summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/commonlib/bsd/include/commonlib/bsd/mem_chip_info.h97
-rw-r--r--src/soc/mediatek/common/emi.c3
-rw-r--r--src/soc/mediatek/common/memory.c37
-rw-r--r--src/soc/qualcomm/common/qclib.c16
4 files changed, 118 insertions, 35 deletions
diff --git a/src/commonlib/bsd/include/commonlib/bsd/mem_chip_info.h b/src/commonlib/bsd/include/commonlib/bsd/mem_chip_info.h
index 0d92b52acc..4ab0c6f289 100644
--- a/src/commonlib/bsd/include/commonlib/bsd/mem_chip_info.h
+++ b/src/commonlib/bsd/include/commonlib/bsd/mem_chip_info.h
@@ -13,23 +13,98 @@ enum mem_chip_type {
MEM_CHIP_LPDDR4X = 0x49,
};
+#define MEM_CHIP_STRUCT_VERSION 0 /* Hopefully we'll never have to bump this... */
+
+/*
+ * This structure describes memory topology by channel, rank and DDR chip.
+ *
+ * Definitions:
+ * channel: A DDR channel is an entire set of DDR pins (including DQ, CS, CA, etc.) coming
+ * out of the DDR controller on the SoC. An SoC may support one or more DDR
+ * channels. The DDR chips on different channels are entirely independent from one
+ * another and not aware of each others' existence (concepts like dual-channel
+ * mode / channel-interleaving only exist inside the DDR controller and are not
+ * relevant to this topology description).
+ * chip: A physically distinct DDR part on the mainboard, with a single "channel" worth
+ * of pins (DQ, CS, CA, etc.). Parts that combine multiple "channels" worth of
+ * pins in one package (e.g. separate DQ[0]_A and DQ[0]_B) count as multiple
+ * separate chips in this description.
+ * rank: DDR ranks are independent sub-units within a single physical DDR chip. Each DDR
+ * transaction only communicates with one rank, which is selected through the CS
+ * pins.
+ * MRx: Mode registers, as defined in the various (LP)DDR specs. Mode registers are
+ * read through the DQ and written through the CA pins, and each rank on each chip
+ * has a separate mode register as selected by the CS pins.
+ *
+ * The basic purpose of this structure is to record information read from the mode registers on
+ * all ranks of all chips on all channels, to later allow the recipient of this information to
+ * reconstruct the topology and exact parts used on the board. Since each system may have a
+ * variable number of channels, and the chips on those channels may each have a variable number
+ * of ranks, this would require a doubly-nested structure with variable array sizes in both
+ * dimensions. The size and offset calculations in such a structure would become very cumbersome
+ * and error-prone, so instead this design just stores a one-dimensional array of "entries"
+ * where each entry stores information about one specific rank on one specific channel. This
+ * means that information which is specific to the channel itself is duplicated among all such
+ * entries for all ranks on that channel, and in a well-formed instance of this structure the
+ * values in per-channel fields (`type` and `channel_io_width`) among all entries that have the
+ * same value in the `channel` field MUST be identical.
+ *
+ * The information read from the mode registers should be decoded into normal integer values,
+ * but not otherwise adjusted in any way. For example, if the value read from MR8 on an LPDDR4
+ * chip is 0b00010000, the `density_mbits` field should be set to 8192 (MR8[5:2] = 0b0100
+ * decoded to 8192 Mbits) and the `io_width` field should be set to 16 (MR8[7:6] = 0b00 decoded
+ * to x16.
+ *
+ * Note that on some systems the I/O width (number of DQ pins) of the SoC controller's channel
+ * is a multiple of the I/O width on the DDR chip (which is the reason the two are recorded
+ * separately in this structure). This means that two identical DDR chips are wired in parallel
+ * on the same channel (e.g. one 16-bit part is wired to DQ[0:15] and the other to DQ[16:31]).
+ * All other pins beside DQ are shorted together in this configuration. This means that only the
+ * mode registers of the first chip can be read and recorded in this structure (and all mode
+ * register writes automatically write the same value to all chips through the shorted CA pins).
+ * The other chips are reported "implicitly" via the mismatch in I/O width.
+ *
+ * That means that the total amount of memory in bytes available on the whole system is:
+ *
+ * SUM[over all entries](density_mbits * (channel_io_width/io_width)) * 1024 * 1024 / 8
+ */
struct mem_chip_info {
- uint8_t type; /* enum mem_chip_type */
- uint8_t num_channels;
- uint8_t reserved[6];
- struct mem_chip_channel {
- uint64_t density; /* number in _bytes_, not Megabytes! */
- uint8_t io_width; /* should be `8`, `16`, `32` or `64` */
+ uint8_t num_entries;
+ uint8_t reserved[2]; /* Must be set to 0 */
+ uint8_t struct_version; /* Must always be MEM_CHIP_STRUCT_VERSION */
+ struct mem_chip_entry {
+ uint8_t channel; /* Channel number this entry belongs to */
+ uint8_t rank; /* Rank number within that channel */
+
+ /* per-channel information */
+ uint8_t type; /* enum mem_chip_type */
+ uint8_t channel_io_width; /* I/O width of the channel (no. of DQ pins on SoC) */
+
+ /* per-rank information */
+ uint32_t density_mbits; /* density in megabits, decoded from MR8 */
+ uint8_t io_width; /* I/O width of the DDR chip, decoded from MR8 */
uint8_t manufacturer_id; /* raw value from MR5 */
uint8_t revision_id[2]; /* raw values from MR6 and MR7 */
- uint8_t reserved[4];
- uint8_t serial_id[8]; /* LPDDR5 only, MR47 - MR54 */
- } channel[0];
+ uint8_t serial_id[8]; /* LPDDR5 only (set to 0 otherwise), MR47 - MR54 */
+ } entries[0];
};
-static inline size_t mem_chip_info_size(struct mem_chip_info *info)
+static inline size_t mem_chip_info_size(int entries)
{
- return sizeof(*info) + sizeof(info->channel[0]) * info->num_channels;
+ return sizeof(struct mem_chip_info) + sizeof(struct mem_chip_entry) * entries;
};
+static inline uint64_t mem_chip_info_total_density_bytes(const struct mem_chip_info *info)
+{
+ uint64_t bytes = 0;
+ int i;
+
+ for (i = 0; i < info->num_entries; i++) {
+ const struct mem_chip_entry *e = &info->entries[i];
+ bytes += e->density_mbits * (e->channel_io_width / e->io_width) * (MiB / 8);
+ }
+
+ return bytes;
+}
+
#endif /* _COMMONLIB_BSD_MEM_CHIP_INFO_H_ */
diff --git a/src/soc/mediatek/common/emi.c b/src/soc/mediatek/common/emi.c
index d5470d2fd3..a8163cb14d 100644
--- a/src/soc/mediatek/common/emi.c
+++ b/src/soc/mediatek/common/emi.c
@@ -19,8 +19,7 @@ size_t sdram_size(void)
mc = cbmem_find(CBMEM_ID_MEM_CHIP_INFO);
assert(mc);
- for (unsigned int i = 0; i < mc->num_channels; ++i)
- size += mc->channel[i].density;
+ size = mem_chip_info_total_density_bytes(mc);
printk(BIOS_INFO, "dram size: %#lx\n", size);
return size;
diff --git a/src/soc/mediatek/common/memory.c b/src/soc/mediatek/common/memory.c
index e4207222b0..0a8f58f41f 100644
--- a/src/soc/mediatek/common/memory.c
+++ b/src/soc/mediatek/common/memory.c
@@ -112,20 +112,26 @@ size_t mtk_dram_size(void)
static void fill_dram_info(struct mem_chip_info *mc, const struct ddr_base_info *ddr)
{
- unsigned int i;
- size_t size;
-
- mc->type = MEM_CHIP_LPDDR4X;
- mc->num_channels = CHANNEL_MAX;
- size = mtk_dram_size();
- assert(size);
-
- for (i = 0; i < mc->num_channels; ++i) {
- mc->channel[i].density = size / mc->num_channels;
- mc->channel[i].io_width = DQ_DATA_WIDTH_LP4;
- mc->channel[i].manufacturer_id = ddr->mrr_info.mr5_vendor_id;
- mc->channel[i].revision_id[0] = ddr->mrr_info.mr6_revision_id;
- mc->channel[i].revision_id[1] = ddr->mrr_info.mr7_revision_id;
+ unsigned int c, r;
+
+ mc->num_entries = CHANNEL_MAX * ddr->mrr_info.rank_nums;
+ mc->struct_version = MEM_CHIP_STRUCT_VERSION;
+
+ struct mem_chip_entry *entry = mc->entries;
+ for (c = 0; c < CHANNEL_MAX; c++) {
+ for (r = 0; r < ddr->mrr_info.rank_nums; r++) {
+ entry->channel = c;
+ entry->rank = r;
+ entry->type = MEM_CHIP_LPDDR4X;
+ entry->channel_io_width = DQ_DATA_WIDTH_LP4;
+ entry->density_mbits = ddr->mrr_info.mr8_density[r] / CHANNEL_MAX /
+ (MiB / 8);
+ entry->io_width = DQ_DATA_WIDTH_LP4;
+ entry->manufacturer_id = ddr->mrr_info.mr5_vendor_id;
+ entry->revision_id[0] = ddr->mrr_info.mr6_revision_id;
+ entry->revision_id[1] = ddr->mrr_info.mr7_revision_id;
+ entry++;
+ }
}
}
@@ -140,9 +146,10 @@ static void add_mem_chip_info(int unused)
return;
}
- size = sizeof(*mc) + sizeof(struct mem_chip_channel) * CHANNEL_MAX;
+ size = mem_chip_info_size(CHANNEL_MAX * curr_ddr_info->mrr_info.rank_nums);
mc = cbmem_add(CBMEM_ID_MEM_CHIP_INFO, size);
assert(mc);
+ memset(mc, 0, size);
fill_dram_info(mc, curr_ddr_info);
}
diff --git a/src/soc/qualcomm/common/qclib.c b/src/soc/qualcomm/common/qclib.c
index 4d005e53af..2769dede2f 100644
--- a/src/soc/qualcomm/common/qclib.c
+++ b/src/soc/qualcomm/common/qclib.c
@@ -21,14 +21,15 @@
#define QCLIB_VERSION 0
/* store QcLib return data until CBMEM_CREATION_HOOK runs */
-static void *mem_chip_addr;
+static struct mem_chip_info *mem_chip_info;
static void write_mem_chip_information(struct qclib_cb_if_table_entry *te)
{
+ struct mem_chip_info *info = (void *)te->blob_address;
if (te->size > sizeof(struct mem_chip_info) &&
- te->size == mem_chip_info_size((void *)te->blob_address)) {
- /* Save mem_chip_addr in global variable ahead of hook running */
- mem_chip_addr = (void *)te->blob_address;
+ te->size == mem_chip_info_size(info->num_entries)) {
+ /* Save mem_chip_info in global variable ahead of hook running */
+ mem_chip_info = info;
}
}
@@ -37,19 +38,20 @@ static void add_mem_chip_info(int unused)
void *mem_region_base = NULL;
size_t size;
- if (!mem_chip_addr) {
+ if (!mem_chip_info || !mem_chip_info->num_entries ||
+ mem_chip_info->struct_version != MEM_CHIP_STRUCT_VERSION) {
printk(BIOS_ERR, "Did not receive valid mem_chip_info from QcLib!");
return;
}
- size = mem_chip_info_size(mem_chip_addr);
+ size = mem_chip_info_size(mem_chip_info->num_entries);
/* Add cbmem table */
mem_region_base = cbmem_add(CBMEM_ID_MEM_CHIP_INFO, size);
ASSERT(mem_region_base != NULL);
/* Migrate the data into CBMEM */
- memcpy(mem_region_base, mem_chip_addr, size);
+ memcpy(mem_region_base, mem_chip_info, size);
}
CBMEM_CREATION_HOOK(add_mem_chip_info);