diff options
| -rw-r--r-- | util/superiotool/README | 1 | ||||
| -rw-r--r-- | util/superiotool/fintek.c | 51 |
2 files changed, 50 insertions, 2 deletions
diff --git a/util/superiotool/README b/util/superiotool/README index a7eb3db092..7ff6138e2d 100644 --- a/util/superiotool/README +++ b/util/superiotool/README @@ -114,3 +114,4 @@ Ulf Jordan <jordan@chalmers.se> Urja Rannikko <urjaman@gmail.com> Uwe Hermann <uwe@hermann-uwe.de> Ward Vandewege <ward@gnu.org> +Wilbert Duijvenvoorde <w.a.n.duijvenvoorde@gmail.com> diff --git a/util/superiotool/fintek.c b/util/superiotool/fintek.c index e1ddfd76c4..fd118b75b5 100644 --- a/util/superiotool/fintek.c +++ b/util/superiotool/fintek.c @@ -4,6 +4,7 @@ * Copyright (C) 2006 coresystems GmbH <info@coresystems.de> * Copyright (C) 2007-2008 Uwe Hermann <uwe@hermann-uwe.de> * Copyright (C) 2014 Edward O'Callaghan <eocallaghan@alterapraxis.com> + * Copyright (C) 2014 Wilbert Duijvenvoorde <w.a.n.duijvenvoorde@gmail.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -128,6 +129,52 @@ static const struct superio_registers reg_table[] = { {0x00,0x00,0xcc,0x3c,0x13,0x09,0xc7,0x09,0x63,0x08, 0x0f,0x00,0x00,0x00,0x00,NANA,0x00,NANA,0x06,0x1c, 0x1f,0x86,0x00,0x00,0x00,0x07,0x00,EOT}}, + {EOT}}}, + {0x1408, "F71869E/ED", { + /* We assume reserved bits are read as 0. */ + {NOLDN, NULL, + {0x02,0x07,0x20,0x21,0x23,0x24,0x26,0x27,0x28,0x29, + 0x2a,0x2b,0x2d,EOT}, + {0x00,0x00,0x08,0x14,0x19,0x34,0x00,NANA,0x38,0x6f, + 0x07,0x0f,0x28,EOT}}, + {0x00, "FDC", + {0x30,0x60,0x61,0x70,0x74,0xf0,0xf2,0xf4,EOT}, + {0x01,0x03,0xf0,0x06,0x02,0x0e,0x03,0x00,EOT}}, + {0x01, "UART1", + {0x30,0x60,0x61,0x70,0xf0,EOT}, + {0x01,0x03,0xf8,0x04,0x00,EOT}}, + {0x02, "UART2", + {0x30,0x60,0x61,0x70,0xf0,0xf1,EOT}, + {0x01,0x02,0xf8,0x03,0x00,0x04,EOT}}, + {0x03, "Parallel port", + {0x30,0x60,0x61,0x70,0x74,0xf0,EOT}, + {0x01,0x03,0x78,0x07,0x03,0x42,EOT}}, + {0x04, "Hardware Monitor", + {0x30,0x60,0x61,0x70,EOT}, + {0x01,0x02,0x95,0x00,EOT}}, + {0x05, "KBC", + {0x30,0x60,0x61,0x70,0x72,0xf0,0xfe,0xff,EOT}, + {0x01,0x00,0x60,0x01,0x0c,0x83,0x81,0x29,EOT}}, + {0x06, "GPIO", + {0x30,0x60,0x61,0x70,0xf0,0xf1,0xf2,0xf3,0xe0,0xe1, + 0xe2,0xe3,0xe4,0xe5,0xe6,0xd0,0xd1,0xd2,0xd3,0xc0, + 0xc1,0xc2,0xb0,0xb1,0xb2,0xb3,0xa0,0xa1,0xa2,0xa3, + 0x90,0x91,0x92,0x93,EOT}, + {0x00,0x00,0x00,0x00,0x00,0x3f,NANA,0x00,0x00,0xff, + NANA,0x00,0x00,0x00,0x00,0x00,0xff,NANA,0x00,0x00, + 0xff,NANA,0x00,0x0f,NANA,0x00,0x00,0x1f,NANA,0x00, + 0x00,0x3f,NANA,0x00,EOT}}, + {0x07, "WDT", + {0xf0,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7,EOT}, + {0x01,0x00,0x00,NANA,0x00,0x0a,0x00,EOT}}, + {0x0a, "PME, ACPI, and EUP Power Saving", + {0x30,0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7,0xe8, + 0xed,0xee,0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7, + 0xf8,0xf9,0xfe,EOT}, + {0x00,0x00,0xcc,0x3c,0x13,0x09,0xc7,0x09,0x63,0x08, + 0x00,0x00,0x00,0x00,0x00,NANA,0x06,0x1c,0x1f,0x86, + 0x00,0x00,0x00,EOT}}, + {EOT}}}, {0x2307, "F71889", { /* We assume reserved bits are read as 0. */ {NOLDN, NULL, @@ -405,7 +452,7 @@ void probe_idregs_fintek(uint16_t port) } printf("Found Fintek %s (vid=0x%04x, id=0x%04x) at 0x%x\n", - get_superio_name(reg_table, did), vid, did, port); + get_superio_name(reg_table, did), vid, did, port); chip_found = 1; dump_superio("Fintek", reg_table, port, did, LDN_SEL); @@ -436,7 +483,7 @@ void probe_idregs_fintek_alternative(uint16_t port) } printf("Found Fintek %s (vid=0x%04x, id=0x%04x) at 0x%x\n", - get_superio_name(reg_table, did), vid, did, port); + get_superio_name(reg_table, did), vid, did, port); chip_found = 1; dump_superio("Fintek", reg_table, port, did, LDN_SEL); |