diff options
| -rw-r--r-- | src/mainboard/google/hatch/variants/nightfury/overridetree.cb | 54 |
1 files changed, 27 insertions, 27 deletions
diff --git a/src/mainboard/google/hatch/variants/nightfury/overridetree.cb b/src/mainboard/google/hatch/variants/nightfury/overridetree.cb index a35e99df99..a940f8bc19 100644 --- a/src/mainboard/google/hatch/variants/nightfury/overridetree.cb +++ b/src/mainboard/google/hatch/variants/nightfury/overridetree.cb @@ -23,19 +23,19 @@ chip soc/intel/cannonlake # Enable DMIC1 register "PchHdaAudioLinkDmic1" = "1" - register "usb2_ports[0]" = "USB2_PORT_LONG(OC2)" # Type-C Port 0 - register "usb2_ports[1]" = "USB2_PORT_LONG(OC2)" # Type-C Port 1 + register "usb2_ports[0]" = "USB2_PORT_LONG(OC2)" # Type-C Port 0 + register "usb2_ports[1]" = "USB2_PORT_LONG(OC2)" # Type-C Port 1 register "usb2_ports[2]" = "USB2_PORT_EMPTY" register "usb2_ports[3]" = "USB2_PORT_EMPTY" register "usb2_ports[4]" = "USB2_PORT_EMPTY" register "usb2_ports[5]" = "USB2_PORT_EMPTY" - register "usb2_ports[6]" = "USB2_PORT_LONG(OC_SKIP)" # Camera + register "usb2_ports[6]" = "USB2_PORT_LONG(OC_SKIP)" # Camera register "usb2_ports[7]" = "USB2_PORT_EMPTY" register "usb2_ports[8]" = "USB2_PORT_EMPTY" - register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # CnVi BT + register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # CnVi BT - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-C Port 0 - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC2)" # Type-C Port 1 + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-C Port 0 + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC2)" # Type-C Port 1 register "usb3_ports[2]" = "USB3_PORT_EMPTY" register "usb3_ports[3]" = "USB3_PORT_EMPTY" register "usb3_ports[4]" = "USB3_PORT_EMPTY" @@ -72,8 +72,8 @@ chip soc/intel/cannonlake .fall_time_ns = 52, }, .gspi[0] = { - .speed_mhz = 1, - .early_init = 1, + .speed_mhz = 1, + .early_init = 1, }, }" @@ -200,29 +200,29 @@ chip soc/intel/cannonlake device pci 15.0 on chip drivers/i2c/generic - register "hid" = ""ELAN0000"" - register "desc" = ""ELAN Touchpad"" - register "irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPP_A21_IRQ)" - register "probed" = "1" - register "wake" = "GPE0_DW0_21" - device i2c 0x15 on end - end + register "hid" = ""ELAN0000"" + register "desc" = ""ELAN Touchpad"" + register "irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPP_A21_IRQ)" + register "probed" = "1" + register "wake" = "GPE0_DW0_21" + device i2c 0x15 on end + end end # I2C 0 device pci 15.1 on chip drivers/i2c/hid - register "generic.hid" = ""ELAN902C"" - register "generic.desc" = ""ELAN Touchscreen"" - register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_D16_IRQ)" - register "generic.probed" = "1" - register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C12)" - register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D15)" - register "generic.reset_delay_ms" = "20" - register "generic.has_power_resource" = "1" - register "generic.disable_gpio_export_in_crs" = "1" - register "hid_desc_reg_offset" = "0x01" - device i2c 0x10 on end - end + register "generic.hid" = ""ELAN902C"" + register "generic.desc" = ""ELAN Touchscreen"" + register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_D16_IRQ)" + register "generic.probed" = "1" + register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C12)" + register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D15)" + register "generic.reset_delay_ms" = "20" + register "generic.has_power_resource" = "1" + register "generic.disable_gpio_export_in_crs" = "1" + register "hid_desc_reg_offset" = "0x01" + device i2c 0x10 on end + end end # I2C #1 device pci 15.2 off end # I2C #2 |