diff options
| -rw-r--r-- | src/superio/ite/it8772f/superio.c | 61 |
1 files changed, 26 insertions, 35 deletions
diff --git a/src/superio/ite/it8772f/superio.c b/src/superio/ite/it8772f/superio.c index ed46e73559..4d9ea7134f 100644 --- a/src/superio/ite/it8772f/superio.c +++ b/src/superio/ite/it8772f/superio.c @@ -22,21 +22,12 @@ #include <delay.h> #include <stdlib.h> #include <superio/conf_mode.h> +#include <superio/hwm5_conf.h> #include "chip.h" /* FIXME */ #include "it8772f.h" -static inline u8 it8772f_envc_read(struct resource *res, u8 addr) -{ - outb(addr, res->base + 5); - return inb(res->base + 6); -} - -static inline void it8772f_envc_write(struct resource *res, u8 addr, u8 value) -{ - outb(addr, res->base + 5); - outb(value, res->base + 6); -} +/* FIXME: see if the common ITE environment controller code can be used here */ static void it8772f_extemp_force_idle_status(struct resource *res) { @@ -45,7 +36,7 @@ static void it8772f_extemp_force_idle_status(struct resource *res) /* Wait up to 10ms for non-busy state. */ while (retries > 0) { - reg = it8772f_envc_read(res, IT8772F_EXTEMP_STATUS); + reg = pnp_read_hwm5_index(res->base, IT8772F_EXTEMP_STATUS); if ((reg & IT8772F_EXTEMP_STATUS_HOST_BUSY) == 0x0) break; @@ -60,7 +51,7 @@ static void it8772f_extemp_force_idle_status(struct resource *res) * SIO is busy due to unfinished peci transaction. * Re-configure Register 0x8E to terminate processes. */ - it8772f_envc_write(res, IT8772F_EXTEMP_CONTROL, + pnp_write_hwm5_index(res->base, IT8772F_EXTEMP_CONTROL, IT8772F_EXTEMP_CONTROL_AUTO_4HZ | IT8772F_EXTEMP_CONTROL_AUTO_START); } @@ -75,25 +66,25 @@ static void it8772f_enable_peci(struct resource *res, int tmpin) return; /* Enable PECI interface */ - it8772f_envc_write(res, IT8772F_INTERFACE_SELECT, + pnp_write_hwm5_index(res->base, IT8772F_INTERFACE_SELECT, IT8772F_INTERFACE_SEL_PECI | IT8772F_INTERFACE_SPEED_TOLERANCE); /* Setup External Temperature using PECI GetTemp */ - it8772f_envc_write(res, IT8772F_EXTEMP_ADDRESS, + pnp_write_hwm5_index(res->base, IT8772F_EXTEMP_ADDRESS, PECI_CLIENT_ADDRESS); - it8772f_envc_write(res, IT8772F_EXTEMP_COMMAND, + pnp_write_hwm5_index(res->base, IT8772F_EXTEMP_COMMAND, PECI_GETTEMP_COMMAND); - it8772f_envc_write(res, IT8772F_EXTEMP_WRITE_LENGTH, + pnp_write_hwm5_index(res->base, IT8772F_EXTEMP_WRITE_LENGTH, PECI_GETTEMP_WRITE_LENGTH); - it8772f_envc_write(res, IT8772F_EXTEMP_READ_LENGTH, + pnp_write_hwm5_index(res->base, IT8772F_EXTEMP_READ_LENGTH, PECI_GETTEMP_READ_LENGTH); - it8772f_envc_write(res, IT8772F_EXTEMP_CONTROL, + pnp_write_hwm5_index(res->base, IT8772F_EXTEMP_CONTROL, IT8772F_EXTEMP_CONTROL_AUTO_4HZ | IT8772F_EXTEMP_CONTROL_AUTO_START); /* External Temperature reported in TMPINx register */ - it8772f_envc_write(res, IT8772F_ADC_TEMP_CHANNEL_ENABLE, + pnp_write_hwm5_index(res->base, IT8772F_ADC_TEMP_CHANNEL_ENABLE, (tmpin & 3) << 6); } @@ -109,17 +100,17 @@ static void it8772f_enable_tmpin(struct resource *res, int tmpin, if (tmpin != 1 && tmpin != 2) return; - reg = it8772f_envc_read(res, IT8772F_ADC_TEMP_CHANNEL_ENABLE); + reg = pnp_read_hwm5_index(res->base, IT8772F_ADC_TEMP_CHANNEL_ENABLE); switch (mode) { case THERMAL_DIODE: /* Thermal Diode Mode */ - it8772f_envc_write(res, IT8772F_ADC_TEMP_CHANNEL_ENABLE, + pnp_write_hwm5_index(res->base, IT8772F_ADC_TEMP_CHANNEL_ENABLE, reg | tmpin); break; case THERMAL_RESISTOR: /* Thermal Resistor Mode */ - it8772f_envc_write(res, IT8772F_ADC_TEMP_CHANNEL_ENABLE, + pnp_write_hwm5_index(res->base, IT8772F_ADC_TEMP_CHANNEL_ENABLE, reg | (tmpin << 3)); break; default: @@ -128,10 +119,10 @@ static void it8772f_enable_tmpin(struct resource *res, int tmpin, return; } - reg = it8772f_envc_read(res, IT8772F_CONFIGURATION); + reg = pnp_read_hwm5_index(res->base, IT8772F_CONFIGURATION); /* Enable the startup of monitoring operation */ - it8772f_envc_write(res, IT8772F_CONFIGURATION, reg | 0x01); + pnp_write_hwm5_index(res->base, IT8772F_CONFIGURATION, reg | 0x01); } /* @@ -145,41 +136,41 @@ static void it8772f_enable_fan(struct resource *res, int fan, u8 fan_speed) return; /* Enable 6MHz (23.43kHz PWM) active high output */ - reg = it8772f_envc_read(res, IT8772F_FAN_CTL_MODE); + reg = pnp_read_hwm5_index(res->base, IT8772F_FAN_CTL_MODE); reg |= IT8772F_FAN_CTL_ON(fan) | IT8772F_FAN_PWM_CLOCK_6MHZ | IT8772F_FAN_CTL_POLARITY_HIGH; - it8772f_envc_write(res, IT8772F_FAN_CTL_MODE, reg); + pnp_write_hwm5_index(res->base, IT8772F_FAN_CTL_MODE, reg); /* Enable output in smart mode */ - reg = it8772f_envc_read(res, IT8772F_FAN_MAIN_CTL); + reg = pnp_read_hwm5_index(res->base, IT8772F_FAN_MAIN_CTL); reg |= IT8772F_FAN_MAIN_CTL_TAC_SMART(fan); reg |= IT8772F_FAN_MAIN_CTL_TAC_EN(fan); - it8772f_envc_write(res, IT8772F_FAN_MAIN_CTL, reg); + pnp_write_hwm5_index(res->base, IT8772F_FAN_MAIN_CTL, reg); switch (fan) { case 2: /* Enable software operation */ - it8772f_envc_write(res, IT8772F_FAN_CTL2_PWM_MODE, + pnp_write_hwm5_index(res->base, IT8772F_FAN_CTL2_PWM_MODE, IT8772F_FAN_CTL_PWM_MODE_SOFTWARE); /* Disable Smoothing */ - it8772f_envc_write(res, IT8772F_FAN_CTL2_AUTO_MODE, + pnp_write_hwm5_index(res->base, IT8772F_FAN_CTL2_AUTO_MODE, IT8772F_FAN_CTL_AUTO_SMOOTHING_DIS); /* Set a default fan speed */ if (fan_speed) - it8772f_envc_write(res, IT8772F_FAN_CTL2_PWM_START, + pnp_write_hwm5_index(res->base, IT8772F_FAN_CTL2_PWM_START, fan_speed); break; case 3: /* Enable software operation */ - it8772f_envc_write(res, IT8772F_FAN_CTL3_PWM_MODE, + pnp_write_hwm5_index(res->base, IT8772F_FAN_CTL3_PWM_MODE, IT8772F_FAN_CTL_PWM_MODE_SOFTWARE); /* Disable Smoothing */ - it8772f_envc_write(res, IT8772F_FAN_CTL3_AUTO_MODE, + pnp_write_hwm5_index(res->base, IT8772F_FAN_CTL3_AUTO_MODE, IT8772F_FAN_CTL_AUTO_SMOOTHING_DIS); /* Set a default fan speed */ if (fan_speed) - it8772f_envc_write(res, IT8772F_FAN_CTL3_PWM_START, + pnp_write_hwm5_index(res->base, IT8772F_FAN_CTL3_PWM_START, fan_speed); break; } |