summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--src/mainboard/google/brya/Kconfig.name3
-rw-r--r--src/mainboard/google/brya/variants/yaviks/include/variant/gpio.h4
-rw-r--r--src/mainboard/google/brya/variants/yaviks/overridetree.cb251
3 files changed, 252 insertions, 6 deletions
diff --git a/src/mainboard/google/brya/Kconfig.name b/src/mainboard/google/brya/Kconfig.name
index fb8bb5e533..0cb71d4801 100644
--- a/src/mainboard/google/brya/Kconfig.name
+++ b/src/mainboard/google/brya/Kconfig.name
@@ -295,6 +295,9 @@ config BOARD_GOOGLE_YAVIKS
select BOARD_GOOGLE_BASEBOARD_NISSA
select DRIVERS_GENESYSLOGIC_GL9750
select CHROMEOS_WIFI_SAR if CHROMEOS
+ select DRIVERS_GENERIC_GPIO_KEYS
+ select DRIVERS_INTEL_MIPI_CAMERA
+ select HAVE_WWAN_POWER_SEQUENCE
config BOARD_GOOGLE_LISBON
bool "-> Lisbon"
diff --git a/src/mainboard/google/brya/variants/yaviks/include/variant/gpio.h b/src/mainboard/google/brya/variants/yaviks/include/variant/gpio.h
index c4fe342621..c96b01fc15 100644
--- a/src/mainboard/google/brya/variants/yaviks/include/variant/gpio.h
+++ b/src/mainboard/google/brya/variants/yaviks/include/variant/gpio.h
@@ -5,4 +5,8 @@
#include <baseboard/gpio.h>
+#define WWAN_FCPO GPP_D6
+#define WWAN_RST GPP_F12
+#define T2_OFF_MS 20
+
#endif
diff --git a/src/mainboard/google/brya/variants/yaviks/overridetree.cb b/src/mainboard/google/brya/variants/yaviks/overridetree.cb
index d02b79e94d..38bd1b5aa0 100644
--- a/src/mainboard/google/brya/variants/yaviks/overridetree.cb
+++ b/src/mainboard/google/brya/variants/yaviks/overridetree.cb
@@ -2,10 +2,32 @@ fw_config
field DB_USB 0 1
option DB_NONE 0
option DB_1C_1A 1
- end
+ option DB_1C 2
+ option DB_1C_LTE 3
+ end
field WIFI_SAR_ID 2 3
option SAR_ID_0 0
- end
+ end
+ field STYLUS 9
+ option STYLUS_ABSENT 0
+ option STYLUS_PRESENT 1
+ end
+ field SD_CARD 10
+ option SD_PRESENT 0
+ option SD_ABSENT 1
+ end
+ field WFC 11
+ option WFC_ABSENT 0
+ option WFC_MIPI_OVTI8856 1
+ end
+ field MB_HDMI 12
+ option HDMI_ABSENT 0
+ option HDMI_PRESENT 1
+ end
+ field MB_USB 15
+ option MB_1C 0
+ option MB_1C_2A 1
+ end
end
chip soc/intel/alderlake
@@ -63,9 +85,12 @@ chip soc/intel/alderlake
register "typec_aux_bias_pads[0]" = "{.pad_auxp_dc = GPP_E22, .pad_auxn_dc = GPP_E23}"
+ register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)" # USB2 WWAN
register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth port for PCIe WLAN
register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth port for CNVi WLAN
+ register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB3 WWAN
+
# Configure external V1P05/Vnn/VnnSx Rails
register "ext_fivr_settings" = "{
.configure_ext_fivr = 1,
@@ -79,6 +104,7 @@ chip soc/intel/alderlake
#| | required to set up a BAR |
#| | for TPM communication |
#| I2C1 | Touchscreen |
+ #| I2C2 | WCAM |
#| I2C3 | Audio |
#| I2C5 | Trackpad |
#+-------------------+---------------------------+
@@ -102,6 +128,15 @@ chip soc/intel/alderlake
.sda_hold = 30,
}
},
+ .i2c[2] = {
+ .speed = I2C_SPEED_FAST,
+ .speed_config[0] = {
+ .speed = I2C_SPEED_FAST,
+ .scl_lcnt = 158,
+ .scl_hcnt = 79,
+ .sda_hold = 7,
+ }
+ },
.i2c[3] = {
.speed = I2C_SPEED_FAST,
.speed_config[0] = {
@@ -175,6 +210,20 @@ chip soc/intel/alderlake
device generic 0 on end
end
end
+ device ref ipu on
+ chip drivers/intel/mipi_camera
+ register "acpi_uid" = "0x50000"
+ register "acpi_name" = ""IPU0""
+ register "device_type" = "INTEL_ACPI_CAMERA_CIO2"
+
+ register "cio2_num_ports" = "1"
+ register "cio2_lanes_used" = "{2}" # 2 CSI Camera lanes are used
+ register "cio2_lane_endpoint[0]" = ""^I2C2.CAM0""
+ register "cio2_prt[0]" = "1"
+ device generic 0 on end
+ end
+ probe WFC WFC_MIPI_OVTI8856
+ end
device ref i2c1 on
chip drivers/i2c/hid
register "generic.hid" = ""ELAN2513""
@@ -194,6 +243,23 @@ chip soc/intel/alderlake
device i2c 10 on end
end
chip drivers/i2c/hid
+ register "generic.hid" = ""ELAN900C""
+ register "generic.desc" = ""ELAN Touchscreen""
+ register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
+ register "generic.probed" = "1"
+ register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
+ register "generic.reset_delay_ms" = "20"
+ register "generic.reset_off_delay_ms" = "2"
+ register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)"
+ register "generic.stop_delay_ms" = "280"
+ register "generic.stop_off_delay_ms" = "2"
+ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
+ register "generic.enable_delay_ms" = "1"
+ register "generic.has_power_resource" = "1"
+ register "hid_desc_reg_offset" = "0x01"
+ device i2c 15 on end
+ end
+ chip drivers/i2c/hid
register "generic.hid" = ""GTCH7503""
register "generic.desc" = ""G2TOUCH Touchscreen""
register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
@@ -208,6 +274,98 @@ chip soc/intel/alderlake
register "hid_desc_reg_offset" = "0x01"
device i2c 40 on end
end
+ chip drivers/generic/gpio_keys
+ register "name" = ""PENH""
+ register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_LOW(GPP_F13)"
+ register "key.wake_gpe" = "GPE0_DW2_15"
+ register "key.wakeup_route" = "WAKEUP_ROUTE_SCI"
+ register "key.wakeup_event_action" = "EV_ACT_DEASSERTED"
+ register "key.dev_name" = ""EJCT""
+ register "key.linux_code" = "SW_PEN_INSERTED"
+ register "key.linux_input_type" = "EV_SW"
+ register "key.label" = ""pen_eject""
+ device generic 0 on
+ probe STYLUS STYLUS_PRESENT
+ end
+ end
+ end
+ device ref i2c2 on
+ chip drivers/intel/mipi_camera
+ register "acpi_hid" = ""OVTI8856""
+ register "acpi_uid" = "0"
+ register "acpi_name" = ""CAM0""
+ register "chip_name" = ""Ov 8856 Camera""
+ register "device_type" = "INTEL_ACPI_CAMERA_SENSOR"
+ register "has_power_resource" = "1"
+
+ register "ssdb.lanes_used" = "2"
+ register "ssdb.link_used" = "1"
+ register "ssdb.vcm_type" = "0x0C"
+ register "vcm_name" = ""VCM0""
+ register "num_freq_entries" = "2"
+ register "link_freq[0]" = "360000000"
+ register "link_freq[1]" = "180000000"
+ register "remote_name" = ""IPU0""
+
+ #Controls
+ register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3"
+ register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ"
+
+ register "gpio_panel.gpio[0].gpio_num" = "GPP_D15" # EN_PP2800_WCAM_X
+ register "gpio_panel.gpio[1].gpio_num" = "GPP_D16" # EN_PP1800_PP1200_WCAM_X
+ register "gpio_panel.gpio[2].gpio_num" = "GPP_D3" # WCAM_RST_L
+
+ #_ON
+ register "on_seq.ops_cnt" = "5"
+ register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)"
+ register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)"
+ register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)"
+ register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)"
+ register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)"
+
+ #_OFF
+ register "off_seq.ops_cnt" = "4"
+ register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)"
+ register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)"
+ register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)"
+ register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
+
+ device i2c 10 on
+ probe WFC WFC_MIPI_OVTI8856
+ end
+ end
+ chip drivers/intel/mipi_camera
+ register "acpi_uid" = "3"
+ register "acpi_name" = ""VCM0""
+ register "chip_name" = ""DW AF DAC""
+ register "device_type" = "INTEL_ACPI_CAMERA_VCM"
+
+ register "pr0" = ""\\_SB.PCI0.I2C2.CAM0.PRIC""
+ register "vcm_compat" = ""dongwoon,dw9714""
+
+ device i2c 0C on
+ probe WFC WFC_MIPI_OVTI8856
+ end
+ end
+ chip drivers/intel/mipi_camera
+ register "acpi_hid" = "ACPI_DT_NAMESPACE_HID"
+ register "acpi_uid" = "1"
+ register "acpi_name" = ""NVM0""
+ register "chip_name" = ""GT24C08""
+ register "device_type" = "INTEL_ACPI_CAMERA_NVM"
+
+ register "pr0" = ""\\_SB.PCI0.I2C2.CAM0.PRIC""
+
+ register "nvm_size" = "0x2000"
+ register "nvm_pagesize" = "1"
+ register "nvm_readonly" = "1"
+ register "nvm_width" = "0x10"
+ register "nvm_compat" = ""atmel,24c08""
+
+ device i2c 50 on
+ probe WFC WFC_MIPI_OVTI8856
+ end
+ end
end
device ref i2c3 on
chip drivers/i2c/generic
@@ -232,8 +390,18 @@ chip soc/intel/alderlake
register "detect" = "1"
device i2c 15 on end
end
+ chip drivers/i2c/hid
+ register "generic.hid" = ""SYNA0000""
+ register "generic.cid" = ""ACPI0C50""
+ register "generic.desc" = ""Synaptics Touchpad""
+ register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)"
+ register "generic.wake" = "GPE0_DW2_14"
+ register "generic.detect" = "1"
+ register "hid_desc_reg_offset" = "0x20"
+ device i2c 0x2c on end
+ end
end
- device ref hda on
+ device ref hda on
chip drivers/generic/max98357a
register "hid" = ""MX98360A""
register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A11)"
@@ -254,6 +422,21 @@ chip soc/intel/alderlake
device pci 00.0 on end
end
end
+ device ref pcie_rp7 on
+ # Enable SD Card PCIe 7 using clk 3
+ register "pch_pcie_rp[PCH_RP(7)]" = "{
+ .clk_src = 3,
+ .clk_req = 3,
+ .flags = PCIE_RP_HOTPLUG | PCIE_RP_LTR | PCIE_RP_AER,
+ }"
+ chip soc/intel/common/block/pcie/rtd3
+ register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_H13)"
+ register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H12)"
+ register "srcclk_pin" = "3"
+ device generic 0 on end
+ end
+ probe SD_CARD SD_PRESENT
+ end
device ref emmc on end
device ref ish on
chip drivers/intel/ish
@@ -323,16 +506,45 @@ chip soc/intel/alderlake
device ref usb2_port2 on end
end
chip drivers/usb/acpi
+ register "desc" = ""USB2 Type-A Port A0 (MLB)""
+ register "type" = "UPC_TYPE_A"
+ register "use_custom_pld" = "true"
+ register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, RIGHT, ACPI_PLD_GROUP(4, 1))"
+ device ref usb2_port3 on
+ probe MB_USB MB_1C_2A
+ end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB2 Type-A Port A1 (MLB)""
+ register "type" = "UPC_TYPE_A"
+ register "use_custom_pld" = "true"
+ register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, LEFT, ACPI_PLD_GROUP(3, 1))"
+ device ref usb2_port4 on
+ probe MB_USB MB_1C_2A
+ end
+ end
+ chip drivers/usb/acpi
register "desc" = ""USB2 Type-A Port A1 (DB)""
register "type" = "UPC_TYPE_A"
register "use_custom_pld" = "true"
register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, RIGHT, ACPI_PLD_GROUP(3, 1))"
- device ref usb2_port4 on end
+ device ref usb2_port4 on
+ probe DB_USB DB_1C_1A
+ end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB2 WWAN""
+ register "type" = "UPC_TYPE_INTERNAL"
+ device ref usb2_port5 on
+ probe DB_USB DB_1C_LTE
+ end
end
chip drivers/usb/acpi
register "desc" = ""USB2 UFC""
register "type" = "UPC_TYPE_INTERNAL"
- device ref usb2_port6 on end
+ device ref usb2_port6 on
+ probe WFC WFC_MIPI_OVTI8856
+ end
end
chip drivers/usb/acpi
register "desc" = ""USB2 Bluetooth""
@@ -349,11 +561,38 @@ chip soc/intel/alderlake
device ref usb2_port10 on end
end
chip drivers/usb/acpi
+ register "desc" = ""USB3 Type-A Port A0 (MLB)""
+ register "type" = "UPC_TYPE_USB3_A"
+ register "use_custom_pld" = "true"
+ register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, RIGHT, ACPI_PLD_GROUP(4, 1))"
+ device ref usb3_port1 on
+ probe MB_USB MB_1C_2A
+ end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB3 Type-A Port A1 (MLB)""
+ register "type" = "UPC_TYPE_USB3_A"
+ register "use_custom_pld" = "true"
+ register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, LEFT, ACPI_PLD_GROUP(3, 1))"
+ device ref usb3_port2 on
+ probe MB_USB MB_1C_2A
+ end
+ end
+ chip drivers/usb/acpi
register "desc" = ""USB3 Type-A Port A1 (DB)""
register "type" = "UPC_TYPE_USB3_A"
register "use_custom_pld" = "true"
register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, RIGHT, ACPI_PLD_GROUP(3, 1))"
- device ref usb3_port1 on end
+ device ref usb3_port2 on
+ probe DB_USB DB_1C_1A
+ end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB3 WWAN""
+ register "type" = "UPC_TYPE_INTERNAL"
+ device ref usb3_port3 on
+ probe DB_USB DB_1C_LTE
+ end
end
end
end
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 18:45:32 +0000