn8_5, sizeof(conn8_5)/sizeof(conn8_5[0])); -#endif - - - -/* ready to enable RT for Node 7 */ - enable_routing(7); /* enable routing on node 7 (temp.) */ - - return nodes; -} - -#endif /* CONFIG_MAX_PHYSICAL_CPUS > 6 */ - - -#if CONFIG_MAX_PHYSICAL_CPUS > 1 - -static unsigned setup_smp(void) -{ - unsigned nodes; - - print_spew("Enabling SMP settings\r\n"); - - nodes = setup_smp2(); -#if CONFIG_MAX_PHYSICAL_CPUS > 2 - if(nodes == 2) - nodes = setup_smp4(); -#endif - -#if CONFIG_MAX_PHYSICAL_CPUS > 4 - if(nodes == 4) - nodes = setup_smp6(); -#endif - -#if CONFIG_MAX_PHYSICAL_CPUS > 6 - if(nodes == 6) - nodes = setup_smp8(); -#endif - -#if CONFIG_USE_PRINTK_IN_CAR - printk_debug("%02x nodes initialized.\r\n", nodes); -#else - print_debug_hex8(nodes); - print_debug(" nodes initialized.\r\n"); -#endif - - return nodes; -} - -static unsigned verify_mp_capabilities(unsigned nodes) -{ - unsigned node, mask; - - mask = 0x06; /* BigMPCap */ - - for (node=0; node<nodes; node++) { - mask &= pci_read_config32(NODE_MC(node), 0xe8); - } - - switch(mask) { -#if CONFIG_MAX_PHYSICAL_CPUS > 2 - case 0x02: /* MPCap */ - if(nodes > 2) { - print_err("Going back to DP\r\n"); - return 2; - } - break; -#endif - case 0x00: /* Non SMP */ - if(nodes >1 ) { - print_err("Going back to UP\r\n"); - return 1; - } - break; - } - - return nodes; - -} - - -static void clear_dead_routes(unsigned nodes) -{ - int last_row; - int node, row; -#if CONFIG_MAX_PHYSICAL_CPUS == 8 - if(nodes==8) return;/* don't touch (7,7)*/ -#endif - last_row = nodes; - if (nodes == 1) { - last_row = 0; - } - for(node = 7; node >= 0; node--) { - for(row = 7; row >= last_row; row--) { - fill_row(node, row, DEFAULT); - } - } - - /* Update the local row */ - for( node=0; node<nodes; node++) { - uint32_t val = 0; - for(row =0; row<nodes; row++) { - val |= get_row(node, row); - } - fill_row(node, node, (((val & 0xff) | ((val >> 8) & 0xff)) << 16) | 0x0101); - } -} -#endif /* CONFIG_MAX_PHYSICAL_CPUS > 1 */ - -#if CONFIG_LOGICAL_CPUS==1 -static unsigned verify_dualcore(unsigned nodes) -{ - unsigned node, totalcpus, tmp; - - totalcpus = 0; - for (node=0; node<nodes; node++) { - tmp = (pci_read_config32(NODE_MC(node), 0xe8) >> 12) & 3 ; - totalcpus += (tmp + 1); - } - - return totalcpus; - -} -#endif - -static void coherent_ht_finalize(unsigned nodes) -{ - unsigned node; -#if K8_REV_F_SUPPORT == 0 - int rev_a0; -#endif -#if CONFIG_LOGICAL_CPUS==1 - unsigned total_cpus; - - if(read_option(CMOS_VSTART_dual_core, CMOS_VLEN_dual_core, 0) == 0) { /* dual_core */ - total_cpus = verify_dualcore(nodes); - } - else { - total_cpus = nodes; - } -#endif - - /* set up cpu count and node count and enable Limit - * Config Space Range for all available CPUs. - * Also clear non coherent hypertransport bus range - * registers on Hammer A0 revision. - */ - - print_spew("coherent_ht_finalize\r\n"); -#if K8_REV_F_SUPPORT == 0 - rev_a0 = is_cpu_rev_a0(); -#endif - for (node = 0; node < nodes; node++) { - device_t dev; - uint32_t val; - dev = NODE_HT(node); - - /* Set the Total CPU and Node count in the system */ - val = pci_read_config32(dev, 0x60); - val &= (~0x000F0070); -#if CONFIG_LOGICAL_CPUS==1 - val |= ((total_cpus-1)<<16)|((nodes-1)<<4); -#else - val |= ((nodes-1)<<16)|((nodes-1)<<4); -#endif - pci_write_config32(dev, 0x60, val); - - /* Only respond to real cpu pci configuration cycles - * and optimize the HT settings - */ - val=pci_read_config32(dev, HT_TRANSACTION_CONTROL); - val &= ~((HTTC_BUF_REL_PRI_MASK << HTTC_BUF_REL_PRI_SHIFT) | - (HTTC_MED_PRI_BYP_CNT_MASK << HTTC_MED_PRI_BYP_CNT_SHIFT) | - (HTTC_HI_PRI_BYP_CNT_MASK << HTTC_HI_PRI_BYP_CNT_SHIFT)); - val |= HTTC_LIMIT_CLDT_CFG | - (HTTC_BUF_REL_PRI_8 << HTTC_BUF_REL_PRI_SHIFT) | - (3 << HTTC_MED_PRI_BYP_CNT_SHIFT) | - (3 << HTTC_HI_PRI_BYP_CNT_SHIFT); - pci_write_config32(dev, HT_TRANSACTION_CONTROL, val); - -#if K8_REV_F_SUPPORT == 0 - if (rev_a0) { - pci_write_config32(dev, 0x94, 0); - pci_write_config32(dev, 0xb4, 0); - pci_write_config32(dev, 0xd4, 0); - } -#endif - } - - print_spew("done\r\n"); -} - -static int apply_cpu_errata_fixes(unsigned nodes) -{ - unsigned node; - int needs_reset = 0; - for(node = 0; node < nodes; node++) { - device_t dev; - uint32_t cmd; - dev = NODE_MC(node); -#if K8_REV_F_SUPPORT == 0 - if (is_cpu_pre_c0()) { - - /* Errata 66 - * Limit the number of downstream posted requests to 1 - */ - cmd = pci_read_config32(dev, 0x70); - if ((cmd & (3 << 0)) != 2) { - cmd &= ~(3<<0); - cmd |= (2<<0); - pci_write_config32(dev, 0x70, cmd ); - needs_reset = 1; - } - cmd = pci_read_config32(dev, 0x7c); - if ((cmd & (3 << 4)) != 0) { - cmd &= ~(3<<4); - cmd |= (0<<4); - pci_write_config32(dev, 0x7c, cmd ); - needs_reset = 1; - } - /* Clock Power/Timing Low */ - cmd = pci_read_config32(dev, 0xd4); - if (cmd != 0x000D0001) { - cmd = 0x000D0001; - pci_write_config32(dev, 0xd4, cmd); - needs_reset = 1; /* Needed? */ - } - - } - else if (is_cpu_pre_d0()) { // d0 later don't need it - uint32_t cmd_ref; - /* Errata 98 - * Set Clk Ramp Hystersis to 7 - * Clock Power/Timing Low - */ - cmd_ref = 0x04e20707; /* Registered */ - cmd = pci_read_config32(dev, 0xd4); - if(cmd != cmd_ref) { - pci_write_config32(dev, 0xd4, cmd_ref ); - needs_reset = 1; /* Needed? */ - } - } -#endif - } - return needs_reset; -} - -static int optimize_link_read_pointers(unsigned nodes) -{ - unsigned node; - int needs_reset = 0; - for(node = 0; node < nodes; node++) { - device_t f0_dev, f3_dev; - uint32_t cmd_ref, cmd; - int link; - f0_dev = NODE_HT(node); - f3_dev = NODE_MC(node); - cmd_ref = cmd = pci_read_config32(f3_dev, 0xdc); - for(link = 0; link < 3; link++) { - uint32_t link_type; - unsigned reg; - /* This works on an Athlon64 because unimplemented links return 0 */ - reg = 0x98 + (link * 0x20); - link_type = pci_read_config32(f0_dev, reg); - /* Only handle coherent links */ - if ((link_type & (LinkConnected | InitComplete|NonCoherent)) == - (LinkConnected|InitComplete)) - { - cmd &= ~(0xff << (link *8)); - cmd |= 0x25 << (link *8); - } - } - if (cmd != cmd_ref) { - pci_write_config32(f3_dev, 0xdc, cmd); - needs_reset = 1; - } - } - return needs_reset; -} - -static inline unsigned get_nodes(void) -{ - return ((pci_read_config32(PCI_DEV(0, 0x18, 0), 0x60)>>4) & 7) + 1; -} - -static int optimize_link_coherent_ht(void) -{ - int needs_reset = 0; - - unsigned nodes; - - nodes = get_nodes(); - -#if CONFIG_MAX_PHYSICAL_CPUS > 1 - if(nodes>1) { - needs_reset |= optimize_connection( - NODE_HT(0), 0x80 + link_to_register(link_connection(0,1)), - NODE_HT(1), 0x80 + link_to_register(link_connection(1,0)) ); - } - -#if CONFIG_MAX_PHYSICAL_CPUS > 2 - if(nodes>2) { - /* optimize physical connections - by LYH */ - static const u8 opt_conn4[] = { - 0,2, - 1,3, - 2,3, - }; - needs_reset |= optimize_connection_group(opt_conn4, sizeof(opt_conn4)/sizeof(opt_conn4[0])); - } -#endif - -#if CONFIG_MAX_PHYSICAL_CPUS > 4 - if(nodes>4) { - static const uint8_t opt_conn6[] ={ - 2, 4, - 3, 5, - #if !CROSS_BAR_47_56 - 4, 5, - #endif - }; - needs_reset |= optimize_connection_group(opt_conn6, sizeof(opt_conn6)/sizeof(opt_conn6[0])); - } -#endif - -#if CONFIG_MAX_PHYSICAL_CPUS > 6 - if(nodes>6) { - static const uint8_t opt_conn8[] ={ - 4, 6, - #if CROSS_BAR_47_56 - 4, 7, - 5, 6, - #endif - 5, 7, - 6, 7, - }; - needs_reset |= optimize_connection_group(opt_conn8, sizeof(opt_conn8)/sizeof(opt_conn8[0])); - } -#endif - -#endif - - needs_reset |= apply_cpu_errata_fixes(nodes); - needs_reset |= optimize_link_read_pointers(nodes); - - return needs_reset; -} - -#if RAMINIT_SYSINFO == 1 -static void setup_coherent_ht_domain(void) -#else -static int setup_coherent_ht_domain(void) -#endif -{ - unsigned nodes; - nodes = 1; - - enable_bsp_routing(); - -#if CONFIG_MAX_PHYSICAL_CPUS > 1 - nodes = setup_smp(); - nodes = verify_mp_capabilities(nodes); - clear_dead_routes(nodes); -#endif - - if (nodes == 1) { - setup_uniprocessor(); - } - coherent_ht_finalize(nodes); - -#if RAMINIT_SYSINFO == 0 - return optimize_link_coherent_ht(); -#endif -} - |