summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/mainboard/intel/xe7501devkit/Config.lb224
-rw-r--r--src/mainboard/intel/xe7501devkit/Options.lb234
-rw-r--r--src/mainboard/intel/xe7501devkit/acpi_tables.c118
-rw-r--r--src/mainboard/intel/xe7501devkit/auto.c92
-rw-r--r--src/mainboard/intel/xe7501devkit/bus.h17
-rw-r--r--src/mainboard/intel/xe7501devkit/chip.h6
-rw-r--r--src/mainboard/intel/xe7501devkit/cmos.layout55
-rw-r--r--src/mainboard/intel/xe7501devkit/failover.c47
-rw-r--r--src/mainboard/intel/xe7501devkit/ioapic.h11
-rw-r--r--src/mainboard/intel/xe7501devkit/irq_tables.c74
-rw-r--r--src/mainboard/intel/xe7501devkit/mainboard.c12
-rw-r--r--src/mainboard/intel/xe7501devkit/mptable.c180
-rw-r--r--src/mainboard/intel/xe7501devkit/no_vgarom.S6
-rw-r--r--src/mainboard/intel/xe7501devkit/reset.c5
-rw-r--r--src/mainboard/intel/xe7501devkit/vgarom.S6
15 files changed, 1087 insertions, 0 deletions
diff --git a/src/mainboard/intel/xe7501devkit/Config.lb b/src/mainboard/intel/xe7501devkit/Config.lb
new file mode 100644
index 0000000000..65ea45b566
--- /dev/null
+++ b/src/mainboard/intel/xe7501devkit/Config.lb
@@ -0,0 +1,224 @@
+##################################################################
+## BEGIN BOILERPLATE - DO NOT EDIT
+##
+## Compute the location and size of where this firmware image
+## (linuxBIOS plus payload) will live in the boot rom chip.
+##
+if USE_FALLBACK_IMAGE
+# The fallback image uses FALLBACK_SIZE bytes at the end of the ROM
+
+ default ROM_SECTION_SIZE = FALLBACK_SIZE
+ default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
+
+else
+# The normal image goes at the beginning of the LinuxBIOS ROM region
+# and uses all the remaining space
+
+ default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE )
+ default ROM_SECTION_OFFSET = 0
+end
+
+##
+## Compute where this copy of linuxBIOS will start in the boot rom
+##
+default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE )
+
+##
+## Compute a range of ROM that can cached to speed up linuxBIOS,
+## execution speed.
+##
+## XIP_ROM_SIZE must be a power of 2.
+## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
+default XIP_ROM_SIZE = 65536
+default XIP_ROM_BASE = ((( _ROMBASE + ROM_IMAGE_SIZE ) / XIP_ROM_SIZE ) * XIP_ROM_SIZE - XIP_ROM_SIZE )
+
+## END BOILERPLATE
+##################################################################
+
+arch i386 end
+
+##
+## Build the objects we have code for in this directory.
+##
+
+driver mainboard.o
+if HAVE_MP_TABLE object mptable.o end
+if HAVE_PIRQ_TABLE object irq_tables.o end
+if HAVE_ACPI_TABLES object acpi_tables.o end
+object reset.o
+
+# Include the VGA option ROM, but only if we're compiled to use it
+if CONFIG_PCI_ROM_RUN
+ if CONFIG_CONSOLE_VGA
+ object vgarom.S
+ else
+ object no_vgarom.S
+ end
+else
+ object no_vgarom.S
+end
+
+##
+## Romcc output
+##
+makerule ./failover.E
+ depends "$(MAINBOARD)/failover.c ./romcc"
+ action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
+end
+
+makerule ./failover.inc
+ depends "$(MAINBOARD)/failover.c ./romcc"
+ action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
+end
+
+makerule ./auto.E
+ depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
+ action "./romcc -E -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+end
+makerule ./auto.inc
+ depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
+ action "./romcc -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+end
+
+##
+## Build our 16 bit and 32 bit linuxBIOS entry code
+##
+mainboardinit cpu/x86/16bit/entry16.inc
+mainboardinit cpu/x86/32bit/entry32.inc
+ldscript /cpu/x86/16bit/entry16.lds
+ldscript /cpu/x86/32bit/entry32.lds
+
+##
+## Build our reset vector (This is where linuxBIOS is entered)
+##
+if HAVE_FALLBACK_BOOT
+ if USE_FALLBACK_IMAGE
+ mainboardinit cpu/x86/16bit/reset16.inc
+ ldscript /cpu/x86/16bit/reset16.lds
+ else
+ mainboardinit cpu/x86/32bit/reset32.inc
+ ldscript /cpu/x86/32bit/reset32.lds
+ end
+else
+ mainboardinit cpu/x86/16bit/reset16.inc
+ ldscript /cpu/x86/16bit/reset16.lds
+end
+
+### Should this be in the northbridge code?
+mainboardinit arch/i386/lib/cpu_reset.inc
+
+##
+## Include an id string (For safe flashing)
+##
+mainboardinit arch/i386/lib/id.inc
+ldscript /arch/i386/lib/id.lds
+
+###
+### This is the early phase of linuxBIOS startup
+### Things are delicate and we test to see if we should
+### failover to another image.
+###
+if USE_FALLBACK_IMAGE
+ ldscript /arch/i386/lib/failover.lds
+ mainboardinit ./failover.inc
+end
+
+###
+### O.k. We aren't just an intermediary anymore!
+###
+
+##
+## Setup RAM
+##
+mainboardinit cpu/x86/fpu/enable_fpu.inc
+mainboardinit cpu/x86/mmx/enable_mmx.inc
+mainboardinit cpu/x86/sse/enable_sse.inc
+mainboardinit ./auto.inc
+mainboardinit cpu/x86/sse/disable_sse.inc
+mainboardinit cpu/x86/mmx/disable_mmx.inc
+
+##
+## Include the secondary Configuration files
+##
+dir /pc80
+
+if CONFIG_CHIP_NAME
+ config chip.h
+end
+
+# based on sample config for tyan/s2735
+chip northbridge/intel/e7501
+ device pci_domain 0 on
+ device pci 0.0 on end # Chipset host controller
+ device pci 0.1 on end # Host RASUM controller
+ device pci 2.0 on # Hub interface B
+ chip southbridge/intel/i82870 # P64H2
+ device pci 1c.0 on end # IOAPIC - bus B
+ device pci 1d.0 on end # Hub to PCI-B bridge
+ device pci 1e.0 on end # IOAPIC - bus A
+ device pci 1f.0 on end # Hub to PCI-A bridge
+ end
+ end
+ device pci 3.0 off end # Hub interface C (82808AA connector - disable for now)
+ device pci 4.0 on # Hub interface D
+ chip southbridge/intel/i82870 # P64H2
+ device pci 1c.0 on end # IOAPIC - bus B
+ device pci 1d.0 on end # Hub to PCI-B bridge
+ device pci 1e.0 on end # IOAPIC - bus A
+ device pci 1f.0 on end # Hub to PCI-A bridge
+ end
+ end
+ device pci 6.0 on end # E7501 Power management registers? (undocumented)
+ chip southbridge/intel/i82801ca
+ device pci 1d.0 off end # USB (might not work, Southbridge code needs looking at)
+ device pci 1d.1 off end # USB (not populated)
+ device pci 1d.2 off end # USB (not populated)
+ device pci 1e.0 on # Hub to PCI bridge
+ chip drivers/pci/onboard # VGA ROM
+ device pci 0.0 on end
+ register "rom_address" = "_vgarom_start"
+ end
+ end
+ device pci 1f.0 on # LPC bridge
+ chip superio/smsc/lpc47b272
+ device pnp 2e.0 off # Floppy
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ end
+ device pnp 2e.3 off # Parallel Port
+ io 0x60 = 0x378
+ irq 0x70 = 7
+ end
+ device pnp 2e.4 on # Com1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.5 off # Com2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.7 on # Keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1 # Keyboard interrupt
+ irq 0x72 = 12 # Mouse interrupt
+ end
+ device pnp 2e.a off end # ACPI
+ end
+ end
+ device pci 1f.1 on end # IDE
+ device pci 1f.3 on end # SMBus
+ device pci 1f.5 off end # AC97 Audio
+ device pci 1f.6 off end # AC97 Modem
+ end # SB
+ end # PCI_DOMAIN
+ device apic_cluster 0 on
+ chip cpu/intel/socket_mPGA604_533Mhz
+ device apic 0 on end
+ end
+ chip cpu/intel/socket_mPGA604_533Mhz
+ device apic 6 on end
+ end
+ end
+end
diff --git a/src/mainboard/intel/xe7501devkit/Options.lb b/src/mainboard/intel/xe7501devkit/Options.lb
new file mode 100644
index 0000000000..b034ed6158
--- /dev/null
+++ b/src/mainboard/intel/xe7501devkit/Options.lb
@@ -0,0 +1,234 @@
+uses HAVE_MP_TABLE
+uses HAVE_ACPI_TABLES
+uses HAVE_PIRQ_TABLE
+uses HAVE_FALLBACK_BOOT
+uses HAVE_OPTION_TABLE
+uses IRQ_SLOT_COUNT
+uses CONFIG_MAX_CPUS
+uses CONFIG_LOGICAL_CPUS
+uses CONFIG_MAX_PHYSICAL_CPUS
+uses CONFIG_IOAPIC
+uses CONFIG_SMP
+uses CONFIG_ROM_STREAM
+uses STACK_SIZE
+uses HEAP_SIZE
+uses USE_OPTION_TABLE
+uses LB_CKS_RANGE_START
+uses LB_CKS_RANGE_END
+uses LB_CKS_LOC
+uses MAINBOARD_PART_NUMBER
+uses MAINBOARD_VENDOR
+uses MAINBOARD
+uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
+uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
+uses _RAMBASE
+uses TTYS0_BAUD
+uses TTYS0_BASE
+uses TTYS0_LCS
+uses DEFAULT_CONSOLE_LOGLEVEL
+uses MAXIMUM_CONSOLE_LOGLEVEL
+uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
+uses CONFIG_CONSOLE_SERIAL8250
+uses CONFIG_UDELAY_TSC
+uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
+uses HAVE_INIT_TIMER
+uses CONFIG_GDB_STUB
+uses CROSS_COMPILE
+uses CC
+uses HOSTCC
+uses OBJCOPY
+uses CONFIG_CHIP_NAME
+uses CONFIG_CONSOLE_VGA
+uses CONFIG_PCI_ROM_RUN
+uses DEBUG
+uses CPU_OPT
+uses CONFIG_IDE
+
+## The default definitions are used for these
+uses CONFIG_ROM_STREAM_START
+uses PAYLOAD_SIZE
+
+## These are defined in target Config.lb, don't add here
+uses USE_FALLBACK_IMAGE
+uses ROM_SIZE
+uses ROM_IMAGE_SIZE
+uses FALLBACK_SIZE
+uses LINUXBIOS_EXTRA_VERSION
+
+## These are defined in mainboard Config.lb, don't add here
+uses ROM_SECTION_SIZE
+uses ROM_SECTION_OFFSET
+uses _ROMBASE
+uses XIP_ROM_SIZE
+uses XIP_ROM_BASE
+
+###
+### Build options
+###
+
+##
+## Build code for the fallback boot?
+##
+default HAVE_FALLBACK_BOOT=0
+
+
+## Delay timer options
+##
+default CONFIG_UDELAY_TSC=1
+default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
+
+##
+## Build code to export a programmable irq routing table
+##
+default HAVE_PIRQ_TABLE=1
+default IRQ_SLOT_COUNT=12
+
+##
+## Build code to export an x86 MP table
+## Useful for specifying IRQ routing values
+##
+default HAVE_MP_TABLE=1
+
+## Build code to export ACPI tables?
+default HAVE_ACPI_TABLES=1
+
+##
+## Build code to export a CMOS option table?
+##
+default HAVE_OPTION_TABLE=0
+
+## CMOS checksum definitions (units == bytes)
+## These must match the checksum record in cmos.layout
+default LB_CKS_RANGE_START=128
+default LB_CKS_RANGE_END=130
+default LB_CKS_LOC=131
+
+##
+## Build code for SMP support
+## Only worry about 2 micro processors
+## NOTE: CONFIG_MAX_CPUS is the number of LOGICAL CPUs,
+## so if CONFIG_LOGICAL_CPUS is 1, CONFIG_MAX_CPUS should be 4.
+##
+default CONFIG_SMP=1
+default CONFIG_MAX_CPUS=2
+default CONFIG_LOGICAL_CPUS=0
+default CONFIG_MAX_PHYSICAL_CPUS=2
+
+# VGA Console
+# NOTE: to initialize VGA, need to copy the VGA option ROM from the factory BIOS
+# to VGA.rom
+default CONFIG_CONSOLE_VGA=0
+default CONFIG_PCI_ROM_RUN=0
+
+##
+## Build code to setup a generic IOAPIC
+##
+default CONFIG_IOAPIC=1
+
+##
+## Motherboard identification
+##
+default MAINBOARD_PART_NUMBER="EIDXE7501DEVKIT"
+default MAINBOARD_VENDOR="Intel"
+default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x8086
+default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2480
+
+###
+### LinuxBIOS layout values
+###
+
+##
+## Use a small 8K stack
+##
+default STACK_SIZE=0x2000
+
+##
+## Use a small 16K heap
+##
+default HEAP_SIZE=0x4000
+
+##
+## CMOS settings not currently supported due to conflicts with factory BIOS
+##
+default USE_OPTION_TABLE = 0
+
+##
+## LinuxBIOS C code runs at this location in RAM
+##
+default _RAMBASE=0x00004000
+
+##
+## Load the payload from the ROM
+##
+default CONFIG_ROM_STREAM = 1
+
+###
+### Defaults of options that you may want to override in the target config file
+###
+
+##
+## The default compiler
+##
+default CC="$(CROSS_COMPILE)gcc -m32"
+default HOSTCC="gcc"
+
+##
+## Disable the gdb stub by default
+##
+default CONFIG_GDB_STUB=0
+
+##
+## The Serial Console
+##
+
+# To Enable the Serial Console
+default CONFIG_CONSOLE_SERIAL8250=1
+
+## Select the serial console baud rate
+default TTYS0_BAUD=115200
+#default TTYS0_BAUD=57600
+#default TTYS0_BAUD=38400
+#default TTYS0_BAUD=19200
+#default TTYS0_BAUD=9600
+#default TTYS0_BAUD=4800
+#default TTYS0_BAUD=2400
+#default TTYS0_BAUD=1200
+
+# Select the serial console base port
+default TTYS0_BASE=0x3f8
+
+# Select the serial protocol
+# This defaults to 8 data bits, 1 stop bit, and no parity
+default TTYS0_LCS=0x3
+
+##
+### Select the linuxBIOS loglevel
+##
+## EMERG 1 system is unusable
+## ALERT 2 action must be taken immediately
+## CRIT 3 critical conditions
+## ERR 4 error conditions
+## WARNING 5 warning conditions
+## NOTICE 6 normal but significant condition
+## INFO 7 informational
+## DEBUG 8 debug-level messages
+## SPEW 9 Way too many details
+
+## Request this level of debugging output
+default DEFAULT_CONSOLE_LOGLEVEL=8
+## At a maximum only compile in this level of debugging
+default MAXIMUM_CONSOLE_LOGLEVEL=8
+
+##
+## Select power on after power fail setting
+default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
+
+## Things we may not have
+default CONFIG_IDE=1
+
+default DEBUG=1
+default CPU_OPT="-g"
+default CONFIG_CHIP_NAME=1
+
+### End Options.lb
+end
diff --git a/src/mainboard/intel/xe7501devkit/acpi_tables.c b/src/mainboard/intel/xe7501devkit/acpi_tables.c
new file mode 100644
index 0000000000..94cdb871ef
--- /dev/null
+++ b/src/mainboard/intel/xe7501devkit/acpi_tables.c
@@ -0,0 +1,118 @@
+/*
+ * Ported to Intel XE7501DEVKIT from Island Aruma
+ * written by Stefan Reinauer <stepan@openbios.org>
+ * (C) 2005 Stefan Reinauer
+ * (C) 2005 Digital Design Corporation
+ */
+
+#include <console/console.h>
+#include <string.h>
+#include <arch/acpi.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <assert.h>
+#include "bus.h"
+#include "ioapic.h"
+
+unsigned long acpi_dump_apics(unsigned long current)
+{
+ unsigned int irq_start = 0;
+ device_t dev = 0;
+ struct resource* res = NULL;
+
+
+ // SJM: Hard-code CPU LAPIC entries for now
+ // Use SourcePoint numbering of processors
+ current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 0, 6);
+ current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 1, 7);
+ current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 2, 0);
+ current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 3, 1);
+
+
+ // Southbridge IOAPIC
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_ICH3, 0xfec00000, irq_start);
+ irq_start += INTEL_IOAPIC_NUM_INTERRUPTS;
+
+ // P64H2#2 Bus A IOAPIC
+ dev = dev_find_slot(PCI_BUS_E7501_HI_B, PCI_DEVFN(30, 0));
+ if (!dev)
+ BUG(); // Config.lb error?
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_P64H2_2_BUS_A, res->base, irq_start);
+ irq_start += INTEL_IOAPIC_NUM_INTERRUPTS;
+
+ // P64H2#2 Bus B IOAPIC
+ dev = dev_find_slot(PCI_BUS_E7501_HI_B, PCI_DEVFN(28, 0));
+ if (!dev)
+ BUG(); // Config.lb error?
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_P64H2_2_BUS_B, res->base, irq_start);
+ irq_start += INTEL_IOAPIC_NUM_INTERRUPTS;
+
+
+ // P64H2#1 Bus A IOAPIC
+ dev = dev_find_slot(PCI_BUS_E7501_HI_D, PCI_DEVFN(30, 0));
+ if (!dev)
+ BUG(); // Config.lb error?
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_P64H2_1_BUS_A, res->base, irq_start);
+ irq_start += INTEL_IOAPIC_NUM_INTERRUPTS;
+
+ // P64H2#1 Bus B IOAPIC
+ dev = dev_find_slot(PCI_BUS_E7501_HI_D, PCI_DEVFN(28, 0));
+ if (!dev)
+ BUG(); // Config.lb error?
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_P64H2_1_BUS_B, res->base, irq_start);
+ irq_start += INTEL_IOAPIC_NUM_INTERRUPTS;
+
+ // Map ISA IRQ 0 to IRQ 2
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)current, 1, 0, 2, 0);
+
+ // IRQ9 differs from ISA standard - ours is active high, level-triggered
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)current, 0, 9, 9, 0xD);
+
+ return current;
+}
+
+
+unsigned long write_acpi_tables(unsigned long start)
+{
+ unsigned long current;
+ acpi_rsdp_t *rsdp;
+ acpi_rsdt_t *rsdt;
+ acpi_madt_t *madt;
+
+ /* Align ACPI tables to 16byte */
+ start = ( start + 0x0f ) & -0x10;
+ current = start;
+
+ printk_info("ACPI: Writing ACPI tables at %lx...\n", start);
+
+ /* We need at least an RSDP and an RSDT Table */
+ rsdp = (acpi_rsdp_t *) current;
+ current += sizeof(acpi_rsdp_t);
+ rsdt = (acpi_rsdt_t *) current;
+ current += sizeof(acpi_rsdt_t);
+
+ /* clear all table memory */
+ memset((void *)start, 0, current - start);
+
+ acpi_write_rsdp(rsdp, rsdt);
+ acpi_write_rsdt(rsdt);
+
+ /*
+ * We explicitly add these tables later on:
+ */
+ /* QNX wants an MADT */
+ printk_debug("ACPI: * MADT\n");
+
+ madt = (acpi_madt_t *) current;
+ acpi_create_madt(madt);
+ current+=madt->header.length;
+ acpi_add_table(rsdt,madt);
+
+ printk_info("ACPI: done.\n");
+ return current;
+}
+
diff --git a/src/mainboard/intel/xe7501devkit/auto.c b/src/mainboard/intel/xe7501devkit/auto.c
new file mode 100644
index 0000000000..8c635720af
--- /dev/null
+++ b/src/mainboard/intel/xe7501devkit/auto.c
@@ -0,0 +1,92 @@
+#define ASSEMBLY 1
+
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/romcc_io.h>
+#include <cpu/x86/lapic.h>
+#include <arch/cpu.h>
+#include "option_table.h"
+#include "pc80/mc146818rtc_early.c"
+#include "pc80/serial.c"
+#include "arch/i386/lib/console.c"
+#include "ram/ramtest.c"
+#include "southbridge/intel/i82801ca/i82801ca_early_smbus.c"
+#include "northbridge/intel/e7501/raminit.h"
+#include "cpu/x86/lapic/boot_cpu.c"
+#include "northbridge/intel/e7501/debug.c"
+#include "superio/smsc/lpc47b272/lpc47b272_early_serial.c"
+#include "cpu/x86/mtrr/earlymtrr.c"
+#include "cpu/x86/bist.h"
+
+#define SUPERIO_PORT 0x2e
+#define SERIAL_DEV PNP_DEV(SUPERIO_PORT, LPC47B272_SP1)
+
+static void hard_reset(void)
+{
+ outb(0x0e, 0x0cf9);
+}
+
+static inline void activate_spd_rom(const struct mem_controller *ctrl)
+{
+ /* nothing to do */
+}
+
+static inline int spd_read_byte(unsigned device, unsigned address)
+{
+ return smbus_read_byte(device, address);
+}
+
+#include "northbridge/intel/e7501/raminit.c"
+#include "northbridge/intel/e7501/reset_test.c"
+#include "sdram/generic_sdram.c"
+
+
+// This function MUST appear last (ROMCC limitation)
+static void main(unsigned long bist)
+{
+ static const struct mem_controller memctrl[] = {
+ {
+ .d0 = PCI_DEV(0, 0, 0),
+ .d0f1 = PCI_DEV(0, 0, 1),
+ .channel0 = { (0xa<<3)|0, (0xa<<3)|1, (0xa<<3)|2, 0 },
+ .channel1 = { (0xa<<3)|4, (0xa<<3)|5, (0xa<<3)|6, 0 },
+ },
+ };
+
+ if (bist == 0)
+ {
+ // Skip this if there was a built in self test failure
+
+ early_mtrr_init();
+ enable_lapic();
+ }
+
+ // Get the serial port running and print a welcome banner
+
+ lpc47b272_enable_serial(SERIAL_DEV, TTYS0_BASE);
+ uart_init();
+ console_init();
+
+ // Halt if there was a built in self test failure
+ report_bist_failure(bist);
+
+// print_pci_devices();
+
+ // If this is a warm boot, some initialization can be skipped
+
+ if (!bios_reset_detected())
+ {
+ enable_smbus();
+// dump_spd_registers(&memctrl[0]);
+// dump_smbus_registers();
+
+// memreset_setup(); No-op for this chipset
+ sdram_initialize(sizeof(memctrl)/sizeof(memctrl[0]), memctrl);
+ }
+
+ // NOTE: ROMCC dies with an internal compiler error
+ // if the following line is removed.
+ print_debug("SDRAM is up.\r\n");
+}
diff --git a/src/mainboard/intel/xe7501devkit/bus.h b/src/mainboard/intel/xe7501devkit/bus.h
new file mode 100644
index 0000000000..0a99bb2808
--- /dev/null
+++ b/src/mainboard/intel/xe7501devkit/bus.h
@@ -0,0 +1,17 @@
+#ifndef XE7501DEVKIT_BUS_H_INCLUDED
+#define XE7501DEVKIT_BUS_H_INCLUDED
+
+// These were determined by seeing how LinuxBIOS enumerates the various
+// PCI (and PCI-like) buses on the board.
+
+#define PCI_BUS_CHIPSET 0
+#define PCI_BUS_E7501_HI_B 1 // P64H2#2
+#define PCI_BUS_P64H2_2_B 2 // P64H2#2 bus B
+#define PCI_BUS_P64H2_2_A 3 // P64H2#2 bus A
+#define PCI_BUS_E7501_HI_D 4 // P64H2#1
+#define PCI_BUS_P64H2_1_B 5 // P64H2#1 bus B
+#define PCI_BUS_P64H2_1_A 6 // P64H2#1 bus A
+#define PCI_BUS_ICH3 7 // ICH3-S
+#define SUPERIO_BUS 8 // (arbitrary but unique bus #)
+
+#endif // XE7501DEVKIT_BUS_H_INCLUDED
diff --git a/src/mainboard/intel/xe7501devkit/chip.h b/src/mainboard/intel/xe7501devkit/chip.h
new file mode 100644
index 0000000000..b0885c1a54
--- /dev/null
+++ b/src/mainboard/intel/xe7501devkit/chip.h
@@ -0,0 +1,6 @@
+extern unsigned char _vgarom_start[];
+
+extern struct chip_operations mainboard_intel_xe7501devkit_ops;
+
+struct mainboard_intel_xe7501devkit_config {
+};
diff --git a/src/mainboard/intel/xe7501devkit/cmos.layout b/src/mainboard/intel/xe7501devkit/cmos.layout
new file mode 100644
index 0000000000..1aa038d34d
--- /dev/null
+++ b/src/mainboard/intel/xe7501devkit/cmos.layout
@@ -0,0 +1,55 @@
+# NOTE: This file must be in UNIX format (not DOS) or build_opt_tbl fails:
+# "Error - Name is an invalid identifier in line"
+
+entries
+
+#start-bit length config config-ID name
+0 512 r 0 reserved_memory1 # We know nothing about the factory BIOS
+512 512 r 0 reserved_memory2 # More factory BIOS
+
+# Work in progress.
+# This is where we would put the LB RTC_BOOT_BYTE options once the code
+# supports finding them there.
+#1024 1 e 4 boot_option
+#1025 1 e 4 last_boot
+#1026 1 e 1 ECC_memory
+#1028 4 r 0 reboot_bits
+
+# Options used by XE7501DevKit
+#1032 3 e 5 baud_rate
+#1035 1 e 2 hyper_threading
+#1036 1 e 1 power_on_after_fail
+#1037 1 e 1 nmi
+
+#1040 4 e 6 debug_level
+
+#1048 16 h 0 check_sum
+
+
+
+enumerations
+
+#ID value text
+1 0 Disable
+1 1 Enable
+2 0 Enable
+2 1 Disable
+4 0 Fallback
+4 1 Normal
+5 0 115200
+5 1 57600
+5 2 38400
+5 3 19200
+5 4 9600
+5 5 4800
+5 6 2400
+5 7 1200
+6 6 Notice
+6 7 Info
+6 8 Debug
+6 9 Spew
+
+checksums
+
+# Checksum FROM bit-location TO bit-location STORE AT bit-location
+#checksum 1024 1047 1048
diff --git a/src/mainboard/intel/xe7501devkit/failover.c b/src/mainboard/intel/xe7501devkit/failover.c
new file mode 100644
index 0000000000..68a1fec4eb
--- /dev/null
+++ b/src/mainboard/intel/xe7501devkit/failover.c
@@ -0,0 +1,47 @@
+#define ASSEMBLY 1
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <cpu/x86/lapic.h>
+#include "pc80/mc146818rtc_early.c"
+#include "southbridge/intel/i82801ca/cmos_failover.c"
+#include "cpu/x86/lapic/boot_cpu.c"
+#include "northbridge/intel/e7501/reset_test.c"
+
+static unsigned long main(unsigned long bist)
+{
+ /* Is this a deliberate reset by the bios */
+ if (bios_reset_detected() && last_boot_normal()) {
+ goto normal_image;
+ }
+ /* This is the primary cpu how should I boot? */
+ else {
+
+ check_cmos_failed();
+
+ if (do_normal_boot()) {
+ goto normal_image;
+ }
+ else {
+ goto fallback_image;
+ }
+ }
+ normal_image:
+ asm volatile ("jmp __normal_image"
+ : /* outputs */
+ : "a" (bist) /* inputs */
+ : /* clobbers */
+ );
+#if 0
+ cpu_reset:
+ asm volatile ("jmp __cpu_reset"
+ : /* outputs */
+ : "a"(bist) /* inputs */
+ : /* clobbers */
+ );
+#endif
+ fallback_image:
+ return bist;
+}
diff --git a/src/mainboard/intel/xe7501devkit/ioapic.h b/src/mainboard/intel/xe7501devkit/ioapic.h
new file mode 100644
index 0000000000..6db3d949f6
--- /dev/null
+++ b/src/mainboard/intel/xe7501devkit/ioapic.h
@@ -0,0 +1,11 @@
+// IOAPIC addresses determined by LinuxBIOS enumeration.
+// Someday add functions to get APIC IDs and versions from the chips themselves.
+
+#define IOAPIC_ICH3 2
+#define IOAPIC_P64H2_2_BUS_B 3 // IOAPIC 3 at 01:1c.0 MBAR = fe300000 DataAddr = fe300010
+#define IOAPIC_P64H2_2_BUS_A 4 // IOAPIC 4 at 01:1e.0 MBAR = fe301000 DataAddr = fe301010
+#define IOAPIC_P64H2_1_BUS_B 5 // IOAPIC 5 at 04:1c.0 MBAR = fe500000 DataAddr = fe500010
+#define IOAPIC_P64H2_1_BUS_A 8 // IOAPIC 8 at 04:1e.0 MBAR = fe501000 DataAddr = fe501010
+
+#define P64H2_IOAPIC_VERSION 0x20
+#define INTEL_IOAPIC_NUM_INTERRUPTS 24 // Both ICH-3 and P64-H2
diff --git a/src/mainboard/intel/xe7501devkit/irq_tables.c b/src/mainboard/intel/xe7501devkit/irq_tables.c
new file mode 100644
index 0000000000..c30bf2daf2
--- /dev/null
+++ b/src/mainboard/intel/xe7501devkit/irq_tables.c
@@ -0,0 +1,74 @@
+/* Run checkpir to verify any changes to this table...
+ Documentation at : http://www.microsoft.com/whdc/archive/pciirq.mspx
+*/
+
+#include <arch/pirq_routing.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include "bus.h"
+
+#define UNUSED_INTERRUPT {0, 0}
+#define PIRQ_A 0x60
+#define PIRQ_B 0x61
+#define PIRQ_C 0x62
+#define PIRQ_D 0x63
+#define PIRQ_E 0x68
+#define PIRQ_F 0x69
+#define PIRQ_G 0x6A
+#define PIRQ_H 0x6B
+
+const struct irq_routing_table intel_irq_routing_table = {
+ PIRQ_SIGNATURE,
+ PIRQ_VERSION,
+ 32 + 12*sizeof(struct irq_info), // Size of this struct in bytes
+ 0, // PCI bus number on which the interrupt router resides
+ PCI_DEVFN(31, 0), // PCI device/function number of the interrupt router
+ 0, // PCI-exclusive IRQ bitmap
+ PCI_VENDOR_ID_INTEL, // Vendor ID of compatible PCI interrupt router
+ PCI_DEVICE_ID_INTEL_82801CA_LPC, // Device ID of compatible PCI interrupt router
+ 0, // Additional miniport information
+ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, // Reserved, must be zero
+ 0xB1, // Checksum of the entire structure (causes 8-bit sum == 0)
+ {
+ // NOTE: For 82801, a nonzero link value is a pointer to a PIRQ[n]_ROUT register in PCI configuration space
+ // This was determined from linux-2.6.11/arch/i386/pci/irq.c
+ // bitmap of 0xdcf8 == routable to IRQ3-IRQ7, IRQ10-IRQ12, or IRQ14-IRQ15
+ // ICH-3 doesn't allow SERIRQ or PCI message to generate IRQ0, IRQ2, IRQ8, or IRQ13
+ // Not sure why IRQ9 isn't routable (inherited from Tyan S2735)
+
+ // INTA# INTB# INTC# INTD#
+ // bus, device # {link , bitmap}, {link , bitmap}, {link , bitmap}, {link , bitmap}, slot, rfu
+
+ {PCI_BUS_CHIPSET, PCI_DEVFN(31, 0), {{PIRQ_C, 0xdcf8}, {PIRQ_B, 0xdcf8}, UNUSED_INTERRUPT, UNUSED_INTERRUPT}, 0, 0}, // IDE / SMBus
+ {PCI_BUS_CHIPSET, PCI_DEVFN(29, 0), {{PIRQ_A, 0xdcf8}, {PIRQ_D, 0xdcf8}, {PIRQ_C, 0xdcf8}, UNUSED_INTERRUPT}, 0, 0}, // USB 1.1
+
+ // P64H2#2 Bus A
+ {PCI_BUS_P64H2_2_A, PCI_DEVFN(1, 0), {{PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, UNUSED_INTERRUPT, UNUSED_INTERRUPT}, 0, 0}, // SCSI
+ // NOTE: Hotplug disabled on this bus
+
+ // P64H2#2 Bus B
+ {PCI_BUS_P64H2_2_B, PCI_DEVFN(1, 0), {{PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}}, 23, 0}, // Slot 2A (J23)
+ {PCI_BUS_P64H2_2_B, PCI_DEVFN(2, 0), {{PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}}, 24, 0}, // Slot 2B (J24)
+ {PCI_BUS_P64H2_2_B, PCI_DEVFN(3, 0), {{PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}}, 25, 0}, // Slot 2C (J25)
+ {PCI_BUS_P64H2_2_B, PCI_DEVFN(4, 0), {{PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}}, 12, 0}, // Slot 2D (J12)
+ // NOTE: Hotplug disabled on this bus
+
+ // P64H2#1 Bus A
+ {PCI_BUS_P64H2_1_A, PCI_DEVFN(1, 0), {{PIRQ_A, 0xdcf8}, {PIRQ_A, 0xdcf8}, {PIRQ_A, 0xdcf8}, {PIRQ_A, 0xdcf8}}, 20, 0}, // Slot 1A (J20)
+ // NOTE: Hotplug disabled on this bus
+
+ // P64H2#1 Bus B
+ {PCI_BUS_P64H2_1_B, PCI_DEVFN(1, 0), {{PIRQ_A, 0xdcf8}, UNUSED_INTERRUPT, UNUSED_INTERRUPT, UNUSED_INTERRUPT}, 0, 0}, // GB Ethernet
+ {PCI_BUS_P64H2_1_B, PCI_DEVFN(2, 0), {{PIRQ_A, 0xdcf8}, {PIRQ_A, 0xdcf8}, {PIRQ_A, 0xdcf8}, {PIRQ_A, 0xdcf8}}, 21, 0}, // Slot 1B (J21)
+ // NOTE: Hotplug disabled on this bus
+
+ // ICH-3 PCI bus
+ {PCI_BUS_ICH3, PCI_DEVFN(0, 0), {{PIRQ_A, 0xdcf8}, UNUSED_INTERRUPT, UNUSED_INTERRUPT, UNUSED_INTERRUPT}, 0, 0}, // Video
+ {PCI_BUS_ICH3, PCI_DEVFN(2, 0), {{PIRQ_C, 0xdcf8}, {PIRQ_D, 0xdcf8}, {PIRQ_A, 0xdcf8}, {PIRQ_B, 0xdcf8}}, 11, 0}, // Debug slot (J11)
+ }
+};
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+ return copy_pirq_routing_table(addr);
+}
diff --git a/src/mainboard/intel/xe7501devkit/mainboard.c b/src/mainboard/intel/xe7501devkit/mainboard.c
new file mode 100644
index 0000000000..38639b9d39
--- /dev/null
+++ b/src/mainboard/intel/xe7501devkit/mainboard.c
@@ -0,0 +1,12 @@
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include "chip.h"
+
+#if CONFIG_CHIP_NAME == 1
+struct chip_operations mainboard_intel_xe7501devkit_ops = {
+ CHIP_NAME("Intel Xeon E7501 DevKit mainboard")
+};
+#endif
diff --git a/src/mainboard/intel/xe7501devkit/mptable.c b/src/mainboard/intel/xe7501devkit/mptable.c
new file mode 100644
index 0000000000..7dae29c450
--- /dev/null
+++ b/src/mainboard/intel/xe7501devkit/mptable.c
@@ -0,0 +1,180 @@
+#include <console/console.h>
+#include <arch/smp/mpspec.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+#include <assert.h>
+#include "bus.h"
+#include "ioapic.h"
+
+// Generate MP-table IRQ numbers for PCI devices.
+#define INT_A 0
+#define INT_B 1
+#define INT_C 2
+#define INT_D 3
+#define PCI_IRQ(dev, intLine) (((dev)<<2) | intLine)
+
+
+void xe7501devkit_register_buses(struct mp_config_table *mc)
+{
+ // Bus ID, Bus Type
+ smp_write_bus(mc, PCI_BUS_CHIPSET, BUSTYPE_PCI);
+ smp_write_bus(mc, PCI_BUS_E7501_HI_B, BUSTYPE_PCI);
+ smp_write_bus(mc, PCI_BUS_P64H2_2_B, BUSTYPE_PCI);
+ smp_write_bus(mc, PCI_BUS_P64H2_2_A, BUSTYPE_PCI);
+ smp_write_bus(mc, PCI_BUS_E7501_HI_D, BUSTYPE_PCI);
+ smp_write_bus(mc, PCI_BUS_P64H2_1_B, BUSTYPE_PCI);
+ smp_write_bus(mc, PCI_BUS_P64H2_1_A, BUSTYPE_PCI);
+ smp_write_bus(mc, PCI_BUS_ICH3, BUSTYPE_PCI);
+ smp_write_bus(mc, SUPERIO_BUS, BUSTYPE_ISA);
+}
+
+void xe7501devkit_register_ioapics(struct mp_config_table *mc)
+{
+ device_t dev;
+ struct resource *res;
+
+ // TODO: Gack. This is REALLY ugly.
+
+ // Southbridge IOAPIC
+ smp_write_ioapic(mc, IOAPIC_ICH3, 0x20, 0xfec00000); // APIC ID, Version, Address
+
+ // P64H2#2 Bus A IOAPIC
+ dev = dev_find_slot(PCI_BUS_E7501_HI_B, PCI_DEVFN(30, 0));
+ if (!dev)
+ BUG(); // Config.lb error?
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ smp_write_ioapic(mc, IOAPIC_P64H2_2_BUS_A, P64H2_IOAPIC_VERSION, res->base);
+
+ // P64H2#2 Bus B IOAPIC
+ dev = dev_find_slot(PCI_BUS_E7501_HI_B, PCI_DEVFN(28, 0));
+ if (!dev)
+ BUG(); // Config.lb error?
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ smp_write_ioapic(mc, IOAPIC_P64H2_2_BUS_B, P64H2_IOAPIC_VERSION, res->base);
+
+
+ // P64H2#1 Bus A IOAPIC
+ dev = dev_find_slot(PCI_BUS_E7501_HI_D, PCI_DEVFN(30, 0));
+ if (!dev)
+ BUG(); // Config.lb error?
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ smp_write_ioapic(mc, IOAPIC_P64H2_1_BUS_A, P64H2_IOAPIC_VERSION, res->base);
+
+ // P64H2#1 Bus B IOAPIC
+ dev = dev_find_slot(PCI_BUS_E7501_HI_D, PCI_DEVFN(28, 0));
+ if (!dev)
+ BUG(); // Config.lb error?
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ smp_write_ioapic(mc, IOAPIC_P64H2_1_BUS_B, P64H2_IOAPIC_VERSION, res->base);
+}
+
+void xe7501devkit_register_interrupts(struct mp_config_table *mc)
+{
+ // Chipset PCI bus
+ // Type Trigger | Polarity Bus ID IRQ APIC ID PIN#
+ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, PCI_BUS_CHIPSET, 0, MP_APIC_ALL, 0);
+ smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, PCI_BUS_CHIPSET, 0, MP_APIC_ALL, 1);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_CHIPSET, PCI_IRQ(29, INT_A), IOAPIC_ICH3, 16); // USB 1.1 Controller #1
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_CHIPSET, PCI_IRQ(31, INT_B), IOAPIC_ICH3, 17); // SMBus
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_CHIPSET, PCI_IRQ(29, INT_C), IOAPIC_ICH3, 18); // USB 1.1 Controller #3
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_CHIPSET, PCI_IRQ(31, INT_C), IOAPIC_ICH3, 18); // IDE
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_CHIPSET, PCI_IRQ(29, INT_D), IOAPIC_ICH3, 19); // USB 1.1 Controller #2
+
+ // P64H2#2 Bus B
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(1, INT_A), IOAPIC_P64H2_2_BUS_B, 0); // Slot 2A (J23)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(1, INT_B), IOAPIC_P64H2_2_BUS_B, 1); // Slot 2A (J23)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(1, INT_C), IOAPIC_P64H2_2_BUS_B, 2); // Slot 2A (J23)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(1, INT_D), IOAPIC_P64H2_2_BUS_B, 3); // Slot 2A (J23)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(2, INT_A), IOAPIC_P64H2_2_BUS_B, 4); // Slot 2B (J24)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(2, INT_B), IOAPIC_P64H2_2_BUS_B, 5); // Slot 2B (J24)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(2, INT_C), IOAPIC_P64H2_2_BUS_B, 6); // Slot 2B (J24)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(2, INT_D), IOAPIC_P64H2_2_BUS_B, 7); // Slot 2B (J24)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(3, INT_A), IOAPIC_P64H2_2_BUS_B, 8); // Slot 2C (J25)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(3, INT_B), IOAPIC_P64H2_2_BUS_B, 9); // Slot 2C (J25)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(3, INT_C), IOAPIC_P64H2_2_BUS_B, 10); // Slot 2C (J25)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(3, INT_D), IOAPIC_P64H2_2_BUS_B, 11); // Slot 2C (J25)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(4, INT_A), IOAPIC_P64H2_2_BUS_B, 12); // Slot 2D (J12)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(4, INT_B), IOAPIC_P64H2_2_BUS_B, 13); // Slot 2D (J12)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(4, INT_C), IOAPIC_P64H2_2_BUS_B, 14); // Slot 2D (J12)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(4, INT_D), IOAPIC_P64H2_2_BUS_B, 15); // Slot 2D (J12)
+
+ // P64H2#2 Bus A
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_A, PCI_IRQ(1, INT_A), IOAPIC_P64H2_2_BUS_A, 0); // SCSI
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_A, PCI_IRQ(1, INT_B), IOAPIC_P64H2_2_BUS_A, 1); // SCSI
+
+ // P64H2#1 Bus B
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_B, PCI_IRQ(1, INT_A), IOAPIC_P64H2_1_BUS_B, 0); // GB Ethernet
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_B, PCI_IRQ(2, INT_A), IOAPIC_P64H2_1_BUS_B, 4); // Slot 1B (J21)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_B, PCI_IRQ(2, INT_B), IOAPIC_P64H2_1_BUS_B, 5); // Slot 1B (J21)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_B, PCI_IRQ(2, INT_C), IOAPIC_P64H2_1_BUS_B, 6); // Slot 1B (J21)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_B, PCI_IRQ(2, INT_D), IOAPIC_P64H2_1_BUS_B, 7); // Slot 1B (J21)
+
+ // P64H2#1 Bus A
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_A, PCI_IRQ(1, INT_A), IOAPIC_P64H2_1_BUS_A, 0); // Slot 1A (J20)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_A, PCI_IRQ(1, INT_B), IOAPIC_P64H2_1_BUS_A, 1); // Slot 1A (J20)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_A, PCI_IRQ(1, INT_C), IOAPIC_P64H2_1_BUS_A, 2); // Slot 1A (J20)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_A, PCI_IRQ(1, INT_D), IOAPIC_P64H2_1_BUS_A, 3); // Slot 1A (J20)
+
+ // ICH-3
+
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_ICH3, PCI_IRQ(0, INT_A), IOAPIC_ICH3, 16); // Video
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_ICH3, PCI_IRQ(2, INT_A), IOAPIC_ICH3, 18); // Debug slot (J11)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_ICH3, PCI_IRQ(2, INT_B), IOAPIC_ICH3, 19); // Debug slot (J11)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_ICH3, PCI_IRQ(2, INT_C), IOAPIC_ICH3, 16); // Debug slot (J11)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_ICH3, PCI_IRQ(2, INT_D), IOAPIC_ICH3, 17); // Debug slot (J11)
+
+ // TODO: Not sure how to handle BT_INTR# signals from the P64H2s. Do we even need to, in APIC mode?
+
+ // Super I/O (ISA interrupts)
+ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 0, IOAPIC_ICH3, 0);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 1, IOAPIC_ICH3, 1);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 0, IOAPIC_ICH3, 2);
+
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 3, IOAPIC_ICH3, 3);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 4, IOAPIC_ICH3, 4);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 6, IOAPIC_ICH3, 6);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 8, IOAPIC_ICH3, 8);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 9, IOAPIC_ICH3, 9);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 12, IOAPIC_ICH3, 12);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 13, IOAPIC_ICH3, 13);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 14, IOAPIC_ICH3, 14);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 15, IOAPIC_ICH3, 15);
+}
+
+void* smp_write_config_table(void* v)
+{
+ static const char sig[4] = MPC_SIGNATURE;
+ static const char oem[8] = "INTEL ";
+ static const char productid[12] = "XE7501DEVKIT";
+ struct mp_config_table *mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+ memset(mc, 0, sizeof(*mc));
+
+ memcpy(mc->mpc_signature, sig, sizeof(sig));
+ memcpy(mc->mpc_oem, oem, sizeof(oem));
+ memcpy(mc->mpc_productid, productid, sizeof(productid));
+
+ mc->mpc_length = sizeof(*mc); // initially just the header
+ mc->mpc_spec = 0x04; // Multiprocessing Spec V1.4
+ mc->mpc_lapic = LAPIC_ADDR;
+
+ smp_write_processors(mc);
+
+ xe7501devkit_register_buses(mc);
+ xe7501devkit_register_ioapics(mc);
+ xe7501devkit_register_interrupts(mc);
+
+ /* Compute the checksums */
+ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
+ mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
+ printk_debug("Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc));
+
+ return smp_next_mpe_entry(mc);
+}
+
+unsigned long write_smp_table(unsigned long addr)
+{
+ void *v;
+ v = smp_write_floating_table(addr);
+ return (unsigned long)smp_write_config_table(v);
+}
diff --git a/src/mainboard/intel/xe7501devkit/no_vgarom.S b/src/mainboard/intel/xe7501devkit/no_vgarom.S
new file mode 100644
index 0000000000..58c1dbb867
--- /dev/null
+++ b/src/mainboard/intel/xe7501devkit/no_vgarom.S
@@ -0,0 +1,6 @@
+ .section .rodata.optionrom
+ .globl _vgarom_start
+_vgarom_start:
+ .word 0xFFFF // Invalid option ROM signature
+ .globl _vgarom_end
+_vgarom_end:
diff --git a/src/mainboard/intel/xe7501devkit/reset.c b/src/mainboard/intel/xe7501devkit/reset.c
new file mode 100644
index 0000000000..349a2bfd29
--- /dev/null
+++ b/src/mainboard/intel/xe7501devkit/reset.c
@@ -0,0 +1,5 @@
+
+void hard_reset(void)
+{
+ i82801ca_hard_reset();
+}
diff --git a/src/mainboard/intel/xe7501devkit/vgarom.S b/src/mainboard/intel/xe7501devkit/vgarom.S
new file mode 100644
index 0000000000..ff7ebf61b9
--- /dev/null
+++ b/src/mainboard/intel/xe7501devkit/vgarom.S
@@ -0,0 +1,6 @@
+ .section .rodata.optionrom
+ .globl _vgarom_start
+_vgarom_start:
+ .incbin "../../../../../src/mainboard/intel/xe7501devkit/vga.rom"
+ .globl _vgarom_end
+_vgarom_end: