diff options
4 files changed, 104 insertions, 0 deletions
diff --git a/src/mainboard/google/skyrim/Kconfig b/src/mainboard/google/skyrim/Kconfig index 89fc9cbcd6..b67d6d1a53 100644 --- a/src/mainboard/google/skyrim/Kconfig +++ b/src/mainboard/google/skyrim/Kconfig @@ -124,6 +124,8 @@ config VARIANT_DIR config USE_VARIANT_DXIO_DESCRIPTOR bool + default y if BOARD_GOOGLE_WINTERHOLD + default n help Enable this to allow a variant to override the dxio descriptor values in port_descriptors.c diff --git a/src/mainboard/google/skyrim/variants/baseboard/gpio.c b/src/mainboard/google/skyrim/variants/baseboard/gpio.c index cef3338ccc..932acaaee6 100644 --- a/src/mainboard/google/skyrim/variants/baseboard/gpio.c +++ b/src/mainboard/google/skyrim/variants/baseboard/gpio.c @@ -201,6 +201,8 @@ static const struct soc_amd_gpio romstage_gpio_table[] = { PAD_NFO(GPIO_27, PCIE_RST1_L, HIGH), /* SSD_AUX_RESET_L */ PAD_GPO(GPIO_6, HIGH), + /* CLK_REQ0_L / SSD */ + PAD_NF(GPIO_92, CLK_REQ0_L, PULL_NONE), /* Enable touchscreen, hold in reset */ /* EN_PP3300_TCHSCR */ PAD_GPO(GPIO_131, HIGH), diff --git a/src/mainboard/google/skyrim/variants/winterhold/Makefile.inc b/src/mainboard/google/skyrim/variants/winterhold/Makefile.inc index db72b152a7..26b1ce2b24 100644 --- a/src/mainboard/google/skyrim/variants/winterhold/Makefile.inc +++ b/src/mainboard/google/skyrim/variants/winterhold/Makefile.inc @@ -2,4 +2,7 @@ subdirs-y += ./memory +romstage-y += port_descriptors.c + ramstage-y += gpio.c +ramstage-y += port_descriptors.c diff --git a/src/mainboard/google/skyrim/variants/winterhold/port_descriptors.c b/src/mainboard/google/skyrim/variants/winterhold/port_descriptors.c new file mode 100644 index 0000000000..37edb0261a --- /dev/null +++ b/src/mainboard/google/skyrim/variants/winterhold/port_descriptors.c @@ -0,0 +1,97 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <baseboard/variants.h> +#include <console/console.h> +#include <gpio.h> +#include <soc/platform_descriptors.h> +#include <types.h> + +static const fsp_dxio_descriptor emmc_dxio_descriptors[] = { + { + /* WLAN */ + .engine_type = PCIE_ENGINE, + .port_present = true, + .start_logical_lane = 0, + .end_logical_lane = 0, + .device_number = PCI_SLOT(WLAN_DEVFN), + .function_number = PCI_FUNC(WLAN_DEVFN), + .link_speed_capability = GEN3, + .turn_off_unused_lanes = true, + .link_aspm = ASPM_L1, + .link_aspm_L1_1 = true, + .link_aspm_L1_2 = true, + .clk_req = CLK_REQ2, + }, + { + /* eMMC */ + .engine_type = PCIE_ENGINE, + .port_present = true, + .start_logical_lane = 1, + .end_logical_lane = 1, + .device_number = PCI_SLOT(SD_DEVFN), + .function_number = PCI_FUNC(SD_DEVFN), + .link_speed_capability = GEN3, + .turn_off_unused_lanes = true, + .link_aspm = ASPM_L1, + .link_aspm_L1_1 = true, + .link_aspm_L1_2 = true, + .gpio_group_id = GPIO_27, + .clk_req = CLK_REQ1, + }, +}; + +static const fsp_dxio_descriptor nvme_dxio_descriptors[] = { + { + /* WLAN */ + .engine_type = PCIE_ENGINE, + .port_present = true, + .start_logical_lane = 0, + .end_logical_lane = 0, + .device_number = PCI_SLOT(WLAN_DEVFN), + .function_number = PCI_FUNC(WLAN_DEVFN), + .link_speed_capability = GEN3, + .turn_off_unused_lanes = true, + .link_aspm = ASPM_L1, + .link_aspm_L1_1 = true, + .link_aspm_L1_2 = true, + .clk_req = CLK_REQ2, + }, + { + /* SSD */ + .engine_type = PCIE_ENGINE, + .port_present = true, + .start_logical_lane = 2, + .end_logical_lane = 3, + .device_number = PCI_SLOT(NVME_DEVFN), + .function_number = PCI_FUNC(NVME_DEVFN), + .link_speed_capability = GEN3, + .turn_off_unused_lanes = true, + .link_aspm = ASPM_L1, + .link_aspm_L1_1 = true, + .link_aspm_L1_2 = true, + .gpio_group_id = GPIO_6, + .clk_req = CLK_REQ0, + }, +}; + +#define NVME_CLKREQ_GPIO 92 +void variant_get_dxio_descriptor(const fsp_dxio_descriptor **dxio_descs, size_t *dxio_num) +{ + /* + * We can determine if a device is populated based on the state of the clkreq + * signal. If the device is present, the clkreq is held low by the device. If + * no device is present, clkreq is pulled high by an external pull-up. + * + * This allows checking the state of the NVMe device clkreq signal and enabling + * either eMMC or NVMe based on that. + */ + if (gpio_get(NVME_CLKREQ_GPIO)) { + printk(BIOS_DEBUG, "Enabling eMMC.\n"); + *dxio_num = ARRAY_SIZE(emmc_dxio_descriptors); + *dxio_descs = emmc_dxio_descriptors; + } else { + printk(BIOS_DEBUG, "Enabling NVMe.\n"); + *dxio_num = ARRAY_SIZE(nvme_dxio_descriptors); + *dxio_descs = nvme_dxio_descriptors; + } +} |