diff options
| -rw-r--r-- | src/mainboard/google/hatch/variants/nightfury/overridetree.cb | 86 |
1 files changed, 23 insertions, 63 deletions
diff --git a/src/mainboard/google/hatch/variants/nightfury/overridetree.cb b/src/mainboard/google/hatch/variants/nightfury/overridetree.cb index 316066b2fb..24324b9049 100644 --- a/src/mainboard/google/hatch/variants/nightfury/overridetree.cb +++ b/src/mainboard/google/hatch/variants/nightfury/overridetree.cb @@ -121,81 +121,44 @@ chip soc/intel/cannonlake register "common_soc_config.emmc_dll.emmc_rx_strobe_cntl" = "0x1515" device domain 0 on - device pci 02.0 on # Integrated Graphics Device + device ref igpu on register "gfx" = "GMA_DEFAULT_PANEL(0)" end - device pci 14.0 on + device ref xhci on chip drivers/usb/acpi - device usb 0.0 on + device ref xhci_root_hub on chip drivers/usb/acpi - register "desc" = ""Left Type-C Port"" - register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(1, 1)" - device usb 2.0 on end + device ref usb2_port3 off end end chip drivers/usb/acpi - register "desc" = ""Right Type-C Port"" - register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(2, 1)" - device usb 2.1 on end + device ref usb2_port4 off end end chip drivers/usb/acpi - device usb 2.2 off end + device ref usb2_port5 off end end chip drivers/usb/acpi - device usb 2.3 off end + device ref usb2_port6 off end end chip drivers/usb/acpi - device usb 2.4 off end + device ref usb2_port8 off end end chip drivers/usb/acpi - device usb 2.5 off end + device ref usb2_port9 off end end chip drivers/usb/acpi - register "desc" = ""Camera"" - register "type" = "UPC_TYPE_INTERNAL" - device usb 2.6 on end + device ref usb3_port3 off end end chip drivers/usb/acpi - device usb 2.7 off end + device ref usb3_port4 off end end chip drivers/usb/acpi - device usb 2.8 off end - end - chip drivers/usb/acpi - register "desc" = ""Bluetooth"" - register "type" = "UPC_TYPE_INTERNAL" - register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C14)" - device usb 2.9 on end - end - chip drivers/usb/acpi - register "desc" = ""Left Type-C Port"" - register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(1, 1)" - device usb 3.0 on end - end - chip drivers/usb/acpi - register "desc" = ""Right Type-C Port"" - register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(2, 1)" - device usb 3.1 on end - end - chip drivers/usb/acpi - device usb 3.2 off end - end - chip drivers/usb/acpi - device usb 3.3 off end - end - chip drivers/usb/acpi - device usb 3.4 off end + device ref usb3_port5 off end end end end end - - device pci 14.5 on end # SDCard - - device pci 15.0 on + device ref sdxc on end + device ref i2c0 on chip drivers/i2c/generic register "hid" = ""ELAN0000"" register "desc" = ""ELAN Touchpad"" @@ -204,9 +167,8 @@ chip soc/intel/cannonlake register "wake" = "GPE0_DW0_21" device i2c 0x15 on end end - end # I2C 0 - - device pci 15.1 on + end + device ref i2c1 on chip drivers/i2c/hid register "generic.hid" = ""ELAN902C"" register "generic.desc" = ""ELAN Touchscreen"" @@ -219,9 +181,8 @@ chip soc/intel/cannonlake register "hid_desc_reg_offset" = "0x01" device i2c 0x10 on end end - end # I2C #1 - - device pci 19.0 on + end + device ref i2c4 on chip drivers/i2c/da7219 # TODO: these settings were copied from another board # with the same chip. verify the settings @@ -258,17 +219,16 @@ chip soc/intel/cannonlake device i2c 0x39 on end end end - # No PCIe WiFi - device pci 1d.5 off end - device pci 1a.0 on end #eMMC - device pci 1f.3 on + device ref pcie_rp14 off end + device ref emmc on end + device ref hda on chip drivers/sof register "spkr_tplg" = "max98390" register "jack_tplg" = "da7219" register "mic_tplg" = "_2ch_pdm0" device generic 0 on end end - end # Intel HDA - end # domain + end + end end |