diff options
| -rw-r--r-- | util/flashrom/board_enable.c | 49 |
1 files changed, 49 insertions, 0 deletions
diff --git a/util/flashrom/board_enable.c b/util/flashrom/board_enable.c index 06553e07f9..e53a4104a1 100644 --- a/util/flashrom/board_enable.c +++ b/util/flashrom/board_enable.c @@ -431,6 +431,53 @@ static int board_artecgroup_dbe6x(const char *name) return 0; } +/** + * Set the specified GPIO on the specified ICHx southbridge to high. + * + * @param name The name of this board. + * @param ich_vendor PCI vendor ID of the specified ICHx southbridge. + * @param ich_device PCI device ID of the specified ICHx southbridge. + * @param gpiobase_reg GPIOBASE register offset in the LPC bridge. + * @param gp_lvl Offset of GP_LVL register in I/O space, relative to GPIOBASE. + * @param gp_lvl_bitmask GP_LVL bitmask (set GPIO bits to 1, all others to 0). + * @param gpio_bit The bit (GPIO) which shall be set to high. + * @return If the write-enable was successful return 0, otherwise return -1. + */ +static int ich_gpio_raise(const char *name, uint16_t ich_vendor, + uint16_t ich_device, uint8_t gpiobase_reg, + uint8_t gp_lvl, uint32_t gp_lvl_bitmask, + unsigned int gpio_bit) +{ + struct pci_dev *dev; + uint16_t gpiobar; + uint32_t reg32; + + dev = pci_dev_find(ich_vendor, ich_device); /* Intel ICHx LPC */ + if (!dev) { + fprintf(stderr, "\nERROR: ICHx LPC dev %4x:%4x not found.\n", + ich_vendor, ich_device); + return -1; + } + + /* Use GPIOBASE register to find the I/O space for GPIO. */ + gpiobar = pci_read_word(dev, gpiobase_reg) & gp_lvl_bitmask; + + /* Set specified GPIO to high. */ + reg32 = INL(gpiobar + gp_lvl); + reg32 |= (1 << gpio_bit); + OUTL(reg32, gpiobar + gp_lvl); + + return 0; +} + +/** + * Suited for ASUS P4B266. + */ +static int ich2_gpio22_raise(const char *name) +{ + return ich_gpio_raise(name, 0x8086, 0x2440, 0x58, 0x0c, 0xffc0, 22); +} + static int board_kontron_986lcd_m(const char *name) { struct pci_dev *dev; @@ -501,6 +548,8 @@ struct board_pciid_enable { }; struct board_pciid_enable board_pciid_enables[] = { + {0x8086, 0x1a30, 0x1043, 0x8070, 0x8086, 0x244b, 0x1043, 0x8028, + NULL, NULL, "ASUS P4B266", ich2_gpio22_raise}, {0x10de, 0x0360, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, "gigabyte", "m57sli", "GIGABYTE GA-M57SLI-S4", it87xx_probe_spi_flash}, {0x10de, 0x03e0, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, |