summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--src/mainboard/asus/p8z77-m_pro/early_init.c2
-rw-r--r--src/mainboard/google/butterfly/early_init.c6
-rw-r--r--src/mainboard/google/link/early_init.c6
-rw-r--r--src/mainboard/google/parrot/early_init.c6
-rw-r--r--src/mainboard/google/stout/early_init.c6
-rw-r--r--src/mainboard/intel/dcp847ske/romstage.c6
-rw-r--r--src/mainboard/intel/emeraldlake2/early_init.c6
-rw-r--r--src/mainboard/kontron/ktqm77/early_init.c8
-rw-r--r--src/mainboard/lenovo/x220/early_init.c6
-rw-r--r--src/mainboard/roda/rv11/variants/rv11/early_init.c6
-rw-r--r--src/mainboard/roda/rv11/variants/rw11/early_init.c6
-rw-r--r--src/mainboard/samsung/lumpy/early_init.c6
-rw-r--r--src/mainboard/samsung/stumpy/early_init.c6
13 files changed, 0 insertions, 76 deletions
diff --git a/src/mainboard/asus/p8z77-m_pro/early_init.c b/src/mainboard/asus/p8z77-m_pro/early_init.c
index eadf0a93ae..4e41d01bc7 100644
--- a/src/mainboard/asus/p8z77-m_pro/early_init.c
+++ b/src/mainboard/asus/p8z77-m_pro/early_init.c
@@ -103,8 +103,6 @@ void mainboard_fill_pei_data(struct pei_data *pei_data)
.ts_addresses = { 0x00, 0x00, 0x00, 0x00 },
.ec_present = 0, /* Asus 2203 BIOS shows XUECA016, but no EC */
.gbe_enable = 0, /* Board uses no Intel GbE but a RTL8111F */
- .dimm_channel0_disabled = 0, /* Both DIMM enabled */
- .dimm_channel1_disabled = 0, /* Both DIMM enabled */
.max_ddr3_freq = 1600, /* 1333=Sandy; 1600=Ivy */
.usb_port_config = {
/* {enabled, oc_pin, cable len 0x0080=<8inches/20cm} */
diff --git a/src/mainboard/google/butterfly/early_init.c b/src/mainboard/google/butterfly/early_init.c
index d213f7de49..ba30016492 100644
--- a/src/mainboard/google/butterfly/early_init.c
+++ b/src/mainboard/google/butterfly/early_init.c
@@ -94,12 +94,6 @@ void mainboard_fill_pei_data(struct pei_data *pei_data)
.ts_addresses = { 0x00, 0x00, 0x00, 0x00 },
.ec_present = 1,
.ddr3lv_support = 0,
- // 0 = leave channel enabled
- // 1 = disable dimm 0 on channel
- // 2 = disable dimm 1 on channel
- // 3 = disable dimm 0+1 on channel
- .dimm_channel0_disabled = 2,
- .dimm_channel1_disabled = 2,
.max_ddr3_freq = 1600,
.usb_port_config = {
/* enabled USB oc pin length */
diff --git a/src/mainboard/google/link/early_init.c b/src/mainboard/google/link/early_init.c
index 4f710c6904..088d5385ca 100644
--- a/src/mainboard/google/link/early_init.c
+++ b/src/mainboard/google/link/early_init.c
@@ -102,12 +102,6 @@ void mainboard_fill_pei_data(struct pei_data *pei_data)
.ts_addresses = { 0x00, 0x00, 0x00, 0x00 },
.ec_present = 1,
.ddr3lv_support = 1,
- // 0 = leave channel enabled
- // 1 = disable dimm 0 on channel
- // 2 = disable dimm 1 on channel
- // 3 = disable dimm 0+1 on channel
- .dimm_channel0_disabled = 2,
- .dimm_channel1_disabled = 2,
.max_ddr3_freq = 1600,
.usb_port_config = {
/* Empty and onboard Ports 0-7, set to un-used pin OC3 */
diff --git a/src/mainboard/google/parrot/early_init.c b/src/mainboard/google/parrot/early_init.c
index ab8a23f95b..a11dc9163b 100644
--- a/src/mainboard/google/parrot/early_init.c
+++ b/src/mainboard/google/parrot/early_init.c
@@ -71,12 +71,6 @@ void mainboard_fill_pei_data(struct pei_data *pei_data)
.spd_addresses = { 0xA0, 0x00, 0xA4, 0x00 },
.ts_addresses = { 0x00, 0x00, 0x00, 0x00 },
.ec_present = 1,
- // 0 = leave channel enabled
- // 1 = disable dimm 0 on channel
- // 2 = disable dimm 1 on channel
- // 3 = disable dimm 0+1 on channel
- .dimm_channel0_disabled = 2,
- .dimm_channel1_disabled = 2,
.max_ddr3_freq = 1600,
.usb_port_config = {
/* Empty and onboard Ports 0-7, set to un-used pin OC3 */
diff --git a/src/mainboard/google/stout/early_init.c b/src/mainboard/google/stout/early_init.c
index 84ca487d09..6b28e00ded 100644
--- a/src/mainboard/google/stout/early_init.c
+++ b/src/mainboard/google/stout/early_init.c
@@ -108,12 +108,6 @@ void mainboard_fill_pei_data(struct pei_data *pei_data)
.spd_addresses = { 0xA0, 0x00,0xA4,0x00 },
.ts_addresses = { 0x00, 0x00, 0x00, 0x00 },
.ec_present = 1,
- // 0 = leave channel enabled
- // 1 = disable dimm 0 on channel
- // 2 = disable dimm 1 on channel
- // 3 = disable dimm 0+1 on channel
- .dimm_channel0_disabled = 2,
- .dimm_channel1_disabled = 2,
.max_ddr3_freq = 1600,
.usb_port_config = {
/* enabled USB oc pin length */
diff --git a/src/mainboard/intel/dcp847ske/romstage.c b/src/mainboard/intel/dcp847ske/romstage.c
index d52ea3c93d..df8112cdbb 100644
--- a/src/mainboard/intel/dcp847ske/romstage.c
+++ b/src/mainboard/intel/dcp847ske/romstage.c
@@ -32,12 +32,6 @@ void mainboard_fill_pei_data(struct pei_data *pei_data)
.ts_addresses = { 0x00, 0x00, 0x00, 0x00 },
.ec_present = 0,
.gbe_enable = 1,
- // 0 = leave channel enabled
- // 1 = disable dimm 0 on channel
- // 2 = disable dimm 1 on channel
- // 3 = disable dimm 0+1 on channel
- .dimm_channel0_disabled = 2,
- .dimm_channel1_disabled = 2,
.max_ddr3_freq = 1333,
.usb_port_config = {
#define USB_CONFIG(enabled, current, ocpin) { enabled, ocpin, 0x040 * current }
diff --git a/src/mainboard/intel/emeraldlake2/early_init.c b/src/mainboard/intel/emeraldlake2/early_init.c
index e7cd7f95e5..aa481dc780 100644
--- a/src/mainboard/intel/emeraldlake2/early_init.c
+++ b/src/mainboard/intel/emeraldlake2/early_init.c
@@ -68,12 +68,6 @@ void mainboard_fill_pei_data(struct pei_data *pei_data)
.spd_addresses = { 0xa0, 0x00, 0xa4, 0x00 },
.ts_addresses = { 0x00, 0x00, 0x00, 0x00 },
.ec_present = 0,
- // 0 = leave channel enabled
- // 1 = disable dimm 0 on channel
- // 2 = disable dimm 1 on channel
- // 3 = disable dimm 0+1 on channel
- .dimm_channel0_disabled = 2,
- .dimm_channel1_disabled = 2,
.max_ddr3_freq = 1600,
.usb_port_config = {
{ 1, 0, 0x0040 }, /* P0: Front port (OC0) */
diff --git a/src/mainboard/kontron/ktqm77/early_init.c b/src/mainboard/kontron/ktqm77/early_init.c
index fac3da9117..55902db0ed 100644
--- a/src/mainboard/kontron/ktqm77/early_init.c
+++ b/src/mainboard/kontron/ktqm77/early_init.c
@@ -75,14 +75,6 @@ void mainboard_fill_pei_data(struct pei_data *pei_data)
.ec_present = 1,
.gbe_enable = 1,
.ddr3lv_support = 0,
- /*
- * 0 = leave channel enabled
- * 1 = disable dimm 0 on channel
- * 2 = disable dimm 1 on channel
- * 3 = disable dimm 0+1 on channel
- */
- .dimm_channel0_disabled = 2,
- .dimm_channel1_disabled = 2,
.max_ddr3_freq = 1600,
.usb_port_config = {
/* enabled USB oc pin length */
diff --git a/src/mainboard/lenovo/x220/early_init.c b/src/mainboard/lenovo/x220/early_init.c
index eb5bb6ecc9..07a5dbdf93 100644
--- a/src/mainboard/lenovo/x220/early_init.c
+++ b/src/mainboard/lenovo/x220/early_init.c
@@ -30,12 +30,6 @@ void mainboard_fill_pei_data(struct pei_data *pei_data)
.ts_addresses = { 0x00, 0x00, 0x00, 0x00 },
.ec_present = 1,
.gbe_enable = 1,
- // 0 = leave channel enabled
- // 1 = disable dimm 0 on channel
- // 2 = disable dimm 1 on channel
- // 3 = disable dimm 0+1 on channel
- .dimm_channel0_disabled = 2,
- .dimm_channel1_disabled = 2,
.max_ddr3_freq = 1333,
.usb_port_config = {
{ 1, 0, 0x0040 },
diff --git a/src/mainboard/roda/rv11/variants/rv11/early_init.c b/src/mainboard/roda/rv11/variants/rv11/early_init.c
index ce3b0c63b3..37de919551 100644
--- a/src/mainboard/roda/rv11/variants/rv11/early_init.c
+++ b/src/mainboard/roda/rv11/variants/rv11/early_init.c
@@ -29,12 +29,6 @@ void mainboard_fill_pei_data(struct pei_data *const pei_data)
.ec_present = 1,
.gbe_enable = 1,
.ddr3lv_support = 0,
- // 0 = leave channel enabled
- // 1 = disable dimm 0 on channel
- // 2 = disable dimm 1 on channel
- // 3 = disable dimm 0+1 on channel
- .dimm_channel0_disabled = 2,
- .dimm_channel1_disabled = 2,
.max_ddr3_freq = 1600,
.usb_port_config = {
/* Enabled / OC PIN / Length */
diff --git a/src/mainboard/roda/rv11/variants/rw11/early_init.c b/src/mainboard/roda/rv11/variants/rw11/early_init.c
index 9455987298..c18318de1d 100644
--- a/src/mainboard/roda/rv11/variants/rw11/early_init.c
+++ b/src/mainboard/roda/rv11/variants/rw11/early_init.c
@@ -59,12 +59,6 @@ void mainboard_fill_pei_data(struct pei_data *const pei_data)
.ec_present = 1,
.gbe_enable = 1,
.ddr3lv_support = 0,
- // 0 = leave channel enabled
- // 1 = disable dimm 0 on channel
- // 2 = disable dimm 1 on channel
- // 3 = disable dimm 0+1 on channel
- .dimm_channel0_disabled = 0,
- .dimm_channel1_disabled = 0,
.max_ddr3_freq = 1600,
.usb_port_config = {
/* Enabled / OC PIN / Length */
diff --git a/src/mainboard/samsung/lumpy/early_init.c b/src/mainboard/samsung/lumpy/early_init.c
index 276a2c1732..3d4ad805ce 100644
--- a/src/mainboard/samsung/lumpy/early_init.c
+++ b/src/mainboard/samsung/lumpy/early_init.c
@@ -133,12 +133,6 @@ void mainboard_fill_pei_data(struct pei_data *pei_data)
.spd_addresses = { 0xa0, 0x00,0x00,0x00 },
.ts_addresses = { 0x30, 0x00, 0x00, 0x00 },
.ec_present = 1,
- // 0 = leave channel enabled
- // 1 = disable dimm 0 on channel
- // 2 = disable dimm 1 on channel
- // 3 = disable dimm 0+1 on channel
- .dimm_channel0_disabled = 2,
- .dimm_channel1_disabled = 2,
.max_ddr3_freq = 1333,
.usb_port_config = {
{ 1, 0, 0x0080 }, /* P0: Port 0 (OC0) */
diff --git a/src/mainboard/samsung/stumpy/early_init.c b/src/mainboard/samsung/stumpy/early_init.c
index 858313f0c6..d18da567ae 100644
--- a/src/mainboard/samsung/stumpy/early_init.c
+++ b/src/mainboard/samsung/stumpy/early_init.c
@@ -118,12 +118,6 @@ void mainboard_fill_pei_data(struct pei_data *pei_data)
.spd_addresses = { 0xa0, 0x00,0xa4,0x00 },
.ts_addresses = { 0x00, 0x00, 0x00, 0x00 },
.ec_present = 0,
- // 0 = leave channel enabled
- // 1 = disable dimm 0 on channel
- // 2 = disable dimm 1 on channel
- // 3 = disable dimm 0+1 on channel
- .dimm_channel0_disabled = 2,
- .dimm_channel1_disabled = 2,
.max_ddr3_freq = 1333,
.usb_port_config = {
{ 1, 0, 0x0080 }, /* P0: Front port (OC0) */
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 09:04:30 +0000